Assessing positive mental health in people with chronic physical health problems: correlations with socio-demographic variables and physical health status

Background: A holistic perspective on health implies giving careful consideration to the relationship between physical and mental health. In this regard the present study sought to determine the level of Positive Mental Health (PMH) among people with chronic physical health problems, and to examine the relationship between the observed levels of PMH and both physical health status and socio-demographic variables. Methods: The study was based on the Multifactor Model of Positive Mental Health (Lluch, 1999), which comprises six factors: Personal Satisfaction (F1), Prosocial Attitude (F2), Self-control (F3), Autonomy (F4), Problem-solving and Self-actualization (F5), and Interpersonal Relationship Skills (F6). The sample comprised 259 adults with chronic physical health problems who were recruited through a primary care center in the province of Barcelona (Spain). Positive mental health was assessed by means of the Positive Mental Health Questionnaire (Lluch, 1999). Results: Levels of PMH differed, either on the global scale or on specific factors, in relation to the following variables: age: global PMH scores decreased with age (r=-0.129; p=0.038); b) gender: men scored higher on F1 (t=2.203; p=0.028) and F4 (t=3.182; p=0.002), while women scored higher on F2 (t -3.086; p=0.002) and F6 (t=-2.744; p=0.007); c) number of health conditions: the fewer the number of health problems the higher the PMH score on F5 (r=-0.146; p=0.019); d) daily medication: polymedication patients had lower PMH scores, both globally and on various factors; e) use of analgesics: occasional use of painkillers was associated with higher PMH scores on F1 (t=-2.811; p=0.006). There were no significant differences in global PMH scores according to the type of chronic health condition. The only significant difference in the analysis by factors was that patients with hypertension obtained lower PMH scores on the factor Autonomy (t=2.165; p=0.032). Conclusions: Most people with chronic physical health problems have medium or high levels of PMH. The variables that adversely affect PMH are old age, polypharmacy and frequent consumption of analgesics. The type of health problem does not influence the levels of PMH. Much more extensive studies with samples without chronic pathology are now required in order to be able to draw more robust conclusions.

Priming psychic and conjuring abilities of a magic demonstration influences event interpretation and random number generation biases

Magical ideation and belief in the paranormal is considered to represent a trait-like character; people either believe in it or not. Yet, anecdotes indicate that exposure to an anomalous event can turn skeptics into believers. This transformation is likely to be accompanied by altered cognitive functioning such as impaired judgments of event likelihood. Here, we investigated whether the exposure to an anomalous event changes individuals' explicit traditional (religious) and non-traditional (e.g., paranormal) beliefs as well as cognitive biases that have previously been associated with non-traditional beliefs, e.g., repetition avoidance when producing random numbers in a mental dice task. In a classroom, 91 students saw a magic demonstration after their psychology lecture. Before the demonstration, half of the students were told that the performance was done respectively by a conjuror (magician group) or a psychic (psychic group). The instruction influenced participants' explanations of the anomalous event. Participants in the magician, as compared to the psychic group, were more likely to explain the event through conjuring abilities while the reverse was true for psychic abilities. Moreover, these explanations correlated positively with their prior traditional and non-traditional beliefs. Finally, we observed that the psychic group showed more repetition avoidance than the magician group, and this effect remained the same regardless of whether assessed before or after the magic demonstration. We conclude that pre-existing beliefs and contextual suggestions both influence people's interpretations of anomalous events and associated cognitive biases. Beliefs and associated cognitive biases are likely flexible well into adulthood and change with actual life events.

INCLUDING RISK IN ECONOMIC FEASIBILITY ANALYSIS:A STOCHASTIC SIMULATION MODEL FOR BLUEBERRY INVESTMENT DECISIONS IN CHILE

