Tunis's topographical and pictorial guide to Niagara : containing, also, a description of the route through Canada, and the great northern route, from Niagara Falls to Montreal, Boston, and Saratoga Springs. Also, full and accurate tables of distances on all railroads running to and from Niagara Falls. --

Cover title: Tunis's guide to Niagara and traveller's companion, illustrated.

Bone speed of sound in overweight and normal-weight girls and adolescents

Over the last two decades, the prevalence of obesity in the general population has been steadily increasing. Obesity is a major issue in scientific research because it is associated with many health problems, one of which is bone quality. In adult females, adiposity is associated with increased bone mineral density, suggesting that there is a protective effect of fat on bone. However, the association between adiposity and bone strength during childhood is not clear. Thus, the purpose of this study was to compare bone strength, as reflected by speed of sound (SOS), of overweight and obese girls and adolescents with normal-weight age-matched controls. Data from 75 females included normal-weight girls (G-NW; body fat:::; 25%; n = 21), overweight and obese girls (GOW; body fat ~ 28%; n = 19), normal-weight adolescents (A-NW, body fat:::; 25%; n = 13) and overweight and obese adolescents (A-OW; body fat ~ 28%; n = 22). Nutrition was assessed with a 24-hour recall questionnaire and habitual physical activity was measured for one week using accelerometry. Using quantitative ultrasound (QUS; Sunlight Omnisense™), bone SOS was measured at the distal radius and mid-tibia. No differences were found between groups in daily total energy, calcium or vitamin D intake. However, all groups were below the recommended daily calcium intake of 1300 mg (Osteoporosis Canada, 2008). Adolescents were significantly less active than girls (14.7 ± 0.6 vs. 6.3 ± 0.6% active for G and A, respectively). OW accumulated significantly less minutes of moderate-to-very vigorous physical activity per day (MVPA) than NW in both age groups (114 ± 6 vs. 57 ± 5 min/day for NW and OW, i respectively). Girls had significantly lower radial SOS (3794 ± 87 vs. 3964 ± 64 mls for G-NW and A-NW, respectively), and tibial SOS (3678 ± 86 vs. 3878 ± 52 mls for G-NW and A-NW, respectively) than adolescents. Radial SOS was similar in the two adiposity groups within each age group. However, tibial SOS was lower in the two overweight groups (3601 ± 75 mls vs. 3739 ± 134 mls for G-OW and A-OW, respectively) compared with the age-matched normal-weight controls. Body fat percentage negatively correlated with tibial SOS in the study sample as a whole (r = -0.30). However, when split into groups, percent bo~y fat correlated with tibial SOS only in the A-OW group (r = -0.53). MVPA correlated with tibial SOS (r = 0.40), once age was partialed out. In conclusion, in contrast withthe higher bone strength characteristic of obese adult women, overweight and obese girls and adolescents are characterized by low tibial bone strength, as assessed with QUS. The differences between adiposity groups in tibial SOS may be at least partially due to the reduced weight-bearing physical activity levels in the overweight girls and adolescents. However, other factors, such as hormonal influences associated with high body fat may also playa role in reducing bone strength in overweight girls. Further research is required to reveal the mechanisms causing low bone strength in overweight and obese children and adolescents.

THE INFLUENCE OF LENGTH CHANGE SPEED AND DIRECTION ON DYNAMIC FUNCTION POTENTIATION IN FAST MOUSE MUSCLE

The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (25º C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5, 3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19 ± 1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.

