USE OF STARTER CULTURES TO IMPROVE PORTUGUESE TRADITIONAL SAUSAGES

In Mediterranean countries, such as Portugal, traditional dry-fermented sausages are highly appreciated. They are often still being manufactured in small processing units, according to traditional procedures. The aims of the present study were to evaluate the effect of different starter cultures and their optimal concentration, to reduce the microbial load in end-products, with the purpose to improve the sausages’ safety, without deteriorating sensory acceptability. pH, aw, colour, texture and microbiological profile were assessed. On the other hand, a sensory panel evaluated the products. Based on the first results, S. xylosus and L. sakei were chosen to be inoculated together with a yeast strain. In the mixed starter culture experiment, a food safety issue arose probably related to the higher aw value (0.91). The presence of Salmonella spp. detected in a few end-products sausages did not allow a full sensory evaluation in the mixed starter culture experiment. However, in the two preliminary experiments, the use of starter cultures did not depreciate the panellists’ overall appreciation and products acceptability.

Aditivos químicos e biológicos na ensilagem de cana-de-açúcar: 1. composição química das silagens, ingestão, digestibilidade e comportamento ingestivo

Avaliou-se o efeito da inclusão de aditivos na ensilagem de cana-de-açúcar (Saccharum officinarum L.) sobre a composição químico-bromatológica das silagens, o comportamento ingestivo, o consumo voluntário e a digestibilidade em bovinos de corte. Utilizaram-se cinco novilhos da raça Nelore providos de cânula ruminal, alocados em delineamento quadrado latino 5 ´ 5 e alimentados com dietas com 65% de volumoso na MS. Foram avaliadas cinco silagens (base úmida): controle - cana-de-açúcar sem aditivos; uréia - cana-de-açúcar + 0,5% uréia; benzoato - cana-de-açúcar + 0,1% de benzoato de sódio; LP - cana-de-açúcar inoculada com Lactobacillus plantarum (1 ´ 10(6) ufc/g MV); LB - cana-de-açúcar inoculada com L. buchneri (3,6 ´ 10(5) ufc/g forragem). A forragem foi armazenada em silos do tipo poço por 90 dias antes do fornecimento aos animais. A composição químico-bromatológica da cana-de-açúcar foi alterada após a ensilagem, em relação à cana-de-açúcar original, com redução no teor de carboidratos solúveis e na digestibilidade in vitro e elevação relativa nos teores de FDN e FDA. Os teores de etanol (0,30% da MS) e ácidos orgânicos (0,99% de ácido lático e 2,31% de acético) foram baixos e semelhantes entre as silagens. Os aditivos aplicados na ensilagem não promoveram alterações no consumo e na digestibilidade aparente da MS (7,2 kg/dia e 63,6%, respectivamente). O comportamento ingestivo dos animais também não foi alterado, com tempos médios de 230,6; 519,6 e 672,8 minutos/dia despendidos com ingestão de ração, ruminação e ócio, respectivamente. Os aditivos acrescidos à cana-de-açúcar promoveram pequenas alterações na maioria das variáveis avaliadas.

Aditivos químicos ou biológicos na ensilagem de cana-de-açúcar: 2. parâmetros ruminais e degradabilidade da matéria seca e das frações fibrosas

Objetivou-se avaliar o efeito da inclusão de aditivos na ensilagem de cana-de-açúcar (Saccharum officinarum L.) sobre a degradação de MS e de componentes da parede celular e sobre os parâmetros de fermentação ruminal em bovinos alimentados com dietas contendo essas silagens. Utilizaram-se cinco novilhos da raça Nelore providos de cânula ruminal, alocados em delineamento quadrado latino 5 ´ 5 e alimentados com dietas com 65% de volumoso (%) MS. Foram avaliadas cinco silagens (base úmida): controle - cana-de-açúcar, sem aditivos; uréia - cana-de-açúcar + 0,5% ureia; benzoato - cana-de-açúcar + 0,1% de benzoato de sódio; LP - cana-de-açúcar inoculada com Lactobacillus plantarum (1 ´ 10(6) ufc/g MV); LB - cana-de-açúcar inoculada com L. buchneri (3,6 ´ 10(5) ufc/g forragem). A forragem foi armazenada em silos do tipo poço por 90 dias antes do fornecimento aos animais. Os parâmetros ruminais foram afetados de forma moderada pelas silagens e tiveram forte efeito do horário de coleta de amostras. As concentrações molares médias dos ácidos acético, propiônico e butírico foram de 60,9; 19,3 e 10,2 mM, respectivamente. O ambiente ruminal proporcionado por dietas formuladas com silagens de cana-de-açúcar foi satisfatório e similar ao tradicionalmente observado em dietas contendo cana. O uso de aditivos na ensilagem influenciou, de forma não-significativa, a degradabilidade ruminal da MS e da MO, mas não alterou a degradabilidade ruminal da fração fibrosa. Os aditivos aplicados à cana-de-açúcar resultaram em pequenas alterações na maior parte das variáveis avaliadas. Apesar de a degradabilidade ruminal das silagens ter sido pouco afetada pelo uso de aditivos, os valores observados foram próximos aos observados para a cana-de-açúcar in natura.