ABSTRACT The traditional method of net present value (NPV) to analyze the economic profitability of an investment (based on a deterministic approach) does not adequately represent the implicit risk associated with different but correlated input variables. Using a stochastic simulation approach for evaluating the profitability of blueberry (Vaccinium corymbosum L.) production in Chile, the objective of this study is to illustrate the complexity of including risk in economic feasibility analysis when the project is subject to several but correlated risks. The results of the simulation analysis suggest that the non-inclusion of the intratemporal correlation between input variables underestimate the risk associated with investment decisions. The methodological contribution of this study illustrates the complexity of the interrelationships between uncertain variables and their impact on the convenience of carrying out this type of business in Chile. The steps for the analysis of economic viability were: First, adjusted probability distributions for stochastic input variables (SIV) were simulated and validated. Second, the random values of SIV were used to calculate random values of variables such as production, revenues, costs, depreciation, taxes and net cash flows. Third, the complete stochastic model was simulated with 10,000 iterations using random values for SIV. This result gave information to estimate the probability distributions of the stochastic output variables (SOV) such as the net present value, internal rate of return, value at risk, average cost of production, contribution margin and return on capital. Fourth, the complete stochastic model simulation results were used to analyze alternative scenarios and provide the results to decision makers in the form of probabilities, probability distributions, and for the SOV probabilistic forecasts. The main conclusion shown that this project is a profitable alternative investment in fruit trees in Chile.

Exit times in non-Markovian drifting continuous-time random-walk processes

By appealing to renewal theory we determine the equations that the mean exit time of a continuous-time random walk with drift satisfies both when the present coincides with a jump instant or when it does not. Particular attention is paid to the corrections ensuing from the non-Markovian nature of the process. We show that when drift and jumps have the same sign the relevant integral equations can be solved in closed form. The case when holding times have the classical Erlang distribution is considered in detail.

Localized prostate cancer in Norway, the United States, and Spain: between-country differences of variables before treatment among patients eligible for curative treatment

Between-country differences in medical and sociodemographic variables, and patient-related outcomes (PROs) before treatment might explain published variations of side effects after radical prostatecomy (RP) or radiotherapy (RAD) for prostate cancer (PCa). This hypothesis was tested among 1908 patients from the United States, Spain, and Norway. Significant between-country differences were observed for most factors investigated before treatment. The observations should be considered in comparison of the frequency and severity of internationally published studies. Background: In men with PCa, large variations of PROs after RP or high-dose RAD might be related to betweencountry differences of medical and sociodemographic variables, and differences in PROs before treatment in the sexual and urinary domains. Patients and Methods: In 1908 patients with localized PCa from Norway, the United States, or Spain, the relation between medical (prostate-specific antigen, Gleason score, cT-category) and sociodemographic variables (age, education, marital status) before treatment was investigated. Using the Expanded Prostate Cancer Index Composite questionnaire, PROs before treatment within the sexual and urinary domains were also considered. Results: Compared with the European patients, American patients were younger, fewer had comorbid conditions, and more had a high education level. Fifty-three percent of the US men eligible for RP had low-risk tumors compared with 42% and 31% among the Norwegian and the Spanish patients, respectively. Among the Spanish RAD patients, 54% had had low-risk tumors compared with 34% of the American and 21% of the Norwegian men planned for RAD, respectively. Compared with the European patients, significantly fewer US patients reported moderate or severe sexual dysfunction and related problems. In most subgroups, the number of patients with sexual or urinary dysfunction exceeded that of patients with bother related to the reported dysfunction. Conclusion: Statistically significant between-country differences were observed in medical and sociodemographic variables, and in PROs before treatment within the sexual and urinary domains. Large differences between reported dysfunction and related problems within the sexual and urinary domains indicate that dysfunction and bother should be reported separately in addition to calculation of summary scores. The documented differences, not at least regarding PROs, might in part explain the large variation of side effects after treatment evident in the medical literature

Improved predictive mapping of indoor radon concentrations using ensemble regression trees based on automatic clustering of geological units.

PURPOSE: According to estimations around 230 people die as a result of radon exposure in Switzerland. This public health concern makes reliable indoor radon prediction and mapping methods necessary in order to improve risk communication to the public. The aim of this study was to develop an automated method to classify lithological units according to their radon characteristics and to develop mapping and predictive tools in order to improve local radon prediction. METHOD: About 240 000 indoor radon concentration (IRC) measurements in about 150 000 buildings were available for our analysis. The automated classification of lithological units was based on k-medoids clustering via pair-wise Kolmogorov distances between IRC distributions of lithological units. For IRC mapping and prediction we used random forests and Bayesian additive regression trees (BART). RESULTS: The automated classification groups lithological units well in terms of their IRC characteristics. Especially the IRC differences in metamorphic rocks like gneiss are well revealed by this method. The maps produced by random forests soundly represent the regional difference of IRCs in Switzerland and improve the spatial detail compared to existing approaches. We could explain 33% of the variations in IRC data with random forests. Additionally, the influence of a variable evaluated by random forests shows that building characteristics are less important predictors for IRCs than spatial/geological influences. BART could explain 29% of IRC variability and produced maps that indicate the prediction uncertainty. CONCLUSION: Ensemble regression trees are a powerful tool to model and understand the multidimensional influences on IRCs. Automatic clustering of lithological units complements this method by facilitating the interpretation of radon properties of rock types. This study provides an important element for radon risk communication. Future approaches should consider taking into account further variables like soil gas radon measurements as well as more detailed geological information.

