Brain-computer music interfacing for continuous control of musical tempo

A Brain-computer music interface (BCMI) is developed to allow for continuous modification of the tempo of dynamically generated music. Six out of seven participants are able to control the BCMI at significant accuracies and their performance is observed to increase over time.

Is there a Rhythm Of The Rain? An analysis of weather in popular music

Weather is frequently used in music to frame events and emotions, yet quantitative analyses are rare. From a collated base set of 759 weather-related songs, 419 were analysed based on listings from a karaoke database. This article analyses the 20 weather types described, frequency of occurrence, genre, keys, mimicry, lyrics and songwriters. Vocals were the principal means of communicating weather: sunshine was the most common, followed by rain, with weather depictions linked to the emotions of the song. Bob Dylan, John Lennon and Paul McCartney wrote the most weather-related songs, partly following their experiences at the time of writing.

L1 Acquisition of interface properties across Portuguese dialects: modular and interdisciplinary interfaces as sources of explanation

This study investigates the child (L1) acquisition of properties at the interfaces of morphosyntax, syntax-semantics and syntax-pragmatics, by focusing on inflected infinitives in European Portuguese (EP). Three child groups were tested, 6–7-year-olds, 9–10-year-olds and 11–12-year-olds, as well as an adult control group. The data demonstrate that children as young as 6 have knowledge of the morpho-syntactic properties of inflected infinitives, although they seem at first glance to show partially insufficient knowledge of their syntax–semantic interface properties (i.e. non-obligatory control properties), differently from children aged 9 and older, who show clearer evidence of knowledge of both types of properties. However, in general, both morpho-syntactic and syntax–semantics interface properties are also accessible to 6–7-year-old children, although these children give preference to a range of interpretations partially different from the adults; in certain cases, they may not appeal to certain pragmatic inferences that permit additional interpretations to adults and older children. Crucially, our data demonstrate that EP children master the two types of properties of inflected infinitives years before Brazilian Portuguese children do (Pires and Rothman, 2009a,b), reasons for and implications of which we discuss in detail.

Hypercentral unit groups and the hyperbolicity of a modular group algebra

We classify groups G such that the unit group U-1 (ZG) is hypercentral. In the second part, we classify groups G whose modular group algebra has hyperbolic unit groups U-1 (KG).

Synthesis of new fluorous modular chiral ligand derivatives from amino alcohols and application in enantioselective carbon-carbon bond-forming alkylation reactions

N-Trifluoracyl beta-chalcogeno amides and N-perfluoracyl beta-thio amide ligands were prepared by a simple and efficient reaction sequence. These new ligands were evaluated in palladium-catalyzed alkylation of rac-(E)-1,3-diphenyl-2-propenyl acetate in the presence of dimethyl malonate and an enantioselectivity of up to 99% was obtained. After catalysis, the fluorous ligand can be easily recovered by liquid-liquid extraction and reused without loss in the activity. (C) 2010 Elsevier Ltd. All rights reserved.

Proceedings from the 2nd seminar on Development of Modular Products : December 13-14, 2004, Campus Framtidsdalen, Dalarna University, Sweden

Companies are focusing on efforts increasing the overall efficiency at the same time as the ability to meet customer needs becomes even more important. There is a need to improve the organisation and the product design at the same time through the visualisation of how a product family design should be performed in order to adapt to customers, company internal issues, and long-term strategy. Therefore, there is a need for qualified personnel in today’s companies with the knowledge of product development and modularity. The graduate course Development of Modular Products at Högskolan Dalarna has the objective to provide such knowledge. As a part of the course, each student will individually perform extensive research within a chosen area with respect to Product Development and Modularity. This proceeding is the result of the students own work and was presented during a two day seminar at Dalarna University. The contents of the papers cover many areas, from the identification of customer needs to cost effective manufacturing, and benefits of modularisation. The reader of this proceeding will not only benefit from many areas within Product Development and Modularity but also from the colour of many cultures. In this proceeding, students from nine countries are represented (Bangladesh, China, Costa Rica, Germany, Holland, India, Luxembourg Nigeria, and Sweden). Enjoy the reading.

