Riconoscimento di gesti: estensione a movimenti fini su spazi limitati. Teoria e implementazione

Riconoscere un gesto, tracciarlo ed identificarlo è una operazione complessa ed articolata. Negli ultimi anni, con l’avvento massivo di interfacce interattive sempre più sofisticate, si sono ampliati gli approcci nell’interazione tra uomo e macchina. L’obiettivo comune, è quello di avere una comunicazione “trasparente” tra l’utente e il computer, il quale, deve interpretare gesti umani tramite algoritmi matematici. Il riconoscimento di gesti è un modo per iniziare a comprendere il linguaggio del corpo umano da parte della macchina. Questa disciplina, studia nuovi modi di interazione tra questi due elementi e si compone di due macro obiettivi : (a) tracciare i movimenti di un particolare arto; (b) riconoscere tale tracciato come un gesto identificativo. Ognuno di questi due punti, racchiude in sé moltissimi ambiti di ricerca perché moltissimi sono gli approcci proposti negli anni. Non si tratta di semplice cattura dell’immagine, è necessario creare un supporto, a volte molto articolato, nel quale i dati grezzi provenienti dalla fotocamera, necessitano di filtraggi avanzati e trattamenti algoritmici, in modo tale da trasformare informazioni grezze, in dati utilizzabili ed affidabili. La tecnologia riguardo la gesture recognition è rilevante come l’introduzione delle interfacce tattili sui telefoni intelligenti. L’industria oggi ha iniziato a produrre dispositivi in grado di offrire una nuova esperienza, la più naturale possibile, agli utenti. Dal videogioco, all’esperienza televisiva gestita con dei piccoli gesti, all’ambito biomedicale, si sta introducendo una nuova generazione di dispositivi i cui impieghi sono innumerevoli e, per ogni ambito applicativo, è necessario studiare al meglio le peculiarità, in modo tale da produrre un qualcosa di nuovo ed efficace. Questo lavoro di tesi ha l’obiettivo di apportare un contributo a questa disciplina. Ad oggi, moltissime applicazioni e dispositivi associati, si pongono l’obiettivo di catturare movimenti ampi: il gesto viene eseguito con la maggior parte del corpo e occupa una posizione spaziale rilevante. Questa tesi vuole proporre invece un approccio, nel quale i movimenti da seguire e riconoscere sono fatti “nel piccolo”. Si avrà a che fare con gesti classificati fini, dove i movimenti delle mani sono compiuti davanti al corpo, nella zona del torace, ad esempio. Gli ambiti applicativi sono molti, in questo lavoro si è scelto ed adottato l’ambito artigianale.

Synthese von (Glyco-)Peptiden aus der homophilen Erkennungsregion des murinen LI-Cadherins mit und ohne chromophore Markierung

Im Rahmen der vorgelegten Arbeit wurden sowohl Peptide, als auch Glycopeptide aus der homophilen Erkennungsregion des LI-Cadherins der Maus synthetisiert. Die verwendeten tumorassoziierten Antigene: TN-, T-, Sialyl-TN, (2,6)-Sialyl-T- und (2,3)-Sialyl-T-Antigen wurden ausgehend von Galactose und L-Serin nach linearen Syntheserouten aufgebaut. Da neben der reinen Synthese auch die Konformation der dargestellten Peptide von Interesse war, sollten sie mittels FRET-Spektroskopie untersucht werden. Als Chromophore kamen neben dansyliertem L-Leucin und einem über einen Tetraethylenglycolspacer dansyliertem L-Leucin-Derivat auch ein modifiziertes Cumarinderivat zum Einsatz. Obwohl verschiedene Glycopeptide mit unterschiedlichen Saccharidstrukturen und unterschiedlichen Chromophoren-Paaren synthetisiert wurden, gelang es nicht, diese in löslicher Form zu erhalten, was die Reinigung und dementsprechend die Analyse mittels FRET unmöglich machte. Weiterhin wurden Glycopetide ohne Chromophore mit unterschiedlichen Antigenmotiven synthetisiert, deren zellbiologische Untersuchung noch aussteht.

