Does the effect of weight lifting on lymphedema following breast cancer differ by diagnostic method: results from a randomized controlled trial

The lymphedema diagnostic method used in descriptive or intervention studies may influence results found. The purposes of this work were to compare baseline lymphedema prevalence in the physical activity and lymphedema (PAL) trial cohort and to subsequently compare the effect of the weight-lifting intervention on lymphedema, according to four standard diagnostic methods. The PAL trial was a randomized controlled intervention study, involving 295 women who had previously been treated for breast cancer, and evaluated the effect of 12 months of weight lifting on lymphedema status. Four diagnostic methods were used to evaluate lymphedema outcomes: (i) interlimb volume difference through water displacement, (ii) interlimb size difference through sum of arm circumferences, (iii) interlimb impedance ratio using bioimpedance spectroscopy, and (iv) a validated self-report survey. Of the 295 women who participated in the PAL trial, between 22 and 52% were considered to have lymphedema at baseline according to the four diagnostic criteria used. No between-group differences were noted in the proportion of women who had a change in interlimb volume, interlimb size, interlimb ratio, or survey score of ≥5, ≥5, ≥10%, and 1 unit, respectively (cumulative incidence ratio at study end for each measure ranged between 0.6 and 0.8, with confidence intervals spanning 1.0). The variation in proportions of women within the PAL trial considered to have lymphoedema at baseline highlights the potential impact of the diagnostic criteria on population surveillance regarding prevalence of this common morbidity of treatment. Importantly though, progressive weight lifting was shown to be safe for women following breast cancer, even for those at risk or with lymphedema, irrespective of the diagnostic criteria used.

Preliminary validation of a novel high-resolution melt-based typing method based on the multilocus sequence typing scheme of Streptococcus pyogenes

The major limitation of current typing methods for Streptococcus pyogenes, such as emm sequence typing and T typing, is that these are based on regions subject to considerable selective pressure. Multilocus sequence typing (MLST) is a better indicator of the genetic backbone of a strain but is not widely used due to high costs. The objective of this study was to develop a robust and cost-effective alternative to S. pyogenes MLST. A 10-member single nucleotide polymorphism (SNP) set that provides a Simpson’s Index of Diversity (D) of 0.99 with respect to the S. pyogenes MLST database was derived. A typing format involving high-resolution melting (HRM) analysis of small fragments nucleated by each of the resolution-optimized SNPs was developed. The fragments were 59–119 bp in size and, based on differences in G+C content, were predicted to generate three to six resolvable HRM curves. The combination of curves across each of the 10 fragments can be used to generate a melt type (MelT) for each sequence type (ST). The 525 STs currently in the S. pyogenes MLST database are predicted to resolve into 298 distinct MelTs and the method is calculated to provide a D of 0.996 against the MLST database. The MelTs are concordant with the S. pyogenes population structure. To validate the method we examined clinical isolates of S. pyogenes of 70 STs. Curves were generated as predicted by G+C content discriminating the 70 STs into 65 distinct MelTs.

Analysing and improving a recruitment process : a teaching case for developing business process improvement capabilities

The demand for Business Process Management (BPM) is rapidly rising and with that, the need for capable BPM professionals is also rising. Yet, only a very few structured BPM training/ education programs are available, across universities and professional trainers globally. The ‘lack of appropriate teaching resources’ has been identified as a critical issue for BPM educators in prior studies. Case-based teaching can be an effective means of educating future BPM professionals. A main reason is that cases create an authentic learning environment where the complexities and challenges of the ‘real world’ can be presented in a narrative enabling the students to develop crucial skills such as problem solving, analysis and creativity-within-constraints, and to apply the tools and techniques within a richer and real (or proxy to real) context. However, so far well documented BPM teaching cases are scarce. This article aims to contribute to address this gap by providing a comprehensive teaching case and teaching notes that facilitates the education of selected process improvement phases, namely identification, modelling, analysis, and improvement. The article is divided into three main parts: (i) Introductory teaching notes, (ii) The case narrative, and (iii) Student activities from the case and teaching notes.