Studies of Design and Assembly Defects on Integrated and Modular Architectures

It is known that despite companies’ efforts to improve the quality of their products, design and assembly defects results in large repair costs both in terms of repair and providing feedback to the origin of the defect. The purpose of this paper is to study these types of defects and the defect rates in design and assembly. The paper presents a web based questionnaire answered by 29 companies. The result shows that the defect rate (defects per product) spanned from 0.01 to 10. Also, design and assembly defects covered 46%, 23% respectively, of all occurred defects. A case study is also presented, performed at a company who recently implemented a modular architecture. In this company, defects from 5 700 integrated product architectures are compared with defects from 431 modular architectures. The average defect rate increased by 21.5% – from 0.65 to 0.79 – when a more modular architecture has been implemented. Furthermore, the study showed that the assembly defects have decreased while the design defects increased. The results presented in this paper will also support the development of the MPV (Module Property Verification) method which is briefly described.

Module property verification : A method to plan and perform quality verifications in modular architectures

Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve. This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased. The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B. The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits

Modular Product Verifications Based on Design for Assembly

The desire to conquer markets through advanced product design and trendy business strategies are still predominant approaches in industry today. In fact, product development has acquired an ever more central role in the strategic planning of companies, and it has extended its influence to R&D funding levels as well. It is not surprising that many national R&D project frameworks within the EU today are dominated by product development topics, leaving production engineering, robotics, and systems on the sidelines. The reasons may be many but, unfortunately, the link between product development and the production processes they cater for are seldom treated in depth. The issue dealt with in this article relates to how product development is applied in order to attain the required production quality levels a company may desire, as well as how one may counter assembly defects and deviations through quantifiable design approaches. It is recognized that product verifications (tests, inspections, etc.) are necessary, but the application of these tactics often result in lead-time extensions and increased costs. Modular architectures improve this by simplifying the verification of the assembled product at module level. Furthermore, since Design for Assembly (DFA) has shown the possibility to identify defective assemblies, it may be possible to detect potential assembly defects already in the product and module design phase. The intention of this paper is to discuss and describe the link between verifications of modular architectures, defects and design for assembly. The paper is based on literature and case studies; tables and diagrams are included with the intention of increasing understanding of the relation between poor designs, defects and product verifications.

Musiken ler, bilden skriker : En analys av ”anempathetic music” i film

Denna kandidatuppsats avhandlar tre stycken analyser av tre stycken filmscener från filmerna A Clockwork Orange, Reservoir Dogs och Watchmen, tre stycken exempel på scener där så kallad anempathetic music används. Denna form av musik kan beskrivas som att den distanserar sig från vad som händer i den rörliga bilden genom att förmedla den motsatta känslan, till exempel om musiken är glad och lättsam medan en våldtäkt sker i bild. Denna uppsats analyserar i dessa tre analysexempel vad sådan filmmusik kan bidra med för berättarfunktioner och meningspotential i filmexemplens narrativ. Resultaten från analysen visade på att musiken i de tre valda analysexemplen bidrar till ökad reflektion hos publiken och hur detta möjliggör för att anempathetic music kan ses som empathetic mot publiken och deras tolkning av filmscenernas narrativ.

The Music Salon in Falun During the 19th Century

The aim of the project is to examine the music salon in Falun as a part of the mining community and in the historical context of European salon culture. A specifc goal is to develop a deeper understanding about the salon when it comes to education and pedagogic ideas. Of a certain interest is Johan Henrik Munktell’s (1804-1861) education travelling (bildningsresor). Inspired by Mendelssohn’s music salon in Berlin and the early salons in Upp-sala he created his own salon in Grycksbo. A letter collection from J.H. Munktell to his father J.J. Munktell in 1828-30 can be considered a unique historical material, which places the salon in Falun in a continental context of culture, education and industrial pretensions. The results have potential to extend the knowledge of Nordic salon culture and how it has infuenced general pedagogy and music education.