Origin of mineralizing fluids of the sediment-hosted Navachab gold mine, Namibia: Constraints from stable (O, H, C, S) isotopes

The Navachab gold mine in the Damara belt of central Namibia is characterized by a polymetallic Au-Bi-As-Cu-Ag ore assemblage, including pyrrhotite, chalcopyrite, sphalerite, arsenopyrite, bismuth, gold, bismuthinite, and bismuth tellurides. Gold is hosted by quartz sulfide veins and semimassive sulfide lenses that are developed in a near-vertical sequence of shelf-type metasedimentary rocks, including marble, calcsilicate rock, and biotite schist. The sequence has been intruded by abundant syntectonic lamprophyre, aplite, and pegmatite dikes, documenting widespread igneous activity coeval with mineralization. The majority of quartz from the veins has delta(18)O values of 14 to 15 per mil (V-SMOW). The total variations in delta(18)O values of the biotite schist and calcsilicate rock are relatively small (12-14 parts per thousand), whereas the marble records steep gradients in delta(18)O values (17-21 parts per thousand), the lowest values being recorded at the vein margins. Despite this, there is no correlation between delta(18)O and delta(13)C values and the carbonate content of the rocks, indicating that fluid-rock interaction alone cannot explain the isotopic gradients. In addition, the marble records increased delta(13)C values at the contact to the veins, possibly related to a change in the physicochemical conditions during fluid-rock interaction. Gold is interpreted to have precipitated in equilibrium with metamorphic find (delta(18)O 12-14 parts per thousand; delta D = -40 to -60 parts per thousand) at peak metamorphic conditions of ca. 550 degrees C and 2 kbars, consistent with isotopic fractionations between coexisting calcite, garnet, and clinopyroxene in the alteration halos. The most likely source of the mineralizing fluid was a midcrustal fluid in equilibrium with the Damaran metapelites that underwent prograde metamorphism at amphibolite- to granulite-facies grades. Although there is no isotopic evidence for the contribution of magmatic fluids, they may have been important in contributing to the overall hydraulic regime and high apparent geothermal gradients (ca. 80 degrees C/km(-1)) in the mine area.

Morphostructural analysis of an alpine debris flows catchment: implication for debris supply

Rock slope instabilities are implicitly linked to the supply of sediment and debris recharging channels prone to debris flow. Hence, the incorporation of bedrock structure and terrain morphology can be relevant in the analysis of sediment budget and debris flow hazard assessment. Here, the mode of debris production of the Manival catchment (northern French Alps) is documented by the study of its morphostructural aspects extracted from high resolution DEM. Terrain implication in the process of debris supply is evaluated by: a) A systematic classification of the major morphological units based on the slope gradient that enables a spatial analysis of zones of debris production and deposition. b) A detailed structural analysis performed on DEM in order to identify potential unstable slopes. c) An analysis of the gullies orientation that informs in term of structural control of the sources zones. d) Localisation of high density joints sets that document about whether sources of continuous debris production are controlled by the structural setting of the catchment. These DEM-based indicators can be used as proxies for assessing the influences of the current topography and enable to quantify a degree of susceptibility to mass wasting and hillslope erosion activity. This present contribution suggests some directions for characterizing sediment flux dynamic in small alpine catchment.

Our Common Ground, 2005-1

Understanding Iowa’s geology and hydrology provides the critical information needed to ensure that our natural resources are properly utilized and protected. Gaining this knowledge and helping Iowans apply it is the core function of your Iowa Geological Survey (IGS).