Preservice teachers teaching technology with robotics

This study investigates the value of a robotics-based school engagement experience for preservice teachers enrolled in a fourth year technology education curriculum unit and analyses their perceived abilities and confidence to design and implement engaging technology activities following this experience. Technology is a key learning area in Australian schools but research shows that most teachers find this subject challenging to teach. This could be attributed to teachers’ attitudes and their lack of knowledge, hence investigating preservice teachers’ involvement with technology may provide further insights. In this study, 30 preservice teachers used robotics to implement technology activities with 22 primary school students from a school in a low socio-economic area. Surveys were administered to ascertain the preservice teachers' perceptions of their school engagement experiences. The data gathered from the participants showed that they had gained confidence and knowledge from the experience and felt the engagement activity would assist them to develop and implement technology activities in their future classrooms.

A mixed-method study to investigate the relationship between the number of social support people present during labour, women’s perceptions and birth outcomes

The birth of a baby is a significant event for women and their families, with the event being influenced by the prevailing social and cultural context. Historically, women throughout the world have given birth at home assisted by other women who helped them cope with the stress of labour and birth. In the middle of the twentieth century, the togetherness, caring and support that were provided within the social and cultural context of childbirth began to change; women in most developed countries, and to some extent in developing countries, laboured and gave birth in institutions that isolated them from the support of family and friends. This practice is referred to as the medical model of childbirth and, over time, birthing within this model has come to be viewed by women as a dehumanising experience. In an attempt to secure a more supportive experience, women began to demand the presence of a supportive companion; namely their partner. This event became the catalyst for a number of studies focusing on different types of support providers and their contribution to the phenomenon of social support during labour. More recently, it has become a common practice for some women to be supported during labour by a number of people from their social network. However, research on the influence of such supportive people on women’s experience of labour and birth and on birth outcomes is scarce. The aim of this study is to examine the influence of various support arrangements from a woman’s family and social network on her experience of labour and birth and on birth outcomes. The mixed-method study was conducted to answer three research questions: 1. Do women with more than one support person present during labour and birth have similar perceptions and experiences of support compared to women with one support person? 2. Do women with more than one support person present during labour and birth have similar birth outcomes compared to women with one support person? 3. Do women with different types of support providers during labour and birth have similar birth outcomes? Methods Phase one of this study developed, pilot tested and administered a newly developed instrument designed to measure women’s perceptions of supportive behaviours provided during labour. Specific birth outcome data were extracted from the medical records. Phase two consisted of in-depth interviews with a sample of women who had completed the survey. Results: The results identified a statistically significant relationship between women’s perceptions of social support and the number of support providers: women supported by one person only rated the supportive behaviours of that person more highly compared to women who were supported by a number of people. The results also identified that women supported by one person used less analgesia. An additional qualitative finding was that some women sacrificed the support of female relatives at the request of their partners. Conclusion: By using a mixed-method approach, this study found that women were selective in their choice of support providers, as they chose individuals with whom they had an enduring affectionate attachment. Women place more emphasis on a support person’s ability to fulfil their attachment needs of close proximity and a sense of security and safety, rather than their ability to provide the expected functional supportive behaviours.

Urban pre-service teachers’ conceptions of teaching in rural communities

Encouraging quality teaching staff to apply for and accept teaching placements in rural and remote locations is an ongoing concern internationally. The value of different support mechanisms provided for pre-service teachers attending a rural and remote practicum[1] are investigated through theories of place and the school-community nexus. Qualitative data regarding the experiences of the pre-service teachers were collected through interviews and case study notes. This project adds to our understanding of practicum in rural areas by employing a conceptual understanding of place to propose how the experiences of a four-week practicum may contribute to urban pre-service teachers’ conceptions of work and life in a rural community

Strategy use of children with Down syndrome in a delay of gratification situation

