A new evolutionary clustering search for a no-wait flow shop problem with set-up times

This paper addresses the m-machine no-wait flow shop problem where the set-up time of a job is separated from its processing time. The performance measure considered is the total flowtime. A new hybrid metaheuristic Genetic Algorithm-Cluster Search is proposed to solve the scheduling problem. The performance of the proposed method is evaluated and the results are compared with the best method reported in the literature. Experimental tests show superiority of the new method for the test problems set, regarding the solution quality. (c) 2012 Elsevier Ltd. All rights reserved.

New mutations in the GLA gene in Brazilian families with Fabry disease

Fabry disease (FD) is an X-linked inborn error of glycosphingolipid catabolism that results from mutations in the alpha-galactosidase A (GLA) gene. Evaluating the enzymatic activity in male individuals usually performs the diagnosis of the disease, but in female carriers the diagnosis based only on enzyme assays is often inconclusive. In this work, we analyzed 568 individuals from 102 families with suspect of FD. Overall, 51 families presented 38 alterations in the GLA gene, among which 19 were not previously reported in literature. The alterations included 17 missense mutations, 7 nonsense mutations, 7 deletions, 6 insertions and 1 in the splice site. Six alterations (R112C, R118C, R220X, R227X, R342Q and R356W) occurred at CpG dinucleotides. Five mutations not previously described in the literature (A156D, K237X, A292V, I317S, c.1177_1178insG) were correlated with low GLA enzyme activity and with prediction of molecular damages. From the 13 deletions and insertions, 7 occurred in exons 6 or 7 (54%) and 11 led to the formation of a stop codon. The present study highlights the detection of new genomic alterations in the GLA gene in the Brazilian population, facilitating the selection of patients for recombinant enzyme-replacement trials and offering the possibility to perform prenatal diagnosis. Journal of Human Genetics (2012) 57, 347-351; doi:10.1038/jhg.2012.32; published online 3 May 2012

Design and synthesis of new (E)-cinnamic N-acylhydrazones as potent antitrypanosomal agents

We report herein the synthesis and trypanocidal profile of new (E)-cinnamic N-acylhydrazones (NAHs) designed by exploiting molecular hybridization between the potent cruzain inhibitors (E)-1-(benzo[d] 11,3)dioxol-5-yl)-3-(4-bromophenyl)prop-2-en-1-one and (E)-3-hydroxy-N'-((2-hydroxynaphthalen-1-yl)methylene)-7-methoxy-2-naphthohydrazide. These derivatives were evaluated against both amastigote and trypomastigote forms of Trypanosoma cruzi and lead us to identify two compounds that were approximately two times more active than the reference drug, benznidazole, and with good cytotoxic index. Although designed as cruzain inhibitors, the weak potency displayed by the best cinnamyl NAH derivatives indicated that another mechanism of action was likely responsible for their trypanocide action. (C) 2012 Elsevier Masson SAS. All rights reserved.

Iheringichthys syi (Siluriformes: Pimelodidae), a new pimelodid species from upper Paraná basin, Brazil

We describe a new species of pimelodid catfish of the genus Iheringichthys from the upper Paraná basin, Brazil. Iheringichthys syi n. sp. is distinguished by the comparatively fine serration along the anterior margin of the pectoral-fin spine, an adpressed dorsal-fin remote from the adipose-fin origin, a large eye (23.2-31.2% of head length), narrow interorbital (16.2-23.0% of head length), long snout (42.0-51.0% of head length), long postorbital length (30.6-34.0% of head length), low adipose fin (4.8-7.8% of standard length), eye diameter 97.0-140.0% of interorbital length, and body with numerous, small dots irregularly scattered on flanks, especially marked on anterior half of flank.

Endothelial function in pre-pubertal children at risk of developing cardiomyopathy: a new frontier

