Effect of Post-Deposition Annealing on the Al2O3/Si(100) Interface Properties

In the present investigation, Al2O3 thin films were deposited onto Si < 100 > substrates by DC reactive magnetron sputtering. The films were annealed in vacuum for one hour at 623, 823 and 1023 K. The composition of the films was quantitatively estimated using X-ray photoelectron spectroscopy (XPS) and the O/Al ratio was found be in the range 1.19 to 1.43. Grazing incidence X-ray diffraction (GIXRD) results revealed that the annealed films are amorphous in nature. Cross sectional transmission electron microscopy (X-TEM) analysis was carried out to study the microstructure and nature of the Al2O3-Si interface as a function of post-deposition annealing. TEM results revealed the presence of nanocrystalline gamma-Al2O3 in the annealed films and an amorphous interface layer was observed at the Al2O3 Si interface. The thickness of the amorphous interface layer was determined from the TEM analysis and the results are discussed.

Effect of post-deposition annealing on composition and electrical properties of dc reactive magnetron sputtered Al2O3 thin films

We have investigated the effect of post- deposition annealing on the composition and electrical properties of alumina (Al2O3) thin films. Al2O3 were deposited on n-type Si < 100 >. substrates by dc reactive magnetron sputtering. The films were subjected to post- deposition annealing at 623, 823 and 1023 K in vacuum. X-ray photoelectron spectroscopy results revealed that the composition improved with post- deposition annealing, and the film annealed at 1023 K became stoichiometric with an O/Al atomic ratio of 1.49. Al/Al2O3/Si metal-oxide-semiconductor (MOS) structures were then fabricated, and a correlation between the dielectric constant epsilon(r) and interface charge density Q(i) with annealing conditions were studied. The dielectric constant of the Al2O3 thin films increased to 9.8 with post- deposition annealing matching the bulk value, whereas the oxide charge density decreased to 3.11 x 10(11) cm(-2.) Studies on current-voltage IV characteristics indicated ohmic and Schottky type of conduction at lower electric fields (<0.16 MV cm(-1)) and space charge limited conduction at higher electric fields.

A framework for post-silicon realization of arbitrary instruction extensions on reconfigurable data-paths

In this paper we present a framework for realizing arbitrary instruction set extensions (IE) that are identified post-silicon. The proposed framework has two components viz., an IE synthesis methodology and the architecture of a reconfigurable data-path for realization of the such IEs. The IE synthesis methodology ensures maximal utilization of resources on the reconfigurable data-path. In this context we present the techniques used to realize IEs for applications that demand high throughput or those that must process data streams. The reconfigurable hardware called HyperCell comprises a reconfigurable execution fabric. The fabric is a collection of interconnected compute units. A typical use case of HyperCell is where it acts as a co-processor with a host and accelerates execution of IEs that are defined post-silicon. We demonstrate the effectiveness of our approach by evaluating the performance of some well-known integer kernels that are realized as IEs on HyperCell. Our methodology for realizing IEs through HyperCells permits overlapping of potentially all memory transactions with computations. We show significant improvement in performance for streaming applications over general purpose processor based solutions, by fully pipelining the data-path. (C) 2014 Elsevier B.V. All rights reserved.

A feasibility study of a post-buckled beam for actuating helicopter trailing edge flap

Active trailing edge flaps (TEFs) are one of the most promising devices for helicopter vibration reduction. Smart actuators such as the piezoelectric stack actuators (PEAs) are used for TEF actuation. PEAs possess high energy density and have large force in dynamic condition but are limited to small displacements. In this investigation, we study a linear to rotary motion amplification mechanism (AM-2) based on a pinned-pinned post-buckled beam to actuate trailing edge flaps. A linear motion amplification mechanism is developed and coupled with AM-2 to amplify angular flap deflections. Experiments are conducted on bench top-test setup, and maximum flap angle deflections of the order of 12A degrees are achieved in the static case. An aeroelastic analysis is performed and 91 % reduction in helicopter vibration is obtained with multiharmonic control inputs.