Aitchison Geometry for Probability and Likelihood as a new approach to mathematical statistics

The Aitchison vector space structure for the simplex is generalized to a Hilbert space structure A2(P) for distributions and likelihoods on arbitrary spaces. Centralnotations of statistics, such as Information or Likelihood, can be identified in the algebraical structure of A2(P) and their corresponding notions in compositional data analysis, such as Aitchison distance or centered log ratio transform.In this way very elaborated aspects of mathematical statistics can be understoodeasily in the light of a simple vector space structure and of compositional data analysis. E.g. combination of statistical information such as Bayesian updating,combination of likelihood and robust M-estimation functions are simple additions/perturbations in A2(Pprior). Weighting observations corresponds to a weightedaddition of the corresponding evidence.Likelihood based statistics for general exponential families turns out to have aparticularly easy interpretation in terms of A2(P). Regular exponential families formfinite dimensional linear subspaces of A2(P) and they correspond to finite dimensionalsubspaces formed by their posterior in the dual information space A2(Pprior).The Aitchison norm can identified with mean Fisher information. The closing constant itself is identified with a generalization of the cummulant function and shown to be Kullback Leiblers directed information. Fisher information is the local geometry of the manifold induced by the A2(P) derivative of the Kullback Leibler information and the space A2(P) can therefore be seen as the tangential geometry of statistical inference at the distribution P.The discussion of A2(P) valued random variables, such as estimation functionsor likelihoods, give a further interpretation of Fisher information as the expected squared norm of evidence and a scale free understanding of unbiased reasoning

Some last thoughts on compositional data analysis

One of the disadvantages of old age is that there is more past than future: this,however, may be turned into an advantage if the wealth of experience and, hopefully,wisdom gained in the past can be reflected upon and throw some light on possiblefuture trends. To an extent, then, this talk is necessarily personal, certainly nostalgic,but also self critical and inquisitive about our understanding of the discipline ofstatistics. A number of almost philosophical themes will run through the talk: searchfor appropriate modelling in relation to the real problem envisaged, emphasis onsensible balances between simplicity and complexity, the relative roles of theory andpractice, the nature of communication of inferential ideas to the statistical layman, theinter-related roles of teaching, consultation and research. A list of keywords might be:identification of sample space and its mathematical structure, choices betweentransform and stay, the role of parametric modelling, the role of a sample spacemetric, the underused hypothesis lattice, the nature of compositional change,particularly in relation to the modelling of processes. While the main theme will berelevance to compositional data analysis we shall point to substantial implications forgeneral multivariate analysis arising from experience of the development ofcompositional data analysis…

Compositional Data in Biomedical Research

Modern methods of compositional data analysis are not well known in biomedical research.Moreover, there appear to be few mathematical and statistical researchersworking on compositional biomedical problems. Like the earth and environmental sciences,biomedicine has many problems in which the relevant scienti c information isencoded in the relative abundance of key species or categories. I introduce three problemsin cancer research in which analysis of compositions plays an important role. Theproblems involve 1) the classi cation of serum proteomic pro les for early detection oflung cancer, 2) inference of the relative amounts of di erent tissue types in a diagnostictumor biopsy, and 3) the subcellular localization of the BRCA1 protein, and it'srole in breast cancer patient prognosis. For each of these problems I outline a partialsolution. However, none of these problems is \solved". I attempt to identify areas inwhich additional statistical development is needed with the hope of encouraging morecompositional data analysts to become involved in biomedical research

Compositions in life science data

The aim of this talk is to convince the reader that there are a lot of interesting statisticalproblems in presentday life science data analysis which seem ultimately connected withcompositional statistics.Key words: SAGE, cDNA microarrays, (1D-)NMR, virus quasispecies

