Correlation between photoluminescence and structural defects in Ca 1+x Cu 3 - X Ti 4 O 12 systems

Ca1+xCu3-xTi4O12 powders were synthesized by a conventional solid-state reaction. X-ray diffraction (XRD) was performed to verify the formation of cubic CaCu3Ti4O 12 (CCTO) and orthorhombic CaTiO3 (CTO) phases at long range. Rietveld refinements indicate that excess Ca atoms added to the Ca 1-xCu3-xTi4O12 (x = 1.0) composition segregated in a CaTiO3 secondary phase suggesting that solubility limit of Ca atoms in the CaCu3Ti4O12 lattice was reached for this system. The FE-SEM images show that the Ca 1+xCu3-xTi4O12 (0 < x < 3) powders are composed of several agglomerated particles with irregular morphology. X-ray absorption near-edge structure spectroscopy (XANES) spectra indicated [TiO5Vo z]-[TiO6] complex clusters in the CaCu3Ti4O12 structure which can be associated with oxygen vacancies (Vo z = V o x, Vo •, and Vo ••) whereas in the CaTiO3 powder, this analysis indicated [TiO6]-[TiO6] complex clusters in the structure. Ultraviolet-visible (UV-vis) spectra and photoluminescence (PL) measurements for the analyzed systems revealed structural defects such as oxygen vacancies, distortions, and/or strains in CaCu3Ti4O12 and CaTiO3 lattices, respectively. © 2012 The American Ceramic Society.

Análise integrada aplicada ao mapeamento geológico-geotécnico na escala de 1:20.000 da estrada de Castelhanos, Ilhabela - SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização geológica, hidrogeológica e o mapeamento da vulnerabilidade natural à poluição dos aqüíferos, na escala 1:25.000, das áreas urbana e de expansão do município de Araraquara-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparison of the Anesthetic Efficacy between Bupivacaine and Lidocaine in Patients with Irreversible Pulpitis of Mandibular Molar

Introduction: The purpose of this study was to compare the anesthetic efficacy of 0.5% bupivacaine with 1:200,000 epinephrine with that of 2% lidocaine with 1:100,000 epinephrine during pulpectomy in patients with irreversible pulpitis in mandibular posterior teeth. Methods: Seventy volunteers, patients with irreversible pulpitis admitted to the Emergency Center of the School of Dentistry at the University of Sao Paulo, randomly received a conventional inferior alveolar nerve block containing 3.6 mL of either 0.5% bupivacaine with 1:200,000 epinephrine or 2% lidocaine with 1:100,000 epinephrine. During the subsequent pulpectomy, we recorded the patients subjective assessments of lip anesthesia, the absence/presence of pulpal anesthesia through electric pulp stimulation, and the absence/presence of pain through a verbal analog scale. Results: All patients reported lip anesthesia after the application of either inferior alveolar nerve block. By measuring pulpal anesthesia success with the pulp tester, lidocaine had a higher success rate (42.9%) than bupivacaine (20%). For patients reporting none or mild pain during pulpectomy, the success rate of bupivacaine was 80% and lidocaine was 62.9%. There were only statistically significant differences to the success of pulpal anesthesia. Conclusions: Neither of the solutions resulted in an effective pain control during irreversible pulpitis treatments of mandibular molars. (J Endod 2012;38:594-597)

Do transsexuals have micturition disorders?

OBJECTIVE: Transsexualism occurs with an estimated prevalence of 2.4:100,000 male-to-female (MTF) and 1:100,000 female-to-male (FTM) transsexuals. As sex reassignment surgery involves surgery of the urethra and transsexuals are substituted life-long with the cross gender hormones there could possibly arise micturition disorders. Aim of the study was to determine if transsexuals have an increased risk of micturition disorders and if so which. STUDY DESIGN: Between January and July 2003 we examined 25 transsexuals whereof 18 were MTF and 7 were FTM transsexuals using King's Health Questionnaire, visual analogue scale for patient's well being, perineal and transabdominal ultrasound, urine dipstick and uroflow measurement. RESULTS: 17 out of 25 patients considered themselves very happy. In MTF transsexuals, a diverted stream, overactive bladder and stress urinary incontinence was a common problem. Prostate volume was small with 20 g and palpation did not confirm and solid or suspicious lesions. None of the patients had significant residual urine but MTF transsexuals had a reduced urinary flow. We could not detect a current urinary tract infections in any of the patients. CONCLUSION: Transsexuals have an increased risk for the development of micturition disorders including stress urinary incontinence and overactive bladder compared to age-matched control groups and should be counselled preoperatively. Reasons for the development of incontinence might be surgery including pudendal nerve damage, hormonal reasons and ageing.

