Tumor odontogênico queratocístico: considerações clínico-cirúrgico

Introduction: The tumor odontogenic keratocyst (toq) is a benign disorder, which is controversial in its diagnosis and treatment. It is characterized by a true neoplasms arising from remnants the dental lamina. It occurs predominantly in the angle mandible, which may or may not be related to a tooth and whose importance is due to its aggressive behavior and high recurrence rate. The causes of the high recurrence rates. The thin capsule and friable tissue may favor the toq retention of epithelial debris and, moreover, the presence of satellite cells in the lesion site is responsible for the increased proliferative capacity of clinical entity. Objective: To present the peculiarities toq inherent in using a clinical case of toq in mandible. Case report: TOQ in the jaw in patient, 16 years old male presenting important lesion radiographically radiolucent related to the impacted tooth. Final comments: In consideration of the high rate of recurrence chosen treatment proved effective and was not any evidence of recurrence.

Tumor odontogênico queratocístico: relato de caso

Introduction: The odontogenic keratocyst tumor (OKT) derived from dental lamina rests with particularities and specific histological features, with high rates of relapse and aggressive clinical behavior. Presents certain predilection for males, affecting the mandible of 60% to 80% of cases may be related to impacted tooth 25 to 45% of cases. Objective: To highlight the clinical, histopathological and imaging procedures of the OKT, as well as discuss the treatment of this injury. Case Report: To report a case of 10 years of age to look for the orthodontist to correct anterior open bite was observed in panoramic radiography radiolucent area in the region of the body of the mandible associated with pathological inclusion of the lower premolar. It was performed an incisional biopsy of the lesion and the histopathologic diagnosis was odontogenic keratocyst tumor. It was performed a CT scan to assess the extent of the injury and its relation to anatomic structures. How to conduct, we opted for the extraction of the deciduous molar and enucleation of the lesion, preserving the premolar included. The same goes on clinical and radiographic control 18 months, after removal of OKT obtaining the eruption of premolar that was involved in the injury. Final Comments: It is necessary to adopt protocols that include dental care knowledge of oral diagnosis, medical history and careful clinical evaluation without forgetting the need for histopathological confirmation.

Quarto molar retido: a importância do diagnóstico precoce

Introductions: A supernumerary tooth is one that is additional to the normal series and can be found in almost any region of the dental arch. Its etiology is not fully understood. With regard to its prevalence, it occurs more commonly in permanent dentition and twice as often in men than in women. Supernumerary teeth are classified according to their morphology and location. Their presence can cause problems such as failure of eruption, displacement of teeth, crowding and odontogenic cysts and tumors. The diagnosis is usually by routine radiographs, for the majority of such teeth are impacted and asymptomatic. Objective and Case report: The purpose of this study was to make a brief review of the relevant literature and report one clinical case of the female patient, 23 years, melanoderma, featuring three quarters molars. Final considerations: The early diagnosis proved to be important for the resolution of the case in order to minimize or even prevent the development of complications and thus establish a proper plan of treatment.

Reconstrução imediata de fenestração peri-implantar com enxerto autógeno em bloco de ramo mandibular

Alveolar wall fenestrations are common during implant placement. The aim of this paper is to report a case where a peri-implant bone fenestration was reconstructed immediately after implant placement by an autogenous mandibular bone block. A male patient was referred to the Department of Surgical and Integrated Clinics to substitute his Kennedy´s Class IV removable partial denture for an implantsupported fixed prosthesis. A peri-implant bone fenestration at the buccal wall was seen at the region of 12, being reconstructed by a mandibular bone block secured by a bicortical screw. Six months later the surgical procedures, an implant-supported complete fixed partial prosthesis was developed. The autogenous bone block harvested from the mandibular ramus was a safe alternative to reconstruct the peri-implant bone defect such as fenestration types.

Surgical-orthodontic tractio for impacted maxillary canines: a critical review and suggested protocol

Maxillary canine impaction is a common occurrence, especially in the palate, despite sufficient space in the arch for tooth alignment. A proper approach requires knowledge of different specialties of dentistry, such as orthodontics, surgery, radiology, and periodontology, which are generally not centered on a single professional. The causes for canine impaction may be either generalized or localized, and the diagnosis should be made through specific clinical and radiographic examination. The prognosis of surgical-orthodontic treatment depends on the position of the canine in relation to the neighboring teeth and height of the alveolar process, in addition to careful surgical technique, considering that there are risks involved, such as ankylosis, loss of tooth vitality, root resorption of the involved tooth and adjacent teeth, and damage to supporting tissues. Given the important role played by impacted maxillary canines, their traction is the treatment of choice in orthodontically treated patients. The present study reviews the literature on important factors to be considered when approaching impacted canines, such as therapeutic possibilities, their advantages and disadvantages.

