Improving ecological performance of industrialized building systems in Malaysia

For construction stakeholders to fully embrace sustainability, its long-term benefits and associated risks need to be identified through holistic approaches. Consensus among key stakeholders is very important to the improvement of the ecological performance of industrialized building systems (IBS), a building construction method gaining momentum in Malaysia. A questionnaire survey examines the relative significance of 16 potentially important sustainability factors for IBS applications. To present possible solutions,semi-structured interviews solicit views from experienced IBS practitioners, representing the professions involved. Three most critical factors agreed by key stakeholders are material consumption, waste generation and waste disposal. Using SWOT analysis, the positive and negative aspects of these factors are investigated, with action plans formulated for IBS design practitioners. The SWOT analysis based guidelines have the potential to become part of IBS design briefing documents against which sustainability solutions are contemplated, selected and implemented. Existing knowledge on ecological performance issues is extended by considering the unique characteristics of IBS and identifying not only the benefits, but also the potential risks and challenges of pursuing sustainability. This is largely missing in previous research efforts. Findings to date focus on providing much-needed assistance to IBS designers, who are at the forefront of decision-making with a significant level of project influence. Ongoing work will be directed towards other project development phases and consider the inherent linkage between design decisions and subsequent sustainability deliverables in the project life cycle.

Development and validation of an instrument to measure organizational cultures' support of business process management

The purpose of Business Process Management (BPM) is to increase the efficiency and effectiveness of organizational processes through improvement and innovation. Despite a common understanding that culture is an important element in these efforts, there is a dearth of theoretical and empirical research on culture as a facilitator of successful BPM. We develop the BPM culture construct and propose a validated instrument with which to measure organizational cultures’ support of BPM. The operationalization of the BPM culture concept provides a theoretical foundation for future research and a tool to assist organizations in developing a cultural environment that supports successful BPM.

On facilitating regional integration and economic development with collaborative technologies in the South Pacific

The current global economic instability and the vulnerability of small island nations are providing the impetus for greater integration between the countries of the South Pacific region. This exercise is critical for their survival in today’s turbulent economic environment. Past efforts of regional integration in the South Pacific have not been very successful. Reasons attributed to this outcome include issues related to damage of sovereignty, and lack of a shared integration infrastructure. Today, the IT resources with collaborative capacities provide the opportunity to develop a shared IT infrastructure to facilitate integration in the South Pacific. In an attempt to develop a model of regional integration with an IT-backed infrastructure, we identify and report on the antecedents of the current stage of regional integration, and the stakeholders’ perceived benefits of an IT resources backed regional integration in the South Pacific. Employing a case study based approach, the study finds that while most stakeholders were positive about the potential of IT-backed regional integration, significant challenges exist that hinder the realisation of this model. The study finds that facilitating IT-backed regional integration requires enabling IT infrastructure, equitable IT development in the region, greater awareness on the potential of the modern IT resources, market liberalisation of the information and telecommunications sector and greater political support for IT initiatives.

Professional development and technology in second language learning : do best practices work?

This study was undertaken to examine the influence that a set of Professional Development (PD) initiatives had on faculty use of Moodle, a well known Course Management System. The context of the study was a private language university just outside Tokyo, Japan. Specifically, it aimed to identify the way in which the PD initiatives adhered to professional development best practice criteria; how faculty members perceived the PD initiatives; what impact the PD initiatives had on faculty use of Moodle; and other variables that may have influenced faculty in their use of Moodle. The study utilised a mixed methods approach. Participants in the study were 42 teachers who worked at the university in the academic year 2008/9. The online survey consisted of 115 items, factored into 10 constructs. Data was collected through an online survey, semi-structured face-to-face interviews, post-workshop surveys, and a collection of textual artefacts. The quantitative data were analysed in SPSS, using descriptive statistics, Spearman's Rank Order correlation tests and a Kruskal-Wallis means test. The qualitative data was used to develop and expand findings and ideas. The results indicated that the PD initiatives adhered closely to criteria posited in technology-related professional development best practice criteria. Further, results from the online survey, post workshop surveys, and follow up face-to-face interviews indicated that while the PD initiatives that were implemented were positively perceived by faculty, they did not have the anticipated impact on Moodle use among faculty. Further results indicated that other variables, such as perceptions of Moodle, and institutional issues, had a considerable influence on Moodle use. The findings of the study further strengthened the idea that the five variables Everett Rogers lists in his Diffusion of Innovations model, including perceived attributes of an innovation; type of innovation decision; communication channels; nature of the social system; extent of change agents' promotion efforts, most influence the adoption of an innovation. However, the results also indicated that some of the variables in Rogers' DOI seem to have more of an influence than others, particularly the perceived attributes of an innovation variable. In addition, the findings of the study could serve to inform universities that have Course Management Systems (CMS), such as Moodle, about how to utilise them most efficiently and effectively. The findings could also help to inform universities about how to help faculty members acquire the skills necessary to incorporate CMSs into curricula and teaching practice. A limitation of this study was the use of a non-randomised sample, which could appear to have limited the generalisations of the findings to this particular Japanese context.