THE INFLUENCE OF LENGTH CHANGE SPEED AND DIRECTION ON DYNAMIC FUNCTION POTENTIATION IN FAST MOUSE MUSCLE

The purpose of this study was to test the hypothesis that the potentiation of dynamic function was dependent upon both length change speed and direction. Mouse EDL was cycled in vitro (250 C) about optimal length (Lo) with constant peak strain (± 2.5% Lo) at 1.5,3.3 and 6.9 Hz before and after a conditioning stimulus. A single pulse was applied during shortening or lengthening and peak dynamic (concentric or eccentric) forces were assessed at Lo. Stimulation increased peak concentric force at all frequencies (range: 19±1 to 30 ± 2%) but this increase was proportional to shortening speed, as were the related changes to concentric work/power (range: -15 ± 1 to 39 ± 1 %). In contrast, stimulation did not increase eccentric force, work or power at any frequency. Thus, results reveal a unique hysteresis like effect for the potentiation of dynamic output wherein concentric and eccentric forces increase and decrease, respectively, with work cycle frequency.

Towards a better understanding of the relationship between speed of internationalization and performance outcomes among young international ventures

This thesis offers an explanation for the inconsistent relationship between speed of internationalization and performance outcomes in the context of young international ventures. We argue that the variables of scope of internationalization, entrepreneurial orientation and degree of internationalization play a moderating role in the relationship between speed of internationalization and performance outcomes of international new ventures (INVs). Using primary survey data from INVs in China, we found empirical support for significant moderating impact of scope of internationalization, entrepreneurial orientation variables and no support for the moderating impact of degree of internationalization variable. The results suggest that business managers of INVs shall consider the applied moderating variables as an effective tool kit to enhance firm performance in foreign markets and to mitigate any potential risks of early internationalization.

The Influence of Attentional Focus on the Self-Efficacy-Performance Relationship in a Continuous Running Task

The self-efficacy-performance relationship in continuous sport tasks has been shown to be significantly reciprocal yet unequal with stronger influences in the performance-to-self-efficacy pathway rather than self-efficacy-to-performance pathway (e.g., LaForge-MacKenzie & Sullivan, 2014b). Bandura (2012) suggested that sociocognitive variables may influence this relationship. Attention as a sociocognitve factor may bias the processing of performance and self-efficacy information (Bandura, 1982, 1997; Bandura & Jourden, 1991). As confidence and attention are important aspects of peak running performance (Brewer, Van Raalte, Linder, & VanRaalte, 1991), the primary purpose of the present study was to examine the self-efficacy-performance relationship under three conditions of attentional focus. The secondary purpose was to examine self-efficacy and performance as separate constructs under the same conditions of attention. Participants ran continuously for one kilometer in one of three randomly assigned attentional focus conditions: internal-focus (n = 51), external-focus (n = 50), and control (n = 49). Self-efficacy was assessed using a one-item measure every 200 meters. Path analyses examining the primary objective revealed significant self-efficacy-to-performance pathways in all conditions: external-focus (p < .05, βs ranging from -.17 to -.32), internal-focus (p < .05, βs ranging from -.26 to -.36), and control (p < .05, βs ranging from -.29 to -.42). Significant reciprocal relationships were absent in all conditions. ANOVAs examining the secondary objectives found significantly faster performance in the control condition at the start (F (2, 147) = 3.86, p < .05) and end of the task (F (2, 147) = 3.56, p < .05). Self-efficacy was significantly higher in the internal-focus condition at the end of the task (Self-Efficacy 4 (F (2, 147) = 3.21, p < .05) and Self-Efficacy 5 (F (2, 147) = 4.74, p < .05). In contrast to previous within-trial research (e.g., LaForge-MacKenzie & Sullivan, 2014b) self-efficacy-to-performance effects were more significant and robust than performance-to-self-efficacy effects. These results provided support for Bandura’s (2012) suggestion that sociocognitive factors may have the ability to alter the causal structure of the self-efficacy-performance relationship, proposing complexities in the self-efficacy-performance relationship (Sitzmann &Yeo, 2013). Results were discussed from both theoretical and applied perspectives.

Slides - Rum Running

A selection of slides that appeared in the book "Rum Across the Border" by Allan Seymour Everest. The slides show Overton's Corners Border Station and the large volume of traffic that was inspected, a popular Canadian border spot, The Meridian Hotel and the U.S. Marshall destroying liquor in Rouses Point, N.Y.

