Improved modeling of photoluminescent and electroluminescent coupling in multijunction solar cells

The performance of tandem stacks of Group III?V multijunction solar cells continues to improve rapidly, both through improved performance of the individual cells in the stack and throughi ncrease in the number of stacked cells. As the radiative efficiency of these individual cells increases, radiative coupling between the stacked cells becomes an increasingly important factor not only in cell design, but also in accurate efficiency measurement and in determining performance of cells and systems under varying spectral conditions in the field. Past modeling has concentrated on electroluminescent coupling between the cells, although photoluminescent coupling is shown to be important for cells operating near their maximum power point voltage or below or when junction defect recombination is significant. Extension of earlier models i sproposed to allow this non-negligible component of luminescent coupling to be included. Therefined model is validated by measurement of the closely related external emission from both single and double junction cells.

The segmental approximation in multijunction solar cells

The segmental approach has been considered to analyze dark and light I-V curves. The photovoltaic (PV) dependence of the open-circuit voltage (Voc), the maximum power point voltage (Vm), the efficiency (?) on the photogenerated current (Jg), or on the sunlight concentration ratio (X), are analyzed, as well as other photovoltaic characteristics of multijunction solar cells. The characteristics being analyzed are split into monoexponential (linear in the semilogarithmic scale) portions, each of which is characterized by a definite value of the ideality factor A and preexponential current J0. The monoexponentiality ensures advantages, since at many steps of the analysis, one can use the analytical dependences instead of numerical methods. In this work, an experimental procedure for obtaining the necessary parameters has been proposed, and an analysis of GaInP/GaInAs/Ge triple-junction solar cell characteristics has been carried out. It has been shown that up to the sunlight concentration ratios, at which the efficiency maximum is achieved, the results of calculation of dark and light I-V curves by the segmental method fit well with the experimental data. An important consequence of this work is the feasibility of acquiring the resistanceless dark and light I-V curves, which can be used for obtaining the I-V curves characterizing the losses in the transport part of a solar cell.

Quantum Dot-Sensitized Solar Cells Based on Directly Adsorbed Zinc Copper Indium Sulfide Colloids

Heavy metal-based quantum dots (QDs) have demonstrated to behave as efficient sensitizers in QD-sensitized solar cells (QDSSCs), as attested by the countless works and encouraging efficiencies reported so far. However, their intrinsic toxicity has arisen as a major issue for the prospects of commercialization. Here, we examine the potential of environmentally friendly zinc copper indium sulfide (ZCIS) QDs for the fabrication of liquid-junction QDSSCs by means of photoelectrochemical measurements. A straightforward approach to directly adsorb ZCIS QDs on TiO2 from a colloidal dispersion is presented. Incident photon-to-current efficiency (IPCE) spectra of sensitized photoanodes show a marked dependence on the adsorption time, with longer times leading to poorer performances. Cyclic voltammograms point to a blockage of the channels of the mesoporous TiO2 film by the agglomeration of QDs as the main reason for the decrease in efficiency. Photoanodes were also submitted to the ZnS treatment. Its effects on electron recombination with the electrolyte are analyzed through electrochemical impedance spectroscopy and photopotential measurements. The corresponding results bring out the role of the ZnS coating as a barrier layer preventing electron leakage toward the electrolyte, as argued in other QD-sensitized systems. The beneficial effect of the ZnS coating is ultimately reflected on the power conversion efficiency of complete devices, reaching values of 2 %. In a more general vein, through these findings, we aim to call the attention to the potentiality of this quaternary alloy, virtually unexplored as a light harvester for sensitized devices.