MICROBIOLOGICAL ANALYSIS OF TRADITIONALLY FERMENTED MILK SOLD IN KINIGI SECTOR OF MUSANZE DISTRICT IN RWANDA

A research work entitled: “Microbiological analysis of traditionally fermented milk (Ikivuguto) sold in Kinigi Sector of Musanze District,” was carried out at Higher Learning Institution of Applied Sciences (INES-Ruhengeri) Laboratory of Microbiology located near Volcanoes in the Northern Province of Rwanda. The main objective of this work was to determine the microbiological quality of traditionally fermented milk, which is consumed by Kinigi Center local people. The hypothesis was to analyze if traditionally fermented milk commercialized in Kinigi restaurants contained pathogenic bacteria such as fecal coliforms and Escherichia coli , in addition to staphylococci and yeasts. Milk samples were collected from Kinigi sector and examined in the microbiology laboratory in order to assess the microbiological quality and safety of traditionally fermented milk in rural areas. The samples were analyzed qualitatively and quantitatively for the microbes found in fermented milk sold in Kinigi Center, and the results were as follows: 7.21x107 CFU/ml for total counts; 3.89x107 CFU/ml for Lactobacillus ; 2.77x107 CFU/ml for yeasts; 1.196x105 CFU/ml for total coliforms; 9.63x104 CFU/ml for fecal coliforms and 8.92x103 CFU/ml for staphylococci. Biochemical tests were carried out and the results showed that identified pathogens were E. coli, Providencia alcalifaciens , and the staphylococci group. It was found that fermented milk contained genera and species of Staphylococcus haemolyticus , Staphylococcus aureus , Staphylococcus intermedius , Staphylococcus xylosus and Staphylococcus saprophyticus . Findings showed that the commercial milk samples were cross-contaminated by different pathogens from environment. These contaminations could have been due to improper handling, presence of flies, soil erosion, dust from atmosphere, as well as contaminated milk vessels or pots, stirrers and unpasteurized water. It was concluded that local farmers and milk retailers did not adhere to required hygienic conditions for milk safety. In this regard, the sold traditional fermented milk does not meet health and safety standards because people did not respect good manufacturing practices. The hypothesis and main objective were confirmed, because traditionally fermented milk of Kinigi was cross-contaminated before consumption. Thus, it would be better to train farmers in the areas of product hygiene, sanitation and safety during milking, processing and marketing.

Amino acid composition of processed fish silage using different raw materials

The objective was to evaluate amino acid composition of silages produced from three raw materials. Commercial marine fish waste, commercial freshwater fish waste, and tilapia filleting residue were used to produce fish silage by acid digestion (20 ml/kg formic acid and 20 ml/kg sulfuric acid) and anaerobic fermentation (50 g/kg Lactobacillus plantarum, 150 g/kg sugar cane molasses). Protein content and amino acid composition were determined for raw materials and silage. Marine fish waste had higher crude protein content (776.7 g/kg) compared to freshwater fish waste (496.2 g/kg) and tilapia filleting residue (429.9 g/kg). All silages lacked up to three amino acids for each product according to FAO standards for essential amino acids. However, considering as the limiting factor only the amino acids below the 30% minimum requirement for fish in general, all products were satisfactory with respect to essential amino acids. Therefore, the results suggest that all products investigated are appropriate for use in balanced fish diets. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Production of bioactive metabolites by intestinal bacteria