Supramolecular approaches to organized luminescent nanostructures for sensing, labeling and imaging applications

The common thread of this thesis is the will of investigating properties and behavior of assemblies. Groups of objects display peculiar properties, which can be very far from the simple sum of respective components’ properties. This is truer, the smaller is inter-objects distance, i.e. the higher is their density, and the smaller is the container size. “Confinement” is in fact a key concept in many topics explored and here reported. It can be conceived as a spatial limitation, that yet gives origin to unexpected processes and phenomena based on inter-objects communication. Such phenomena eventually result in “non-linear properties”, responsible for the low predictability of large assemblies. Chapter 1 provides two insights on surface chemistry, namely (i) on a supramolecular assembly based on orthogonal forces, and (ii) on selective and sensitive fluorescent sensing in thin polymeric film. In chapters 2 to 4 confinement of molecules plays a major role. Most of the work focuses on FRET within core-shell nanoparticles, investigated both through a simulation model and through experiments. Exciting results of great applicative interest are drawn, such as a method of tuning emission wavelength at constant excitation, and a way of overcoming self-quenching processes by setting up a competitive deactivation channel. We envisage applications of these materials as labels for multiplexing analysis, and in all fields of fluorescence imaging, where brightness coupled with biocompatibility and water solubility is required. Adducts of nanoparticles and molecular photoswitches are investigated in the context of superresolution techniques for fluorescence microscopy. In chapter 5 a method is proposed to prepare a library of functionalized Pluronic F127, which gives access to a twofold “smart” nanomaterial, namely both (i)luminescent and (ii)surface-functionalized SCSSNPs. Focus shifts in chapter 6 to confinement effects in an upper size scale. Moving from nanometers to micrometers, we investigate the interplay between microparticles flowing in microchannels where a constriction affects at very long ranges structure and dynamics of the colloidal paste.

Visualization, manipulation and force spectroscopy of cylindrical polymer brushes

The Ph.D. thesis deals with the conformational study of individual cylindrical polymer brush molecules using atomic force microscopy (AFM). Imaging combined with single molecule manipulation has been used to unravel questions concerning conformational changes, desorption behavior and mechanical properties of individual macromolecules and supramolecular structures. In the first part of the thesis (chapter 5) molecular conformations of cylindrical polymer brushes with poly-(N-isopropylacrylamide) (PNIPAM) side chains were studied in various environmental conditions. Also micelle formation of cylindrical brush-coil blockcopolymers with polyacrylic acid side chains and polystyrene coil have been visualized. In chapter 6 the mechanical properties of single cylindrical polymer brushes with (PNIPAM) side chains were investigated. Assuming that the brushes adopt equilibrium conformation on the surface, an average persistence length of lp= (29 ± 3) nm was determined by the end-to-end distance vs. contour length analysis in terms of the wormlike chain (WLC) model. Stretching experiments suggest that an exact determination of the persistence length using force extension curves is impeded by the contribution of the side chains. Modeling the stretching of the bottle brush molecule as extension of a dual spring (side chain and main chain) explains the frequently observed very low persistence length arising from a dominant contribution of the side chain elasticity at small overall contour lengths. It has been shown that it is possible to estimate the “true” persistence length of the bottle brush molecule from the intercept of a linear extrapolation of the inverse square root of the apparent persistence length vs. the inverse contour length plot. By virtue of this procedure a “true” persistence length of 140 nm for the PNIPAM brush molecules is predicted. Chapter 7 and 8 deal with the force-extension behavior of PNIPAM cylindrical brushes studied in poor solvent conditions. The behavior is shown to be qualitatively different from that in a good solvent. Force induced globule-cylinder conformational changes are monitored using “molecule specific force spectroscopy” which is a combined AFM imaging and SMFS technique. An interesting behavior of the unfolding-folding transitions of single collapsed PNIPAM brush molecules has been observed by force spectroscopy using the so called “fly-fishing” mode. A plateau force is observed upon unfolding the collapsed molecule, which is attributed to a phase transition from a collapsed brush to a stretched conformation. Chapter 9 describes the desorption behavior of single cylindrical polyelectrolyte brushes with poly-L-lysine side chains deposited on a mica surface using the “molecule specific force spectroscopy” technique to resolve statistical discrepancies usually observed in SMFS experiments. Imaging of the brushes and inferring the persistence length from a end-to-end distance vs. contour length analysis results in an average persistence length of lp = (25 ± 5) nm assuming that the chains adopt their equilibrium conformation on the surface. Stretching experiments carried out on individual poly-L-lysine brush molecules by force spectroscopy using the “fly-fishing” mode provide a persistence length in the range of 7-23 nm in reasonable accordance with the imaging results. In chapter 10 the conformational behavior of cylindrical poly-L-lysine brush-sodium dodecyl sulfate complexes was studied using AFM imaging. Surfactant induced cylinder to helix like to globule conformational transitions were observed.