Although it is known that obesity, diabetes, and Kawasaki's disease play important roles in systemic inflammation and in the development of both endothelial dysfunction and cardiomyopathy, there is a lack of data regarding the endothelial function of pre-pubertal children suffering from cardiomyopathy. In this study, we performed a systematic review of the literature on pre-pubertal children at risk of developing cardiomyopathy to assess the endothelial function of pre-pubertal children at risk of developing cardiomyopathy. We searched the published literature indexed in PubMed, Bireme and SciELO using the keywords 'endothelial', 'children', 'pediatric' and 'infant' and then compiled a systematic review. The end points were age, the pubertal stage, sex differences, the method used for the endothelial evaluation and the endothelial values themselves. No studies on children with cardiomyopathy were found. Only 11 papers were selected for our complete analysis, where these included reports on the flow-mediated percentage dilatation, the values of which were 9.80±1.80, 5.90±1.29, 4.50±0.70, and 7.10±1.27 for healthy, obese, diabetic and pre-pubertal children with Kawasaki's disease, respectively. There was no significant difference in the dilatation, independent of the endothelium, either among the groups or between the genders for both of the measurements in children; similar results have been found in adolescents and adults. The endothelial function in cardiomyopathic children remains unclear because of the lack of data; nevertheless, the known dysfunctions in children with obesity, type 1 diabetes and Kawasaki's disease may influence the severity of the cardiovascular symptoms, the prognosis, and the mortality rate. The results of this study encourage future research into the consequences of endothelial dysfunction in pre-pubertal children.

A new method to evaluate glenoid erosion in instable shoulder

Background: We aimed to establish values and parameters using multislice reconstruction in axial computerized tomography (CT) in order to quantify the erosion of the glenoid cavity in cases of shoulder instability. Methods: We studied two groups using CT. Group I had normal subjects and Group II had patients with shoulder instability. We measured values of the vertical segment, the superior horizontal, medial and inferior segments, and also calculated the ratio of the horizontal superior and inferior segments of the glenoid cavity in both normal subjects and those with shoulder instability. These variables were recorded during arthroscopy for cases with shoulder instability. Results The mean values were 40.87 mm, 17.86 mm, 26.50 mm, 22.86 mm and 0.79 for vertical segment, the superior horizontal, medial and inferior segments, and the ratio between horizontal superior and inferior segments of the glenoid cavity respectively, in normal subjects. For subjects with unstable shoulders the mean values were 37.33 mm, 20.83 mm, 23.07 mm and 0.91 respectively. Arthroscopic measurements yielded an inferior segment value of 24.48 mm with a loss of 2.39 mm (17.57%). The ratio between the superior and inferior segments of the glenoid cavity was 0.79. This value can be used as a normative value for evaluating degree of erosion of the anterior border of the glenoid cavity. However, values found using CT should not be used on a comparative basis with values found during arthroscopy. Conclusions: Computerized tomographic measurements of the glenoid cavity yielded reliable values consistent with those in the literature.

Comparison of physical properties of two exogenous surfactants: new parameter.

The pulmonary surfactant has essential physical properties for normal lung function. The most important property is the surface tension. In this work, it was evaluated the surface tension of two commercial exogenous surfactants used in surfactant replacement therapy, poractant alfa (Curosurf, Chiesi Farmaceuticals, Italy) and beractant (Survanta, Abbott Laboratories, USA) using new parameters. A Langmuir film balance (Minitrough, KSV Instruments, Finland) was used to measure surface tension of poractant alfa and beractant samples. For both samples, we prepared a solution of 1 mg/m dissolved in chloroform (100π`), which was applied over a subphase of milli-Q water (175 ml) in the chamber of the balance. The chamber has two moving barriers that can change its surface area between a maximal value of 112.5 cm 2 , and a minimal value of 22.5 cm 2, defining a balance cycle. Each surfactant had its surface tension evaluated during 20 balance cycles for three times. Four quantities were calculated from the experiment: Minimum Surface Tension (MTS), defined as the surface tension at minimal surface area during the first cycle; Mean Work Cycle (MWC), defined as the mean hysteresis area of the measured surface tension curve of the last 16 balance cycles; Critical Active Surface Area in Compression (CASAC) or in Expansion (CASAE), defined as the maximal chamber area where the surfactant is active on the surface in compression or expansion. The t-test was applied to verify for statistical significance of the results. Comproved with the MST is the same reported in literature, the differences between MWC, CASAC, and CASAE were statistically significant (p<0.001). The MWC, CASAC and CASAE were higher for poractant alfa than for beractant. A higher MWC for poractant alfa means higher elastic recoil of the lung in comparison with beractant. Using a different methodology, our results showed that poractant alfa is probably more effective in a surfactant replacement therapy than beractant due the use of poractant alfa in relation to the use of beractant in preterm infants with Respiratory Distress Syndrome (RDS).

