Internal Residual Stress Measurements in a Bioactive Glass-Ceramic Using Vickers Indentation

The residual stress distribution that arises in the glass matrix during cooling of a partially crystallized 17.2Na(2)O-32.1CaO-48.1SiO(2)-2.5P(2)O(5) (mol%) bioactive glass-ceramic was measured using the Vickers indentation method proposed by Zeng and Rowcliffe (ZR). The magnitude of the determined residual stress at the crystal/glass boundary was 1/4-1/3 of the values measured using X-ray diffraction (within the crystals) and calculated using Selsing`s model. A correction for the crack geometry factor, assuming a semi-elliptical shape, is proposed and then good agreement between experimental and theoretical values is found. Thus, if the actual crack geometry is taken into account, the indentation technique of ZR can be successfully used. In addition, a numerical model for the calculation of residual stresses that takes into account the hemispherical shape of the crystalline precipitates at a free surface was developed. The result is that near the sample surface, the radial component of the residual stress is increased by 70% in comparison with the residual stress calculated by Selsing`s model.

A simple relation between the Leimkuhler curve and the mean residual life

In this paper, a simple relation between the Leimkuhler curve and the mean residual life is established. The result is illustrated with several models commonly used in informetrics, such as exponential, Pareto and lognormal. Finally, relationships with some other reliability concepts are also presented. (C) 2010 Elsevier Ltd. All rights reserved.

Influence of education and depressive symptoms on cognitive function in the elderly

Objective: The purpose of the present study was to investigate the influence that education and depression have on the performance of elderly people in neuropsychological tests. Methods: The study was conducted at the Institute of Psychiatry, University of Sao Paulo School of Medicine, Hospital das Clinicas. All of the individuals evaluated were aged 60 or older. The study sample consisted of 59 outpatients with depressive disorders and 51 healthy controls. We stratified the sample by level of education: low = 1-4 years of schooling; high = 5 or more years of schooling. Evaluations consisted of psychiatric assessment, cognitive assessment, laboratory tests and cerebral magnetic resonance imaging. Results: We found that level of education influenced all the measures of cognitive domains investigated (intellectual efficiency, processing speed, attention, executive function and memory) except the Digit Span Forward and Fuld Object Memory Evaluation (immediate and delayed recall), whereas depressive symptoms influenced some measures of memory, attention, executive function and processing speed. Although the combination of a low level of education and depression had a significant negative influence on Stroop Test part B, Trail Making Test part B and Logical Memory (immediate recall), we found no other significant effects of the interaction between level of education and depression. Conclusion: The results of this study underscore the importance of considering the level of education in the analysis of cognitive performance in depressed elderly patients, as well as the relevance of developing new cognitive function tests in which level of education has a reduced impact on the results.

Residual-based test for Nonlinear Cointegration with application in PPPs

Nested by linear cointegration first provided in Granger (1981), the definition of nonlinear cointegration is presented in this paper. Sequentially, a nonlinear cointegrated economic system is introduced. What we mainly study is testing no nonlinear cointegration against nonlinear cointegration by residual-based test, which is ready for detecting stochastic trend in nonlinear autoregression models. We construct cointegrating regression along with smooth transition components from smooth transition autoregression model. Some properties are analyzed and discussed during the estimation procedure for cointegrating regression, including description of transition variable. Autoregression of order one is considered as the model of estimated residuals for residual-based test, from which the teststatistic is obtained. Critical values and asymptotic distribution of the test statistic that we request for different cointegrating regressions with different sample sizes are derived based on Monte Carlo simulation. The proposed theoretical methods and models are illustrated by an empirical example, comparing the results with linear cointegration application in Hamilton (1994). It is concluded that there exists nonlinear cointegration in our system in the final results.

Residual-based Inference for Common Nonlinear Features

This paper investigates common nonlinear features in multivariate nonlinear autore-gressive models via testing the estimated residuals. A Wald-type test is proposed and itis asymptotically Chi-squared distributed. Simulation studies are given to examine thefinite-sample properties of the proposed test.