Reaktive Polymere zur funktionellen Oberflächenbeschichtung

Ziel dieser Arbeit war die gezielte Modifizierung von Oberflächen mittels multifunktioneller Polymere, die ausgehend von Aktivesterpolymeren durch polymeranaloge Reaktionen unter milden Bedingungen hergestellt werden konnten. Dazu wurden die neuartigen Akivestermonomere Pentafluorphenylacrylat PFA und Pentafluorphenylmethacrylat PFMA hergestellt und polymerisiert. PFMA konnte unter RAFT-Bedingungen mittels Cumyldithiobenzoat bzw. 4-Cyano-4-((thiobenzoyl)sulfanyl)pentansäure kontrolliert polymerisiert werden. Durch den RAFT-Prozess wurden weiterhin reaktive Blockcopolymere aus PFMA und Methylmethacrylat, N Acryloylmorpholin bzw. N,N Diethylacrylamid synthetisiert. Zur Herstellung alpha, omega-endfunktionalisierter Polymere wurde PFA mit Dithiobenzoesäure-(4-dodecylbenzyl)ester polymerisiert und durch anschließende polymeranaloge Reaktionen zu thermoschaltbaren Polymeren mit unterschiedlichem LCST-Verhalten umgesetzt, die den Aufbau polymerunterstützter Lipiddoppelschichten ermöglichen. Ausgehend von poly(PFA) wurden oberflächenaktiven multifunktionellen Polymeren hergestellt und zur Oberflächenmodifizierung von anorganischen TiO2 Nanopartikeln, TiO2-Nanodrähten und MoS2-Nanopartikeln eingesetzt. Es konnten so lösliche fluoreszierende TiO2-Nanopartikel sowohl durch in situ- als auch post-Funktionalisierung hergestellt werden. Zudem konnte durch Verwendung eines multifunktionellen Polymers mit NTA-Einheiten das Enzym Silicatein auf TiO2-Nanodrähten immobilisert werden, das durch Biokristallisation Aggregate aus TiO2-Nanodrähten und Goldnanopartikeln erzeugte.

Strukturbildungsverhalten kettensteifer Polyelektrolyte in wässrigen Lösungen am Beispiel von Poly(para-phenylen)sulfonat

An einer Vielzahl biogener Polyelektrolyte, wie z.B. den Nukleinsäuren DNA und RNA sowie Proteinen, ist die Ausbildung von Strukturhierarchien durch Selbstorganisation von Strukturelementen zu beobachten. Dabei wird das Strukturbildungsverhalten durch eine Kopplung von Wechselwirkungen auf verschiedenen Längenskalen, den kurzreichweitigen ausgeschlossenen Volumen und den langreichweitigen elektrostatischen Wechselwirkungen (Coulomb-Wechselwirkungen), die wiederum durch eine Vielzahl mikroskopische Parameter (z.B. Konformation) beeinflusst werden, bestimmt. Durch diese Komplexität ist es nicht möglich, den für die Strukturbildung hochgeladener Systeme bedeutsamen Beitrag der elektrostatischen Wechselwirkungen isoliert zu betrachten. Aus diesem Grund werden zur Aufklärung von Wechselwirkungs- und Strukturbildungsmechanismen vereinfachte Modell-Systeme herangezogen. Eine Möglichkeit besteht in der Verwendung synthetischer, kettensteifer Polyelektrolyte. Im Rahmen dieser Arbeit wurde das Aggregationsverhalten wässriger Lösungen dodecylsubstituierter Poly(para-phenylen)sulfonate (PPPS) sowie die Beeinflussung der Strukturbildung durch verschiedene Parameter charakterisiert. Als Einflussparameter wurden einerseits die Gegenion-Spezies und andererseits die Temperatur- und Konzentrations-Abhängigkeit untersucht. Hierzu wurden wässrige Lösungen der freien Säuren der PPPS mit Molekulargewichten zwischen MW = 18 kg/mol bis 58 kg/mol mittels Licht-, Röntgen- und Neutronenstreuung sowie durch Licht-, Polarisations-, Transmissionselektronen- und Rasterkraftmikroskopie in einem Konzentrationsbereich von 0,0008 < c < 1,1 g/L untersucht.

