Phytochemical characterization, antimicrobial activity, and antioxidant potential of Equisetum hyemale L. (Equisetaceae) extracts

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A Vale em Moçambique: uma etnografia das relações entre brasileiros e moçambicanos no cotidiano dos megaprojetos

Pós-graduação em Ciências Sociais - FCLAR

O uso da modelagem aplicada à ergonomia no desenvolvimento de produtos

Pós-graduação em Design - FAAC

O CAD 3D aplicado na validação de protótipos na indústria do vestuário

Pós-graduação em Design - FAAC

Procedimentos metodológicos em design gráfico voltados a jornais diários impressos: estudos e relatos de experiência

This paper summarizes a research that has been developed from the concern about a company’s strategic planning, once regarding the product development process and its methodological guidelines. Our goal was to check if there is an ideal methodology, peculiar to the graphic design, which could be applied to a printed newspaper condition. And then, we could deduce, according to the design practices in newspapers, its relevance. We did not intend to create a specific graphic design methodology for daily newspapers, nor the analysis of methods, but we wanted to emphasize that the familiarization with acknowledged methods in the field of visual communication, during the process of professional formation, might ease good choices in the work practice on design. The understanding of the gradual introduction of graphic design on printed daily newspapers brings about, thus, not only their visual improvement, but also allows that this kind of journalism (which depends on a graphic interface in order to make their product come true) reconsider the newspaper as a whole.

Inovação tecnológica em projetos de novos produtos: um estudo exploratório sobre relações gerenciais de integração entre unidades de uma multinacional

Although thetopic of integrationin product development is widely debated in the literature, there are few studies that address the participation by subsidiaries of multinational and R & D centers around the world in development projects of new products. Focusing on the perception of the Brazilian unit, this paper aims to present and analyze integration practices among subsidiaries, headquarters and R&D centers in product development projects in amultinational high tech company. For this purpose, was conducted an exploratory and qualitative researched operationalized by case study. Among the main results, it was noted collaboration betweenlocals marketing and engineering with the R & D centers, important role of senior management in the Brazilian unit to communicate outcomes of the strategic planning of products andtechnologies established by the headquarters to the subsidiary, the adoption of technological and information mechanisms and the application of methods such as technology roadmap.

Gestão de portfólio de produtos: práticas adotadas por uma empresa de base tecnológica de médio porte localizada na cidade de São Carlos, SP

In the context of the product development process (PDP), portfolio management plays an important role by determing the set of products that a company uses to compete. Due to its characteristics, performing continuous technological forecasting activities for developing and transferring technologies to their products through the PDP, this tends to make portfolio management a complex activity for products at these companies. This paper’s objective was to identify practices for product portfolio management in a medium-sized technology-based firm located in São Carlos, SP. Qualitative research was used and it was operationalized through a case study. Among the main results, it was noted that decisions on product portfolio depend mainly on the perception of senior management and the financial analyzes constitute the main method used for supporting the decision.

Gestão de portfólio de produtos em pequenas empresas de base tecnológica

The product portfólio management is considered relevant activity to the proper performance of the product development process. This paper aims to present the main methods of management that technology-based small businesses adopt for decision-making in product portfolio. This survey, which collected data on 31 companies was conducted. It was observed that although firms adopt market research and mapping methods and financial methods and for this decision-making, most of them based on the informal deliberations of senior management. Unable to understand the business relationships between the presence of ISO 9001 certification with greater formalization for decision making in product portfolio.

Métodos para a tomada de decisão em portfólio de produtos: um levantamento em empresas dos setores eletrônico, óptico e de informática

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação de objetos de uso cotidiano em ambiente lúdico e o impacto do design em sua adoção

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da viabilidade de produção da peça alimentação/ladrão para banheiras

The product development field daily works in the chase of new materials and technologies that fulfills the requirements of the consumer market. So, projects are developed in order to theoretically predict what will actually happen. The production of household appliance is not different. To provide a pleasant bath to the costumer, the manufacture of a bathtub counts on many components. With this in mind, this work goal is to study the possibility of production by plastic injection of the assembly water source/overflow pipe used in bathtubs and compare its production cost with the cost of the assembly acquired from third parties. The injection process is widely used on the world stage because of its numerous advantages, however, due to the high cost of the molds, it is important to estimate the time required for the return of the initial investment. To do this, a model was designed to examine its dimensions and then initiate the study of the possibility to inject the components with the available injection machine and the production cycle. With the results, it was found that there was a reduction in the cost of the finished assembly, but a very long time to return the initial investment due to the current financial scenery of the country

