899 resultados para Operational Productivity
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In industrial plants, there is a department responsible for planning the use of productive resources to find the best possible way to set out plans in strategic, tactical and operational levels. This department is known as PCP or PPCP, which means Planning and Production Control and Planning, Programming and Production Control, respectively. This work presents the use of some of the tools from this department, in particular the Aggregate Production Planning, to propose a new layout of electronic nutrunners for an auto parts industry output line. Through some process indicators analyzes, was identified some productivity losses. The higher loss rate occurred by the electronic nutrunners breaking, and so this work was focused in these devices. Some premises were adopted for the use of electronic nut runners, setting an ideal cycle time for the operation of the production line and making calculations to define the minimum amount of electronic nutrunners to find the production demand without damaging the equipment. With this work we observed that a relevant factor for the constant breaks of electronic nutrunners is because these are working with overload, in other words, the amount of installed equipment is not enough to supply the demand without failures
Resumo:
The zero-valent iron (ZVI) mediated degradation of the antibiotic ciprofloxacin (CIP) was studied under oxic condition. Operational parameters such as ZVI concentration and initial pH value were evaluated. Increase of the ZVI concentration from 1 to 5 g L−1 resulted in a sharp increase of the observed pseudo-first order rate constant of CIP degradation, reaching a plateau at around 10 g L−1. The contribution of adsorption to the overall removal of CIP and dissolved organic carbon (DOC) was evaluated after a procedure of acidification to pH 2.5 with sulfuric acid and sonication for 2 min. Adsorption increased as pH increased, while degradation decreased, showing that adsorption is not important for degradation. Contribution of adsorption was much more important for DOC removal than for CIP. Degradation of CIP resulted in partial defluorination since the fluoride measured corresponded to 34% of the theoretical value after 120 min of reaction. Analysis by liquid chromatography coupled to mass spectrometry showed the presence of products of hydroxylation on both piperazine and quinolonic rings generating fluorinated and defluorinated compounds as well as a product of the piperazine ring cleavage.
Resumo:
Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV
Resumo:
Technologies that increase crop yields are possible when providing profitability to the producer. The objective of this study was to evaluate production costs and profitability of maize in production systems in Cerrado. The study was conducted in Selviria (Mato Grosso do Sul State), Brazil, in the years 2009/10 and 2010/11. The experiment was arranged in randomized blocks with four replications in factorial and mixed with tracks. We established 36 treatments, three green manures (Pennisetum glaucum, Crotalaria juncea and intercropping Pennisetum glaucum + Crotalaria juncea), three soil management practices (no-tillage system, "heavy disking" + "levelling disking" and "chisel plow" + "levelling disking") and four doses of N (0, 60, 90 and 120 kg ha(-1)). For economic analysis were estimated operational cost, the gross revenue obtained by the product of the productivity of the treatments and the value of corn (R$ 0,417 kg or R$ 25,00 sc(-1)) and the ratio revenue / cost of treatment. Whereas higher values (revenue/cost > 1) and lower (revenue/cost ratio < 1) as a parameter in the analysis of profitability, it can be concluded that corn under no-tillage had the highest profitability in succession to Pennisetum glaucum growing profitability with increasing N rates, in succession to Crotalaria juncea and in the absence of nitrogen application on the coverage achieved higher profitability compared to other treatments and in succession to the consortium Pennisetum glaucum + Crotalaria juncea doses of N was between 50 and 55 kg ha(-1) offer greater profitability to the cultivation of corn.