Mapping Post-translational Modifications of Mammalian Testicular Specific Histone Variant TH2B in Tetraploid and Haploid Germ Cells and Their Implications on the Dynamics of Nucleosome Structure

Histones regulate a variety of chromatin templated events by their post-translational modifications (PTMs). Although there are extensive reports on the PTMs of canonical histones, the information on the histone variants remains very scanty. Here, we report the identification of different PTMs, such as acetylation, methylation, and phosphorylation of a major mammalian histone variant TH2B. Our mass spectrometric analysis has led to the identification of both conserved and unique modifications across tetraploid spermatocytes and haploid spermatids. We have also computationally derived the 3-dimensional model of a TH2B containing nucleosome in order to study the spatial orientation of the PTMs identified and their effect on nucleosome stability and DNA binding potential. From our nucleosome model, it is evident that substititution of specific amino acid residues in TH2B results in both differential histone-DNA and histone-histone contacts. Furthermore, we have also observed that acetylation on the N-terminal tail of TH2B weakens the interactions with the DNA. These results provide direct evidence that, similar to somatic H2B, the testis specific histone TH2B also undergoes multiple PTMs, suggesting the possibility of chromatin regulation by such covalent modifications in mammalian male germ cells.

Post-failure Analysis and Fractography of In-plane Tension-Tested Tufted Carbon Fabric-Reinforced Epoxy Composite Laminates

Tufted and plain unidirectional carbon fabric-reinforced epoxy composite laminates were fabricated by vacuum-enhanced resin infusion technology and subjected to in-plane tensile tests with a view to study the changes in mechanical properties and failure responses. Owing to the presence of tufts in the laminates, both the tensile strength and modulus decrease by similar to 38 and similar to 20%, respectively, vis-A -vis the values recorded for plain composites. The fracture features point to the fact that though both the composites fail in brittle manner, they, however, exhibit differing fiber pull out lengths. Further, it was noticed that for the tufted ones, crack originates in the vicinity of tuft thread, spreads through the composite in a brittle manner, and results in a display of shorter fiber pull out lengths. These observations and other results are discussed in this paper.

Third post-Newtonian gravitational waveforms for compact binary systems in general orbits: Instantaneous terms

We compute the instantaneous contributions to the spherical harmonic modes of gravitational waveforms from compact binary systems in general orbits up to the third post-Newtonian (PN) order. We further extend these results for compact binaries in quasielliptical orbits using the 3PN quasi-Keplerian representation of the conserved dynamics of compact binaries in eccentric orbits. Using the multipolar post-Minkowskian formalism, starting from the different mass and current-type multipole moments, we compute the spin-weighted spherical harmonic decomposition of the instantaneous part of the gravitational waveform. These are terms which are functions of the retarded time and do not depend on the history of the binary evolution. Together with the hereditary part, which depends on the binary's dynamical history, these waveforms form the basis for construction of accurate templates for the detection of gravitational wave signals from binaries moving in quasielliptical orbits.

Dictionary-Learning-Based Post-Filter for HMM-Based Speech Synthesis

Oversmoothing of speech parameter trajectories is one of the causes for quality degradation of HMM-based speech synthesis. Various methods have been proposed to overcome this effect, the most recent ones being global variance (GV) and modulation-spectrum-based post-filter (MSPF). However, there is still a significant quality gap between natural and synthesized speech. In this paper, we propose a two-fold post-filtering technique to alleviate to a certain extent the oversmoothing of spectral and excitation parameter trajectories of HMM-based speech synthesis. For the spectral parameters, we propose a sparse coding-based post-filter to match the trajectories of synthetic speech to that of natural speech, and for the excitation trajectory, we introduce a perceptually motivated post-filter. Experimental evaluations show quality improvement compared with existing methods.