Tumor odontogênico queratocístico: revisão de literatura

The odontogenic keratocyst is called keratocyst odontogenic tumor (TOQ), due to its features compatible with neoplasms, such as its high recurrence rate and mechanism of growth. Although its etiology has unknown, the origin seems to be connected with dental lamina remaining. This entity is generally benign, with slow progression, asymptomatic, and among the odontogenic tumors, its prevalence is high. It affects mainly males, with predilection for the posterior mandible, while in most cases associated with an impacted tooth. Radiographically, this lesion is unilocular. Histological features are stratified epithelial basal cells with hyperchromatic paraqueratinizado. Treatment ranges from conservative to radical interventions. As a result of the controversy as TOQ tumor entity, the present work is a literature review of current findings, emphasizing its intrinsic features to contribute to developments in the study of this new entity.

Enxerto de tecido conjuntivo para correção da margem peri-implantar

Soft tissue recessions frequently cause esthetic disharmony and dissatisfaction. The results of coverage in peri-implant sites, in comparison with soft tissue coverage around a tooth, is less predictable. This clinical report describes the correction of an esthetic problem with a single-tooth implant-supported using a subepithelial connective tissue graft (SCTG) combined with the re-establishment of a new limit of gingival margin, and emergence crown profile. After anamnese and clinical exam it was observed an implant in the region of tooth 22 in vestibular position to alveolar ridge with a recession of 5 mm in its vestibular face. In the first cirurgical procedure the crown and the abutment were removed and a SCTG associated with a coronally positioned flap was performed in order to re-establish the limit of gingival margin. After 90 days, it was observed that the tissue in the implant site showed no adequate volume or thickness. Because of that, another SCTG was performed. The reopening procedure to install the healing cap was performed after 4 weeks. Then the prosthesis was installed. At 180 and 360 days postoperative, the implant adjacent tissue presented regular contour, color compatible with health and absence of bleeding. The patient was satisfied with the esthetic result. According to the clinical results and favorable esthetics it was possible to conclude that the use of ETC to correct an esthetic deficiency may be a feasible approach to establish new and stable peri-implant soft tissue contours.

Fatores biomecânicos relevantes na seleção dos grampos em próteses parciais removíveis com extremo livre: estudo clínico

The free-end removable partial dentures (RPD) shows a complicated and peculiar biomechanical behavior that impose high occlusion forces to the abutment teeth. By this way, the aim of this study was to evaluate the several factors that influence the clasps indication to free-end RPD. It was analysed 84 designed and planned study models of 71 patients, involving 130 clasps near-by a free-end; followed by clinical and radiographical informations. It was observed that bar clasps (“T”, “Tmod”, “i”) were used in 88.46% of abutment teeth. In the others (11.55%), it was used simple, combinated or ring circumferential clasps, and MDL. In abutment teeth with high equator line the “i” clasps were predominant (48.48%). The “Tmod” clasps were predominant in abutment teeth with low equator line (50%) or in middle third (51.35%) and “T” clasps were predominant in inclined equators with mesio-buccal (56.52%) or disto-buccal (66.66%) retention. In the posterior abutment teeth, it was prevalent the distal rest (63.52%) and embracing to the adjacent tooth. Some others factors like long clinical crown (5.38%), wrong position of abutment teeth (4.61%), aesthetics (3.07%), retention in alveolar ridge (2.3%), fragility of abutment teeth (1.53%), short clinical crown (0.76%) and short space to the clasp (0.76%) influenced directly during the clasps selection. Factors like mobility of abutment teeth, height of muscular insertions, depth of buccal fornix and antagonist arch acted like secondary factors. After the informations analysis it may be concluded that the bar clasps with distal rest and embracing to the adjacent tooth were the most indicated to free-end RPD

Análise por computação gráfica das alterações produzidas em próteses totais superiores imersas diretamente em água e pela termociclagem

Objectives: This study aimed to assess dimensional changes in acrylic resin base and artificial teeth position after water storage and thermocycling using computer graphics measurements. Methods: Twenty-four waxed replicas were obtained from a previous upper complete denture. For linear measurements, points in cusps tips of left central incisor and second premolars and molars were marked in one of the prostheses with graphite and transferred to the others using an acrylic resin guide. The prostheses were scanned after waxing, polymerization and treatments and the images were exported to “AutoCad 2002 Today®” software for measurements. Results: There was no statistically significant difference in changes of each segment for each group and between the phases evaluated after polymerization and thermocycling. In groups I and III, the values after polymerization are higher than those after treatment, which suggests shrinkage while the prostheses in group II have expanded. Conclusion: The three groups exhibited artificial teeth movement after tests in comparison to the polymerized prosthesis. The prostheses submitted to water storage in kiln at 36ºC during seven days showed different behavior than the other groups.