Politiofeni regioregolari funzionalizzati per applicazioni fotovoltaiche

Studi preliminari condotti dal gruppo di ricerca presso il quale ho svolto il mio lavoro di tesi, avevano dimostrato che il poli[3-(6-bromoesil)tiofene] non regioregolare funzionalizzato con idrossifenilporfirina [TPPOH] può essere utilizzato con successo per la realizzazione di celle fotovoltaiche. Il presente lavoro di tesi di laurea magistrale è stato quindi incentrato sulla sintesi e caratterizzazione di un campione di poli[3-(6-bromoesil)tiofene] [PT6Br] ad elevata regioregolarità e sulla sua successiva funzionalizzazione con diverse percentuali di 5-(4-idrossifenil)-10,15,20-trifenilporfirina [TPPOH] per ottenere i copolimeri poli[3-(6-bromoesil)tiofene-co-(3-[5-(4-fenossi)-10,15,20-trifenilporfinil]esiltiofene)] [P(T6Br-co-T6TPP)], anch’essi con elevata percentuale di concatenamenti testa-coda, al fine di valutare se la regioregolarità del polimero sia in grado di migliorare l’efficienza fotovoltaica. Il campione che ha fornito i risultati migliori è stato poi ulteriormente testato eseguendo prove su celle trattate termicamente per tempi diversi, in modo tale da verificare come la durata del riscaldamento, che incide sull’organizzazione strutturale del materiale, influisca sulle prestazioni ottenibili dalla cella stessa. I prodotti polimerici sintetizzati sono stati caratterizzati mediante tecniche spettroscopiche (NMR, FT-IR, UV-Vis), ne sono determinate le proprietà termiche ed i pesi molecolari medi e la relativa distribuzione, mediante cromatografia a permeazione su gel (GPC). Le prestazioni delle celle fotovoltaiche realizzate utilizzando i copolimeri prodotti sono state misurate tramite un multimetro Keithley ed un Solar Simulator, che permette di riprodurre l’intero spettro della radiazione solare.

Studio reologico avanzato di bitumi modificati ed additivati:proposta di una nuova procedura di aging

Le problematiche ambientali e socio – economiche legate alla costruzione di nuove infrastrutture viarie, impongono la progettazione e costruzione di strade che combinino ad elevati standard prestazionali, la riduzione dell’impatto ambientale in fase realizzativa e manutentiva. Quanto detto avvalora il crescente utilizzo di materiali bituminosi modificati con polimeri ed additivati con cere. I primi conferiscono alla miscela maggiore elastoplasticità, incrementandone la durabilità e la resistenza a fatica. Nei secondi la presenza del materiale paraffinico contribuisce a ridurre la viscosità del bitume, il che consente il notevole abbassamento della temperatura di produzione e stesa della miscela. Numerosi studi inoltre hanno dimostrato che le caratteristiche meccaniche della pavimentazione sono fortemente influenzate dal grado di ossidazione delle componenti organiche del bitume, ovvero dal fenomeno dell’invecchiamento o aging. Risulta pertanto fondamentale affiancare allo studio reologico del bitume, prove di simulazione dell’ invecchiamento nel breve e lungo termine. Nel corso della seguente ricerca si provvederà pertanto ad analizzare leganti modificati ed additivati secondo la teoria della viscoelasticità, simulando le reali condizioni di carico ed invecchiamento alle quali il bitume è sottoposto. Tutte le prove di caratterizzazione reologica avanzata prevederanno l’utilizzo del DSR (Dynamic Shear Rheometer) in varie configurazioni di prova e si simulerà l’invecchiamento a breve termine mediante RTFOT (Rolling thin film oven test). Si proporrà inoltre una nuova procedura di aging invecchiando il bitume alla temperatura di equiviscosità o Twork , ovvero a quel valore della temperatura tale per cui, in fase di messa in opera, si avrà una distribuzione molecolare omogenea del modificante all’interno del bitume. Verranno quindi effettuate ulteriori prove reologiche sui leganti invecchiati a tale temperatura. Si darà infine supporto ai risultati della ricerca effettuando prove chimiche con la tecnica analitica FTIR (Fourier Transform Infrared Spectroscopy), analizzando i cambiamenti molecolari avvenuti nel bitume a seguito dell’aggiunta del modificante e dell’invecchiamento.