Simulação da suspensão tipo duplo A de um veículo off-road através do histórico de excitação do solo

The search for mechanical components validation methods, employed in product development sector, becomes more avid for less expensive solutions. As a result, programs that can simulate forces acting on a given part through finite element method are gaining more space in the market, once this process consumes less capital when compared to currently-employed empirical validation. This article shows the simulation of an off-road prototype suspension through such technique, using ground excitation history coming from field measurements and also by making use of a specific tool for obtaining dynamic loads from the model in question. The results shown at the end is key for future enhancements aiming mass reduction, for example, that may be executed on the prototype suspension system discussed here

Estudo da viabilidade de produção da peça alimentação/ladrão para banheiras

The product development field daily works in the chase of new materials and technologies that fulfills the requirements of the consumer market. So, projects are developed in order to theoretically predict what will actually happen. The production of household appliance is not different. To provide a pleasant bath to the costumer, the manufacture of a bathtub counts on many components. With this in mind, this work goal is to study the possibility of production by plastic injection of the assembly water source/overflow pipe used in bathtubs and compare its production cost with the cost of the assembly acquired from third parties. The injection process is widely used on the world stage because of its numerous advantages, however, due to the high cost of the molds, it is important to estimate the time required for the return of the initial investment. To do this, a model was designed to examine its dimensions and then initiate the study of the possibility to inject the components with the available injection machine and the production cycle. With the results, it was found that there was a reduction in the cost of the finished assembly, but a very long time to return the initial investment due to the current financial scenery of the country

Simulação da suspensão tipo duplo A de um veículo off-road através do histórico de excitação do solo

The search for mechanical components validation methods, employed in product development sector, becomes more avid for less expensive solutions. As a result, programs that can simulate forces acting on a given part through finite element method are gaining more space in the market, once this process consumes less capital when compared to currently-employed empirical validation. This article shows the simulation of an off-road prototype suspension through such technique, using ground excitation history coming from field measurements and also by making use of a specific tool for obtaining dynamic loads from the model in question. The results shown at the end is key for future enhancements aiming mass reduction, for example, that may be executed on the prototype suspension system discussed here

Characterization and classification of soils in the Taquari river basin - Pantanal region, state of Mato Grosso do Sul, Brazil

Among the soils in the Mato Grosso do Sul, stand out in the Pantanal biome, the Spodosols. Despite being recorded in considerable extensions, few studies aiming to characterize and classify these soils were performed. The purpose of this study was to characterize and classify soils in three areas of two physiographic types in the Taquari river basin: bay and flooded fields. Two trenches were opened in the bay area (P1 and P2) and two in the flooded field (P3 and P4). The third area (saline) with high sodium levels was sampled for further studies. In the soils in both areas the sand fraction was predominant and the texture from sand to sandy loam, with the main constituent quartz. In the bay area, the soil organic carbon in the surface layer (P1) was (OC) > 80 g kg-1, being diagnosed as Histic epipedon. In the other profiles the surface horizons had low OC levels which, associated with other properties, classified them as Ochric epipedons. In the soils of the bay area (P1 and P2), the pH ranged from 5.0 to 7.5, associated with dominance of Ca2+ and Mg2+, with base saturation above 50 % in some horizons. In the flooded fields (P3 and P4) the soil pH ranged from 4.9 to 5.9, H+ contents were high in the surface horizons (0.8-10.5 cmol c kg-1 ), Ca2+ and Mg² contents ranged from 0.4 to 0.8 cmol c kg-1 and base saturation was < 50 %. In the soils of the bay area (P1 and P2) iron was accumulated (extracted by dithionite - Fed) and OC in the spodic horizon; in the P3 and P4 soils only Fed was accumulated (in the subsurface layers). According to the criteria adopted by the Brazilian System of Soil Classification (SiBCS) at the subgroup level, the soils were classified as: P1: Organic Hydromorphic Ferrohumiluvic Spodosol. P2: Typical Orthic Ferrohumiluvic Spodosol. P3: Typical Hydromorphic Ferroluvic Spodosol. P4: Arenic Orthic Ferroluvic Spodosol.