Experimental design on the simplex

Optimum experimental designs depend on the design criterion, the model andthe design region. The talk will consider the design of experiments for regressionmodels in which there is a single response with the explanatory variables lying ina simplex. One example is experiments on various compositions of glass such asthose considered by Martin, Bursnall, and Stillman (2001).Because of the highly symmetric nature of the simplex, the class of models thatare of interest, typically Scheff´e polynomials (Scheff´e 1958) are rather differentfrom those of standard regression analysis. The optimum designs are also ratherdifferent, inheriting a high degree of symmetry from the models.In the talk I will hope to discuss a variety of modes for such experiments. ThenI will discuss constrained mixture experiments, when not all the simplex is availablefor experimentation. Other important aspects include mixture experimentswith extra non-mixture factors and the blocking of mixture experiments.Much of the material is in Chapter 16 of Atkinson, Donev, and Tobias (2007).If time and my research allows, I would hope to finish with a few comments ondesign when the responses, rather than the explanatory variables, lie in a simplex.ReferencesAtkinson, A. C., A. N. Donev, and R. D. Tobias (2007). Optimum ExperimentalDesigns, with SAS. Oxford: Oxford University Press.Martin, R. J., M. C. Bursnall, and E. C. Stillman (2001). Further results onoptimal and efficient designs for constrained mixture experiments. In A. C.Atkinson, B. Bogacka, and A. Zhigljavsky (Eds.), Optimal Design 2000,pp. 225–239. Dordrecht: Kluwer.Scheff´e, H. (1958). Experiments with mixtures. Journal of the Royal StatisticalSociety, Ser. B 20, 344–360.1

Geochemistry and stable isotope composition of fresh alkaline porphyry copper tailings: Implications on sources and mobility of elements during transport and early stages of deposition

Prevention of acid mine drainage (AMD) in sulfide-containing tailings requires the identification of the geochemical processes and element pathways in the early stages of tailing deposition. However, analyses of recently deposited tailings in active tailings impoundments are scarce because mineralogical changes occur near the detection limits of many assays. This study shows that a detailed geochemical study which includes stable isotopes of water (delta H-2, delta O-18), dissolved sulfates (delta S-34, delta O-18) and hydrochernical parameter (pH, Eh, DOC, major and trace elements) from tailings samples taken at different depths in rainy and dry seasons allows the understanding of weathering (oxidation, dissolution, sorption, and desorption), water and element pathways, and mixing processes in active tailings impoundments. Fresh alkaline tailings (pH 9.2-10.2) from the Cu-Mo porphyry deposit in El Teniente, Chile had low carbonate (0.8-1.1 Wt-% CaCO3 equivalent) and sulfide concentrations (0.8-1.3 wt.%, mainly as pyrite). In the alkaline tailings water, Mo and Cu (up to 3.9 mg/L Mo and 0.016 mg/L Cu) were mobile as MoO42- and Cu (OH)(2)(0). During the flotation, tailings water reached equilibrium with gypsum (up to 738 mg/L Ca and 1765 mg/ L SO4). The delta S-34 VS. delta O-18 covariations of dissolved sulfate (2.3 to 4.5% delta S-34 and 4.1 to 6.0 % delta O-18) revealed the sulfate sources: the dissolution of primary sulfates (12.0 to 13.2%. delta S-34, 7.4 to 10.9%.delta O-18) and oxidation of primary sulfides (-6.7 to 1.7%. delta S-34). Sedimented tailings in the tailings impoundment can be divided into three layers with different water sources, element pathways, and geochemical processes. The deeper sediments (> 1 m depth) were infiltrated by catchment water, which partly replaced the original tailings water, especially during the winter season. This may have resulted in the change from alkaline to near-neutral pH and towards lower concentrations of most dissolved elements. The neutral pH and high DOC (up to 99.4 mg/L C) of the catchment water mobilized Cu (up to 0.25 mg/L) due to formation of organic Cu complexes; and Zn (up to 130 mg/L) due to dissolution of Zn oxides and desorption). At I m depth, tailings pore water obtained during the winter season was chemically and isotopically similar to fresh tailings water (pH 9.8-10.6, 26.7-35.5 mg/L Cl, 2.3-6.0 mg/L Mo). During the summer, a vadose zone evolved locally and temporarily up to 1.2 m depth. resulting in a higher concentration of dissolved solids in the pore water due to evaporation. During periodical new deposition of fresh tailings, the geochemistry of the surface layer was geochemically similar to fresh tailings. In periods without deposition, sulfide oxidation was suggested by decreasing pH (7.7-9.5), enrichment of MoO42- and SO42-, and changes in the isotopic composition of dissolved sulfates. Further enrichment for Na, K, Cl, SO4, Mg, Cu, and Mo (up to 23.8 mg/L Mo) resulted from capillary transport towards the surface followed by evaporation and the precipitation of highly soluble efflorescent salts (e.g., mirabilite, syngenite) at the tailing surface during summer. (C) 2008 Elsevier B.V. All rights reserved.