The contribution of skate blade properties to skating speed

The purpose of the study was to investigate the relative contribution of skate blade properties to on-ice skating speed. Thirty-two male ice hockey players (mean age = 19±2.65 yrs.) representing the Ontario Minor Hockey Association (OMHA; Midget AAA and Junior), Canadian Inter University Sport (CIS: Varsity), Ontario hockey league (OHL) and East Coast Hockey League (ECHL), and the playing positions of forwards (n=18) and defense (n=14) were recruited to participate. Skate related equipment worn by the players for the purpose of the research was documented and revealed that 80% of the players wore Bauer skates, Tuuk blade holders and LS2 skate blades. Subjects completed a battery of eight on-ice skating drills used to measure and compare two aspects of skating speed; acceleration [T1(s)] and total time to complete each drill [TT(s)] while skating on three skate blade conditions. The drills represented skills used in the game of hockey, both in isolation (e.g., forward skating, backward skating, stops and starts, and cornering) and in sequence to simulate the combination of skills used in a shift of game play. The three blade conditions consisted of (i) baseline, represented by the blades worn by the player throughout their current season of play; (ii) experimental blades (EB), represented by brand name experimental blades with manufacturers radius of contour and a standardized radius of hollow; and (iii) customized experimental blades (CEB), represented by the same brand name experimental blades sharpened to the players’ preference as identified in the baseline condition. No significant differences were found in acceleration time [T1(s)] or total time to complete [TT(s)] the isolated drills across blade conditions; however significant differences were revealed in both T1(s) and TT(s) measured during the execution of the sequenced drill across blade conditions. A iii Bonferroni post hoc test revealed that players skated significantly faster when skating on the CEB condition compared to the baseline condition (p≤.05). A questionnaire assessing subjects perceived comfort, confidence and effort expended while skating on the experimental blades revealed that players were significantly more comfortable when skating on the CEB versus the EB condition (p≤.05). Outcomes of the study provide evidence to suggest that the experimental skate blades customized with the players preferred blade sharpening characteristics results in faster skating speed in a combination drill representing skills performed in gameplay.

Evaluación de dos diferentes técnicas de instrumentación Light Speed y Profile en conductos moderadamente curvos (Un estudio comparativo)

Tesis ( Maestría en Ciencias Odontológicas con Especialidad en Endodoncia) U.A.N.L.

The regulation of adult hippocampal neurogenesis by wheel running and environmental enrichment