Decision making guidelines for sustainable construction of industrialised building systems

The construction industry has an obligation to respond to sustainability expectations of our society. Solutions that integrate innovative, intelligent and sustainability deliverables are vital for us to meet new and emerging challenges. Industrialised Building Systems (IBS), or known otherwise as prefabrication, employs a combination of ready-made components in the construction of buildings. They promote quality of production, enhance simplification of construction processes and minimise waste. The unique characteristics of this construction method respond well to sustainability. Despite the promises however, IBS has yet to be effectively implemented in Malaysia. There are often misconceptions among key stakeholders about IBS applications. The existing rating schemes fail to assess IBS against sustainability measures. To ensure the capture of full sustainability potential in buildings developed, the critical factors and action plans agreeable to all participants in the development processes need to be identified. Through questionnaire survey, eighteen critical factors relevant to IBS sustainability were identified and encapsulated into a conceptual framework to coordinate a systematic IBS decision making approach. Five categories were used to separate the critical factors into: ecological performance; economic value; social equity and culture; technical quality; and implementation and enforcement. This categorisation extends the "Triple Bottom Lines" to include social, economic, environmental and institutional dimensions. Semi-structured interviews help identify strategies of actions and solutions of potential problems through a SWOT analysis framework. These tools help the decision-makers maximise the opportunities by using available strengths, avoid weaknesses, and diagnose possible threats in the examined issues. The recommendations formed an integrated action plan to present information on what and how to improve sustainability through tackling each critical factor during IBS development. It can be used as part of the project briefing documents for IBS designers. For validation and finalisation the research deliverables, three case studies were conducted. The research fills a current gap by responding to IBS project scenarios in developing countries. It also provides a balanced view for designers to better understand sustainability potential and prioritize attentions to manage sustainability issues in IBS applications.

Sensemaking and sustainable practicing: Functional affordances of information systems in green transformations

This paper explores how a world-wide operating software solutions provider implemented environmentally sustainable business practices in response to emerging environmental concerns. Through an interpretive case study, we develop a theoretical framework that identifies four important functional affordances originating in information systems, which are required in environmental sustainability transformations as they create an actionable context in which (1) organizations can engage in a sensemaking process related to understanding emerging environmental requirements, and (2) individuals can implement environmentally sustainable work practices. Through our work, we provide several contributions, including a better understanding of IS-enabled organizational change and the types of functional affordances of information systems that are required in sustainability transformations. We describe implications relating to (1) how information systems can contribute to the creation of environmentally sustainable organizations, (2) the design of information systems to create required functional affordances, (3) the management of sustainability transformations, and (4) the further development of the concept of functional affordances in IS research.

An ecological dynamics approach to skill acquisition : implications for development of talent in sport.

This paper proposes how ecological dynamics, a theory focusing on the performer-environment relationship, provides a basis for understanding skill acquisition in sport. From this perspective, learners are conceptualized as complex, neurobiological systems in which inherent self-organisation tendencies support the emergence of adaptive behaviours under a range of interacting task and environmental constraints. Intentions, perceptions and actions are viewed as intertwined processes which underpin functional movement solutions assembled by each learner during skill acquisition. These ideas suggest that skill acquisition programmes need to sample information from the performance environment to guide behaviour in practice tasks. Skill acquisition task protocols should allow performers to use movement variability to explore and create opportunities for action, rather than constraining them to passively receiving information. This conceptualisation also needs to characterize the design of talent evaluation tests, which need to faithfully represent the perception-action relationships in the performance environment. Since the dynamic nature of changing task constraints in sports cannot be predicted over longer timescales, an implication is that talent programmes should focus on developing performance expertise in each individual, rather than over-relying on identification of expert performers at specific points in time.

