Theory manual to OctVCE – a cartesian cell CFD code with special application to blast wave problems, Department of Mechanical Engineering Report 2007/12

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries, in particular, from explosions. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel for its simplicity and sufficiency for practical engineering design problems. The code uses a finite-volume formulation of the unsteady Euler equations with a second order explicit Runge-Kutta Godonov (MUSCL) scheme. Gradients are calculated using a least-squares method with a minmod limiter. Flux solvers used are AUSM, AUSMDV and EFM. No fluid-structure coupling or chemical reactions are allowed, but gas models can be perfect gas and JWL or JWLB for the explosive products. This report also describes the code’s ‘octree’ mesh adaptive capability and point-inclusion query procedures for the VCE geometry engine. Finally, some space will also be devoted to describing code parallelization using the shared-memory OpenMP paradigm. The user manual to the code is to be found in the companion report 2007/13.

User guide for shock and blast simulation with the OctVCE code (version 3.5+), Department of Mechanical Engineering Report 2007/13

OctVCE is a cartesian cell CFD code produced especially for numerical simulations of shock and blast wave interactions with complex geometries. Virtual Cell Embedding (VCE) was chosen as its cartesian cell kernel as it is simple to code and sufficient for practical engineering design problems. This also makes the code much more ‘user-friendly’ than structured grid approaches as the gridding process is done automatically. The CFD methodology relies on a finite-volume formulation of the unsteady Euler equations and is solved using a standard explicit Godonov (MUSCL) scheme. Both octree-based adaptive mesh refinement and shared-memory parallel processing capability have also been incorporated. For further details on the theory behind the code, see the companion report 2007/12.

Perceived self-other differences in persuasibility: the effects of interpersonal and group-based similarity

Two experiments examined the effects of interpersonal and group-based similarity on perceived self-other differences in persuasibility (i.e. on third-person effects, Davison, 1983). Results of Experiment 1 (N=121), based on experimentally-created groups, indicated that third-person perceptions with respect to the impact of televised product ads were accentuated when the comparison was made with interpersonally different others. Contrary to predictions, third-person perceptions were not affected by group-based similarity (i.e. ingroup or outgroup other). Results of Experiment 2 (N = 102), based an an enduring social identity, indicated that both interpersonal and group-based similarity moderated perceptions of the impact on self and other of least-liked product ads. Overall, third-person effects were more pronounced with respect to interpersonally dissimilar others. However, when social identity was salient, information about interpersonal similarity of the target did not affect perceived self-other differences with respect to ingroup targets. Results also highlighted significant differences in third-person perceptions according to the perceiver's affective evaluation of the persuasive message. (C) 1998 John Wiley & Sons, Ltd.

Two dimensional computational fluid dynamic models for waste stabilisation ponds

Traditional waste stabilisation pond (WSP) models encounter problems predicting pond performance because they cannot account for the influence of pond features, such as inlet structure or pond geometry, on fluid hydrodynamics. In this study, two dimensional (2-D) computational fluid dynamics (CFD) models were compared to experimental residence time distributions (RTD) from literature. In one of the-three geometries simulated, the 2-D CFD model successfully predicted the experimental RTD. However, flow patterns in the other two geometries were not well described due to the difficulty of representing the three dimensional (3-D) experimental inlet in the 2-D CFD model, and the sensitivity of the model results to the assumptions used to characterise the inlet. Neither a velocity similarity nor geometric similarity approach to inlet representation in 2-D gave results correlating with experimental data. However. it was shown that 2-D CFD models were not affected by changes in values of model parameters which are difficult to predict, particularly the turbulent inlet conditions. This work suggests that 2-D CFD models cannot be used a priori to give an adequate description of the hydrodynamic patterns in WSP. (C) 1998 Elsevier Science Ltd. All rights reserved.

Gaze angle: a possible mechanism of visual stress in virtual reality headsets

It is known that some Virtual Reality (VR) head-mounted displays (HMDs) can cause temporary deficits in binocular vision. On the other hand, the precise mechanism by which visual stress occurs is unclear. This paper is concerned with a potential source of visual stress that has not been previously considered with regard to VR systems: inappropriate vertical gaze angle. As vertical gaze angle is raised or lowered the 'effort' required of the binocular system also changes. The extent to which changes in vertical gaze angle alter the demands placed upon the vergence eye movement system was explored. The results suggested that visual stress may depend, in part, on vertical gaze angle. The proximity of the display screens within an HMD means that a VR headset should be in the correct vertical location for any individual user. This factor may explain some previous empirical results and has important implications for headset design. Fortuitously, a reasonably simple solution exists.