Cradoscrupocellaria, a new bryozoan genus for Scrupocellaria bertholletii (Audouin) and related species (Cheilostomata, Candidae): taxonomy, biodiversity and distribution

A new genus, Cradoscrupocellaria n. gen., is erected for Scrupocellaria bertholletii Audouin, 1826), reported as widespread in tropical and subtropical waters. Here we select a neotype of this species in order to establish its identity and distinguish it from morphologically similar species. We include redescriptions and figures of additional species now assigned to this new genus: Cradoscrupocellaria curacaoensis (Fransen, 1986) n. comb., Cradoscrupocellaria hirsuta (Jullien & Calvet, 1903) n. comb., and Cradoscrupocellaria macrorhyncha (Gautier, 1962) n. comb. Five additional species are assigned to the genus: Cradoscrupocellaria ellisi (Vieira & Spencer Jones, 2012) n. comb., Cradoscrupocellaria nanshaensis (Liu, 1991) n. comb., Cradoscrupocellaria reptans (Linnaeus, 1758) n. comb., Cradoscrupocellaria serrata (Waters, 1909) n. comb., and Cradoscrupocellaria tenuirostris (Osburn, 1950) n. comb. Eighteen new species are described: Cradoscrupocellaria aegyptiana n. sp., Cradoscrupocellaria arisaigensis n. sp., Cradoscrupocellaria atlantica n. sp., Cradoscrupocellaria calypso n. sp., Cradoscrupocellaria floridana n. sp., Cradoscrupocellaria galapagensis n. sp., Cradoscrupocellaria gautieri n. sp., Cradoscrupocellaria gorgonensis n. sp., Cradoscrupocellaria hastingsae n. sp., Cradoscrupocellaria insularis n. sp., Cradoscrupocellaria jamaicensis n. sp., Cradoscrupocellaria lagaaiji n. sp., Cradoscrupocellaria macrorhynchoides n. sp., Cradoscrupocellaria makua n. sp., Cradoscrupocellaria marcusorum n. sp., Cradoscrupocellaria normani n. sp., Cradoscrupocellaria odonoghuei n. sp., and Cradoscrupocellaria osburni n. sp.

France, Germany and the United Kingdom Cooperation in Times of Turbulence

This thesis deals with cooperation between France, Germany and the United Kingdom within the area of foreign and security policy. Two case studies are presented, one of them concerning cooperation between the three states within and outside institutions in 1980 following the Soviet invasion of Afghanistan, and the other dealing with cooperation concerning the crisis in Macedonia in 2001. In accordance with the approach of neoliberal institutionalism the primary hypothesis is that cooperation is primarily determined by the interests of states but it is also limited by norms and affected by the institutions of which the three states are members. The study describes the large variety of forms of cooperation that exist between France, Germany and the United Kingdom, in which the United States also plays an important part, and which also includes their cooperation within a number of international institutions. The study also points to the new forms of interaction between states and institutions that have come about since the Cold War ended, and which give a stronger role to institutions and the cooperation between them. Still, however, states retain a decisive role in cooperation within the field of foreign and security policy.

New materials for electrochemiluminescence

The study of electrochemiluminescence (ECL) involves photophysical and electrochemical aspects. Excited states are populated by an electrical stimulus. The most important applications are in the diagnostic field where a number of different biologically-relevant molecules (e.g. proteins and nucleic acids) can be recognized and quantified with a sensitivity and specificity previously not reachable. As a matter of fact the electrochemistry, differently to the classic techniques as fluorescence and chemiluminescence, allows to control the excited state generation spatially and temporally. The two research visits into A. J. Bard electrochemistry laboratories were priceless. Dr. Bard has been one of ECL pioneers, the first to introduce the technique and the one who discovered in 1972 the surprising emission of Ru(bpy)3 2+. I consider necessary to thank by now my supervisors Massimo and Francesco for their help and for giving me the great opportunity to know this unique science man that made me feel enthusiastic. I will never be grateful enough… Considering that the experimental techniques of ECL did not changed significantly in these last years the most convenient research direction has been the developing of materials with new or improved properties. In Chapter I the basics concepts and mechanisms of ECL are introduced so that the successive experiments can be easily understood. In the final paragraph the scopes of the thesis are briefly described. In Chapter II by starting from ECL experimental apparatus of Dr. Bard’s laboratories the design, assembly and preliminary tests of the new Bologna instrument are carefully described. The instrument assembly required to work hard but resulted in the introduction of the new technique in our labs by allowing the continuation of the ECL studies began in Texas. In Chapter III are described the results of electrochemical and ECL studies performed on new synthesized Ru(II) complexes containing tetrazolate based ligands. ECL emission has been investigated in solution and in solid thin films. The effect of the chemical protonation of the tetrazolate ring on ECL emission has been also investigated evidencing the possibility of a catalytic effect (generation of molecular hydrogen) of one of the complexes in organic media. Finally, after a series of preliminary studies on ECL emission in acqueous buffers, the direct interaction with calf thymus DNA of some complexes has been tested by ECL and photoluminescence (PL) titration. In Chapter IV different Ir(III) complexes have been characterized electrochemically and photophysically (ECL and PL). Some complexes were already well-known in literature for their high quantum efficiency whereas the remaining were new synthesized compounds containing tetrazolate based ligands analogous to those investigated in Chapt. III. During the tests on a halogenated complex was unexpectedly evidenced the possibility to follow the kinetics of an electro-induced chemical reaction by using ECL signal. In the last chapter (V) the possibility to use mono-use silicon chips electrodes as ECL analitycal devices is under investigation. The chapter begins by describing the chip structure and materials then a signal reproducibility study and geometry optimization is carried on by using two different complexes. In the following paragraphs is reported in detail the synthesis of an ECL label based on Ru(bpy)3 2+ and the chip functionalization by using a lipoic acid SAM and the same label. After some preliminary characterizations (mass spectroscopy TOF) has been demonstrated that by mean of a simple and fast ECL measurement it’s possible to confirm the presence of the coupling product SAM-label into the chip with a very high sensitivity. No signal was detected from the same system by using photoluminescence.