Development and formative evaluation of a motorcycle rider training intervention to address risk taking

The need to address on-road motorcycle safety in Australia is important due to the disproportionately high percentage of riders and pillions killed and injured each year. One approach to preventing motorcycle-related injury is through training and education. However, motorcycle rider training lacks empirical support as an effective road safety countermeasure to reduce crash involvement. Previous reviews have highlighted that risk-taking is a contributing factor in many motorcycle crashes, rather than merely a lack of vehicle-control skills (Haworth & Mulvihill, 2005; Jonah, Dawson & Bragg, 1982; Watson et al, 1996). Hence, though the basic vehicle-handling skills and knowledge of road rules that are taught in most traditional motorcycle licence training programs may be seen as an essential condition of safe riding, they do not appear to be sufficient in terms of crash reduction. With this in mind there is considerable scope for the improvement of program focus and content for rider training and education. This program of research examined an existing traditional pre-licence motorcycle rider training program and formatively evaluated the addition of a new classroom-based module to address risky riding; the Three Steps to Safer Riding program. The pilot program was delivered in the real world context of the Q-Ride motorcycle licensing system in the state of Queensland, Australia. Three studies were conducted as part of the program of research: Study 1, a qualitative investigation of delivery practices and student learning needs in an existing rider training course; Study 2, an investigation of the extent to which an existing motorcycle rider training course addressed risky riding attitudes and motives; and Study 3, a formative evaluation of the new program. A literature review as well as the investigation of learning needs for motorcyclists in Study 1 aimed to inform the initial planning and development of the Three Steps to Safer Riding program. Findings from Study 1 suggested that the training delivery protocols used by the industry partner training organisation were consistent with a learner-centred approach and largely met the learning needs of trainee riders. However, it also found that information from the course needs to be reinforced by on-road experiences for some riders once licensed and that personal meaning for training information was not fully gained until some riding experience had been obtained. While this research informed the planning and development of the new program, a project team of academics and industry experts were responsible for the formulation of the final program. Study 2 and Study 3 were conducted for the purpose of formative evaluation and program refinement. Study 2 served primarily as a trial to test research protocols and data collection methods with the industry partner organisation and, importantly, also served to gather comparison data for the pilot program which was implemented with the same rider training organisation. Findings from Study 2 suggested that the existing training program of the partner organisation generally had a positive (albeit small) effect on safety in terms of influencing attitudes to risk taking, the propensity for thrill seeking, and intentions to engage in future risky riding. However, maintenance of these effects over time and the effects on riding behaviour remain unclear due to a low response rate upon follow-up 24 months after licensing. Study 3 was a formative evaluation of the new pilot program to establish program effects and possible areas for improvement. Study 3a examined the short term effects of the intervention pilot on psychosocial factors underpinning risky riding compared to the effects of the standard traditional training program (examined in Study 2). It showed that the course which included the Three Steps to Safer Riding program elicited significantly greater positive attitude change towards road safety than the existing standard licensing course. This effect was found immediately following training, and mean scores for attitudes towards safety were also maintained at the 12 month follow-up. The pilot program also had an immediate effect on other key variables such as risky riding intentions and the propensity for thrill seeking, although not significantly greater than the traditional standard training. A low response rate at the 12 month follow-up unfortunately prevented any firm conclusions being drawn regarding the impact of the pilot program on self-reported risky riding once licensed. Study 3a further showed that the use of intermediate outcomes such as self-reported attitudes and intentions for evaluation purposes provides insights into the mechanisms underpinning risky riding that can be changed by education and training. A multifaceted process evaluation conducted in Study 3b confirmed that the intervention pilot was largely delivered as designed, with course participants also rating most aspects of training delivery highly. The complete program of research contributed to the overall body of knowledge relating to motorcycle rider training, with some potential implications for policy in the area of motorcycle rider licensing. A key finding of the research was that psychosocial influences on risky riding can be shaped by structured education that focuses on awareness raising at a personal level and provides strategies to manage future riding situations. However, the formative evaluation was mainly designed to identify areas of improvement for the Three Steps to Safer Riding program and found several areas of potential refinement to improve future efficacy of the program. This included aspects of program content, program delivery, resource development, and measurement tools. The planned future follow-up of program participants' official crash and traffic offence records over time may lend further support for the application of the program within licensing systems. The findings reported in this thesis offer an initial indication that the Three Steps to Safer Riding is a useful resource to accompany skills-based training programs.

