Interface Fracture Property Of Peo Ceramic Coatings On Aluminum Alloy

This paper combines the four-point bending test, SEM and finite element method to study the interface fracture property of PEO coatings on aluminum alloy. The interface failure mode of the coating on the compression side is revealed. The ceramic coating crack firstly along the 45 degrees to the interface, then the micro crack in the coating deduces the interface crack. The plastic deformation observed by SEM shows excellent adhesion property between the coating and substrate. The plastic deformation in the substrate is due to the interfacial crack extension, so the interface crack mode of PEO coatings is ductile crack. The results of FEM show that the compression strength is about 600 MPa. (C) 2008 Elsevier B.V. All rights reserved.

In vitro activities of natural products against oral Candida isolates from denture wearers

Background: Candida-associated denture stomatitis is a frequent infectious disease. Treatment of this oral condition is difficult because failures and recurrences are common. The aim of this study was to test the in vitro antifungal activity of pure constituents of essentials oils. -- Methods: Eight terpenic derivatives (carvacrol, farnesol, geraniol, linalool, menthol, menthone, terpinen-4-ol, and aterpineol), a phenylpropanoid (eugenol), a phenethyl alcohol (tyrosol) and fluconazole were evaluated against 38 Candida isolated from denture-wearers and 10 collection Candida strains by the CLSI M27-A3 broth microdilution method. -- Results: Almost all the tested compounds showed antifungal activity with MIC ranges of 0.03-0.25% for eugenol and linalool, 0.03-0.12% for geraniol, 0.06-0.5% for menthol, a-terpineol and terpinen-4-ol, 0.03-0.5% for carvacrol, and 0.06-4% for menthone. These compounds, with the exception of farnesol, menthone and tyrosol, showed important in vitro activities against the fluconazole-resistant and susceptible-dose dependent Candida isolates. -- Conclusions: Carvacrol, eugenol, geraniol, linalool and terpinen-4-ol were very active in vitro against oral Candida isolates. Their fungistatic and fungicidal activities might convert them into promising alternatives for the topic treatment of oral candidiasis and denture stomatitis.

Impacts of inorganic turbidity on diquat efficacy against Egeria densa

In clear water, diquat [6,7-dihydrodipyrido (1,2-1a:2',1'-c) pyrazinediium dibromide] provides excellent submersed Plant control at low concentrations, such as <0.5 mg active ingredient (ai) L-1: however. turbid water conditions can interfere with the activity and effectiveness of this herbicide. Little work has been done to examine what ranges of turbidity caused by different Suspended sediment types affect diquat efficacy against a target species. A growth chamber study was conducted rising diquat against the submersed macrophyte -egeria (Egeria densa Planch.) under a range Of turbid conditions. Two materials were used to create turbid beater conditions: 100% bentonite clay for a "worst-case" scenario and a natural partial-clav (20% clay). Results indicated that a high rate of diquat (2 mg ai L-1) controlled egeria under relatively low levels of turbidity (5-10 NTU) using bentonite clay: however. higher levels (25 to 50 NTU) of turbidity essentially blocked effectiveness of diquat when applied at all rates tested (0.5. 1, 2 mg ai L-1). When using a natural partial-clay sediment, rates of 1 to 2 mg ai L-1 diquat provided good control of egeria in moderately turbid water (15 NTU). Additional evaluations rising different clay types would be useful to determine the effect of inorganic turbidity oil diquat efficacy.

Rights of Portugal, in reference to Great Britain and the question of the slave trade, or, the manifesto and protest of the weak, against the ingratitude, oppression, and violence of the strong ...

Enquanto os políticos e diplomatas polemizavam e agiam, Thomas Buxton publicava, depois de viajar ao Brasil e ao Caribe, o mais completo levantamento sobre o tráfico negreiro jamais feito até então.