Monotonic continuous-time random walks with drift and stochastic reset events

In this paper we consider a stochastic process that may experience random reset events which suddenly bring the system to the starting value and analyze the relevant statistical magnitudes. We focus our attention on monotonic continuous-time random walks with a constant drift: The process increases between the reset events, either by the effect of the random jumps, or by the action of the deterministic drift. As a result of all these combined factors interesting properties emerge, like the existence (for any drift strength) of a stationary transition probability density function, or the faculty of the model to reproduce power-law-like behavior. General formulas for two extreme statistics, the survival probability, and the mean exit time, are also derived. To corroborate in an independent way the results of the paper, Monte Carlo methods were used. These numerical estimations are in full agreement with the analytical predictions.

Domains of importance to the quality of life of older people from two Swiss regions

BACKGROUND: quality of life (QoL) is a subjective perception whose components may vary in importance between individuals. Little is known about which domains of QoL older people deem most important. OBJECTIVE: this study investigated in community-dwelling older people the relationships between the importance given to domains defining their QoL and socioeconomic, demographic and health status. METHODS: data were compiled from older people enrolled in the Lc65+ cohort study and two additional, population-based, stratified random samples (n = 5,300). Principal components analysis (PCA) was used to determine the underlying domains among 28 items that participants defined as important to their QoL. The components extracted were used as dependent variables in multiple linear regression models to explore their associations with socioeconomic, demographic and health status. RESULTS: PCA identified seven domains that older persons considered important to their QoL. In order of importance (highest to lowest): feeling of safety, health and mobility, autonomy, close entourage, material resources, esteem and recognition, and social and cultural life. A total of six and five domains of importance were significantly associated with education and depressive symptoms, respectively. The importance of material resources was significantly associated with a good financial situation (β = 0.16, P = 0.011), as was close entourage with living with others (β = 0.20, P = 0.007) and as was health and mobility with age (β = -0.16, P = 0.014). CONCLUSION: the importance older people give to domains of their QoL appears strongly related to their actual resources and experienced losses. These findings may help clinicians, researchers and policy makers better adapt strategies to individuals' needs.

Meta-analysis of the influence of bonding parameters on the clinical outcome of tooth-colored cervical restorations

PURPOSE: To meta-analyze the literature on the clinical performance of Class V restorations to assess the factors that influence retention, marginal integrity, and marginal discoloration of cervical lesions restored with composite resins, glass-ionomer-cement-based materials [glass-ionomer cement (GIC) and resin-modified glass ionomers (RMGICs)], and polyacid-modified resin composites (PMRC). MATERIALS AND METHODS: The English literature was searched (MEDLINE and SCOPUS) for prospective clinical trials on cervical restorations with an observation period of at least 18 months. The studies had to report about retention, marginal discoloration, marginal integrity, and marginal caries and include a description of the operative technique (beveling of enamel, roughening of dentin, type of isolation). Eighty-one studies involving 185 experiments for 47 adhesives matched the inclusion criteria. The statistical analysis was carried out by using the following linear mixed model: log (-log (Y /100)) = β + α log(T ) + error with β = log(λ), where β is a summary measure of the non-linear deterioration occurring in each experiment, including a random study effect. RESULTS: On average, 12.3% of the cervical restorations were lost, 27.9% exhibited marginal discoloration, and 34.6% exhibited deterioration of marginal integrity after 5 years. The calculation of the clinical index was 17.4% of failures after 5 years and 32.3% after 8 years. A higher variability was found for retention loss and marginal discoloration. Hardly any secondary caries lesions were detected, even in the experiments with a follow-up time longer than 8 years. Restorations placed using rubber-dam in teeth whose dentin was roughened showed a statistically significantly higher retention rate than those placed in teeth with unprepared dentin or without rubber-dam (p < 0.05). However, enamel beveling had no influence on any of the examined variables. Significant differences were found between pairs of adhesive systems and also between pairs of classes of adhesive systems. One-step self-etching had a significantly worse clinically index than two-step self-etching and three-step etch-and-rinse (p = 0.026 and p = 0.002, respectively). CONCLUSION: The clinical performance is significantly influenced by the type of adhesive system and/or the adhesive class to which the system belongs. Whether the dentin/enamel is roughened or not and whether rubberdam isolation is used or not also significantly influenced the clinical performance. Composite resin restorations placed with two-step self-etching and three-step etch-and-rinse adhesive systems should be preferred over onestep self-etching adhesive systems, GIC-based materials, and PMRCs.