Resumo:
Objective of this work by evaluating the effect of nitrogen on forage yield and morphogenesis of elephant grass cv. Pioneer. The experimental design was randomized blocks with five replications, totaling 20 experimental units. Treatments consisted of four nitrogen levels (100, 200, 300 and 400 kg ha(-1) yr(-1)). The experiment was conducted under irrigated conditions. Evaluative cuts were made at 50 cm soil with values of light interception (95%) without pre-defined intervals. It was observed that N fertilization increased significantly (P<0.05) the production of dry matter per hectare, leaf appearance rate (leaves days(-1)tiller(-1)), leaf elongation rate (cm tiller(-1) day(-1)) and stem elongation rate (cm day(-1)). The process of this forage senescence is accelerated with increasing doses of nitrogen and leaf appearance rate, thereby reducing the phyllochron. It required a study on the economic viability of higher doses of nitrogen in grazed elephant grass cv. Pioneer.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Prediction of genetic gains within breeding programs is not always compatible with those observed in practice. One reason for this inconsistency is the lack of knowledge of genotype-environment interaction (GxE). The aim of this study was to estimate genetic variation, evaluate the GxE, investigate the genetic correlation between pairs of environments and for the set, and to study the productivity, stability and adaptability at 2 years of age for diameter at breast height (DBH) in five progenies trials of Eucalyptus urophylla, used in a randomized complete block design, with the number of progenies ranging from 138 to 167, four to eight blocks and five to six plants per plot. Estimates of variance components and genetic parameters were obtained using the REML/BLUP method. For analysis of productivity, stability and adaptability, the HMRPGV method was used. The highest DBH growth was observed in Anhembi (10.52 cm) and Uberaba (10.20 cm). Estimates considered high were obtained for the coefficient of individual additive genetic variation (>13.3%) and average heritability among progenies (>0.40), indicating the possibility of obtaining genetic gains by selection among progenies. The coefficient of determination of the GxE was 1.7%, a fact that led to a high value of genotypic correlation between the performance of the progenies and environments (78.1%), indicating that the interaction is simple. The first six progenies showed a coincidence of 100% in the order of stability (HMGV), adaptability (RPGV) and productivity (HMRPGV), being 13% higher than the overall mean of five experiments (9.21 cm). When ordering the progenies, the selection of the 20 best in growth led to an increase in gain ranging of from 10.4 to 70%. Anhembi is the ideal place to have a breeding population which will be good in the other places as well.
Resumo:
The present work aims at analyzing how the adoption of a proactive environmental management via green operational practices (GOPs) correlates to the Green Performance (GrP) of a given set of ISO 9001-certified firms in Brazil. To this end, we elaborated a conceptual framework about environmental management, GOPs, and GrP Such theoretical foundation supported the development of empirical research through quantitative analysis. For the analysis, 75 questionnaires were collected from ISO 9001 certified companies. Data was analyzed by with statistical tools such as descriptive analysis, correlation analysis, and Structural Equation Modeling (SEM). The results demonstrate that the adoption of GOPs, in fact, exerts a positive impact on the GrP of the firms. This work contributes to a better understanding of green manufacturing in Brazil's industrial sector
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The study was conducted in two different locations in South Brazil, in tillage in the 2009/2010 season on eight sunflower hybrids, aiming to determine the path correlations and coefficients between primary and secondary characters on the main variable of achene productivity. The correlations were similar between environments. The characters of the head diameter and mass of a thousand achenes had a significant influence on sunflower productivity. Based on the magnitude of the direct and indirect effects, we highlighted all primary components on the main variable, beside the good determination coefficient and low residual effect. The secondary component, the number of achenes, despite the significant direct effect on productivity, was indirectly influenced by the primary components, making it an undesirable character for selection.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The search for predictions of species diversity across environmental gradients has challenged ecologists for decades. The humped-back model (HBM) suggests that plant diversity peaks at intermediate productivity; at low productivity few species can tolerate the environmental stresses, and at high productivity a few highly competitive species dominate. Over time the HBM has become increasingly controversial, and recent studies claim to have refuted it. Here, by using data from coordinated surveys conducted throughout grasslands worldwide and comprising a wide range of site productivities, we provide evidence in support of the HBM pattern at both global and regional extents. The relationships described here provide a foundation for further research into the local, landscape, and historical factors that maintain biodiversity.