Introduction: Chez les mammifères, la naissance de nouveaux neurones se poursuit à l’âge adulte dans deux régions du cerveau: 1) l’hippocampe et 2) la zone sous-ventriculaire du prosencéphale. La neurogenèse adulte n’est pas un processus stable et peut être affectée par divers facteurs tels que l’âge et la maladie. De plus, les modifications de la neurogenèse peuvent être à l’origine des maladies de sorte que la régulation ainsi que le rétablissement de la neurogenèse adulte doivent être considérés comme d’importants objectifs thérapeutiques. Chez la souris saine ou malade, la neurogenèse hippocampale peut être fortement régulée par l’enrichissement environnemental ainsi que par l’activité physique. Cependant, lors même que l’activité physique et l’enrichissement environnemental pourraient contribuer au traitement de certaines maladies, très peu d’études porte sur les mécanismes moléculaires et physiologiques responsables des changements qui sont en lien avec ces stimuli. Objectifs et hypothèses: Les principaux objectifs de cette étude sont de caractériser les effets de stimuli externes sur la neurogenèse et, par le fait même, d’élucider les mécanismes sous-jacents aux changements observés. En utilisant le modèle d’activité physique volontaire sur roue, cette étude teste les deux hypothèses suivantes: tout d’abord 1) qu’une période prolongée d’activité physique peut influencer la neurogenèse adulte dans le prosencéphale et l’hippocampe, et 2) que l’activité volontaire sur roue peut favoriser la neurogenèse à travers des stimuli dépendants ou indépendants de la course. Méthodes: Afin de valider la première hypothèse, nous avons utilisé un paradigme incluant une activité physique volontaire prolongée sur une durée de six semaines, ainsi que des analyses immunohistochimiques permettant de caractériser l’activité de précurseurs neuronaux dans la zone sous-ventriculaire et l’hippocampe. Ensuite, pour valider la seconde hypothèse, nous avons utlisé une version modifiée du paradigme ci-dessous, en plaçant les animaux (souris) soit dans des cages traditionnelles, soit dans des cages munies d’une roue bloquée soit dans des cages munies d’une roue fonctionnelle. Résultats: En accord avec la première hypothèse, l’activité physique prolongée volontaire a augmenté la prolifération des précurseurs neuronaux ainsi que la neurogenèse dans le gyrus dentelé de l’hippocampe comparativement aux animaux témoins, confirmant les résultats d’études antérieures. Par ailleurs, dans ce paradigme, nous avons aussi observé de la prolifération acrue au sein de la zone sous-ventriculaire du prosencéphale. De plus, en accord avec la seconde hypothèse, les souris placées dans une cage à roue bloquée ont montré une augmentation de la prolifération des précurseurs neuronaux dans l’hippocampe comparable à celle observée chez les souris ayant accès à une roue fonctionnelle (coureurs). Cependant, seuls les animaux coureurs ont présenté une augmentation de la neurogenèse hippocampale. Conclusions: Ces résultats nous ont permis de tirer deux conclusions nouvelles concernant les effets de l’activité physique (course) sur la neurogenèse. Premièrement, en plus de la prolifération et de la neurogenèse dans le gyrus dentelé de l’hippocampe, la prolifération dans la zone sous-ventriculaire du prosencéphale peut être augmentée par l’activité physique sur roue. Deuxièmement, l’environnement dans lequel l’activité physique a lieu contient différents stimuli qui peuvent influencer certains aspects de la neurogenèse hippocampale en l’absence d’activité physique sur roue (course).

Coût bioenergetique des modes de déplacements irréguliers en sport

The objective of this thesis was to quantify the physiological responses such as O2 uptake (VO2), heart rate (HR) and blood lactate ([LA]) to some types of activities associated with intermittent sports in athletes. Our hypothesis is that the introduction of accelerations and decelerations with or without directional changes results in a significative increase of the oxygen consumption, heart rate and blood lactate. The purpose of the first study was to measure and compare the VO2 and the HR of 6 on-court tennis drills at both high and low displacement speeds. These drills were done with and without striking the ball, over full and half-width court, in attack or in defense mode, using backhand or forehand strokes. Results show that playing an attacking style requires 6.5% more energy than playing a defensive style (p < 0.01) and the backhand stroke required 7% more VO2 at low speed than forehand stroke (p < 0.05) while the additional cost of striking the ball lies between 3.5 and 3.0 mL kg-1 min-1. Finally, while striking the ball, the energy expanded during a shuttle displacement on half-width court is 14% higher than running on full-width court. Studies #2 and #3 focused on different modes of displacement observed in irregular sports. The objective of the second study was to measure and compare VO2, HR and [LA] responses to randomly performed multiple fractioned runs with directional changes (SR) and without directional changes (FR) to those of in-line running (IR) at speeds corresponding to 60, 70 and 80% of the subject’s maximal aerobic speed (MAS). All results show that IR’s VO2 was significantly lower than SR’s and FR’s (p<0.05). SR’s VO2 was greater than FR’s only at speeds corresponding to 80%MAS. On the other hand, HR was similar in SR and FR but significantly higher than IR’s (p<0.05). [LA] varied between 4.2 ± 0.8 and 6.6 ± 0.9 mmol L-1 without significant differences between the 3 displacement modes. Finally, the third study’s objective was to measure and compare VO2 , HR and [LA] responses during directional changes at different angles and at different submaximal running speeds corresponding to 60, 70 and 80% MAS. Subjects randomly performed 4 running protocols 1) a 20-m shuttle running course (180°) (SR), 2) an 8-shaped running course with 90-degree turns every 20 m (90R), 3) a Zigzag running course (ZZR) with multiple close directional changes (~ 5 m) at different angle values of 91.8°, 90° and 38.6°, 4) an In-line run (IR) for comparison purposes. Results show that IR’s was lower (p<0.001) than for 90R’s, SR’s and ZZR’s at all intensities. VO2 obtained at 60 and 70%MAS was 48.7 and 38.1% higher during ZZR when compared to IR while and depending on the intensity, during 90R and SR was between 15.5 and 19.6% higher than during IR. Also, ZZR’s VO2 was 26.1 and 19.5% higher than 90R’s, 26.1 and 15.5% higher than SR’s at 60 and 70%MAS. SR’s and 90R’s VO2 were similar. Changing direction at a 90° angle and at 180° angle seem similar when compared to continuous in-line running. [LA] levels were similar in all modalities. Overall, the studies presented in this thesis allow the quantification of the specific energetic demands of certain types of displacement modes in comparison with conventional forward running. Also, our results confirm that the energy cost varies and increase with the introduction of accelerations and decelerations with and without directional changes.

