The potential of Nakivubo swamp (papyrus wetland) in maintaining water quality of inner Murchison bay - Lake Victoria

Nakivubo swamp (papyrus wetland) is located in the south east of the city of Kampala, Uganda. This swamp has been receiving waste water from Nakivubo channel for more than two decades. This investigation was aimed at monitoring the level of pollutants (nutrients and faecal coliforms) as the waste water filtrates through the swamp and the flow patterns of waste water through the swamp. From this preliminary investigation it was found out that the waste water is not evenly distributed over the swamp. Also high levels of pollutants seem to filtrate through the swamp and enter Inner Murchison Bay - Lake Victoria. Further research is under way to investigate in more detail the capacity of Nakivubo swamp to remove nutrients/pollutants from waste water flowing through it and the dominant mechanisms/processes involved.

Current composition, distribution and relative abundance of the fish stocks of Lake Victoria, Uganda

An experimental bottom trawl survey was carried out in the Uganda sector of Lake Victoria during the period May 1993 through May 1995 with the aim of establishing the current composition, distribution and abundance of the fish stocks. A total of 205 successful one-hour hauls were taken using the 25.4mm mesh size codend trawl net during the 19 cruises. Fourteen fish taxa (excluding the haplochromines) were recorded with Lates niloticus constituting the bulk (97 %) of the fish retained. Haplochromines and L. nilolicus were encountered in all areas sampled while Nile tilapia (Oreochromis niloticus) and other tilapiines were restricted to waters less than 20 metres deep. An average catch of 154 kg/hr was obtained in waters less than 30 metres deep. Species diversity and relative abundance varied with depth. Only two of the fifteen fish taxa (haplochromines and L.niloticus) were recorded in waters deeper than 30 metres and the bulk of the fish by weight (92 %) was obtained in waters less than 30 metres.

Growth rates of juvenile Nile perch, Lates niloticus L. in lakes Victoria, Kyoga and Nabugabo

The growth rates of Nile perch, Lates niloticus L. of 20 cm to 40 cm total length were estimated in lakes Victoria and Kyoga in 1991 and 1992 and Nabugabo in 1992 and 1993 by tagging. Fish grew faster in Lake Kyoga (mean growth rate 28.7 ± 1.3 cm S.E. per year, N = 49) than in Lake Victoria (18.9 ± 1.4 cm per year, N = 20) and Lake Nabugabo (19.0 ± 0.7 cm per year, N = 43). There were significant differences in growth rates between the lakes (F2 109 = 24.037, P < 0.001). Growth rates in Lake Kyoga were significantly higher than those of lak'es Victoria and Nabugabo (p < 0.001) but those of lakes Victoria and Nabugabo were not significantly different from each other (p = > 0.05). The faster growth rates in Lake Kyoga were attributed to improvement in food supply due to increases in stocks of haplochromine prey. Growth rates in Lake Kyoga were significantly higher, but those of lakes Victoria and Nabugabo were within the ranges of those reported in several native habitats of Nile perch.

The role of macrophytes in the economy of the lower Sondu-Miriu river of Lake Victoria

This paper highlights the results of a 12 month's ecological study of macrophytes and their role in the economy of the lower Sondu-Miriu river of Lake Victoria. A total of 34 species of aquatic macrophytes were identified. These were grouped as emergent, floating leaved, free floating and submersed. The major community type identified were dominated by Cladium jamaicanse (Crantz) Kurk., Cyperus paprus (L.) and Cyperus latifolius (Poir). The study observed an over dependence on macrophytes by the local community for the supply of bedding, grazing fields, fuel, roofing and other building materials. The white (heart) of Typha shoot, Nile cabbage (Pistia stratiotes and a legume solanum nigrum traditionally known as "osuga" are used as vegetables by local community. The only source of protein in this arid region is the fish caught in the swamps and birds which inhabit the swamp. The swamp provides the only source of green pasture in the dry season for the animals. An export oriented economy has developed involving mat making and basket weaving with exports reaching as far as Japan. The study proposes a rational and sustainable exploitation of the littoral zone to support the adjacent rural community.

The role of man on the changing fishery potentials of Lakes Victoria and Kyoga

The traditional lucrative fisheries of Lakes Victoria and Kyoga were based on similar multispecies itchthyofaunas. Man's activities on and around these lakes have both directly and indirectly assisted to modify the natural trends and components of the commercial fisheries. The exotic L.niloticus and O.niloticus together with the native R. argentea form the major component of current commercial landings. The total catches are higher but it is not yet clear whether the increase would endure given the fragility of predator/prey systems. The trophodynamics are still modifying and it is not certain how ecosystem function would be influenced. It is, therefore, prudent and desirable to undertake appropriate research investigations in order to guide the multiobjective activities of man on these lakes.

Catch assessment surveys in Lake Victoria

The purpose of this report is to describe very briefly the new program of catch assessment surveys in Lake Victoria. The CAS program, less than a year old is a joint venture of EAFFRO and the Fisheries Departments of the partner states, with assistance from FAO Statistician. The program arose out of the need to establish uniform statistically sound system of data collection in Victoria fisheries, has a topic of discussion at past meetings of the Fisheries Technical Committee.

Study of iron saturation in Brushless Doubly-Fed induction machines

This paper presents an analytical modelling approach for the Brushless Doubly-Fed Machine (BDFM) taking iron saturation into account. A generalised coupled-circuit model is developed which considers stator and rotor teeth saturation effects. A method of calculating the machine inductance parameters is presented which can be implemented in time-stepping simulations. The model has been implemented in MATLAB/Simulink and verified by Finite Element analysis and experimental tests. The tests are carried out on a 180 frame size BDFM. Flux search coils have been utilised to measure airgap and teeth flux densities. © 2010 IEEE.