Genetic Control of Residual Variance for Teat Number in Pigs

The genetic improvement in litter size in pigs has been substantial during the last 10-15 years. The number of teats on the sow must increase as well to meet the needs of the piglets, because each piglet needs access to its own teat. We applied a genetic heterogeneity model on teat numberin sows, and estimated medium-high heritability for teat number (0.5), but low heritability for residual variance (0.05), indicating that selection for reduced variance might have very limited effect. A numerically positive correlation (0.8) between additive genetic breeding values for mean and for variance was found, but because of the low heritability for residual variance, the variance will increase very slowly with the mean.

Self-reported symptoms and motor tests via telemetry in a 36-month levodopa-carbidopa intestinal gel infusion trial

Objective To investigate if a home environment test battery can be used to measure effects of Parkinson’s disease (PD) treatment intervention and disease progression. Background Seventy-seven patients diagnosed with advanced PD were recruited in an open longitudinal 36-month study at 10 clinics in Sweden and Norway; 40 of them were treated with levodopa-carbidopa intestinal gel (LCIG) and 37 patients were candidates for switching from oral PD treatment to LCIG. They utilized a mobile device test battery, consisting of self-assessments of symptoms and objective measures of motor function through a set of fine motor tests (tapping and spiral drawings), in their homes. Both the LCIG-naïve and LCIG-non-naïve patients used the test battery four times per day during week-long test periods. Methods Assessments The LCIG-naïve patients used the test battery at baseline (before LCIG), month 0 (first visit; at least 3 months after intraduodenal LCIG), and thereafter quarterly for the first year and biannually for the second and third years. The LCIG-non-naïve patients used the test battery from the first visit, i.e. month 0. Out of the 77 patients, only 65 utilized the test battery; 35 were LCIG-non-naïve and 30 LCIG-naïve. In 20 of the LCIG-naïve patients, assessments with the test battery were available during oral treatment and at least one test period after having started infusion treatment. Three LCIG-naïve patients did not use the test battery at baseline but had at least one test period of assessments thereafter. Hence, n=23 in the LCIG-naïve group. In total, symptom assessments in the full sample (including both patient groups) were collected during 379 test periods and 10079 test occasions. For 369 of these test periods, clinical assessments including UPDRS and PDQ-39 were performed in afternoons at the start of the test periods. The repeated measurements of the test battery were processed and summarized into scores representing patients’ symptom severities over a test period, using statistical methods. Six conceptual dimensions were defined; four subjectively-reported: ‘walking’, ‘satisfied’, ‘dyskinesia’, and ‘off’ and two objectively-measured: ‘tapping’ and ‘spiral’. In addition, an ‘overall test score’ (OTS) was defined to represent the global health condition of the patient during a test period. Statistical methods Change in the test battery scores over time, that is at baseline and follow-up test periods, was assessed with linear mixed-effects models with patient ID as a random effect and test period as a fixed effect of interest. The within-patient variability of OTS was assessed using intra-class correlation coefficient (ICC), for the two patient groups. Correlations between clinical rating scores and test battery scores were assessed using Spearman’s rank correlations (rho). Results In LCIG-naïve patients, mean OTS compared to baseline was significantly improved from the first test period on LCIG treatment until month 24. However, there were no significant changes in mean OTS scores of LCIG-non-naïve patients, except for worse mean OTS at month 36 (p<0.01, n=16). The mean scores of all subjectively-reported dimensions improved significantly throughout the course of the study, except ‘walking’ at month 36 (p=0.41, n=4). However, there were no significant differences in mean scores of objectively-measured dimensions between baseline and other test periods, except improved ‘tapping’ at month 6 and month 36, and ‘spiral’ at month 3 (p<0.05). The LCIG-naïve patients had a higher within-subject variability in their OTS scores (ICC=0.67) compared to LCIG-non-naïve patients (ICC=0.71). The OTS correlated adequately with total UPDRS (rho=0.59) and total PDQ-39 (rho=0.59). Conclusions In this 3-year follow-up study of advanced PD patients treated with LCIG we found that it is possible to monitor PD progression over time using a home environment test battery. The significant improvements in the mean OTS scores indicate that the test battery is able to measure functional improvement with LCIG sustained over at least 24 months.

