Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber-matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.

Heterogeneous photocatalytic degradation of acid dyes in aqueous TiO2 suspensions: Kinetics and toxicity

This work assesses the photocatalytic (TiO2/UV) degradation of a simulated acid dye bath (Yellow 3, Red 51, Blue 74, and auxiliary chemicals). Color and phytotoxicity removal were monitored by spectrophotometry and lettuce (Lactuca sativa) seeds as the test organism, respectively. Mineralization was determined by DOC analyses. Photocatalytic, photolytic, and adsorption experiments were performed, showing that adsorption was negligible. After 240 minutes of irradiation, it was achieved 96% and 78% of color removal with photocatalysis and photolysis, respectively. 37% of mineralization occurred with photocatalysis only. The dye bath was rendered completely non-toxic after 60 minutes of photocatalytic treatment; the same result was only achieved with photolysis after 90 minutes. A kinetic model composed of two first-order in series reactions was used. The first photocatalytic decolorization rate constant was k(1) = 0.062 min(-1) and the second k(2) = 0.0043 min(-1), approximately two times greater than the photolytic ones.

Heterogeneous photocatalytic degradation of reactive dyes in aqueous TiO(2) suspensions: Decolorization kinetics

This work assesses the photocatalytic (TiO(2)/UV) degradation of a simulated reactive dye bath (Black 5, Red 239, Yellow 17, and auxiliary chemicals). Color removal was monitored by spectrophotometry. Mineralization was determined by DOC analyses. Photocatalytic, photolytic, and adsorption experiments were performed, showing that adsorption was negligible. After 30 min of irradiation, it was achieved 97% and 40% of color removal with photocatalysis and photolysis, respectively. No mineralization occurred within 30 min. A kinetic model composed of two, first-order in-series reactions was used. The first photocatalytic decolorization rate constant was k(1) = 2.6 min(-1) and the second k(2) = 0.011 min(-1). The fast decolorization of Reactive Black 5 dye is an indication that the number of azo and vinylsulfone groups in the dye molecule maybe a determining factor for the increased photolytic and photocatalytic color removal and degradation rates. (C) 2008 Elsevier B.V. All rights reserved.

Fakalakalaka : The impact of a Tongan notion of development in a contemporary transnational world

This paper aims to explore a Tongan notion of development –'fakalakalaka' – in light of Western notions of development. Two case studies of international development aid schemes illustrate the impact of Tongan development ideas in practice. Drawing on a number of ethnographers' work on Tonga, 'fakalakalaka' appears broader than the Western notion of development. The latter is characterised by influential ideals of controllability and industrialisation. The notion of development among Tongans, on the other hand, tends to be directed by an underlying persistence that, for instance, reflects Tongan core values regarding social organisation. The production of textile 'koloa', controlled by women, emerges as central to the accomplishment of this three-dimensional development notion of intertwined physical, mental and spiritual aspects. The importance attributed to this specific kind of textile has increased in recent years and found two additional roles, or development strategies, in Tongans' contemporary transnational world.

Förpackningsproduktion samt studie om hur reumatikervänliga förpackningar är idag

AssiDomän Frövi board mill has in cooperation with students from Graphic Technologyat the University of Dalarna a degree project that involves developing package solutionsin carton material from AssiDomän Frövi. This year the basic condition was to use theweights 270g/m2, 300g/m2 and 330g/m2 and choose between Frövi Bright, Frövi Lightand Frövi Carry.The packages were supposed to be in the segments industrial products,chocolate/sweets and beauty products/cosmetics. Two packages were produced in thesegments industrial products and beauty products/cosmetics.The first package, produced in the industrial segment, contains textile color and templatesand the second package is a gift package and contains nail polish.The investigation part of the project deals with how the packages today are fit forrheumatics in opening purpose.

Grafisk profil till ett företag som tillverkar handgjorda textilprodukter av naturmaterial : Hur kan en hemsida kommunicera ett varumärke?