Characterising rotors for brushless doubly-fed machines (BDFM)

The brushless doubly fed machine (BDFM) is a robust alternative to the doubly fed induction generator (DFIG) which is widely used in wind turbines but suffers from failures associated with its brushes and sliprings. The rotor plays an important part in a BDFM, coupling the two stator fields. To date, the nested loop has been almost exclusively used in modern BDFMs, but this approach is not ideally suited to large machines in which a form wound rotor is likely to be preferable from a manufacturing point of view. This paper gives a comparative study of two rotor windings. The performance of the rotors has been predicted from theory for a frame size 160 BDFM. Actual rotors have been built, using identical rotor laminations, and tested, giving results which accord well with predictions. The results give insight into the design issues of rotors both from electrical and manufacturing viewpoints. ©2010 IEEE.

Ready configuration of machines into an existing manufacturing system

This paper focuses on simplifying and easing the integration of a new machine into an existing conventional hierarchical manufacturing system. Based on a distributed manufacturing paradigm, it proposes the functions and interfaces that a new machine and an existing manufacturing system should possess so that ready and simple configuration of additional machines can be achieved. The configuration process is intended to include, not only mechanical and electrical interfaces, but also decision system interfaces (such as planning, scheduling, and shop-floor control). Preliminary laboratory experiments to compare the reconfigurability resulting from a conventional integration method and the proposed distributed method are presented and discussed. © 2007 ISAM.

Extending noise robust structured support vector machines to larger vocabulary tasks

This paper describes a structured SVM framework suitable for noise-robust medium/large vocabulary speech recognition. Several theoretical and practical extensions to previous work on small vocabulary tasks are detailed. The joint feature space based on word models is extended to allow context-dependent triphone models to be used. By interpreting the structured SVM as a large margin log-linear model, illustrates that there is an implicit assumption that the prior of the discriminative parameter is a zero mean Gaussian. However, depending on the definition of likelihood feature space, a non-zero prior may be more appropriate. A general Gaussian prior is incorporated into the large margin training criterion in a form that allows the cutting plan algorithm to be directly applied. To further speed up the training process, 1-slack algorithm, caching competing hypothesis and parallelization strategies are also proposed. The performance of structured SVMs is evaluated on noise corrupted medium vocabulary speech recognition task: AURORA 4. © 2011 IEEE.

The experiment to evaluate the AC loss of 2G HTS windings in the application of rotating electric machines

This paper presents the design of an AC loss experiment using nitrogen boil-off method. This experiment is aimed at exploring the AC loss of HTS double race-track coils which will be installed on the rotor of a wind turbine generator. The operating environment is simulated by designing a cryostat with rotating magnetic field windings. Apart from the fact that the alternating magnetic field causes most of AC loss on the HTS coils, we also believe that the DC background field would be another important factor causing AC loss if the HTS coil is experiencing by both alternating magnetic field in the perpendicular direction and DC background field in the parallel direction. In order to perform the boil-off measurement, we present the method to estimate the heat leakage in the cryostat which might cause errors to the measurement. © 2011 IEEE.

Design of brushless doubly-fed machines based: On magnetic circuit modeling

This paper proposes a magnetic circuit model (MCM) for the design of a brushless doubly-fed machine (BDFM). The BDFM possesses advantages in terms of high reliability and reduced gearbox stages, and it requires a fractionally-rated power converter. This makes it suitable for utilization in offshore wind turbines. It is difficult for conventional design methods to calculate the flux in the stator because the two sets of stator windings, which have different pole number, form a complex flux pattern which is not easily determined using common analytical approaches. However, it is advantageous to predict the flux density in the teeth and air-gap at the initial design stage for sizing purposes without recourse finite element analysis. Therefore a magnetic circuit model is developed in this paper to calculate the flux density. A BDFM is used as a case study with FEA validation. © 1965-2012 IEEE.

Generalized vector control for brushless doubly fed machines with nested-loop rotor

This paper presents a generalized vector control system for a generic brushless doubly fed (induction) machine (BDFM) with nested-loop type rotor. The generic BDFM consists of p1/p2 pole-pair stator windings and a nested-loop rotor with N number of loops per nest. The vector control system is derived based on the basic BDFM equation in the synchronous mode accompanied with an appropriate synchronization approach to the grid. An analysis is performed for the vector control system using the generic BDFM vector model. The analysis proves the efficacy of the proposed approach in BDFM electromagnetic torque and rotor flux control. In fact, in the proposed vector control system, the BDFM torque can be controlled very effectively promising a high-performance BDFM shaft speed control system. A closed-loop shaft speed control system is composed based on the presented vector control system whose performance is examined both in simulations and experiments. The results confirm the high performance of the proposed approach in BDFM shaft speed control as well as a very close agreement between the simulations and experiments. Tests are performed on a 180-frame prototype BDFM. © 2012 IEEE.

Enhanced light emission in active silicon-on-insulator photonic crystal slabs and slot waveguides

We present experimental measurements on Silicon-on-insulator (SOI) photonic crystal slabs with an active layer containing Er3+ ions-doped Silicon nanoclusters (Si-nc), showing strong enhancement of 1.54 μm emission at room temperature. We provide a systematic theoretical analysis to interpret such results. In order to get further insight, we discuss experimental data on the guided luminescence of unpatterned SOI planar slot waveguides, which show enhanced light emission in transverse-magnetic (TM) modes over transverse-electric (TE) ones. ©2007 IEEE.