Automatic spiral analysis for objective assessment of motor symptoms in Parkinson's disease

Objective: To develop a method for objective quantification of PD motor symptoms related to Off episodes and peak dose dyskinesias, using spiral data gathered by using a touch screen telemetry device. The aim was to objectively characterize predominant motor phenotypes (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Background: A retrospective analysis was conducted on recordings from 65 patients with advanced idiopathic PD from nine different clinics in Sweden, recruited from January 2006 until August 2010. In addition to the patient group, 10 healthy elderly subjects were recruited. Upper limb movement data were collected using a touch screen telemetry device from home environments of the subjects. Measurements with the device were performed four times per day during week-long test periods. On each test occasion, the subjects were asked to trace pre-drawn Archimedean spirals, using the dominant hand. The pre-drawn spiral was shown on the screen of the device. The spiral test was repeated three times per test occasion and they were instructed to complete it within 10 seconds. The device had a sampling rate of 10Hz and measured both position and time-stamps (in milliseconds) of the pen tip. Methods: Four independent raters (FB, DH, AJ and DN) used a web interface that animated the spiral drawings and allowed them to observe different kinematic features during the drawing process and to rate task performance. Initially, a number of kinematic features were assessed including ‘impairment’, ‘speed’, ‘irregularity’ and ‘hesitation’ followed by marking the predominant motor phenotype on a 3-category scale: tremor, bradykinesia and/or choreatic dyskinesia. There were only 2 test occasions for which all the four raters either classified them as tremor or could not identify the motor phenotype. Therefore, the two main motor phenotype categories were bradykinesia and dyskinesia. ‘Impairment’ was rated on a scale from 0 (no impairment) to 10 (extremely severe) whereas ‘speed’, ‘irregularity’ and ‘hesitation’ were rated on a scale from 0 (normal) to 4 (extremely severe). The proposed data-driven method consisted of the following steps. Initially, 28 spatiotemporal features were extracted from the time series signals before being presented to a Multilayer Perceptron (MLP) classifier. The features were based on different kinematic quantities of spirals including radius, angle, speed and velocity with the aim of measuring the severity of involuntary symptoms and discriminate between PD-specific (bradykinesia) and/or treatment-induced symptoms (dyskinesia). A Principal Component Analysis was applied on the features to reduce their dimensions where 4 relevant principal components (PCs) were retained and used as inputs to the MLP classifier. Finally, the MLP classifier mapped these components to the corresponding visually assessed motor phenotype scores for automating the process of scoring the bradykinesia and dyskinesia in PD patients whilst they draw spirals using the touch screen device. For motor phenotype (bradykinesia vs. dyskinesia) classification, the stratified 10-fold cross validation technique was employed. Results: There were good agreements between the four raters when rating the individual kinematic features with intra-class correlation coefficient (ICC) of 0.88 for ‘impairment’, 0.74 for ‘speed’, 0.70 for ‘irregularity’, and moderate agreements when rating ‘hesitation’ with an ICC of 0.49. When assessing the two main motor phenotype categories (bradykinesia or dyskinesia) in animated spirals the agreements between the four raters ranged from fair to moderate. There were good correlations between mean ratings of the four raters on individual kinematic features and computed scores. The MLP classifier classified the motor phenotype that is bradykinesia or dyskinesia with an accuracy of 85% in relation to visual classifications of the four movement disorder specialists. The test-retest reliability of the four PCs across the three spiral test trials was good with Cronbach’s Alpha coefficients of 0.80, 0.82, 0.54 and 0.49, respectively. These results indicate that the computed scores are stable and consistent over time. Significant differences were found between the two groups (patients and healthy elderly subjects) in all the PCs, except for the PC3. Conclusions: The proposed method automatically assessed the severity of unwanted symptoms and could reasonably well discriminate between PD-specific and/or treatment-induced motor symptoms, in relation to visual assessments of movement disorder specialists. The objective assessments could provide a time-effect summary score that could be useful for improving decision-making during symptom evaluation of individualized treatment when the goal is to maximize functional On time for patients while minimizing their Off episodes and troublesome dyskinesias.