Essays on the political economy of European integration

Recently, a rising interest in political and economic integration/disintegration issues has been developed in the political economy field. This growing strand of literature partly draws on traditional issues of fiscal federalism and optimum public good provision and focuses on a trade-off between the benefits of centralization, arising from economies of scale or externalities, and the costs of harmonizing policies as a consequence of the increased heterogeneity of individual preferences in an international union or in a country composed of at least two regions. This thesis stems from this strand of literature and aims to shed some light on two highly relevant aspects of the political economy of European integration. The first concerns the role of public opinion in the integration process; more precisely, how economic benefits and costs of integration shape citizens' support for European Union (EU) membership. The second is the allocation of policy competences among different levels of government: European, national and regional. Chapter 1 introduces the topics developed in this thesis by reviewing the main recent theoretical developments in the political economy analysis of integration processes. It is structured as follows. First, it briefly surveys a few relevant articles on economic theories of integration and disintegration processes (Alesina and Spolaore 1997, Bolton and Roland 1997, Alesina et al. 2000, Casella and Feinstein 2002) and discusses their relevance for the study of the impact of economic benefits and costs on public opinion attitude towards the EU. Subsequently, it explores the links existing between such political economy literature and theories of fiscal federalism, especially with regard to normative considerations concerning the optimal allocation of competences in a union. Chapter 2 firstly proposes a model of citizens’ support for membership of international unions, with explicit reference to the EU; subsequently it tests the model on a panel of EU countries. What are the factors that influence public opinion support for the European Union (EU)? In international relations theory, the idea that citizens' support for the EU depends on material benefits deriving from integration, i.e. whether European integration makes individuals economically better off (utilitarian support), has been common since the 1970s, but has never been the subject of a formal treatment (Hix 2005). A small number of studies in the 1990s have investigated econometrically the link between national economic performance and mass support for European integration (Eichenberg and Dalton 1993; Anderson and Kalthenthaler 1996), but only making informal assumptions. The main aim of Chapter 2 is thus to propose and test our model with a view to providing a more complete and theoretically grounded picture of public support for the EU. Following theories of utilitarian support, we assume that citizens are in favour of membership if they receive economic benefits from it. To develop this idea, we propose a simple political economic model drawing on the recent economic literature on integration and disintegration processes. The basic element is the existence of a trade-off between the benefits of centralisation and the costs of harmonising policies in presence of heterogeneous preferences among countries. The approach we follow is that of the recent literature on the political economy of international unions and the unification or break-up of nations (Bolton and Roland 1997, Alesina and Wacziarg 1999, Alesina et al. 2001, 2005a, to mention only the relevant). The general perspective is that unification provides returns to scale in the provision of public goods, but reduces each member state’s ability to determine its most favoured bundle of public goods. In the simple model presented in Chapter 2, support for membership of the union is increasing in the union’s average income and in the loss of efficiency stemming from being outside the union, and decreasing in a country’s average income, while increasing heterogeneity of preferences among countries points to a reduced scope of the union. Afterwards we empirically test the model with data on the EU; more precisely, we perform an econometric analysis employing a panel of member countries over time. The second part of Chapter 2 thus tries to answer the following question: does public opinion support for the EU really depend on economic factors? The findings are broadly consistent with our theoretical expectations: the conditions of the national economy, differences in income among member states and heterogeneity of preferences shape citizens’ attitude towards their country’s membership of the EU. Consequently, this analysis offers some interesting policy implications for the present debate about ratification of the European Constitution