Investigation of Performance Enhancements for a Liquid-Desiccant Solar Air-Conditioner

Thermally driven liquid-desiccant air-conditioners (LDAC) are a proven but still developing technology. LDACs can use a solar thermal system to reduce the operational cost and environmental impact of the system by reducing the amount of fuel (e.g. natural gas, propane, etc.) used to drive the system. LDACs also have a key benefit of being able to store energy in the form of concentrated desiccant storage. TRNSYS simulations were used to evaluate several different methods of improving the thermal and electrical coefficients of performance (COPt and COPe) and the solar fraction (SF) of a LDAC. The study analyzed a typical June to August cooling season in Toronto, Ontario. Utilizing properly sized, high-efficiency pumps increased the COPe to 3.67, an improvement of 55%. A new design, featuring a heat recovery ventilator on the scavenging-airstream and an energy recovery ventilator on the process-airstream, increased the COPt to 0.58, an improvement of 32%. This also improved the SF slightly to 54%, an increase of 8%. A new TRNSYS TYPE was created to model a stratified desiccant storage tank. Different volumes of desiccant were tested with a range of solar array system sizes. The largest storage tank coupled with the largest solar thermal array showed improvements of 64% in SF, increasing the value to 82%. The COPe was also improved by 17% and the COPt by 9%. When combining the heat recovery systems and the desiccant storage systems, the simulation results showed a 78% increase in COPe and 30% increase in COPt. A 77% improvement in SF and a 17% increase in total cooling rate were also predicted by the simulation. The total thermal energy consumed was 10% lower and the electrical consumption was 34% lower. The amount of non-renewable energy needed from the natural gas boiler was 77% lower. Comparisons were also made between LDACs and vapour-compression (VC) systems. Dependent on set-up, LDACs provided higher latent cooling rates and reduced electrical power consumption. Negatively, a thermal input was required for the LDAC systems but not for the VC systems.

Saving the Monopsony: Exclusivity, Innovation and Market Power in the Media Sector. Research Papers in Law, 7/2006

From the Introduction. The Media Sector has experienced a technological revolution in the last 15 years. Digital encoding of television signals made possible a more efficient use of the radiospectrum. Digital terrestrial television (hereinafter, “DTT”) allows now for the reception of a significant number of free-to-air channels.1 Moreover, the use of new transmission platforms (hereinafter,“platforms”), namely cable and direct-to-home satellite (hereinafter, “DTH”) paved the way for the arrival in Europe of pay-TV operators, which finance their activities mainly via subscription fees. This changing technological landscape is subject to further evolution in the near future, as incumbent telecommunications operators become increasingly interested in making available broadcasting content2 as part of their broadband offer and 3G mobile handsets can be used for the reception of TV signals....The present paper seeks to ascertain whether the Commission “regulatory approach” towards the exclusive sale of premium content is a sound one, in particular in view of the constant technological evolution outlined above. The assumptions underlying landmark Commission decisions will be compared with recent developments of the media sector in Italy. In the NewsCorp./Telepiù case, decided in 2003, the Commission imposed very strict conditions to allow the merger giving birth to Sky Italia, on the assumption that the operation created a lasting near-monopsony in the different upstream markets for the acquisition of premium intervened against the media conglomerate Mediaset (which controls, inter alia, the main three private free-to-air channels in Italy) for an alleged abuse of dominant position.17 In fact, and contrary to the forecasts made by the Commission, Mediaset was in a position to acquire the broadcasting rights of the main Italian football teams, thereby excluding the incumbent (and near-monopolist) pay-TV operator, Sky Italia. This may go to show that the reality of the sector is more complex and evolves faster than one may infer from the Commission practice, thus putting into question its stance regarding exclusivity. The experience of the evolution of the Italian media sector will be used as the starting point for the evaluation of alternative regulatory options.

Productive parameters of seawater and epipelagic plankton and mesozooplankton biomass at stations of R/V Akademik Mstislav Keldysh during 1994-1998

Calculated and measured estimations of biomass of small (<3 mm), large (3-30 mm), and total zooplankton were verified (compared). These integral parameters of epipelagic communities were estimated by two methods. We used previously obtained regression equations, which correlate these parameters with water transparency. Measured values of aforesaid parameters were compared with their mean values in waters of different productivity estimated from NASA satellite maps. We compared data collected at fifteen stations in September-December in regions of different productivity in the North Atlantic. In warm regions (to the south of 40°N) measured and calculated values coincide well. In boreal regions in autumn bulk of mesozooplankton descends to deep layers due to seasonal migrations; hence correlation between measured and calculated values is disrupted. It is evident that correlation between water transparency and mesozooplankton biomass (integral index of water productivity) obtained before should be corrected for seasonal variations.