Genetic heterogeneity of residual variance : estimation of variance components using double hierarchical generalized linear models

Background: The sensitivity to microenvironmental changes varies among animals and may be under genetic control. It is essential to take this element into account when aiming at breeding robust farm animals. Here, linear mixed models with genetic effects in the residual variance part of the model can be used. Such models have previously been fitted using EM and MCMC algorithms. Results: We propose the use of double hierarchical generalized linear models (DHGLM), where the squared residuals are assumed to be gamma distributed and the residual variance is fitted using a generalized linear model. The algorithm iterates between two sets of mixed model equations, one on the level of observations and one on the level of variances. The method was validated using simulations and also by re-analyzing a data set on pig litter size that was previously analyzed using a Bayesian approach. The pig litter size data contained 10,060 records from 4,149 sows. The DHGLM was implemented using the ASReml software and the algorithm converged within three minutes on a Linux server. The estimates were similar to those previously obtained using Bayesian methodology, especially the variance components in the residual variance part of the model. Conclusions: We have shown that variance components in the residual variance part of a linear mixed model can be estimated using a DHGLM approach. The method enables analyses of animal models with large numbers of observations. An important future development of the DHGLM methodology is to include the genetic correlation between the random effects in the mean and residual variance parts of the model as a parameter of the DHGLM.

Automatic spiral analysis for objective assessment of motor symptoms in Parkinson's disease

A challenge for the clinical management of advanced Parkinson’s disease (PD) patients is the emergence of fluctuations in motor performance, which represents a significant source of disability during activities of daily living of the patients. There is a lack of objective measurement of treatment effects for in-clinic and at-home use that can provide an overview of the treatment response. The objective of this paper was to develop a method for objective quantification of advanced PD motor symptoms related to off episodes and peak dose dyskinesia, using spiral data gathered by a touch screen telemetry device. More specifically, the aim was to objectively characterize motor symptoms (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Digitized upper limb movement data of 65 advanced PD patients and 10 healthy (HE) subjects were recorded as they performed spiral drawing tasks on a touch screen device in their home environment settings. Several spatiotemporal features were extracted from the time series and used as inputs to machine learning methods. The methods were validated against ratings on animated spirals scored by four movement disorder specialists who visually assessed a set of kinematic features and the motor symptom. The ability of the method to discriminate between PD patients and HE subjects and the test-retest reliability of the computed scores were also evaluated. Computed scores correlated well with mean visual ratings of individual kinematic features. The best performing classifier (Multilayer Perceptron) classified the motor symptom (bradykinesia or dyskinesia) with an accuracy of 84% and area under the receiver operating characteristics curve of 0.86 in relation to visual classifications of the raters. In addition, the method provided high discriminating power when distinguishing between PD patients and HE subjects as well as had good test-retest reliability. This study demonstrated the potential of using digital spiral analysis for objective quantification of PD-specific and/or treatment-induced motor symptoms.

Estudo de um solo residual de arenito da rodovia RS 239 : ensaios triaxiais servo-controlados

O estudo das propriedades mecânicas dos solos estruturados necessita de equipamentos de laboratório com características específicas. No caso de ensaios triaxiais, os equipamentos devem incorporar técnicas especiais, tais como: medição local de deformações e controle automático de trajetórias de tensão. Caso o solo seja ensaiado na condição não saturada, o equipamento deve ser capaz de controlar a sucção imposta ao corpo de prova. Esta dissertação apresenta a montagem de um equipamento triaxial automatizado para o estudo de solos estruturados, saturados e não saturados, sendo que para a execução de ensaios com diferentes trajetórias de tensões, pequenas modificações devem ser introduzidas no programa. O equipamento foi montado com peças encontradas no mercado nacional e de fácil aquisição. Este equipamento dispõe de medição local de deformações baseada em sensores de efeito Hall, com uma resolução de deformações axiais e radiais da ordem de 10-4. O equipamento utiliza um sistema de válvulas proporcionais para o controle automático das pressões aplicadas. O equipamento assim construído, foi utilizado para estudar o comportamento mecânico de um solo residual de arenito Botucatu oriundo de uma jazida na rodovia RS 239. Este solo apresenta um índice de vazios médio de 0,62. Envoltórias de resistência ao cisalhamento para valores de pico e para valores de deformações axiais >10%, foram determinadas a partir de resultados de ensaios triaxiais. Os resultados dos ensaios também permitiram identificar uma superfície de fluência. O efeito da cimentação, tanto na superfície de fluência como no módulo de Young, foi constatado através da análise das curvas tensão desvio x deformação axial, que mostram claramente uma mudança de comportamento associada à progressiva desestruturação do material.