Gestão Integrada dos Recursos Hídricos da Ilha do Maio (Cabo Verde): o Contributo das Águas Subterrâneas

Cabo Verde é constituído por 10 ilhas, sendo a ilha do Maio a mais antiga do arquipélago, com uma área de 269 km2, tendo como comprimento máximo 24100 m, uma largura máxima de 16300 m e uma população total de 6740 habitantes. No que concerne à geomorfologia e geologia, a ilha é considerada plana e é composta por formações eruptivas e sedimentares, sendo as formações sedimentares dominantes na ilha. Apresenta as formações mais antigas de Cabo Verde, de idade jurássica e cretácica. No entanto, não apresenta as formações eruptivas mais recentes como as restantes ilhas. A ilha do Maio enquadra-se num clima do tipo árido e semiárido, com uma temperatura média de 24.5 ºC e uma precipitação anual de 125.4 mm. Estimativas efectuadas com base no modelo do balanço hídrico sequencial diário mostram que cerca de 7% da precipitação corresponde a escoamento superficial e 14.1% a escoamento subterrâneo. Pela aplicação deste modelo e do método do balanço químico do ião cloreto, os recursos hídricos subterrâneos renováveis anualmente na ilha do Maio estão, em ano médio, compreendidos entre 3.44 x 106 m3 e 4.76 x 106 m3.por sua vez, o escoamento total é estimado em 7.8 x 106 m3 anuais, o que equivale a cerca de 21 400 m3/dia. O escoamento subterrâneo na ilha do Maio faz-se globalmente de um modo centrífugo a partir das elevações do maciço central. O gradiente hidráulico assume valores entre 0.05% e 2.9%, sendo que o valor mais baixo ocorre no sector norte da ilha, o que favorece o fenómeno de intrusão salina. Relativamente à qualidade da água, verifica-se que as amostras recolhidas correspondem a águas muito mineralizadas, com valores de condutividade eléctrica compreendidos entre 832 μS/cm e 7730 μS/cm. Por sua vez, os valores de TDS estão compreendidos entre 705.8 mg/L e 4210.4 mg/L. Nestas condições, as águas subterrâneas analisadas podem ser consideradas águas salobras. A fácies hidroquímica dominante é a cloretada sódica, sendo que grande parte das amostras pode ser considerada cloretada-bicarbonatada sódica. Admitindo que a amostragem efectuada tem significado estatístico, poderá dizer-se que, a nível físico-químico, cerca de 20% das águas subterrâneas são próprias para o consumo humano. No que respeita à utilização da água para rega, as águas analisadas apresentam baixo a alto perigo de alcalinização do solo e alto a muito alto perigo de salinização. Em síntese, pode concluir-se que, não obstante o carácter árido da ilha do Maio, a mesma apresenta um potencial de recursos hídricos não negligenciável, eventualmente suficiente para suprir as necessidades hídricas da população. No entanto, o estudo desenvolvido mostra a necessidade de implementar medidas susceptíveis de proporcionarem um aproveitamento sustentado dos recursos hídricos, no quadro da gestão integrada dos recursos hídricos da ilha do Maio.

RAGBRAI Learn about the Land; Day 7, July 2008

Iowa’s land was mapped long before it was declared a state. Since Lewis and Clark published their journey across the North American west in 1814, many different uses for maps have been found. Today there are maps of Iowa’s roads, waterways, landscape features, geology, and land use. One of the more recent mapping efforts has involved using a technology called LiDAR. This technology creates a topographic map of Iowa’s elevation that is accurate to within eight inches, ten times higher resolution than in previous elevation maps.