Design and synthesis of efficient mac architectures for high speed decimal processor

Most of the commercial and financial data are stored in decimal fonn. Recently, support for decimal arithmetic has received increased attention due to the growing importance in financial analysis, banking, tax calculation, currency conversion, insurance, telephone billing and accounting. Performing decimal arithmetic with systems that do not support decimal computations may give a result with representation error, conversion error, and/or rounding error. In this world of precision, such errors are no more tolerable. The errors can be eliminated and better accuracy can be achieved if decimal computations are done using Decimal Floating Point (DFP) units. But the floating-point arithmetic units in today's general-purpose microprocessors are based on the binary number system, and the decimal computations are done using binary arithmetic. Only few common decimal numbers can be exactly represented in Binary Floating Point (BF P). ln many; cases, the law requires that results generated from financial calculations performed on a computer should exactly match with manual calculations. Currently many applications involving fractional decimal data perform decimal computations either in software or with a combination of software and hardware. The performance can be dramatically improved by complete hardware DFP units and this leads to the design of processors that include DF P hardware.VLSI implementations using same modular building blocks can decrease system design and manufacturing cost. A multiplexer realization is a natural choice from the viewpoint of cost and speed.This thesis focuses on the design and synthesis of efficient decimal MAC (Multiply ACeumulate) architecture for high speed decimal processors based on IEEE Standard for Floating-point Arithmetic (IEEE 754-2008). The research goal is to design and synthesize deeimal'MAC architectures to achieve higher performance.Efficient design methods and architectures are developed for a high performance DFP MAC unit as part of this research.

An efficient scheme for the evaluation of coding performance of high speed links incorporating joint error behaviour based on Monte Carlo Method

While channel coding is a standard method of improving a system’s energy efficiency in digital communications, its practice does not extend to high-speed links. Increasing demands in network speeds are placing a large burden on the energy efficiency of high-speed links and render the benefit of channel coding for these systems a timely subject. The low error rates of interest and the presence of residual intersymbol interference (ISI) caused by hardware constraints impede the analysis and simulation of coded high-speed links. Focusing on the residual ISI and combined noise as the dominant error mechanisms, this paper analyses error correlation through concepts of error region, channel signature, and correlation distance. This framework provides a deeper insight into joint error behaviours in high-speed links, extends the range of statistical simulation for coded high-speed links, and provides a case against the use of biased Monte Carlo methods in this setting