Pinch my wig or winch my pig: Spelling, spoonerisms and other language skills

Phonological processing skills have often been assumed to play a minimal role in skilled adult spelling despite evidence showing their importance in the development of spelling skills. The present study investigated the relationship between phonological awareness and spelling in adults. It was hypothesised that subjects demonstrating higher levels of spelling proficiency would also show superior phonological processing skills. This relationship was expected to be mediated by sound-spelling mapping knowledge. Given the irregularities of sound-spelling correspondences in English, it was also predicted that knowledge of orthographic conventions would be related to spelling competency. Two measures of each component skill were used on seventy three university students. As predicted, the importance of spelling-sound mapping skills in spelling were demonstrated, as was a relationship between phonological awareness and spelling-sound correspondences. In addition a moderate correlation was found between orthographic tasks and spelling performance. It was concluded that, among university students at least, phonological ability makes an important contribution to skilled adult spelling.

Catalytic activities and coking characteristics of oxides-supported Ni catalysts for CH4 reforming with carbon dioxide

Catalytic activities and deactivation characteristics of oxides-supported nickel catalysts for the reaction of methane reforming with carbon dioxide were investigated. The dynamic carbon deposition on various nickel catalysts was also studied by a thermogravimetric method. Among the catalysts prepared, Ni/La2O3, Ni/alpha-Al2O3, Ni/SiO2, and Ni/CeO2 showed very high CH4 and CO2 conversions and moderate deactivation whereas Ni/MgO and Ni/TiO2 had lower conversions when the Ni reduction was conducted at 500 degrees C. When Ni/MgO catalyst was reduced at 800 degrees C, it exhibited not only comparable conversions of CH4 and CO2 with other active catalysts but also much longer period of stability without deactivation. The amount of carbon deposited in Ni-based catalysts varied depending on the nature of support and followed the order of Ni/La2O3 > Ni/alpha-Al2O3 > Ni/SiO2 > Ni/MgO > Ni/CeO2 at 700 degrees C. The carbons formed on the catalyst surface showed different structural and chemical properties, and these in turn affected the catalytic activity of the catalysts.

Attributions for the performance of self and other: It matters who the "other" is

This study tested hypotheses that locus of causality attributions for the academic performance of others are influenced by whether the other is a specific individual, or a typical other, and whether the other is similar or dissimilar to self. The research was carried out in two studies. Study 1 entailed development of two scales to measure perceptions of interpersonal similarity: 254 Australian undergraduates rated their similarity to either a specific other or to typical other students. In Study 2, 332 subjects completed one of the 16-item scales developed in Study 1, along with Rosenberg's self-esteem scale, and self-attribution and other-attribution versions of the Multidimensional Multi-attribution Causation Scale (MMCS). Results showed that attributions for the academic performance of others were strongly affected by whether the other was perceived to be similar or dissimilar to self, especially when the other was a specific individual. In particular, causal attributions for similar specific others were more favourable than attributions for self.

Experimental and theoretical investigations of adsorption hysteresis and criticality in MCM-41: Studies with O-2, Ar, and CO2

MCM-41 materials of six different pore diameters were prepared and characterized using X-ray diffraction, transmission electron microscopy, helium pycnometry, small-angle neutron scattering, and gas adsorption (argon at 77.4 and 87.4 K, nitrogen and oxygen at 77.4 K, and carbon dioxide at 194.6 K). A recent molecular continuum model of the authors, previously used for adsorption of nitrogen at 77.4 K, was applied here for adsorption of argon, oxygen, and carbon dioxide. While model predictions of single-pore adsorption isotherms for argon and oxygen are in satisfactory agreement with experimental data, significant deviation was found for carbon dioxide, most likely due to its high quadrupole moment. Predictions of critical pore diameter, below which reversible condensation occurs: were possible by the model and found to be consistent with experimental estimates, for the adsorption of the various gases. On the other hand, existing models such as the Barrett-Joyner-Halenda (BJH), Saito-Foley, and Dubinin-Astakhov models were found to be inadequate, either predicting an incorrect pore diameter or not correlating the isotherms adequately. The wall structure of MCM-41 appears to be close to that of amorphous silica, as inferred from our skeletal density measurements.

A phase-segregated model for plant cell culture: The effect of cell volume fraction

Plant cells are characterized by low water content, so the fraction of cell volume (volume fraction) in a vessel is large compared with other cell systems, even if the cell concentrations are the same. Therefore, concentration of plant cells should preferably be expressed by the liquid volume basis rather than by the total vessel volume basis. In this paper, a new model is proposed to analyze behavior of a plant cell culture by dividing the cell suspension into the biotic- and abiotic-phases, Using this model, we analyzed the cell-growth and the alkaloid production by Catharanthus roseus, Large errors in the simulated results were observed if the phase-segregation was not considered.

Modeling ex vivo hematopoiesis using chemical engineering metaphors

Ex vivo hematopoiesis is increasingly used for clinical applications. Models of ex vivo hematopoiesis are required to better understand the complex dynamics and to optimize hematopoietic culture processes. A general mathematical modeling framework is developed which uses traditional chemical engineering metaphors to describe the complex hematopoietic dynamics. Tanks and tubular reactors are used to describe the (pseudo-) stochastic and deterministic elements of hematopoiesis, respectively. Cells at any point in the differentiation process can belong to either an immobilized, inert phase (quiescent cells) or a mobile, active phase (cycling cells). The model describes five processes: (1) flow (differentiation), (2) autocatalytic formation (growth),(3) degradation (death), (4) phase transition from immobilized to mobile phase (quiescent to cycling transition), and (5) phase transition from mobile to immobilized phase (cycling to quiescent transition). The modeling framework is illustrated with an example concerning the effect of TGF-beta 1 on erythropoiesis. (C) 1998 Published by Elsevier Science Ltd. All rights reserved.