Integration property of a wedge-elliptic cone waverider with scramjet engine

The hypersonic waverider forebody is designed in this paper. For the present waverider, the undersurface is carved out as a stream surface of a hypersonic inviscid flow field around wedge-elliptic cone, and the upper surface is assumed to be a freestream surface. A finite-volume code is used to generate the three-dimensional flow field. The leading edge is determined by satisfying the condition that the lip is situated at the intersection line of shocks.

Neuroprotective Effect of Melatonin: A Novel Therapy against Perinatal Hypoxia-Ischemia

17 p.

Against ambiguity

This paper argues that the widespread belief that ambiguity is beneficial in design communication stems from conceptual confusion. Communicating imprecise, uncertain and provisional ideas is a vital part of design teamwork, but what is uncertain and provisional needs to be expressed as clearly as possible. This paper argues that viewing design communication as conveying permitted spaces for further designing is a useful rationalisation for understanding what designers need from their notations and computer tools, to achieve clear communication of uncertain ideas. The paper presents a typology of ways that designs can be uncertain. It discusses how sketches and other representations of designs can be both intrinsically ambiguous, and ambiguous or misleading by failing to convey information about uncertainty and provisionality, with reference to knitwear design, where communication using inadequate representations causes severe problems. It concludes that systematic use of meta-notations for conveying provisionality and uncertainty can reduce these problems.

Experimental Research On Fatigue Property Of Steel Rubber Vibration Isolator For Offshore Jacket Platform In Cold Environment

Jacket platform is the most widely used offshore platform. Steel rubber vibration isolator and damping isolation system are often used to reduce or isolate the ice-induced and seismic-induced vibrations. The previous experimental and theoretical studies concern mostly with dynamic properties, vibration isolation schemes and vibration-reduction effectiveness analysis. In this paper, the experiments on steel rubber vibration isolator were carried out to investigate the compressive properties and fatigue properties in different low temperature conditions. The results may provide some guidelines for design of steel rubber vibration isolator for offshore platform in a cold environment, and for maintenance and replacement of steel rubber vibration isolator, and also for fatigue life assessment of the steel rubber vibration isolator. (C) 2009 Elsevier Ltd. All rights reserved.

If the tide is rising, who pays for the ark?

Two common goals of this meeting are to arrest the effects of sea level rise and other phenomena caused by Greenhouse Gases from anthropogenic sources ("GHG",) and to mitigate the effects. The fundamental questions are: (1) how to get there and (2) who should shoulder the cost? Given Washington gridlock, states, NGO's and citizens such as the Inupiat of the Village of Kivalina have turned to the courts for solutions. Current actions for public nuisance seek (1) to reduce and eventually eliminate GHG emissions, (2) damages for health effects and property damage—plus hundreds of millions in dollars spent to prepare for the foregoing. The U.S. Court of Appeals just upheld the action against the generators of some 10% of the CO2 emissions from human activities in the U.S., clearing the way for a trial featuring the state of the art scientific linkage between GHG production and the effects of global warming. Climate change impacts on coastal regions manifest most prominently through sea level rise and its impacts: beach erosion, loss of private and public structures, relocation costs, loss of use and accompanying revenues (e.g. tourism), beach replenishment and armoring costs, impacts of flooding during high water events, and loss of tax base. Other effects may include enhanced storm frequency and intensity, increased insurance risks and costs, impacts to water supplies, fires and biological changes through invasions or local extinctions (IPCC AR4, 2007; Okmyung, et al., 2007). There is an increasing urgency for federal and state governments to focus on the local and regional levels and consistently provide the information, tools, and methods necessary for adaptation. Calls for action at all levels acknowledge that a viable response must engage federal, state and local expertise, perspectives, and resources in a coordinated and collaborative effort. A workshop held in December 2000 on coastal inundation and sea level rise proposes a shared framework that can help guide where investments should be made to enable states and local governments to assess impacts and initiate adaptation strategies over the next decade. (PDF contains 5 pages)