Målet med detta examensarbete var att skapa en grafisk profil till företaget Lyst Form AB som bedriver större delen av sin affärsverksamhet via en hemsida. Företaget säljer handgjorda kläder och accessoarer i lintyg. En teoretisk del i arbetet tar upp hur varumärket kan kommuniceras genom hemsidan. Den grafiska profilen utformades utifrån företagets identitet. Det är viktigt att företaget speglas på ett korrekt sätt. Ett företags identitet kan beskrivas som organisationens själ och den visas utåt i form av bland annat den grafiska profilen. Denna ses därför som en viktig identitetsbärare och den kan kallas för den visuella identiteten. En grafisk profil innehåller bland annat logotyp, profilfärger samt typografi. Företagets målgrupp ansågs vara en viktig del i hela processen eftersom de i slutändan ska tilltalas av den grafiska profilen. Först gjordes en grundlig undersökning och research av företaget för att få en god uppfattning av dess identitet. Även konkurrenterna granskades. En enkätundersökning gjordes för att kunna samla information utifrån målgruppens perspektiv. Denna informationsinsamling gav ett bra underlag och en riktlinje i framtagningen av den grafiska profilen.   Under designprocessens gång diskuterades de logotypförslag som togs fram med hjälp av en sammansatt fokusgrupp. Diskussionen var givande och var till stor nytta i designprocessen. Baserat på den grafiska profilen skapades en layout för hemsidan samt exempel på trycksaker för att visa hur den kan användas. En enklare grafisk manual skapades för att företaget ska kunna synas utåt på ett enhetligt sätt. En sista enkätundersökning gjordes för att se om målet uppnåtts. Resultatet visade att den nya framtagna grafiska profilen var en klar förbättring jämfört mot den nuvarande sett utifrån företagets identitet. I slutändan valde dock företaget en annan logotyp. Detta påvisar svårigheterna i processen att ta fram en grafisk profil. Alla delar i processen är viktiga och undersökningarna är bland annat en av de väsentliga delarna vilka bidrar med en större chans till ett bra slutresultat som tar hänsyn till både företagets och målgruppens åsikter.  

Mechanical behavior of irregular fibers part I : modeling the tensile behavior of linear elastic fibers

Fiber irregularities are inherent to textile fibers, natural fibers in particular. This series of papers examines the impact of fiber irregularity on the mechanical behavior of textile fibers. In the first part, the effect of fiber dimensional irregularities on the tensile behavior of linear elastic fibers is examined, using the finite element method (FEM). Fiber dimensional irregularities are simulated with sine waves of different magnitude and frequency. The results indicate that increasing the level or magnitude of irregularity will decrease the breaking load, breaking elongation and method Young’s modulus of the fiber, while increasing the frequency of irregularity will decrease the breaking load and method Young’s modulus, but the breaking elongation will increase. Fiber dimensional irregularity and the gauge length effect are also simulated in this study.

Using soft systems methodology to address supply chain management problems

This paper reports an investigation of if, and how, Soft Systems Methodology (SSM) might.be used to facilitate better management of industry supply chains. In two workshops involving supply chain managers from the Textile Clothing and Footwear (TCP) industry and industry facilitators, ways in which SSM techniques might supplement existing Supply Chain Management (SCM) workshop approaches have been explored. Specifically, the placement of SSM techniques within a workshop setting, reactions to the techniques, perceived reasons for using SSM, together with strengths and difficulties encountered, have been examined.

Intelligent animal fiber classification with artificial neural networks

Artificial neural networks (ANN) are increasingly used to solve many problems related to pattern recognition and object classification. In this paper, we report on a study using artificial neural networks to classify two kinds of animal fibers: merino and mohair. We have developed two different models, one extracting nine scale parameters with image processing, and the other using an unsupervised artificial neural network to extract features automatically, which are determined in accordance with the complexity of the scale structure and the accuracy of the model. Although the first model can achieve higher accuracy, it requires more effort for image processing and more prior knowledge, since the accuracy of the ANN largely depends on the parameters selected. The second model is more robust than the first, since only raw images are used. Because only ordinary optical images taken with a microscope are employed, we can use the approach for many textile applications without expensive equipment such as scanning electron microscopy.

Effect of synthesis parameters on the electrical conductivity of polypyrrole-coated poly(ethylene terephthalate) fabrics

The effects of pyrrole, anthraquinone-2-sulphonic acid (AQSA) and iron(III) chloride (FeCl3) concentrations, reaction time and temperature on the electrical conductivity of polypyrrole (PPy) - coated poly(ethylene terephthalate) (PET) fabrics were investigated. With an increase in both the AQSA and FeCl3 concentrations, resistivity decreased to a point beyond which higher concentrations led to increased surface resistivity. Erosion of the polymer coating, in dynamic synthesis from continual abrasion, manifested as an exponential increase in the resistance of the coated textile substrate. This was not encountered in static synthesis conditions. Temperature affected the degree of surface and bulk polymerisation. The effect of polymerisation temperature on conductivity was negligible. Conductive polymer coating on textiles through chemical polymerisation enabled a smooth coherent film to encase individual fibres, which did not affect the tactile properties of the host substrate. The optimum FeCl3/pyrrole and AQSA FeCl3/pyrrole molar ratios were found to be 2.22 and 0.40 respectively.