Simulation and Design of a high speed Solid State Switch for Excimer Laser

Excimerlaser sind gepulste Gaslaser, die Laseremission in Form von Linienstrahlung – abhängig von der Gasmischung – im UV erzeugen. Der erste entladungsgepumpte Excimerlaser wurde 1977 von Ischenko demonstriert. Alle kommerziell verfügbaren Excimerlaser sind entladungsgepumpte Systeme. Um eine Inversion der Besetzungsdichte zu erhalten, die notwendig ist, um den Laser zum Anschwingen zu bekommen, muss aufgrund der kurzen Wellenlänge sehr stark gepumpt werden. Diese Pumpleistung muss von einem Impulsleistungsmodul erzeugt werden. Als Schaltelement gebräuchlich sind Thyratrons, Niederdruckschaltröhren, deren Lebensdauer jedoch sehr limitiert ist. Deshalb haben sich seit Mitte der 1990iger Jahre Halbleiterschalter mit Pulskompressionsstufen auch in dieser Anwendung mehr und mehr durchgesetzt. In dieser Arbeit wird versucht, die Pulskompression durch einen direkt schaltenden Halbleiterstapel zu ersetzen und dadurch die Verluste zu reduzieren sowie den Aufwand für diese Pulskompression einzusparen. Zudem kann auch die maximal mögliche Repetitionsrate erhöht werden. Um die Belastung der Bauelemente zu berechnen, wurden für alle Komponenten möglichst einfache, aber leistungsfähige Modelle entwickelt. Da die normalerweise verfügbaren Daten der Bauelemente sich aber auf andere Applikationen beziehen, mussten für alle Bauteile grundlegende Messungen im Zeitbereich der späteren Applikation gemacht werden. Für die nichtlinearen Induktivitäten wurde ein einfaches Testverfahren entwickelt um die Verluste bei sehr hohen Magnetisierungsgeschwindigkeiten zu bestimmen. Diese Messungen sind die Grundlagen für das Modell, das im Wesentlichen eine stromabhängige Induktivität beschreibt. Dieses Modell wurde für den „magnetic assist“ benützt, der die Einschaltverluste in den Halbleitern reduziert. Die Impulskondensatoren wurden ebenfalls mit einem in der Arbeit entwickelten Verfahren nahe den späteren Einsatzparametern vermessen. Dabei zeigte sich, dass die sehr gebräuchlichen Class II Keramikkondensatoren für diese Anwendung nicht geeignet sind. In der Arbeit wurden deshalb Class I Hochspannungs- Vielschicht- Kondensatoren als Speicherbank verwendet, die ein deutlich besseres Verhalten zeigen. Die eingesetzten Halbleiterelemente wurden ebenfalls in einem Testverfahren nahe den späteren Einsatzparametern vermessen. Dabei zeigte sich, dass nur moderne Leistungs-MOSFET´s für diesen Einsatz geeignet sind. Bei den Dioden ergab sich, dass nur Siliziumkarbid (SiC) Schottky Dioden für die Applikation einsetzbar sind. Für die Anwendung sind prinzipiell verschiedene Topologien möglich. Bei näherer Betrachtung zeigt sich jedoch, dass nur die C-C Transfer Anordnung die gewünschten Ergebnisse liefern kann. Diese Topologie wurde realisiert. Sie besteht im Wesentlichen aus einer Speicherbank, die vom Netzteil aufgeladen wird. Aus dieser wird dann die Energie in den Laserkopf über den Schalter transferiert. Aufgrund der hohen Spannungen und Ströme müssen 24 Schaltelemente in Serie und je 4 parallel geschaltet werden. Die Ansteuerung der Schalter wird über hochisolierende „Gate“-Transformatoren erreicht. Es zeigte sich, dass eine sorgfältig ausgelegte dynamische und statische Spannungsteilung für einen sicheren Betrieb notwendig ist. In der Arbeit konnte ein Betrieb mit realer Laserkammer als Last bis 6 kHz realisiert werden, der nur durch die maximal mögliche Repetitionsrate der Laserkammer begrenzt war.