Beyond compliance : project on an integrated systems approach for pest risk management in South East Asia

The Beyond Compliance project, which began in July 2011 with funding from the Standards and Trade Development Facility for 2 years, aims to enhance competency and confidence in the South East Asian sub-region by applying a Systems Approach for pest risk management. The Systems Approach involves the use of integrated measures, at least two of which are independent, that cumulatively reduce the risk of introducing exotic pests through trade. Although useful in circumstances where single measures are inappropriate or unavailable, the Systems Approach is inherently more complicated than single-measure approaches, which may inhibit its uptake. The project methodology is to take prototype decision-support tools, such as Control Point-Bayesian Networks (CP-BN), developed in recent plant health initiatives in other regions, including the European PRATIQUE project, and to refine them within this sub-regional context. Case studies of high-priority potential agricultural trade will be conducted by National Plant Protection Organizations of participating South East Asian countries in trials of the tools, before further modifications. Longer term outcomes may include: more robust pest risk management in the region (for exports and imports); greater inclusion of stakeholders in development of pest risk management plans; increased confidence in trade negotiations; and new opportunities for trade.

Ergonomic DHM systems - limitations and trends – a systematic literature review focused on the ‘future of ergonomics’

Digital Human Models (DHM) have been used for over 25 years. They have evolved from simple drawing templates, which are nowadays still used in architecture, to complex and Computer Aided Engineering (CAE) integrated design and analysis tools for various ergonomic tasks. DHM are most frequently used for applications in product design and production planning, with many successful implementations documented. DHM from other domains, as for example computer user interfaces, artificial intelligence, training and education, or the entertainment industry show that there is also an ongoing development towards a comprehensive understanding and holistic modeling of human behavior. While the development of DHM for the game sector has seen significant progress in recent years, advances of DHM in the area of ergonomics have been comparatively modest. As a consequence, we need to question if current DHM systems are fit for the design of future mobile work systems. So far it appears that DHM in Ergonomics are rather limited to some traditional applications. According to Dul et al. (2012), future characteristics of Human Factors and Ergonomics (HFE) can be assigned to six main trends: (1) global change of work systems, (2) cultural diversity, (3) ageing, (4) information and communication technology (ICT), (5) enhanced competiveness and the need for innovation, and; (6) sustainability and corporate social responsibility. Based on a literature review, we systematically investigate the capabilities of current ergonomic DHM systems versus the ‘Future of Ergonomics’ requirements. It is found that DHMs already provide broad functionality in support of trends (1) and (2), and more limited options in regards to trend (3). Today’s DHM provide access to a broad range of national and international databases for correct differentiation and characterization of anthropometry for global populations. Some DHM explicitly address social and cultural modeling of groups of people. In comparison, the trends of growing importance of ICT (4), the need for innovation (5) and sustainability (6) are addressed primarily from a hardware-oriented and engineering perspective and not reflected in DHM. This reflects a persistent separation between hardware design (engineering) and software design (information technology) in the view of DHM – a disconnection which needs to be urgently overcome in the era of software defined user interfaces and mobile devices. The design of a mobile ICT-device is discussed to exemplify the need for a comprehensive future DHM solution. Designing such mobile devices requires an approach that includes organizational aspects as well as technical and cognitive ergonomics. Multiple interrelationships between the different aspects result in a challenging setting for future DHM. In conclusion, the ‘Future of Ergonomics’ pose particular challenges for DHM in regards to the design of mobile work systems, and moreover mobile information access.