VOC removal: Comparison of MCM-41 with hydrophobic zeolites and activated carbon

The recently discovered mesoporous molecular sieve MCM-41 was tested as an adsorbent for VOC removal. Its adsorption/desorption properties were evaluated and compared with other hydrophobic zeolites (silicalite-1 and zeolite Y) and a commercial activated carbon, BPL. The adsorption isotherms of some typical VOCs (benzene, carbon tetrachloride, and n-hexane) on MCM-41 are of type IV according to the IUPAC classification, drastically different from the other microporous adsorbents, indicating that VOCs, in the gas phase, have to be at high partial pressures in order to make the most of the new mesoporous material as an adsorbent for VOC removal. However, a proper modification of the pore openings of MCM-41 can change the isotherm types from type IV to type I without remarkable loss of the accessible pare volumes and, therefore, significantly enhance the adsorption performance at low partial pressures. Adsorption isotherms of water on these adsorbents are all of type V, demonstrating that they possess a similar hydrophobicity. Desorption of VOCs from MCM-41 could be achieved at lower temperatures (50-60 degrees C), while this had to be conducted at higher temperatures (100-120 degrees C) for microporous adsorbents, zeolites, and activated carbons.

Lepocreadiidae (Digenea) of Australian coastal fishes: new species of Opechona Looss, 1907, Lepotrema Ozaki, 1932 and Bianium Stunkard, 1930 and comments on other species reported for the first time or poorly known in Australian waters

Opechona austrobacillaris n, sp. is described from Pomatomus saltatrix from marine sites off Western Australia and New South Wales, Australia. It differs from O. bacillaris in its elongate outline, small ventral sucker, longer pseudoesophagus (relative to the oesophagus), relatively shorter ventral sucker to ovary distance and the relatively longer post-testicular region. Lepotrema monile n. sp. is described from Pomacentrus wardi from Heron Island, Queensland. It differs from its congeners in the sphincter around the distal metraterm and the more-or-less oval ovary. Bianium spongiosum n. sp, is described from Ostracion cubicus from Lizard Island, Queensland. It differs from its congeners in lacking lateral flaps in the forebody, but in having large, internal spongiform patches in the lateral forebody. The following species are redescribed from Australian sites: Lepocreadium oyabitcha from Abudefduf whitleyi, Lizard Island; Clavogalea trachinoti from Trachinotus botla, Heron Island and T. coppingeri, New South Wales, Stradbroke Island, Queensland and Heron Island; Myzoxenus insolens from Notolabrus parilus, Western Australia; Bulbocirrus aulostomi from Aulostomus chinensis, Heron Island; Lepocreadioides orientalis [new synonyms: Bicaudum interruptum Bilqees, 1973; Lepocreadioides interruptum (Bilqees, 1973) Madhavi, Narasimhulu & Shameem, 1986; Lepocreadioides discum Wang, 1986; Lepocreadioides sp. of Karyakarte & Yadav (1976)] from Cynoglossus bilineata, Moreton Bay, Queensland; Hypocreadium patellare from Sufflamen chrysopterus, Heron Island; Echeneidocoelium indicum from Echeneis naucrates, Heron Island; Multitestis pyriformis from Epinephelus cyanopodus, Heron Island; Pseudopisthogonoporus vitellosus from Naso brevirostris, Heron Island; and Bianium hispidum from Torquigener whitleyi and T. pleurogramma, southern Queensland. Only M. solens and M. pyriformis have been reported from Australian waters before; both are new host records.

On uniquely determining cell-wall material properties with the compression experiment

A finite element model (FEM) of the cell-compression experiment has been developed in dimensionless form to extract the fundamental cell-wall-material properties (i.e. the constitutive equation and its parameters) from experiment force-displacement data. The FEM simulates the compression of a thin-walled, liquid-filled sphere between two flat surfaces. The cell-wall was taken to be permeable and the FEM therefore accounts for volume loss during compression. Previous models assume an impermeable wall and hence a conserved cell volume during compression. A parametric study was conducted for structural parameters representative of yeast. It was shown that the common approach of assuming reasonable values for unmeasured parameters (e.g. cell-wall thickness, initial radial stretch) can give rise to nonunique solutions for both the form and constants in the cell-wall constitutive relationship. Similarly, measurement errors can also lead to an incorrectly defined cell-wall constitutive relationship. Unique determination of the fundamental wall properties by cell compression requires accurate and precise measurement of a minimum set of parameters (initial cell radius, initial cell-wall thickness, and the volume loss during compression). In the absence of such measurements the derived constitutive relationship may be in considerable error, and should be evaluated against its ability to predict the outcome of other mechanical experiments. (C) 1998 Elsevier Science Ltd. All rights reserved.