and, more generally, about how the EU could act in order to gain more support from the European public. Citizens in many member states are called to express their opinion in national referenda, which may well end up in rejection of the Constitution, as recently happened in France and the Netherlands, triggering a European-wide political crisis. These events show that nowadays understanding public attitude towards the EU is not only of academic interest, but has a strong relevance for policy-making too. Chapter 3 empirically investigates the link between European integration and regional autonomy in Italy. Over the last few decades, the double tendency towards supranationalism and regional autonomy, which has characterised some European States, has taken a very interesting form in this country, because Italy, besides being one of the founding members of the EU, also implemented a process of decentralisation during the 1970s, further strengthened by a constitutional reform in 2001. Moreover, the issue of the allocation of competences among the EU, the Member States and the regions is now especially topical. The process leading to the drafting of European Constitution (even if then it has not come into force) has attracted much attention from a constitutional political economy perspective both on a normative and positive point of view (Breuss and Eller 2004, Mueller 2005). The Italian parliament has recently passed a new thorough constitutional reform, still to be approved by citizens in a referendum, which includes, among other things, the so called “devolution”, i.e. granting the regions exclusive competence in public health care, education and local police. Following and extending the methodology proposed in a recent influential article by Alesina et al. (2005b), which only concentrated on the EU activity (treaties, legislation, and European Court of Justice’s rulings), we develop a set of quantitative indicators measuring the intensity of the legislative activity of the Italian State, the EU and the Italian regions from 1973 to 2005 in a large number of policy categories. By doing so, we seek to answer the following broad questions. Are European and regional legislations substitutes for state laws? To what extent are the competences attributed by the European treaties or the Italian Constitution actually exerted in the various policy areas? Is their exertion consistent with the normative recommendations from the economic literature about their optimum allocation among different levels of government? The main results show that, first, there seems to be a certain substitutability between EU and national legislations (even if not a very strong one), but not between regional and national ones. Second, the EU concentrates its legislative activity mainly in international trade and agriculture, whilst social policy is where the regions and the State (which is also the main actor in foreign policy) are more active. Third, at least two levels of government (in some cases all of them) are significantly involved in the legislative activity in many sectors, even where the rationale for that is, at best, very questionable, indicating that they actually share a larger number of policy tasks than that suggested by the economic theory. It appears therefore that an excessive number of competences are actually shared among different levels of government. From an economic perspective, it may well be recommended that some competences be shared, but only when the balance between scale or spillover effects and heterogeneity of preferences suggests so. When, on the contrary, too many levels of government are involved in a certain policy area, the distinction between their different responsibilities easily becomes unnecessarily blurred. This may not only leads to a slower and inefficient policy-making process, but also risks to make it too complicate to understand for citizens, who, on the contrary, should be able to know who is really responsible for a certain policy when they vote in national,local or European elections or in referenda on national or European constitutional issues.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Multiproperty correlation of experimental data of the binaries propyl ethanoate+alkanes (pentane to decane). New experimental information for vapor-liquid equilibrium and mixing properties

[EN]A thermodynamic study is carried out on binary systems composed of propyl ethanoate with six alkanes, from pentane to decane. Vapor pressures of the ester and the isobaric vapor−liquid equilibria of these six mixtures were measured at 101.32 kPa in a small-capacity ebulliometer and also the mixing properties yE = vE,hE over a range of temperatures and at atmospheric pressure. Adequate correlations are drawn for the surfaces yE = yE(x,T) with an interpretation on the behavior of the mixtures and also using cp E data from literature.