Study on Post Foundation of Highway Medium Guardrail

目前高速公路中央分隔带波形梁护栏立柱的实际设置中,普遍存在着由于分隔带地基强度低于压实路基,护栏立柱承载能力偏低,护栏的防护性能达不到设计要求的问题。对粘性土地基中立柱的受力情况进行了分析,并对地基为压实土与回填土两种情况进行了对比,给出了中央分隔带中立柱地基的加固方案。

Experimental Study of the Earthquake Recurrence Period and the Trend of Post-Seismic Development

In order to study the earthquake recurrence and the characteristics of earthquake series, rupture tests of rock samples and plexiglass samples were made. On rock samples, a number of acoustic emission (AE) and strain measuring points were deployed; the load was one side direct shear. The variation characteristics of AE and strain at different detecting points around the extra large fracture were observed and studied. On plexiglass samples, a series of inclined cracks were prefabricated by a small-scale compressive testing machine. The samples were then loaded on a shockproof platen, when the samples were loaded, the stress intensity factor (SIF) was determined by the laser interferometric technique and shadow optical method of caustics. The fracture conditions such as material toughness around the extra large fracture were also studied. From those experimental results and the theory of fracture mechanics, the earthquake recurrence period and the trend of post-seismic development were studied.

Induccion del celo en vacas en anestro post parto mediante la administracion de sales minerales, vitaminas y masajes ovaricos. Realizada en el municipio de Rio Blanco, departamento de Matagalpa

El presente estudio se realizó con el objetivo de establecer la efectividad del tratamiento de Inducción al celo de vacas en anestro post parto por medio de la administración de sales minerales, vitaminas y masajes ovarios; dicho tratamiento fue llevado a cabo en el municipio de Río Blanco departamento de Matagalpa. Caracterizándose por una buena distribución de las lluvias la mayor parte del año. El dicho municipio se da una predominancia de una cultura de gran alta productividad ganadera, el tamaño requerido de la muestra de este trabajo de 20 hembras en periodo de anestro post parto mayor de 50 días, las cuales fueron seleccionadas al azar y evalua das clínicamente por palpación rectal por un profesional de la medicina veterinaria. Los datos fueron analizados mediante la prueba de chi –cuadrado habiendo obtenido un resultado significativo a un nivel de confianza del 95% entre los tratamientos. Con base en los resultados obtenidos posterior al tratamiento de la administración de sales minerales, vitamina y masaje ovárico se alcan zó una respuesta positiva del 80 % al celo, el 80% en tasa de preñez y en relación a la aparición del celo posteri or al tratamiento se alcanzo una media de 6.13 días que al comparar la efectividad del tratamiento de solo la aplicación de masaje ovárico se observo un buen resultado positivo, superando las expectativas. En comparación con las hembras tratadas con solo masaje ovárico se obtuvo una respuesta positiva al celo de un 60%, con un 30% de tasa de preñez y 7.33 días promedio en anestro posterior al tratamiento, por lo tanto elaboramos la hipótesis basándonos en el estadígrafo de Chi-cuadrado obteniendo un resultado significativo empleando un nivel de significancia del 0.05% por lo que atribuimos las diferencias de ambos tratamientos.

Efectividad de la reutilizacion del CIDR (Dispositivo Intravaginal Liberador de Progesterona) en la induccion del celo y la ovulacion en vacas con anestro post-parto

El presente trabajo fue realizado en el municipio de Condega, departamento de Estelí, bajo condiciones de trópico seco y durante la época de verano. El objetivo fu e evaluar la efectividad de la reutilización del dispositivo CIDR (Dispositivo Intravaginal Liberador de Progesterona) bajo un método modificado de aplicación que incluyó el uso de GnRH y PGF2a,sobre la inducción del celo y ovulación en vacas en anestro postparto. Las variables evaluadas fueron: La efectividad sobre: presentación de celo, ovulación, porcentaje de preñez al reutilizar 3 veces el dispositivo. El grupo control consistió en un grupo de 10 animales escogidos al azar y en anestro post parto, bajo condiciones de manejo y alimentación similar, a los grupo tratado con CIDRSYNCH, los que fueron divididos en 3 subgrupos de 10 animales cada uno que igualmente estuvieron bajo condiciones de manejo y alimentación iguales a las del grupo control. En total se emplearon 40 vacas en anestro postparto. Para el análisis estadístico se azarizó bajo un DCA, y se aplicó la prueba de Chi2 modificado por valores porcentuales. Los resultados obtenidos fueron los siguientes: El 100% (30 vacas) de los animales tratados con CIDR por primera, segunda y tercera vez presentaron celo y ovulación. En cuanto al porcentaje de preñez el comportamiento fue de un 40% al utilizar el CIDR por primera y segunda vez, en tanto a la tercera utilización bajo a un 20% similar al obtenido en el grupo control sin tratamiento hormonal. Usualmente el dispositivo CIDR se utiliza una sola vez y en animales cíclicos según prospecto, sin embargo la reutilización puede ser efectiva con lo que el costo de su aplicación se reduce haciendo más accesible el método para el uso del pequeño y mediano productor.