3D seismic facies characterization and geological patterns recognition (Australian North West Shelf)

EXECUTIVE SUMMARY This PhD research, funded by the Swiss Sciences Foundation, is principally devoted to enhance the recognition, the visualisation and the characterization of geobodies through innovative 3D seismic approaches. A series of case studies from the Australian North West Shelf ensures the development of reproducible integrated 3D workflows and gives new insight into local and regional stratigraphic as well as structural issues. This project was initiated in year 2000 at the Geology and Palaeontology Institute of the University of Lausanne (Switzerland). Several collaborations ensured the improvement of technical approaches as well as the assessment of geological models. - Investigations into the Timor Sea structural style were carried out at the Tectonics Special Research Centre of the University of Western Australia and in collaboration with Woodside Energy in Perth. - Seismic analysis and attributes classification approach were initiated with Schlumberger Oilfield Australia in Perth; assessments and enhancements of the integrated seismic approaches benefited from collaborations with scientists from Schlumberger Stavanger Research (Norway). Adapting and refining from "linear" exploration techniques, a conceptual "helical" 3D seismic approach has been developed. In order to investigate specific geological issues this approach, integrating seismic attributes and visualisation tools, has been refined and adjusted leading to the development of two specific workflows: - A stratigraphic workflow focused on the recognition of geobodies and the characterization of depositional systems. Additionally, it can support the modelling of the subsidence and incidentally the constraint of the hydrocarbon maturity of a given area. - A structural workflow used to quickly and accurately define major and secondary fault systems. The integration of the 3D structural interpretation results ensures the analysis of the fault networks kinematics which can affect hydrocarbon trapping mechanisms. The application of these integrated workflows brings new insight into two complex settings on the Australian North West Shelf and ensures the definition of astonishing stratigraphic and structural outcomes. The stratigraphic workflow ensures the 3D characterization of the Late Palaeozoic glacial depositional system on the Mermaid Nose (Dampier Subbasin, Northern Carnarvon Basin) that presents similarities with the glacial facies along the Neotethys margin up to Oman (chapter 3.1). A subsidence model reveals the Phanerozoic geodynamic evolution of this area (chapter 3.2) and emphasizes two distinct mode of regional extension for the Palaeozoic (Neotethys opening) and Mesozoic (abyssal plains opening). The structural workflow is used for the definition of the structural evolution of the Laminaria High area (Bonaparte Basin). Following a regional structural characterization of the Timor Sea (chapter 4.1), a thorough analysis of the Mesozoic fault architecture reveals a local rotation of the stress field and the development of reverse structures (flower structures) in extensional setting, that form potential hydrocarbon traps (chapter 4.2). The definition of the complex Neogene structural architecture associated with the fault kinematic analysis and a plate flexure model (chapter 4.3) suggest that the Miocene to Pleistocene reactivation phases recorded at the Laminaria High most probably result from the oblique normal reactivation of the underlying Mesozoic fault planes. This episode is associated with the deformation of the subducting Australian plate. Based on these results three papers were published in international journals and two additional publications will be submitted. Additionally this research led to several communications in international conferences. Although the different workflows presented in this research have been primarily developed and used for the analysis of specific stratigraphic and structural geobodies on the Australian North West Shelf, similar integrated 3D seismic approaches will have applications to hydrocarbon exploration and production phases; for instance increasing the recognition of potential source rocks, secondary migration pathways, additional traps or reservoir breaching mechanisms. The new elements brought by this research further highlight that 3D seismic data contains a tremendous amount of hidden geological information waiting to be revealed and that will undoubtedly bring new insight into depositional systems, structural evolution and geohistory of the areas reputed being explored and constrained and other yet to be constrained. The further development of 3D texture attributes highlighting specific features of the seismic signal, the integration of quantitative analysis for stratigraphic and structural processes, the automation of the interpretation workflow as well as the formal definition of "seismo-morphologic" characteristics of a wide range of geobodies from various environments would represent challenging examples of continuation of this present research. The 21st century will most probably represent a transition period between fossil and other alternative energies. The next generation of seismic interpreters prospecting for hydrocarbon will undoubtedly face new challenges mostly due to the shortage of obvious and easy targets. They will probably have to keep on integrating techniques and geological processes in order to further capitalise the seismic data for new potentials definition. Imagination and creativity will most certainly be among the most important quality required from such geoscientists.

