Complete and interpretable conformance checking of business processes

This article presents a method for checking the conformance between an event log capturing the actual execution of a business process, and a model capturing its expected or normative execution. Given a business process model and an event log, the method returns a set of statements in natural language describing the behavior allowed by the process model but not observed in the log and vice versa. The method relies on a unified representation of process models and event logs based on a well-known model of concurrency, namely event structures. Specifically, the problem of conformance checking is approached by folding the input event log into an event structure, unfolding the process model into another event structure, and comparing the two event structures via an error-correcting synchronized product. Each behavioral difference detected in the synchronized product is then verbalized as a natural language statement. An empirical evaluation shows that the proposed method scales up to real-life datasets while producing more concise and higher-level difference descriptions than state-of-the-art conformance checking methods.

Associations with low rates of postpartum glucose screening after gestational diabetes among Indigenous and non-Indigenous Australian women

OBJECTIVES To explore factors associated with postpartum glucose screening among women with Gestational Diabetes Mellitus (GDM). METHODS A retrospective study using linked records from women with GDM who gave birth at Cairns Hospital in Far North Queensland, Australia, from 1 January 2004 to 31 December 2010. RESULTS The rates of postpartum Oral Glucose Tolerance Test (OGTT) screening, while having increased significantly among both Indigenous* and non-Indigenous women from 2004 to 2010 (HR 1.15 per year, 95%CI 1.08-1.22, p<0.0001), remain low, particularly among Indigenous women (10% versus 27%, respectively at six months postpartum). Indigenous women in Cairns had a longer time to postpartum OGTT than Indigenous women in remote areas (HR 0.58, 0.38-0.71, p=0.01). Non-Indigenous women had a longer time to postpartum OGTT if they: were born in Australia (HR 0.76, 0.59-1.00, 0.05); were aged <25 years (HR 0.45, 0.23-0.89, p=0.02); had parity >5 (HR 0.33, 0.12-0.90, p=0.03); smoked (HR 0.48, 0.31-0.76, p=0.001); and did not breastfeed (HR 0.09, 0.01-0.64, p=0.02). CONCLUSIONS Postpartum diabetes screening rates following GDM in Far North Queensland are low, particularly among Indigenous women, with lower rates seen in the regional centre; and among non-Indigenous women with indicators of low socioeconomic status. IMPLICATIONS Strategies are urgently needed to improve postpartum diabetes screening after GDM that reach women most at risk.

A novel species of mastrevirus (family Geminiviridae) isolated from Digitaria didactyla grass from Australia.

Mastreviruses (family Geminiviridae) that infect monocotyledonous plants occur throughout the temperate and tropical regions of Asia, Africa, Europe and Australia. Despite the identification of a very diverse array of mastrevirus species whose members infect African monocots, few such species have been discovered in other parts of the world. For example, the sequence of only a single monocot-infecting mastrevirus, Chloris striate mosaic virus (CSMV), has been reported so far from Australia, even though earlier biological and serological studies suggested that other distinct mastreviruses were present. Here, we have obtained the complete nucleotide sequence of a virus from the grass Digitaria didactyla originating from Australia. Analysis of the sequence shows the virus to be a typical mastrevirus, with four open reading frames, two in each orientation, separated by two non-coding intergenic regions. Although it showed the highest levels of sequence identity to CSMV (68.7%), their sequences are sufficiently diverse for the virus to be considered a member of a new species in the genus Mastrevirus, based on the present species demarcation criteria. We propose that the name first used during the 1980s be used for this species, Digitaria didactyla striate mosaic virus (DDSMV).

Non-destructive prediction of 'Hass' avocado dry matter via FT-NIR spectroscopy.

BACKGROUND: The inability to consistently guarantee internal quality of horticulture produce is of major importance to the primary producer, marketers and ultimately the consumer. Currently, commercial avocado maturity estimation is based on the destructive assessment of percentage dry matter (%DM), and sometimes percentage oil, both of which are highly correlated with maturity. In this study the utility of Fourier transform (FT) near-infrared spectroscopy (NIRS) was investigated for the first time as a non-invasive technique for estimating %DM of whole intact 'Hass' avocado fruit. Partial least squares regression models were developed from the diffuse reflectance spectra to predict %DM, taking into account effects of intra-seasonal variation and orchard conditions. RESULTS: It was found that combining three harvests (early, mid and late) from a single farm in the major production district of central Queensland yielded a predictive model for %DM with a coefficient of determination for the validation set of 0.76 and a root mean square error of prediction of 1.53% for DM in the range 19.4-34.2%. CONCLUSION: The results of the study indicate the potential of FT-NIRS in diffuse reflectance mode to non-invasively predict %DM of whole 'Hass' avocado fruit. When the FT-NIRS system was assessed on whole avocados, the results compared favourably against data from other NIRS systems identified in the literature that have been used in research applications on avocados.

A proposal to change existing virus species names to non-Latinized binomials.