Estudo do comportamento de um solo residual melhorado atraves de tecnicas mecanicas e fisico-quimicas e sua aplicacao a analise de fundacoes superficiais

O presente trabalho tem como objetivo estudar o comportamento de um solo residual melhorado através do uso de técnicas mecânicas de compactação e da adição de cimento. Complementarmente foram realizadas análises numéricas destes materiais tratados quando utilizados como base de fundações superficiais. O programa experimental incluiu a retirada de amostras intactas e de material amolgado para a execução de ensaios triaxiais saturados drenados com medida interna de deformações, a fim de estudar o comportamento do solo natural e do solo tratado, quer por compactação, quer por adição de cimento e compactação. Além disto, tais ensaios são determinantes na obtenção de parâmetros constitutivos para a realização de simulações numéricas. O Método dos Elementos Finitos foi utilizado para simular o comportamento carga versus recalque de placas assentes sobre o solo natural e sobre camadas de solo melhorado. O modelo Hiperbólico foi empregado na análise numérica para modelar o comportamento tensãodeformação dos materiais. Os resultados das simulações dos ensaios de placa sobre camadas de solo melhorado demonstraram que houve um aumento significativo da capacidade de suporte, além de uma redução considerável dos recalques, quando comparados ao comportamento do solo natural.

Investigação sobre a resistência ao cisalhamento de um solo residual de gnaisse

O solo residual de gnaisse estudado nesta dissertação ocupa uma grande área da cidade de Porto Alegre/RS e região metropolitana. Na região onde foi amostrado, encontrase hoje uma estrutura de contenção em solo grampeado. Rupturas durante a escavação ocasionaram a necessidade de redimensionamento da estrutura, o que na época foi realizado através de retro-análises de rupturas induzidas. Na ocasião a empresa responsável pela execução da obra retirou blocos indeformados de campo, para que posteriormente fossem determinadas as propriedades geomecânicas deste solo residual. O programa experimental desta dissertação envolveu: (a) ensaios de caracterização; (b) caracterização mineralógica através de difratometria de Raio-X, microscopia ótica e microscopia eletrônica;(c) determinação de parâmetros de resistência ao cisalhamento através de ensaios de cisalhamento direto e (d) determinação de parâmetros de resistência ao cisalhamento residual através de ensaios ring shear. Através dos ensaios de cisalhamento direto foi verificado que o intemperismo no local praticamente não apresenta influência nos parâmetros de resistência ao cisalhamento deste solo, pois ambas as profundidades de amostragem mantém a estrutura da rocha de origem. A resistência ao cisalhamento deste material é em grande parte comandada pela sua micro-estrutura, e principalmente pelo bandamento micáceo Em ambas profundidades foi verificada anisotropia de resistência ao cisalhamento, através de ensaios com a orientação de planos de xistosidade paralela e perpendicular à superfície de ruptura imposta pelo ensaio. Este comportamento demonstra a influência que a macro-estrutura herdada da rocha mãe tem sobre a resistência deste material. Os ensaios ring shear realizados neste material apresentaram ângulos de atrito interno residual baixos em relação ao que se espera de materiais predominantemente granulares como é o caso deste solo. Porém estes valores baixos podem ser atribuídos ao alto teor de mica existente.

Concorrência no mercado de crédito bancário brasileiro: abordagem via demanda residual

Este trabalho tem como objetivo verificar o grau de concorrência existente no mercado de crédito bancário brasileiro. A abordagem utilizada neste trabalho foi apresentada por Baker e Bresnahan (1985 e 1988) e trata da estimação da elasticidade de demanda residual, que fornece uma medida do poder de mercado da firma. Esta técnica é bastante conveniente para estimação de poder de mercado para indústrias com produtos diferenciados, como o setor bancário, onde elasticidades cruzadas são particularmente difíceis de serem mensuradas. Estimamos as curvas de demanda residual para os bancos do Brasil, Bradesco, Itaú, ABN Amro Real, Safra e Unibanco. Grande parcela dos dados foi extraída da contabilidade padrão Cosif, divulgada pelo Bacen. A partir dos resultados obtidos, observamos evidências de que o banco Safra atua competitivamente enquanto os dados dos demais bancos analisados apontam para a existência de algum poder no mercado de crédito bancário.