Defects in thermosensitive colloidal crystals

Poly-N-Isopropylacrylamide (PNIPAM) colloidal particles form crystal phases that show a thermosensitive behaviour and can be used as atomic model systems. This polymer has both hydrophilic and hydrophobic character and has interesting stimuli-responsive properties in aqueous solution, of which the most important is the temperature response. Above a certain temperature, called Lower Critical Solution Temperature (LCST), the system undergoes a volume phase transition (VPT). Above the LCST, the water is expelled from the polymer network and the swollen state at low temperature transforms into a shrunken state at high temperature. The thermoresponsive behaviour of PNIPAM can be influenced by pH and ionic strength, as well as by the presence of copolymers, such as acrylic acid. In a system formed both by particles of PNIPAM and PNIPAM doped with acrylic acid, one can control the size ratio of the two components by changing the temperature of the mixture, while keeping particle interactions relatively the same. It is therefore possible to obtain thermoresponsive colloidal crystal in which temperature changes induce defects whose formation processes and dynamics can be analysed in an optical microscope at a convenient spatial and temporal scale. The goal of this thesis project was to find the conditions in which such a system could be formed, by using characterization techniques such as Static Light Scattering, Dynamic Light Scattering and Confocal Laser Scanning Microscopy. Two PNIPAM-AAc systems were available, and after characterization it was possible to select a suitable one, on the basis of its low polydispersity and the lack of a VPT, regardless of the external conditions (system JPN_7). The synthesis of a PNIPAM system was attempted, with particles of dimensions matching the JPN_7 system and, unlike JPN_7, displaying a VPT, and one suitable candidate for the mixed system was finally found (system CB_5). The best conditions to obtain thermoresponsive crystal were selected, and the formation and healing of defects were investigated with CLSM temperature scans. The obtained results show that the approach is the correct one and that the present report could represent a useful start for future developments in defect analysis and defect dynamics studies.

Die Prozessierung des humanen Amyloid-Vorläuferproteins im Verlauf der replikativen Seneszenz