Influencia de diferentes dosis de productos inductores de la floración (Carburo de calcio y ethrell), en dos variedades de piña (Ananas comosus (L) Merril) sobre la calidad post-cosecha

El presente estudio se estableció entre el 25 y 26 de Octubre del año 2002, con el objetivo de conocer la influencia de los productos hormonales inductores de la floración de la piña sobre la calidad post-cosecha. En los Rios (Ticuantepe) con la variedad Cayena lisa y en Mirazul del Llano (Masatepe) con la variedad Monte lirio. El diseño experimental fue un bifactorial en bloques completos al azar (BCA). Factor A, productos: Carburo de calcio, Etrhell y la combinación de ambos. Factor B, dosis de 30 y 50 cc. El área de las parcelas experimentales para cada variedad fue de 223.2 m2 con una población estimada de 864 plantas. En la calidad interna para la variedad Cayena lisa, los mayores valores fueron 12.45 porciento grados brix y 4.15 pH obtenidos con el producto Carburo de calcio más Urea y con la dosis de 50 cc. En la variedad Monte lirio 6.79 porciento grados brix con Ethrell y con la dosis de 30 cc; el pH fue de 4.43 con Carburo de calcio más Urea, con la dosis de 50 cc. En la calidad externa los frutos con mayores valores se obtuvieron en la variedad Monte lirio, la altura obtenida fue de 18 .63 cm con Carburo de calcio más Urea y con la dosis de 50 cc, el diámetro fue de 13.29 cm obtenido con Ethrell y la dosis de 30 cc, el peso fue de 2,282.70 g. obtenido con Carburo de calcio más Urea y con la dosis de 50 cc; el peso de la corona más bajo fue de 107.65 g. obtenido con Carburo de calcio más Ethrell y la dosis de 30 cc. En la variedad Cayena lisa la mayor altura fue de 16.55 cm obtenida con Ethrell y la dosis de 30 cc; el diámetro fue de 11.16 cm obtenido con Carburo de calcio más Ethrell y la dosis de 50 cc; el peso fue de 1,397.00 g. obtenido con Ethrell y la dosis de 30 cc, el peso de la corona más bajo fue de 102.60 g. obtenido con Ethrell y la dosis de 50 cc. Económicamente el tratamiento de menor costo, con mayor beneficio neto y con mejores resultados en la calidad post-cosecha es el Carburo de calcio más Urea en dosis de 50 cc.

Post-earthquake behaviour of footings employing densification to mitigate liquefaction

In situ densification is a popular technique to protect shallow foundations from the effects of earthquake-induced liquefaction, current design being based on semiempirical rules. Poor understanding of the mechanisms governing the performance of soil-structure systems during and after earthquakes inhibits the use of narrow densified zones, which could contribute to optimise the use of densification if the increase in post-earthquake settlement is restrained. Therefore this paper investigates the long-term behaviour of a footing built on densified ground and surrounded by liquefiable ground, centrifuge experiments being used to identify the mechanisms occurring in the ground during and after a seismic simulation. The differential excess pore pressure generated in the ground during the shaking and the processes of vertical stress concentration and subsequent redistribution observed under the footing dominate the system behaviour. The results enlighten the complex mechanisms determining the post-earthquake settlement when densification is carried out to mitigate liquefaction effects. The improvement in performance resulting from widening the zone of densification is rationally explained which encourages the development of new design concepts that may enhance the future use of densification as a liquefaction resistance measure. © 2007 Thomas Telford Ltd.