(Table 2) Ice, snow and freeboard statistics from measurement transects at 11 ice stations during Aurora Australis cruise SIPEX in 2007

The Sea Ice Physics and Ecosystem experiment (SIPEX) was conducted in the East Antarctic pack ice zone between 115-130°E from 9 September - 11 October, 2007. In situ measurements of sea-ice and snow properties were conducted at 15 ice stations, together with ship-based ASPeCt observations. The ice and snow thickness varied considerably in different regions of the pack ice, with particularly thick ice associated with deformation and a strong slope jet in the southwest of the study region. The mean ice thickness was 0.99 m (1.57 m excluding the northern marginal ice zones), but varied from 0.61 m along the southern leg to 1.80 m along the western leg, with pockets of considerably thicker ice in some regions. Swell was observed on two occasions penetrating more than 330 km south of the ice edge into regions with 80-100% ice concentration. Ice thicknesses calculated from near coincident ICESat laser altimetry (1.74 m) are similar to the in-situ observations in the central pack (1.57 m).

Primary productivity and mass fluxes for four stations in teh equatorial Pacific (Table 1)

Primary productivity (14C) and mass flux measurements using a free-drifting sediment trap deployed at 900 m were made at four stations in the Pacific Ocean between 12°N and 6°S at 153°W. The latitudinal variations in productivity were consistent with historical patterns showing the equator as a zone of high production and the oligotrophic waters north of the equatorial region as an area of low productivity. The correlation coefficient between the two sets of independent measurements was 0.999, indicating that in this oceanic area the activity of the primary producers was closely related to the total mass flux. A re-examination of historical data suggests that the downward flux of particulate organic carbon varies in direct proportion to the quotient of surface primary production raised to the 1.4 power and depth raised to the 0.63 power.

Standby power for railroad-highway grade crossing warning systems. Final report.

Federal Railroad Administration, Office of Rail Safety Research, Washington, D.C.

The space station power system.

Shipping list no.: 88-291-P.

Earth-atmosphere radiation budget analyses derived from NOAA satellite data, June 1974-February 1978 /

Mode of access: Internet.

A method for heat rejection from space power plants,

Mode of access: Internet.

Illinois solar weather program /

"March 1983."

Aerogravity-assist maneuvering of a tethered satellite system

Two new implementations of a tethered satellite system to provide aeroassist during a planetary flyby are investigated. In each mission scenario the interaction of the Martian atmosphere with an aerodynamic lifting surface, which is tethered to an orbiter, is used to perturb the flight path of the system. The aerodynamic forces generated by interacting with the atmosphere augment the gravity assist provided by the planet. In the first aerogravity-assist maneuver the tethered satellite system has congruent post- and preflyby configurations. The second scenario, which is referred to as a dual-destination mission, involves the system mass being separated during the flyby. Both of these aerogravity-assist maneuvers are shown to facilitate significant, propellant-free velocity changes.

Lead sulfide nanocrystal: conducting polymer solar cells

In this paper, we report photovoltaic devices fabricated from lead sulfide nanocrystals and the conducting polymer poly(2-methoxy-5-(2'-ethyl-hexyloxy)-p-phenylene vinylene). This composite material was produced via a new single-pot synthesis which solves many of the issues associated with existing methods. Our devices have white light power conversion efficiencies under AM 1.5 illumination of 0.7% and single wavelength conversion efficiencies of 1.1%. Additionally, they exhibit remarkably good ideality factors (n = 1.15). Our measurements show that these composites have significant potential as soft optoelectronic materials.