948 resultados para UPPER LIMIT
Resumo:
EXTRACT (SEE PDF FOR FULL ABSTRACT): Tidal marsh sediments collected from Browns Island in the lower Sacramento/San Joaquin Delta, California, are used to reconstruct environmental variability over the past 6.8 ka. Calibrated radiocarbon dates provide chronostratigraphic control. Trace metal analyses, grain-size variability, organic content, and macrofossils are used to define short- and long-term variations in relative salinity and inundation frequency. Aggradation began in subtidal fresh water conditions about 6.8 ka. Subtidal aggradation of clayey silts continued until about 6.3 ka, when conditions shifted toward a lower intertidal brackish marsh environment. By 5.1 ka, a brackish marsh plain had evolved, with surface water freshening after 4.1 ka. Conditions returned to brackish similar to the present after 2.3 ka.
Resumo:
EXTRACT (SEE PDF FOR FULL ABSTRACT): Variations in temperature that occurred in the North Pacific thermocline (250 to 400 meters) during the 1970s and 1980s are described in both a numerical simulation and XBT observations.
Resumo:
EXTRACT (SEE PDF FOR FULL ABSTRACT): The 1977 climate shift was characterized by low chlorophyll a concentrations and a shift in phytoplankton community composition throughout the upper San Francisco Bay estuary. ... For climate to be a driving force in phytoplankton communities, it must affect mechanisms that control biomass and community composition. The influence of climate on environmental conditions and phytoplankton community composition among water-year types was examined using 19 years of physical, chemical, and phytoplankton data collected monthly at 15 stations throughout the estuary.
Resumo:
A pivotal problem in Bayesian nonparametrics is the construction of prior distributions on the space M(V) of probability measures on a given domain V. In principle, such distributions on the infinite-dimensional space M(V) can be constructed from their finite-dimensional marginals---the most prominent example being the construction of the Dirichlet process from finite-dimensional Dirichlet distributions. This approach is both intuitive and applicable to the construction of arbitrary distributions on M(V), but also hamstrung by a number of technical difficulties. We show how these difficulties can be resolved if the domain V is a Polish topological space, and give a representation theorem directly applicable to the construction of any probability distribution on M(V) whose first moment measure is well-defined. The proof draws on a projective limit theorem of Bochner, and on properties of set functions on Polish spaces to establish countable additivity of the resulting random probabilities.
Resumo:
Vertical distribution of intertidal molluscs in and around Mumbai had been studied. Each species has an upper and lower limit of distribution along the vertical intertidal gradient and are concentrated at particular levels or zones where they find optimum living conditions. Zonation of the intertidal area with reference to molluscs at rocky shores of TIFR, Bandstand and NCPA has similarities. However, there is no similarity in zonation among rocky, sandy and muddy shores. Rocky intertidal zones are more diverse and dense in terms of molluscs. The mid and lower littoral zones have rich diversity. The upper littoral zone at some sites, especially Girgaon chowpatty is totally devoid of molluscs due to anthropogenic activities. Gafrarium divaricatum, Nerita oryzarum, N. polita and Neritina crepidularia have established themselves in all three marked zones, indicating their power to adjust with the wide fluctuations in surrounding environmental conditions.
Resumo:
Weimin, ZOU, lexian YANG, lan JIANG, Shuqin WU, Qi YI, Jianli WU
Resumo:
The effect of varying both the aspect ratio and the coefficient of friction of contacts with elliptical geometry on their elastic shakedown performance has been examined theoretically for surfaces with two types of subsurface hardness or strength profiles. In stepwise hardening the hard layer is of uniform strength while in linear hardening its strength reduces from a maximum at the surface to that of the core at the base of the hardened layer. The shakedown load is expressed as the ratio of the maximum Hertzian pressure to the strength of the core material. As the depth of hardening, expressed as a multiple of the elliptical semi-axis, is increased so the potential shakedown load increases from a level that is appropriate to a uniform half-space of unhardened material to a value reflecting the hardness of the surface and near-surface material. In a step-hardened material, the shakedown limit for a surface 'pummelled' by the passage of a sequence of such loads reaches a cut-off or plateau value, which cannot be exceeded by further increases in hardening depth irrespective of the value of the friction coefficient. For a linear-hardened material the corresponding plateau is approached asymptotically. The work confirms earlier results on the upper bounds on shakedown of both point and line contacts and provides numerical values of shakedown loads for intermediate geometries. In general, the case depth required to achieve a given shakedown limit reduces in moving from a transversely moving nominal line load to an axisymmetric point load.
Resumo:
Although increasing the turbine inlet temperature has traditionally proved the surest way to increase cycle efficiency, recent work suggests that the performance of future gas turbines may be limited by increased cooling flows and losses. Another limiting scenario concerns the effect on cycle performance of real gas properties at high temperatures. Cycle calculations of uncooled gas turbines show that when gas properties are modelled accurately, the variation of cycle efficiency with turbine inlet temperature at constant pressure ratio exhibits a maximum at temperatures well below the stoichiometric limit. Furthermore, the temperature at the maximum decreases with increasing compressor and turbine polytropic efficiency. This behaviour is examined in the context of a two-component model of the working fluid. The dominant influences come from the change of composition of the combustion products with varying air/fuel ratio (particularly the contribution from the water vapour) together with the temperature variation of the specific heat capacity of air. There are implications for future industrial development programmes, particularly in the context of advanced mixed gas-steam cycles.
Resumo:
Phytoplankton (52 species; Bacillariophyceae>Chlorophyceae>Cyanophyceae> Euglenophyceae=Dinophyceae) of Samuajan beel, a tropical floodplain lake, registered identical mean annual richness (30+4 species) in littoral and limnetic regions and depicted 33.3-77.2% and 31.4-81.1% community similarities respectively. Their abundance ranged between 137+54 n/l in littoral (Bacillariophyceae>Chlorophyceae) and 122 ± 45 n/l (Chlorophyceae>Bacillariophyceae) in limnetic communities, comprised about 46% of net plankton and indicated winter peaks. This study depicted moderate species diversity, high evenness and low dominance of phytoplankton; species diversity showed significant direct correlation with richness and evenness and an inverse relationship with dominance. Phytoplankton showed significant positive relationship with transparency and silicate and negative with water temperature, rainfall, chloride and nitrate. Multiple regression revealed that ten abiotic factors accounted for >80-98% of density variations of phytoplankton and the dominant groups. ANOVA depicted trends of significance in abundance of the biotic communities analysed.