Clareamento dentário x autoestima x autoimagem

Dental changes that compromise facial harmony can have serious consequences on the social image of the patient. Depending on the emotional significance for the individual it can change interpersonal relationships, causing profound changes in their patterns of self-acceptance and self-image, with profound effects on their self-esteem of the patient. The search for tooth whitening as cosmetic factor for a harmonic smile grew sharply in the last decade. Although the color of the tooth represents only one aspect in the set of determinants of facial harmony, it is a strong factor because it is quickly perceived. This study aims to report the clinical case of a patient with spots on their upper central incisors. For the patient these spots have compromised her smile, causing harm and discomfort in their everyday social and professional relationships.

Registro do perfil de emergência para mimetização dos dentes naturais na região estética

Introdução: o tratamento com implantes dentários para a reposição de dentes na região estética exige a utilização de materiais e técnicas que permitam o máximo de naturalidade entre a restauração, os dentes vizinhos e o tecido gengival. Dessa forma, torna-se necessário criar o correto perfil de emergência para o dente, assim como a utilização de materiais com alto potencial estético. Objetivo: o objetivo do presente trabalho foi ilustrar, através de um caso clínico, a utilização de uma técnica de moldagem para a correta cópia do perfil de emergência do dente e sua transferência para o modelo de trabalho, tornando possível a confecção de uma restauração totalmente cerâmica, perfeitamente integrada ao tecido gengival. Caso clínico: paciente de 30 anos, procurou o clínica de prótese dentária com desejo de melhorar a estética dos dentes. Após diagnóstico e planejamento, foram confeccionadas 2 coroas totalmente cerâmicas sobre os dentes 12 e 21, e confecção de 1 coroa cerâmica sobre um pilar de zircônia após o estabelecimento e registro do perfil de emergência do dente 11. Conclusão: após a conclusão do tratamento, observou-se naturalidade, estética e perfeita integração entre as restaurações, os dentes remanescentes e o tecido gengival.

Laminados cerâmicos em dentes tratados endodonticamente: considerações restauradoras e endodônticas com finalidade protética

A harmonia e beleza de um sorriso podem ser comprometidos pela presença de apenas um dente da região anterior que se apresente escurecido, mesmo que os demais elementos estejam alinhados e com forma adequada. A alteração de coloração, mesmo que mínima, sendo na região frontal é capaz de gerar um ponto de tensão e de desequilíbrio no sorriso, concentrando o olhar do observador no local1,2,3. Logo, a demanda dos pacientes por um sorriso estético, belo e harmonioso aumenta o desafio do profissional que visa integrar as características ópticas de um dente anterior despolpado e escurecido com os demais dentes polpados e sem manchamentos significativos. O clareamento é a alternativa mais conservadora para resolver o escurecimento em dentes despolpados. Apesar de resultados satisfatórios, alguns clínicos e autores relutam em assumir, como rotina, os procedimentos de clareamento para dentes despolpados, pelo alto índice de recidiva de escurecimento4,5. Mas, é importante lembrar que as recidivas descritas, normalmente, não contemplam um retorno aos valores inicias de manchamento. Deve ser feito um bom planejamento, levando em considerações fatores como a idade do paciente, o grau de escurecimento, o tempo em que o dente se encontra escurecido e a dificuldade em se alcançar o clareamento do dente, que são determinantes para o sucesso do tratamento clareador e para estabelecer a longevidade do clareamento obtido. Por isso, não são todos os dentes despolpados que apresentam alteração de cor que podem ser clareados, devendo ser avaliados com precisão os critérios estabelecidos3. Os dentes tratados endodonticamente e escurecidos, muitas vezes, necessitam da reintegração estética, associando as técnicas de clareamento com procedimentos restauradores ou, dependendo da condição do dente, a escolha imediata por procedimentos restauradores diretos ou indiretos.

Considerações relevantes na seleção de dentes artificiais

Nowadays the search for aesthetic in removable dentures is considered a success clinical factor. Besides, both the selection of artificial denture teeth and the characterization of dentures have been based on the facial harmony and cultural factors. But these factors change over time. Therefore, the present study aimed to discuss the selection of artificial denture teeth in relation to patient’s variables such as face shape, skin color, hair color, eye color, age and gender. Moreover, artificial denture teeth’ color, shape and size were presented.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.