Background: The capacity to delay gratification has been shown to be a very important developmental task for children who are developing typically. There is evidence that children with Down syndrome have more difficulty with a delay of gratification task than typically developing children of the same mental age. This study focused on the strategies children with Down syndrome use while in a delay of gratification situation to ascertain if these contribute to the differences in delay times from those of typically developing children. Method: Thirty-two children with Down syndrome (15 females) and 50 typically developing children participated in the study. Children with Down syndrome had a mental age, as measured by the Stanford-Binet IV, between 36 and 66 months (M = 45.66). The typically developing children had a mean chronological age of 45.76 months. Children participated in a delay of gratification task where they were offered two or one small treats and asked which they preferred. They were then told that they could have the two treats if they waited for the researcher to return (an undisclosed time of 15 min). If they did not want to wait any longer they could call the researcher back but then they could have only one treat. Twenty-two of the children with Down syndrome and 43 of the typically developing children demonstrated understanding of the task and their data are included here. Sessions were videotaped for later analysis. Results: There were significant differences in the mean waiting times of the two groups. The mean of the waiting times for children with Down syndrome was 181.32 s (SD = 347.62) and was 440.21 s (SD = 377.59) for the typically developing children. Eighteen percent of the group with Down syndrome waited for the researcher to return in comparison to 35% of the typically developing group. Sixty-four percent of children with Down syndrome called the researcher back and the remainder (18%) violated. In the typically developing group 37% called the researcher back and 28% violated. The mean waiting time for the group of children with Down syndrome who called the researcher back was 24 s. Examination of strategy use in this group was therefore very limited. There appeared to be quite similar strategy use across the groups who waited the full 15 min. Conclusions: These results confirm the difficulty children with Down syndrome have in delaying gratification. Teaching strategies for waiting, using information drawn from the behaviours of children who are developing typically may be a useful undertaking. Examination of other contributors to delay ability (e.g., language skills) is also likely to be helpful in understanding the difficulties demonstrated in delaying gratification.

Pragmatics, perceptions and strategies in Chinese college English learning

This study investigated Chinese College English students. perceptions of pragmatics, their pragmatic competence in selected speech acts, strategies they employed in acquiring pragmatic knowledge, as well as their general approach to learning English as a foreign language. The research was triggered by a national curriculum initiative that prioritizes the need for College English students to enhance their ability to use English effectively in different social interactions (Chinese College English Education and Supervisory Committee, 2007). The traditional "grammar-translation" and "examination-oriented" method is believed to have reduced Chinese College English students to what is dubbed "mute" and "deaf" language learners (Zhang, 2008; Zhao, 2009). Many students lack pragmatic knowledge on how to interpret discourse by relating utterances to their meanings, understanding the intention of language users, and how language is used in specific settings (Bachman & Palmer, 1996, 2010). There is an increasing body of literature on awareness-raising of the importance of pragmatic knowledge and strategies for classroom instruction. However, to date, researchers have tended to focus largely on the teaching of pragmatics, rather than on how students acquire pragmatic competence (Bardovi-Harlig & Dornyei, 1998; Du, 2004; Hou, 2007; Ruan, 2007; Schauer, 2009). It is this gap in the research that this study fills, with a focus on different types of pragmatic knowledge, learner perceptions of such knowledge, and learning strategies that College English students employ in the process of learning English in general, and pragmatics in particular. Three strands of theories of second language acquisition (Ellis, 1985, 1994): pragmatics (Levinson, 1983; Mey, 2001; Yule, 1996), intercultural communications (Kramsch, 1998; Samovar & Porter, 1997; Samovar, Porter & McDaniel, 2009) and English as a lingua franca (ELF) (Canagarajah, 2006; Firth, 1996; Pennycook, 2010) were employed to establish a conceptual framework for data collection and analyses. Key constructs derived from the three related theories helped to form a typology for a detailed examination and theorization of the empirical evidence gathered from different sources. Four research instruments: a questionnaire (N=237), Discourse Completion Tasks (DCTs) (N=55), focus group interviews (N=18), and a textbook tasks analysis were employed to collect data for this systematic inquiry. Data collected by different instruments were analyzed and compared by way of a triangulation to enhance its validity and reliability. Major findings derived from different sources highlighted that, although College English students were grammatically advanced language learners, they displayed limited pragmatic knowledge and a highly restricted repertoire of language learning strategies. The majority of the respondents, however, believed that pragmatic knowledge was as important as linguistic knowledge in the process of developing communicative competence for interaction in different contexts. It was argued that a combination of a less than sufficient English proficiency, limited knowledge of pragmatics, inadequate language materials and tasks, and a small stock of language learning strategies, were a major hindrance to effective learning and communication, resulting in pragmatic failures in many intercultural communication situations. As the first systematic study of how Chinese College English students learned pragmatics, the research provided a solid empirical base for developing a tentative model for the learning of pragmatics in a College English classroom in China and similar educational contexts. The model was strengthened by a unique combination of theories of pragmatics, intercultural communication and ELF. Findings from this research provided insights into how Chinese College English students perceived pragmatics in the English as foreign language (EFL) curriculum, the processes of learning, as well as strategies they utilized in developing linguistic and pragmatic knowledge and competence.