Variación regional del coeficiente de atenuación de las ondas Rayleigh en el escudo europeo

A partir del análisis del modo fundamental de las ondas Rayleigh generadas por tres terremotos situados en las Azores, Sicilia y el Mar Negro se obtiene la variación regional del coeficiente de atenuación en el escudo europeo para un intervalo de periodos de 15-80 s. El método de análisis ha consistido en comparar los espectros de amplitudes observados con los calculados teóricamente. Para el calculo de estos últimos se ha utilizado un nuevo método consistente en calcular la función global de la fuente a partir de un proceso de mínimos cuadrados. Los resultados son los siguientes.

Las emociones como variables relacionadas con el cambio de hábitos de salud en familiares y amigos próximos de enfermos de cáncer

Study of the changes in health habits of 105 cancer patients’ relatives and close friends after the diagnosis. The aim is to try to verify whether the knowledge of the disease has got some impact in the modification of their life styles. The emotional alterations influence in this change of behaviour has been analysed futhermore. An interview of own creation and HADS (Anxiety Hospital and Depression Scale of Zigmond and Snaith, 1983) instrument, in a Spanish and a Catalan version, were used with this aim. The results show that 21.1% of the participants presented positive changes in their health habits after the diagnosis of the relative or close friend and 11.5% showed negative changes. In relation to the role of the emotions, averages of anxiety (14,33; d.t.=4,98) and depressive (10,17; d.t.=4,93) symptoms were higher in those subjects who made negative changes than in those who did not make any change (9,32; d.t.=5,37 and 6,33; d.t.=4,64). In addition, the youngest participants, with more depressive symptoms and who visit the subject more often, are those who become more assets modifying health habits. The results suggest that emotional alterations, mainly depressive symptoms, are associated with negative change and, therefore, it would be suitable to lend some type of attention to these alterations in the population studied with the purpose of improving their present and future health

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Selecting the most relevant variables for anaerobic digestion imbalances : Two case studies

In this study, a wrapper approach was applied to objectively select the most important variables related to two different anaerobic digestion imbalances, acidogenic states and foaming. This feature selection method, implemented in artificial neural networks (ANN), was performed using input and output data from a fully instrumented pilot plant (1 m 3 upflow fixed bed digester). Results for acidogenic states showed that pH, volatile fatty acids, and inflow rate were the most relevant variables. Results for foaming showed that inflow rate and total organic carbon were among the relevant variables, both of which were related to the feed loading of the digester. Because there is not a complete agreement on the causes of foaming, these results highlight the role of digester feeding patterns in the development of foaming

Prevalence of alcohol-impaired drivers based on random breath tests in a roadside survey

Sobriety checkpoints are not usually randomly located by traffic authorities. As such, information provided by non-random alcohol tests cannot be used to infer the characteristics of the general driving population. In this paper a case study is presented in which the prevalence of alcohol-impaired driving is estimated for the general population of drivers. A stratified probabilistic sample was designed to represent vehicles circulating in non-urban areas of Catalonia (Spain), a region characterized by its complex transportation network and dense traffic around the metropolis of Barcelona. Random breath alcohol concentration tests were performed during spring 2012 on 7,596 drivers. The estimated prevalence of alcohol-impaired drivers was 1.29 PER CENT, which is roughly a third of the rate obtained in non-random tests. Higher rates were found on weekends (1.90 PER CENT on Saturdays, 4.29 PER CENT on Sundays) and especially at night. The rate is higher for men (1.45 PER CENT) than for women (0.64 PER CENT) and the percentage of positive outcomes shows an increasing pattern with age. In vehicles with two occupants, the proportion of alcohol-impaired drivers is estimated at 2.62 PER CENT, but when the driver was alone the rate drops to 0.84 PER CENT, which might reflect the socialization of drinking habits. The results are compared with outcomes in previous surveys, showing a decreasing trend in the prevalence of alcohol-impaired drivers over time.