New approaches to open problems in gene expression microarray data

In the past decade, the advent of efficient genome sequencing tools and high-throughput experimental biotechnology has lead to enormous progress in the life science. Among the most important innovations is the microarray tecnology. It allows to quantify the expression for thousands of genes simultaneously by measurin the hybridization from a tissue of interest to probes on a small glass or plastic slide. The characteristics of these data include a fair amount of random noise, a predictor dimension in the thousand, and a sample noise in the dozens. One of the most exciting areas to which microarray technology has been applied is the challenge of deciphering complex disease such as cancer. In these studies, samples are taken from two or more groups of individuals with heterogeneous phenotypes, pathologies, or clinical outcomes. these samples are hybridized to microarrays in an effort to find a small number of genes which are strongly correlated with the group of individuals. Eventhough today methods to analyse the data are welle developed and close to reach a standard organization (through the effort of preposed International project like Microarray Gene Expression Data -MGED- Society [1]) it is not unfrequant to stumble in a clinician's question that do not have a compelling statistical method that could permit to answer it.The contribution of this dissertation in deciphering disease regards the development of new approaches aiming at handle open problems posed by clinicians in handle specific experimental designs. In Chapter 1 starting from a biological necessary introduction, we revise the microarray tecnologies and all the important steps that involve an experiment from the production of the array, to the quality controls ending with preprocessing steps that will be used into the data analysis in the rest of the dissertation. While in Chapter 2 a critical review of standard analysis methods are provided stressing most of problems that In Chapter 3 is introduced a method to adress the issue of unbalanced design of miacroarray experiments. In microarray experiments, experimental design is a crucial starting-point for obtaining reasonable results. In a two-class problem, an equal or similar number of samples it should be collected between the two classes. However in some cases, e.g. rare pathologies, the approach to be taken is less evident. We propose to address this issue by applying a modified version of SAM [2]. MultiSAM consists in a reiterated application of a SAM analysis, comparing the less populated class (LPC) with 1,000 random samplings of the same size from the more populated class (MPC) A list of the differentially expressed genes is generated for each SAM application. After 1,000 reiterations, each single probe given a "score" ranging from 0 to 1,000 based on its recurrence in the 1,000 lists as differentially expressed. The performance of MultiSAM was compared to the performance of SAM and LIMMA [3] over two simulated data sets via beta and exponential distribution. The results of all three algorithms over low- noise data sets seems acceptable However, on a real unbalanced two-channel data set reagardin Chronic Lymphocitic Leukemia, LIMMA finds no significant probe, SAM finds 23 significantly changed probes but cannot separate the two classes, while MultiSAM finds 122 probes with score >300 and separates the data into two clusters by hierarchical clustering. We also report extra-assay validation in terms of differentially expressed genes Although standard algorithms perform well over low-noise simulated data sets, multi-SAM seems to be the only one able to reveal subtle differences in gene expression profiles on real unbalanced data. In Chapter 4 a method to adress similarities evaluation in a three-class prblem by means of Relevance Vector Machine [4] is described. In fact, looking at microarray data in a prognostic and diagnostic clinical framework, not only differences could have a crucial role. In some cases similarities can give useful and, sometimes even more, important information. The goal, given three classes, could be to establish, with a certain level of confidence, if the third one is similar to the first or the second one. In this work we show that Relevance Vector Machine (RVM) [2] could be a possible solutions to the limitation of standard supervised classification. In fact, RVM offers many advantages compared, for example, with his well-known precursor (Support Vector Machine - SVM [3]). Among these advantages, the estimate of posterior probability of class membership represents a key feature to address the similarity issue. This is a highly important, but often overlooked, option of any practical pattern recognition system. We focused on Tumor-Grade-three-class problem, so we have 67 samples of grade I (G1), 54 samples of grade 3 (G3) and 100 samples of grade 2 (G2). The goal is to find a model able to separate G1 from G3, then evaluate the third class G2 as test-set to obtain the probability for samples of G2 to be member of class G1 or class G3. The analysis showed that breast cancer samples of grade II have a molecular profile more similar to breast cancer samples of grade I. Looking at the literature this result have been guessed, but no measure of significance was gived before.

Il ruolo della grande distribuzione nello sviluppo locale. Un'indagine sul contesto italiano

Supermarkets and hypermarkets still represent a relatively new retailing format in Italy and in its Southern area in particular, where they were introduced decades later than in other Western countries, such as France and the UK in Europe, and the US in America. Nowadays, these retailers have become large organisations potentially capable of influencing local development from an economic, social and urban perspective. The literature concerned with their effects on the local economy, in particular, has focused on labour markets, price dynamics, inter-type competition, instead the impact on macroeconomic factors such as GDP, value added and investments in specific sectors, as agriculture, industry and services. This study tries to fill this gap by empirically investigating associations between key characteristics of these retailers and specific macroeconomic factors.