An improved method to detect damage using modal strain energy based damage index

This paper presents two novel concepts to enhance the accuracy of damage detection using the Modal Strain Energy based Damage Index (MSEDI) with the presence of noise in the mode shape data. Firstly, the paper presents a sequential curve fitting technique that reduces the effect of noise on the calculation process of the MSEDI, more effectively than the two commonly used curve fitting techniques; namely, polynomial and Fourier’s series. Secondly, a probability based Generalized Damage Localization Index (GDLI) is proposed as a viable improvement to the damage detection process. The study uses a validated ABAQUS finite-element model of a reinforced concrete beam to obtain mode shape data in the undamaged and damaged states. Noise is simulated by adding three levels of random noise (1%, 3%, and 5%) to the mode shape data. Results show that damage detection is enhanced with increased number of modes and samples used with the GDLI.

A general method to determine sampling windows for nonlinear mixed effects models with an application to population pharmacokinetic studies

Optimal design methods have been proposed to determine the best sampling times when sparse blood sampling is required in clinical pharmacokinetic studies. However, the optimal blood sampling time points may not be feasible in clinical practice. Sampling windows, a time interval for blood sample collection, have been proposed to provide flexibility in blood sampling times while preserving efficient parameter estimation. Because of the complexity of the population pharmacokinetic models, which are generally nonlinear mixed effects models, there is no analytical solution available to determine sampling windows. We propose a method for determination of sampling windows based on MCMC sampling techniques. The proposed method attains a stationary distribution rapidly and provides time-sensitive windows around the optimal design points. The proposed method is applicable to determine sampling windows for any nonlinear mixed effects model although our work focuses on an application to population pharmacokinetic models.

A common neighbour based two-way collaborative recommendation method

Traditional recommendation methods offer items, that are inanimate and one way recommendation, to users. Emerging new applications such as online dating or job recruitments require reciprocal people-to-people recommendations that are animate and two-way recommendations. In this paper, we propose a reciprocal collaborative method based on the concepts of users' similarities and common neighbors. The dataset employed for the experiment is gathered from a real life online dating network. The proposed method is compared with baseline methods that use traditional collaborative algorithms. Results show the proposed method can achieve noticeably better performance than the baseline methods.

Assessment of “change in flexibility method” in structural health monitoring systems

The modern structural diagnosis process is rely on vibration characteristics to assess safer serviceability level of the structure. This paper examines the potential of change in flexibility method to use in damage detection process and two main practical constraints associated with it. The first constraint addressed in this paper is reduction in number of data acquisition points due to limited number of sensors. Results conclude that accuracy of the change in flexibility method is influenced by the number of data acquisition points/sensor locations in real structures. Secondly, the effect of higher modes on damage detection process has been studied. This addresses the difficulty of extracting higher order modal data with available sensors. Four damage indices have been presented to identify their potential of damage detection with respect to different locations and severity of damage. A simply supported beam with two degrees of freedom at each node is considered only for a single damage cases throughout the paper.