Die Alterung stellt den größten Risikofaktor für die Entwicklung der Alzheimer Krankheit dar, wobei die biochemische Basis dieser Korrelation bisher nicht bekannt ist. Ein möglicherweise zentraler Mechanismus der Alzheimer Pathologie wird durch die Prozessierung von APP repräsentiert, die in der Synthese von Aβ resultiert. Der Einfluss zellulärer Alterung auf die Biochemie der APP-Prozessierung ist bislang weitestgehend ungeklärt. In der vorliegenden Arbeit wurde gezeigt, dass die Prozessierung von endogenem APP im Verlauf der Zellalterung humaner Fibroblasten progressiv verringert wird. Die Bildung der intrazellulären APP-Spaltfragmente (C99, C83 und AICD) nahm mit zunehmender Lebensspanne ab und war gleichfalls mit einer reduzierten Synthese von extrazellulären APP-Fragmenten (sAPP, sAPPα) verbunden. Weiterhin wurde nachgewiesen, dass die Reifung von APP in seneszenten Zellen selektiv reduziert war, und dass dies durch altersabhängig erhöhte zelluläre Cholesterolspiegel vermittelt wurde. Von den APP-prozessierenden Sekretasen waren die Proteinspiegel von Presenilin-1 und Nicastrin, beides Komponenten der γ-Sekretase, im Verlauf der Zellalterung graduell verringert. Dies hatte einen progressiven Rückgang der enzymatischen Aktivität der γ-Sekretase zur Folge, wodurch die Prozessierung von APP unmittelbar reduziert wurde. Die Proteinspiegel von ADAM10, einer α-Sekretase, sowie der β-Sekretase, BACE, wiesen keine Altersregulation auf, aber interessanterweise wurde eine erhöhte enzymatische Aktivität der β-Sekretase in seneszenten Zellen nachgewiesen. Die γ-Sekretase sowie BACE sind in Lipid Rafts lokalisiert, geordneten Membransubdomänen, die hohe Cholesterol- und Caveolin-1-Spiegel aufweisen. Obwohl das Gesamtniveau dieser strukturellen Komponenten von Lipid Rafts in seneszenten Zellen erhöht war, war die Assoziation beider Moleküle mit Lipid Rafts reduziert und sie akkumulierten in speziellen Organellen, die höchstwahrscheinlich Lipidkörper darstellen. Somit wurde gezeigt, dass Lipid Rafts im Zuge der Zellalterung disintegrieren beziehungsweise in ihrem Gesamtspiegel reduziert waren. Diese altersabhängige Membranmodifikation war mit einer veränderten Verteilung von Presenilin-1 und BACE zwischen der Lipid Raft und der Nicht Raft Fraktion der Membran verbunden, die möglicherweise das Potential dieser Enzyme zur Prozessierung von APP reduzierte. In einem zweiten Teil der Arbeit wurden transgene C. elegans konstruiert, die humanes APP exprimieren, das C-terminal an GFP gekoppelt war. Diese Würmer wiesen eine reduzierte Fertilität, Eilegedefekte und eine verzögerte post-embryonale Entwicklung auf, die möglicherweise auf eine Transgen-vermittelte Neurodegeneration zurückgeführt werden können. Durch erste Untersuchungen der Prozessierung des Transgens konnten Spaltfragmente nachgewiesen werden, die potentiell auf eine spezifische Spaltung von APP durch die endogenen Sekretasen schließen lassen. Somit werden die Prozessierung sowie die Reifung von APP durch die altersabhängige Modifikationen zellulärer Biochemie nachhaltig beeinflusst. Zukünftige Studien sollen zeigen, ob sich diese zellulären Zusammenhänge in den Gesamtorganismus C. elegans übertragen lassen. Des Weiteren sollen die altersabhängigen zellulären Veränderungen, insbesondere des Cholesterol-Metabolismus und der Sekretaseaktivitäten, weitergehend analysiert werden, um zusätzliche Erkenntnisse über altersassoziierte Regulationen möglicher therapeutischer Ziele der Alzheimer Erkrankung zu gewinnen.

Sintesi di catalizzatori supportati su silice mesoporosa e loro utilizzo per l'idrodeclorurazione di molecole clorofluorurate

La necessità di raggiungere la sostenibilità ambientale delle produzioni industriali rappresenta un motore di sviluppo per innovative tecnologie impiantistiche e nuove filosofie produttive. Ad esempio, la necessità di promuovere lo smaltimento dei clorofluorocarburi, causa i loro dimostrati effetti dannosi sullo strato di ozono stratosferico, ha promosso lo sviluppo di nuovi processi industriali. In questo ambito ha acquisito sempre maggior importanza la reazione di idrodeclorurazione di clorofluorocarburi (CFC), in particolare rivolta alla produzione di idrocarburi fluorurati insaturi che mostrano caratteristiche interessanti per la produzione di polimeri con specifiche proprietà di resistenza meccanica, termica e chimica. In questo lavoro di tesi, svolto in collaborazione con SOLVAY SPECIALTY POLYMERS ITALY, sono stati studiati catalizzatori innovativi per la reazione di idrodeclorurazione del 1,2-dicloro-1,2,2-trifluoro-1-(triflurometossi)etano (AM) a 1,2,2-trifluoro-1-(trifluorometossi)etene (MVE).