Propagation of Cross-Section Uncertainties in Criticality Calculations in the Framework of UAM-Phase I Using MCNPX-2.7e and SCALE-6.1

In the framework of the OECD/NEA project on Benchmark for Uncertainty Analysis in Modeling (UAM) for Design, Operation, and Safety Analysis of LWRs, several approaches and codes are being used to deal with the exercises proposed in Phase I, “Specifications and Support Data for Neutronics Cases.” At UPM, our research group treats these exercises with sensitivity calculations and the “sandwich formula” to propagate cross-section uncertainties. Two different codes are employed to calculate the sensitivity coefficients of to cross sections in criticality calculations: MCNPX-2.7e and SCALE-6.1. The former uses the Differential Operator Technique and the latter uses the Adjoint-Weighted Technique. In this paper, the main results for exercise I-2 “Lattice Physics” are presented for the criticality calculations of PWR. These criticality calculations are done for a TMI fuel assembly at four different states: HZP-Unrodded, HZP-Rodded, HFP-Unrodded, and HFP-Rodded. The results of the two different codes above are presented and compared. The comparison proves a good agreement between SCALE-6.1 and MCNPX-2.7e in uncertainty that comes from the sensitivity coefficients calculated by both codes. Differences are found when the sensitivity profiles are analysed, but they do not lead to differences in the uncertainty.

Producción BCN200 : desarrollo del proceso de obtención de la base cartográfica nacional a escala 1:200.000 : detección, edición y resolución de conflictos cartográficos en la representación a escala.

Los objetivos propios del proyecto propuesto se centran en describir las fases necesarias del proceso de producción de la Base Cartográfica Nacional a escala 1:200.000, cuyo producto final es plasmado en un mapa cartográfico concreto; Mapa Provincial con la misma escala. Todas las tareas esenciales para su elaboración se realizan de acuerdo a la finalidad principal que persigue la creación de un mapa, que es la representación clara y concisa de los elementos geográficos que definen una extensión de territorio. Se pone de manifiesto las normas y reglas específicas que son necesarias para dicha producción, atendiendo las condiciones que presenta el modelo de la base de datos concreta, compuesto por la información válida con carácter oficial, ya que debe estar registrada por las instituciones del Estado, de forma que el conjunto de información sea la más adecuada a la realidad objetiva. Se siguen aquellas pautas referentes a la captura de los datos que componen dicho modelo, teniendo en cuenta la escala cartográfica a la que se representan y ciertas condiciones geométricas. Así como aquellas normas que guían los procesos de controles de calidad y generalización de la información geográfica. También, se establecen de forma fija la serie de estilos de representación de las geometrías componen el mapa, y la simbología utilizada para identificar las entidades definidas mediante elementos puntuales. Las reglas principales descritas son las concernientes a la edición de los conflictos cartográficos producidos a la hora de representar los datos reales. La BCN200 se crea con la finalidad principal de recopilar toda la información cartográfica que define el aspecto y el conjunto de detalles, tanto geográficos y naturales, como aquellos aportados por las construcciones realizadas por el ser humano, de la superficie terrestre que abarca el territorio nacional, con la finalidad de facilitar el desarrollo de tareas semiautomáticas para obtener una producción de diversas elaboraciones cartográficas, digitales o impresas.

DIVINDADES MLK E CULTO A MOLEK NOS QUADROS DA CRISE RELIGIOSA NO FINAL DA MONARQUIA DE JUDÁ (2 Reis 16,3; 17,17.31; 21,6; 23,10; KTU 1.100; 1.118; 1.161)

A dissertação é dirigida a um especial e não resolvido problema na descrição do desenvolvimento religioso de Israel. Em textos do Antigo Testamento acerca do sacrifício de humanos, há uma unidades literárias autônomas relacionadas ao culto a mOlek. Porém, alguns pesquisadores sustentam que o culto a mOlek não tem esta característica. A dissertação aspira a investigar este argumento, concentrando-se em fontes históricas (2Reis 16,3; 17,17.31; 21,6; 23,10). Discutindo fontes ugaríticas duas listas de divindades e um texto funerário nós perguntares acerca das características das divindades mLlK nas culturas cananéias. Em síntese, mOlek é uma divindade ctônica mas não é destinatária de sacrifícios humanos.(AU)

DIVINDADES MLK E CULTO A MOLEK NOS QUADROS DA CRISE RELIGIOSA NO FINAL DA MONARQUIA DE JUDÁ (2 Reis 16,3; 17,17.31; 21,6; 23,10; KTU 1.100; 1.118; 1.161)

A dissertação é dirigida a um especial e não resolvido problema na descrição do desenvolvimento religioso de Israel. Em textos do Antigo Testamento acerca do sacrifício de humanos, há uma unidades literárias autônomas relacionadas ao culto a mOlek. Porém, alguns pesquisadores sustentam que o culto a mOlek não tem esta característica. A dissertação aspira a investigar este argumento, concentrando-se em fontes históricas (2Reis 16,3; 17,17.31; 21,6; 23,10). Discutindo fontes ugaríticas duas listas de divindades e um texto funerário nós perguntares acerca das características das divindades mLlK nas culturas cananéias. Em síntese, mOlek é uma divindade ctônica mas não é destinatária de sacrifícios humanos.(AU)