A proposal has been posted on the ICTV website (2011.001aG.N.v1.binomial_sp_names) to replace virus species names by non-Latinized binomial names consisting of the current italicized species name with the terminal word "virus" replaced by the italicized and non-capitalized genus name to which the species belongs. If implemented, the current italicized species name Measles virus, for instance, would become Measles morbillivirus while the current virus name measles virus and its abbreviation MeV would remain unchanged. The rationale for the proposed change is presented.

Principles to guide sustainable implementation of extended-scope-of-practice physiotherapy workforce redesign initiatives in Australia: Stakeholder perspectives, barriers, supports, and incentives

Sustainable implementation of new workforce redesign initiatives requires strategies that minimize barriers and optimize supports. Such strategies could be provided by a set of guiding principles. A broad understanding of the concerns of all the key stakeholder groups is required before effective strategies and initiatives are developed. Many new workforce redesign initiatives are not underpinned by prior planning, and this threatens their uptake and sustainability. This study reports on a cross-sectional qualitative study that sought the perspectives of representatives of key stakeholders in a new workforce redesign initiative (extended-scope-of-practice physiotherapy) in one Australian tertiary hospital. The key stakeholder groups were those that had been involved in some way in the development, management, training, funding, and/or delivery of the initiative. Data were collected using semistructured questions, answered individually by interview or in writing. Responses were themed collaboratively, using descriptive analysis. Key identified themes comprised: the importance of service marketing; proactively addressing barriers; using readily understood nomenclature; demonstrating service quality and safety, monitoring adverse events, measuring health and cost outcomes; legislative issues; registration; promoting viable career pathways; developing, accrediting, and delivering a curriculum supporting physiotherapists to work outside of the usual scope; and progression from "a good idea" to established service. Health care facilities planning to implement new workforce initiatives that extend scope of usual practice should consider these issues before instigating workforce/model of care changes. © 2014 Morris et al.

Dynamic Bayesian network inferencing for non-homogeneous complex systems

Dynamic Bayesian Networks (DBNs) provide a versatile platform for predicting and analysing the behaviour of complex systems. As such, they are well suited to the prediction of complex ecosystem population trajectories under anthropogenic disturbances such as the dredging of marine seagrass ecosystems. However, DBNs assume a homogeneous Markov chain whereas a key characteristics of complex ecosystems is the presence of feedback loops, path dependencies and regime changes whereby the behaviour of the system can vary based on past states. This paper develops a method based on the small world structure of complex systems networks to modularise a non-homogeneous DBN and enable the computation of posterior marginal probabilities given evidence in forwards inference. It also provides an approach for an approximate solution for backwards inference as convergence is not guaranteed for a path dependent system. When applied to the seagrass dredging problem, the incorporation of path dependency can implement conditional absorption and allows release from the zero state in line with environmental and ecological observations. As dredging has a marked global impact on seagrass and other marine ecosystems of high environmental and economic value, using such a complex systems model to develop practical ways to meet the needs of conservation and industry through enhancing resistance and/or recovery is of paramount importance.

Near infrared spectroscopy as a rapid non-invasive tool for agricultural and industrial process management with special reference to avocado and sandalwood industries

Near infrared spectroscopy (NIRS) can play a vital role as a cost effective, rapid, non-invasive, reproducible diagnostic tool for many environmental management, agricultural and industrial waste water monitoring applications. In this paper we highlight the ability of NIRS technology to be used as a diagnostic tool in agricultural and environmental applications through the successful assessment of Fourier Transform NIRS to predict α santalol in sandalwood chip samples, and maturity of ‘Hass’ avocado fruit based on dry matter content. Presented at the Third International Conference on Challenges in Environmental Science & Engineering, CESE-2010. 26 September – 1 October 2010, The Sebel, Cairns, Queensland, Australia.

Shift in disease burden from communicable to non-communicable diseases: Aiming to achieve Universal Health Coverage in Nepal

A major barrier to accessing healthcare services is spending, and the extended time that non-communicable diseases require treatment for means that many people around the world do not have proper access to care. Saval Khanal from Sankalpa Foundation, Nepal, Lennert Veerman and Samantha Hollingworth from the University of Queensland and Lisa Nissen from Queensland University of Technology lay out the results of their study and establish a method to forecast medicine use in Nepal.

Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

Parasites as indicators of movement and population connectivity of a non-diadromous, tropical estuarine teleost: king threadfin Polydactylus macrochir

Temporal and spatial patterns in parasite assemblages were examined to evaluate the degree of movement and connectivity of post-recruitment life-history stages of a large, non-diadromous tropical estuarine teleost, king threadfin Polydactylus macrochir, collected from 18 locations across northern Australia. Ten parasites types (juvenile stages of two nematodes and seven cestodes, and adults of an acanthocephalan) were deemed to be suitable for use as biological tags, in that they were considered to have a long residence time in the fish, were relatively easy to find and were morphologically very different to each other which aided discrimination. Univariate and discriminant function analysis of these parasites revealed little difference in temporal replicates collected from five locations, suggesting that the parasite communities were stable over the timeframes explored. Univariate, discriminant function, and BrayCurtis similarity analyses indicated significant spatial heterogeneity, with BrayCurtis classification accuracies ranging from 55 to 100% for locations in north-western and northern Australia, 24 to 88% in the Gulf of Carpentaria, and 39 to 88% on the east coast of Queensland. Few differences were observed among locations separated by <200 km. The observed patterns of parasite infection are in agreement with concurrent studies of movement and connectivity of P. macrochir in that they indicate a complex population structure across northern Australia. These results should be considered when reviewing the management arrangements for this species.