National Adaptation Programme of Action on Climate Change - 2008 - 2012

The archipelago of Cape Verde is made up of ten islands and nine islets and is located between latitudes 14º 28' N and 17º 12' N and longitudes 22º 40' W and 25º 22' W. It is located approximately 500 km from the Senegal coast in West Africa (Figure 1). The islands are divided into two groups: Windward and Leeward. The Windward group is composed of the islands of Santo Antão, São Vicente, Santa Luzia, São Nicolau, Sal and Boavista; and the Leeward group is composed of the islands Maio, Santiago, Fogo and Brava. The archipelago has a total land surface of 4,033 km2 and an Economic Exclusive Zone (ZEE) that extends for approximately 734,000 km2. In general, the relief is very steep, culminating with high elevations (e.g. 2,829 m on Fogo and 1,979 m on Santo Antão). The surface area, geophysical configuration and geology vary greatly from one island to the next. Cape Verde, due to its geomorphology, has a dense and complex hydrographical network. However, there are no permanent water courses and temporary water courses run only during the rainy season. These temporary water courses drain quickly towards the main watersheds, where, unless captured by artificial means, continue rapidly to lower areas and to the sea. This applies equally to the flatter islands. The largest watershed is Rabil with an area of 199.2 km2. The watershed areas on other islands extend over less than 70 km2. Cape Verde is both a least developed country (LDC) and a small island development state (SIDS). In 2002, the population of Cape Verde was estimated at approximately 451,000, of whom 52% were women and 48% men. The population was growing at an average 2.4% per year, and the urban population was estimated at 53.7 %. Over the past 15 years, the Government has implemented a successful development strategy, leading to a sustained economic growth anchored on development of the private sector and the integration of Cape Verde into the world economy. During this period, the tertiary sector has become increasingly important, with strong growth in the tourism, transport, banking and trade sectors. Overall, the quality of life indicators show substantial improvements in almost all areas: housing conditions, access to drinking water and sanitation, use of modern energy in both lighting and cooking, access to health services and education. Despite these overall socio-economic successes, the primary sector has witnessed limited progress. Weak performance in the primary sector has had a severe negative impact on the incomes and poverty risks faced by rural workers1. Moreover, relative poverty has increased significantly during the past decade. The poverty profile shows that: (i) extreme poverty is mostly found in rural areas, although it has also increased in urban areas; (ii) poverty is more likely to occur when the head of the household is a woman; (iii) poverty increases with family size; (iv) education significantly affects poverty; (v) the predominantly agricultural islands of Santo Antão and Fogo have the highest poverty rates; (vi) unemployment affects the poor more than the nonpoor; (vii) agriculture and fisheries workers are more likely to be poor than those in other sectors. Therefore, the fight against poverty and income inequalities remains one of the greatest challenges for Cape Verde authorities. The various governments of Cape Verde over the last decade have demonstrated a commitment to improving governance, notably by encouraging a democratic culture that guarantees stability and democratic changes without conflicts. This democratic governance offers a space for a wider participation of citizens in public management and consolidates social cohesion. However, there are some remaining challenges related to democratic governance and the gains must be systematically monitored. Finally, it is worth emphasizing that the country’s insularity has stimulated a movement to decentralized governance, although social inequalities and contrasts from one island to the next constitute, at the same time, challenges and opportunities.