A sustainable tourism development in Alacati, Turkey: (Re) invention of public space with clean energy

Although there is an increasing recognition of the impacts of climate change on communities, residents often resist changing their lifestyle to reduce the effects of the problem. By using a landscape architectural design medium, this paper argues that public space, when designed as an ecological system, has the capacity to create social and environmental change and to increase the quality of the human environment. At the same time, this ecological system can engage residents, enrich the local economy, and increase the social network. Through methods of design, research and case study analysis, an alternative master plan is proposed for a sustainable tourism development in Alacati, Turkey. Our master plan uses local geographical, economic and social information within a sustainable landscape architectural design scheme that addresses the key issues of ecology, employment, public space and community cohesion. A preliminary community empowerment model (CEM) is proposed to manage the designs. The designs address: the coexistence of local agricultural and sustainable energy generation; state of the art water management; and the functional and sustainable social and economic interrelationship of inhabitants, NGOs, and local government.

Rethinking sustainable urban development: Towards an integrated planning and development process

A city is the most dramatic manifestation of human activities on the environment. This human dominated organism degrades natural habitats, simplifies species composition, disrupts hydrological systems, and modifies energy flow and nutrient cycling. Sustainable urban development is seen as a panacea to minimise these externalities caused by widespread human activities on the environment. The concept of sustainable urban development has been around over a considerably long-time as the need to adopt environmentally sustainable behaviours made the international community commit to it. However, to date such development has not been achieved in large scales anywhere around the globe. This review paper aims to look at the sustainable urban development concept from the lens of planning and development integration to generate new insights and directions. The paper reports the outcome of the review of the literature on planning and development approaches—i.e., urban planning, ecological planning, urban development, sustainable urban development—and proposes a new process to support the efforts for achieving sustainable urban development—i.e., integrated urban planning and development process. The findings of this review paper highlights that adopting such holistic planning and development process generate a potential to further support the progress towards achieving sustainability agendas of our cities.

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.

Development of a computer based 1D-2D dynamic flood model. Case study of the Pagsangaan river basin in Leyte, the Philippines

Floods are among the most devastating events that affect primarily tropical, archipelagic countries such as the Philippines. With the current predictions of climate change set to include rising sea levels, intensification of typhoon strength and a general increase in the mean annual precipitation throughout the Philippines, it has become paramount to prepare for the future so that the increased risk of floods on the country does not translate into more economic and human loss. Field work and data gathering was done within the framework of an internship at the former German Technical Cooperation (GTZ) in cooperation with the Local Government Unit of Ormoc City, Leyte, The Philippines, in order to develop a dynamic computer based flood model for the basin of the Pagsangaan River. To this end, different geo-spatial analysis tools such as PCRaster and ArcGIS, hydrological analysis packages and basic engineering techniques were assessed and implemented. The aim was to develop a dynamic flood model and use the development process to determine the required data, availability and impact on the results as case study for flood early warning systems in the Philippines. The hope is that such projects can help to reduce flood risk by including the results of worst case scenario analyses and current climate change predictions into city planning for municipal development, monitoring strategies and early warning systems. The project was developed using a 1D-2D coupled model in SOBEK (Deltares Hydrological modelling software package) and was also used as a case study to analyze and understand the influence of different factors such as land use, schematization, time step size and tidal variation on the flood characteristics. Several sources of relevant satellite data were compared, such as Digital Elevation Models (DEMs) from ASTER and SRTM data, as well as satellite rainfall data from the GIOVANNI server (NASA) and field gauge data. Different methods were used in the attempt to partially calibrate and validate the model to finally simulate and study two Climate Change scenarios based on scenario A1B predictions. It was observed that large areas currently considered not prone to floods will become low flood risk (0.1-1 m water depth). Furthermore, larger sections of the floodplains upstream of the Lilo- an’s Bridge will become moderate flood risk areas (1 - 2 m water depth). The flood hazard maps created for the development of the present project will be presented to the LGU and the model will be used to create a larger set of possible flood prone areas related to rainfall intensity by GTZ’s Local Disaster Risk Management Department and to study possible improvements to the current early warning system and monitoring of the basin section belonging to Ormoc City; recommendations about further enhancement of the geo-hydro-meteorological data to improve the model’s accuracy mainly on areas of interest will also be presented at the LGU.