Breakage of viscous and non-Newtonian drops in stirred dispersions

A model of breakage of drops in a stirred vessel has been proposed to account for the effect of rheology of the dispersed phase. The deformation of the drop is represented by a Voigt element. A realistic description of the role of interfacial tension is incorporated by treating it as a restoring force which passes through a maximum as the drop deforms and eventually reaching a zero value at the break point. It is considered that the drop will break when the strain of the drop has reached a value equal to its diameter. An expression for maximum stable drop diameter, dmax, is derived from the model and found to be applicable over a wide range of variables, as well as to data already existing in literature. The model could be naturally extended to predict observed values of dmax when the dispersed phase is a power law fluid or a Bingham plastic.

Impact of low temperature storage on active and storage forms of folate in choy sum (Brassica rapa subsp parachinensis)

Choy sum (Brassica rapa subsp. parachinensis) is a dark green leafy vegetable that contains high folate (vitamin B9) levels comparable to spinach. Folate is essential for the maintenance of human health and is obtained solely through dietary means. Analysis of the edible portion of choy sum by both microbiological assay and LC-MS/MS indicated that total folate activity remained significantly unchanged over 3 weeks storage at 4 degrees C. Inedible fractions consisted primarily of outer leaves, which showed signs of rotting after 14d, and a combination of rotting and yellowing after 21 d, contributing to 20% and 40% of product removal, respectively. Following deconjugation of the folate present in choy sum to monoglutamate and diglutamate derivatives, the principal forms (vitamers) of folate detected in choy sum were 5-methyltetrahydrofolate and 5-formyl tetrahydrofolate, followed by tetrahydrofolate (THF), 5,10-methenyl-THF, and 10-formyl folic acid. During storage, a significant decline in 5-formyl-THF was observed, with a slight but not significant increase in the combined 5-methyl-THF derivatives. The decline in 5-formyl-THF in relation to the other folate vitamers present may indicate that 5-formyl-THF is being utilised as a folate storage reserve, being interconverted to more metabolically active forms of folate, such as 5-methyl-THF. Although folate vitamer profile changed over the storage period, total folate activity did not significantly change. From a human nutritional perspective this is important, as while particular folate vitamers (e.g. 5-methyl-THF) are necessary for maintaining vital aspects of plant metabolism, it is less important to the human diet, as humans can absorb and interconvert multiple forms of folate. The current trial indicates that it is possible to store choy sum for up to 3 weeks at 4 degrees C without significantly affecting total folate concentration of the edible portion. Crown Copyright (C) 2012 Published by Elsevier B.V. All rights reserved.

Stunted cotton (Gossypium hirsutum L.) fully recovers biomass and yield of seed cotton after delayed root inoculation with spores of an arbuscular mycorrhizal fungus (Glomus mosseae)

In the northern grain and cotton region of Australia, poor crop growth after long periods of fallow, called 'long-fallow' disorder, is caused by a decline of natural arbuscular-mycorrhizal fungi (AMF). When cotton was grown in large pots containing 22 kg of Vertisol from a field recently harvested from cotton in Central Queensland, plants in pasteurised soil were extremely stunted compared with plants in unpasteurised soil. We tested the hypothesis that this extreme stunting was caused by the absence of AMF and examined whether such stunted plants could recover from subsequent treatment with AMF spores and/or P fertiliser. At 42 days after sowing, the healthy cotton growing in unpasteurised soil had 48% of its root-length colonised with AMF, whereas the stunted cotton had none. After inoculation with AMF spores (6 spores/g soil of Glomus mosseae) and/or application of P fertiliser (50 mg P/kg soil) at 45 days after sowing, the stunted plants commenced to improve about 25 days after treatment, and continued until their total dry matter and seed cotton production equalled that of plants growing in unpasteurised soil with natural AMF. In contrast, non-mycorrhizal cotton grown without P fertiliser remained stunted throughout and produced no bolls and only 1% of the biomass of mycorrhizal cotton. Even with the addition of P fertiliser, non-mycorrhizal cotton produced only 64% of the biomass and 58% of the seed cotton (lint + seed) of mycorrhizal cotton plants. These results show that cotton is highly dependent on AMF for P nutrition and growth in Vertisol (even with high rates of P fertiliser), but can recover from complete lack of AMF and consequent stunting during at least the first 45 days of growth when treated with AMF spores and/or P fertiliser. This corroborates field observations in the northern region that cotton may recover from long-fallow disorder caused by low initial levels of AMF propagules in the soil as the AMF colonisation of its roots increases during the growing season.