Modeling the tensile behavior of fibers with geometrical and structural irregularities

Virtually all fibers exhibit some dimensional and structural irregularities. These include the conventional textile fibers, the high-performance brittle fibers and even the newly developed nano-fibers. In recent years, we have systematically examined the effect of fiber dimensional irregularities on the mechanical behavior of the irregular fibers. This paper extends our research to include the combined effect of dimensional and structural irregularities, using the finite element method (FEM). The dimensional irregularities are represented by sine waves with a 30 % magnitude of diameter variation while the structural irregularities are represented by longitudinal and horizontal cavities distributed within the fiber structure. The results indicate that fiber geometrical or dimensional variations have a marked influence on the tensile properties of the fiber. It affects not only the values of the breaking load and extension, but also the shape of the load-extension curves. The fiber structural irregularities simulated in this study appear to have little effect on the shape of the load-extension curves.

Minimizing energy consumption of yarn winding in ring spinning

Ring spinning has been and will continue to be an important system for making staple yarns from different fibers in the textile industry. But high power consumption and low productivity remain the two outstanding problems with ring spinning. Based on an analysis of power distribution during yarn winding in ring spinning, models for the ratio of energy consumption to yarn production over a full yarn package are established. Spindle speed, yarn count, and package diameter are the three key parameters affecting this ratio. The effects on energy consumption of these parameters are discussed through a case study. The energy-to-production ratio increases with increased package diameter but decreases with increased spindle speed and/or yarn count (tex). The results will help guide spinners in minimizing energy consumption in ring spinning.

Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution

Photocatalytic oxidation (PCO) process is an effective way to deal with organic pollutants in wastewater which could be difficult to be degraded by conventional biological treatment methods. Normally the TiO2 powder in nanometre size range was directly used as photocatalyst for dye degradation in wastewater. However the titanium dioxide powder was arduous to be recovered from the solution after treatment. In this application, a new form of TiO2 (i.e. pillar pellets ranging from 2.5 to 5.3 mm long and with a diameter of 3.7 mm) was used and investigated for photocatalytic degradation of textile dye effluent. A test system was built with a flat plate reactor (FPR) and UV light source (blacklight and solar simulator as light source respectively) for investigating the effectiveness of the new form of TiO2. It was found that the photocatalytic process under this configuration could efficiently remove colours from textile dyeing effluent. Comparing with the TiO2 powder, the pellet was very easy to recovered from the treated solution and can be reused in multiple times without the significant change on the photocatalytic property. The results also showed that to achieve the same photocatalytic performance, the FPR area by pellets was about 91% smaller than required by TiO2 powder. At least TiO2 pellet could be used as an alternative form of photocatalyst in applications for textile effluent treatment process, also other wastewater treatment processes.

Evaluation of the fineness of degummed bast fibers

Fiber fineness characteristics are important for yarn production and quality. In this paper, degummed bast fibers such as hemp, flax and ramie have been examined with the Optical Fiber Diameter Analyzer (OFDA100 and OFDA2000) systems for fiber fineness, in comparison with the conventional image analysis and the Wira airflow tester. The correlation between the results from these measurements was analysed. The results indicate that there is a significant linear co-relation between the fiber fineness measurement results obtained from those different systems. In addition, the mean fiber width and its coefficient of variation obtained from the OFDA100 system are smaller than those obtained from the OFDA2000 system, due to the difference in sample preparation methods. The OFDA2000 system can also measure the fiber fineness profile along the bast fiber plants, which can be useful for plant breeding.

Evaluating the softness of animal fibers

Softness is an important property of textile fibers, and animal fibers in particular. At present, there is no reliable method for objectively evaluating fiber softness. This paper examines a simple technique of such evaluations by pulling a bundle of parallel fibers through a series of pins. Softer fibers with lower bending rigidities and smoother surfaces should have lower pulling forces. Alpaca and wool fibers are used in this study to validate this technique, and the results suggest that pulling force measurements can reflect differences in fiber softness.