Synthesis and characterization of polyelectrolyte brushes

On the pathway to synthesizing synthetic model systems for human cartilage, macroinitiators for the ATRP of styrene sulfonate esters with different chain lengths and initiation site densities from 10 % to 100 % were synthesized. Polymer brushes from styrene sulfonate ethyl ester and styrene sulfonate dodecyl ester with varying grafting density, backbone length and side chain length were synthesized and characterized by 1H-NMR, AUC, AFM, TEM, and in the case of the ethyl esters, GPC-MALLS. Polyelectrolyte brushes from styrene sulfonate were synthesized from the corresponding esters. These brushes were characterized in solution (GPC-MALLS, static and dynamic light scattering, SANS, 1H-NMR) and on solid interfaces (AFM and TEM). It was shown that these brushes may form extended aggregates in solution. The aggregation behavior and the size and shape of the aggregates depend on the side chain length and the degree of saponification. For samples with identical backbone and side chain length, but varying degrees of ester hydrolysis, marked differences in the aggregation behavior were observed. A functionalized ATRP macroinitiator with a positively charged head group was synthesized and employed for the synthesis of a functionalized polyelectrolyte brush. These brushes were found to form complexes with negatively charged latex particles and are thus suitable as proteoglycan models in the proteoglycan-hyaluronic acid complex.

Deposizione elettrochimica di film polimerici foto-attivi per la realizzazione di celle solari

Plastic solar cells bear the potential for large-scale power generation based on flexible, lightweight, inexpensive materials. Since the discovery of the photo-induced electron transfer from a conjugated polymer (electron-donor) to fullerene or its derivatives molecules (electron-acceptors), followed by the introduction of the bulk heterojunction concept which means donors and acceptors blended together to realize the fotoactive layer, materials and deposition techniques have been extensively studied. In this work, electrochemical-deposition methods of polymeric conductive films were studied in order to realize bulk heterojunction solar cells. Indium Tin Oxide (ITO) glass electrodes modified with a thin layer of poly(3,4-ethylenedioxythiophene) (PEDOT) were electrochemically prepared under potentiodynamic and potentiostatic conditions; then those techniques were applied for the electrochemical co-deposition of donor and acceptor on modified ITO electrode to produce the active layer (blend). For the deposition of the electron-donor polymer the electropolymerization of many functionalized thiophene monomers was investigated while, as regards acceptors, fullerene was used first, then the study was focused on its derivative PCBM ([6,6]-phenyl-C61-butyric acid methyl ester). The polymeric films obtained (PEDOT and blend) were electrochemically and spectrophotometrically characterized and the film thicknesses were evaluated by atomic force microscopy (AFM). Finally, to check the performances and the efficiency of the realized solar cells, tests were carried out under standard conditions. Nowadays bulk heterojunction solar cells are still poorly efficient to be competitively commercialized. A challenge will be to find new materials and better deposition techniques in order to obtain better performances. The research has led to several breakthroughs in efficiency, with a power conversion efficiency approaching 5 %. The efficiency of the solar cells produced in this work is even lower (lower than 1 %). Despite all, solar cells of this type are interesting and may represent a cheaper and easier alternative to traditional silicon-based solar panels.

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Derivati naturali dell'acido difenolico per la sostituzione del bisfenolo A

La produzione di materie plastiche da fonti rinnovabili è oggi uno dei principali obiettivi della chimica dei polimeri. Anche se i materiali termoplastici da fonte “bio” sono stati già ampiamente studiati, non si può affermare lo stesso per i termoidurenti. Le resine epossidiche sono ampiamente usate come rivestimenti, adesivi e materiali strutturali grazie alle loro eccezionali proprietà meccaniche e alla buona resistenza al calore. Nonostante ciò, la ricerca svolta in questo campo su tali materiali è molto limitata e la loro produzione deriva ancora dalla reazione tra epicloridrina, cancerogena, e bisfenolo A, sospettato di avere effetti sul sistema ormonale. Per questo, la possibilità di trovare un sostituto per il bisfenolo A è un punto cruciale della chimica per dare una risposta eco-sostenibile alla domanda dei consumatori. L’acido difenolo è stato identificato come un buon canditato per la sostituzione del bisfenolo A, grazie alla similarità delle loro strutture. Dal momento che esso deriva dalla reazione tra acido levulinico, derivante da biomassa e fenolo, è possibile considerarlo un reagente di origine bio. Lo scopo di questo lavoro è quello di sostituire il fenolo con composti fenolici di origine naturale come m-cresolo, guaiacolo, catecolo e resorcinolo. Le molecole risultanti saranno confrontate con il bisfenolo A per ciò che concerne la possibilità di formare i rispettivi glicidil eteri tramite reazione con epicloridrina. Questo permetterebbe la formazione di un pre-polimero epossidico proveniente da fonte rinnovabile in un prossimo futuro.