The adult intestinal microbiota comprises a microbial ecosystem of approximately 100 trillion microorganisms, with specific bacterial communities holding distinct metabolic capabilities. Bacteria produce a range of bioactive compounds to survive unfavourable stimuli and to interact with other organisms, and generate several bioactive products during degradation of dietary constituents the host is not capable of digesting. This thesis addressed the impact of feeding potential probiotic bacteria and other dietary strategies such as pure fatty acids and prebiotics, on gut microbiota composition, short chain fatty acid (SCFA) production and modulation of metabolism in animal models. In the first experimental chapter (Chapter 2) a gas chromatography method for the quantification of SCFA was optimized and applied in the analysis of caecal samples obtained in animal studies described in other chapters of this thesis. In Chapter 3, t10, c12 CLA supplementation was shown to significantly alter murine gut microbiota composition and SCFA production rather than no supplementation. These changes were suggested to be extra factors affecting host lipid metabolism. Chapter 4 described the contrasting effects of CLA-producing strains, Bifidobacterium breve DPC 6330 and B. breve NCIMB 702258, on murine fat distribution/composition and gut microbiota composition, suggesting that these changes were most likely strain-dependent. In Chapter 5, dietary GABA-producing strain Lactobacillus brevis DPC 6108 was shown to significantly increase (p<0.05) serum insulin in healthy rats, leading to a second experiment using a type 1 diabetes rat model. Lb. brevis DPC 6108 administration did not change insulin levels in diabetic rats, but attenuated high levels of glucose when compared to diabetic control. However, an auto-immune-induced diabetes model was suggested as a better model to study GABA-related effects on diabetes. In Chapter 6 bovine milk oligosaccharides, 6’sialyllactose and Beneo Orafti P95 oligofructose supplementations were associated with depletion or reduction of less favourable bacteria, demonstrating that ingestion of these oligosaccharides might be a safe and effective approach to modulate populations of the intestinal microbiota. In Chapter 7 (General discussion) the major findings of all studies were reviewed and discussed.

Microbially derived bioactive peptides to improve human health

This thesis describes a study of various methods to produce bioactive peptides. Initially, the generation of anti-Cronobacter spp. peptides by fermentation of milk protein is described. Lactobacillus johnsonii DPC6026 was used to generate two previously described antimicrobial peptides. Phenotypic analysis indicated unsatisfactory casein hydrolysis. The genome of the strain was sequenced and annotated. Results showed a number of unique features present, most notably a large symmetrical inversion of approximately 750kb in comparison with the human isolate L. johnsonii NCC 533. The data suggest significant genetic diversity and intra-species genomic rearrangements within the L. johnsonii spp.. Cronobacter spp. have emerged as pathogens of concern to the powdered infant formula industry. Chapters 3 and 4 of this thesis describe novel methods to generate two antimicrobial peptides, Caseicin A and B. In Chapter 3 a bank of Bacillus strains was generated and investigated for caseicin production. Following casein hydrolysis by specific B. cereus and B. thuringiensis strains the peptides of interest were generated. Chapter 4 describes a sterile enzymatic method to generate peptides from casein. Bioinformatic tools were used to predict enzymes capable of liberating caseicin peptides from casein. Hydrolysates were generated using suitable enzymes, examined and some were found to produce peptides with activity against Cronobacter spp.. This study establishes a potential industrial-grade method to generate antimicrobial peptides. Administration of GLP-1 leads to improved glycaemic control in diabetes patients. Generation of a recombinant lactic acid bacteria capable of producing a GLP-1 analogue is described in Chapter 5. In-vivo analysis confirmed insulinotropic activity. The results illustrate a method using bacteriocin producing cellular machinery to generate bioactive peptides. This thesis describes the generation of bioactive peptides by bacterial fermentation, tailored enzymatic hydrolysis and recombinant bacterial methods. The techniques described contribute to bioactive peptide research with regards novel methods of production and industrial scale-up.

Utilización de antimicrobianos en las infecciones odontogénicas en niños y adolescentes: análisis farmacocinético/farmacodinámico (PK/PD)

El objetivo de este estudio es evaluar la eficacia de los tratamientos más utilizados en infecciones odontogénicas en niños y adolescentes aplicando criterios farmacocinéticos/farmacodinámicos (PK/PD). Se han simulado las curvas de concentración plasmática libre-tiempo a partir de parámetros farmacocinéticos medios de amoxicilina, amoxicilina-ácido clavulánico, cefuroxima axetilo, espiramicina, clindamicina, azitromicina y metronidazol. Para los antibióticos con actividad dependiente del tiempo, se ha calculado el tiempo durante el cual las concentraciones permanecen por encima de la concentración inhibitoria mínima (CIM90) de los microorganismos (T>CIM). Para los antimicrobianos con actividad dependiente de la concentración, se ha calculado el cociente entre el área bajo la curva y la CIM90 (ABC/CIM90). Con amoxicilina-ácido clavulánico (80 mg/kg/día) se han obtenido índices de eficacia adecuados frente a los microorganismos estudiados (T > CIM > 40%), excepto paraVeillonella spp. Clindamicina (40 mg/kg/día) también ha presentado índices PK/PD adecuados frente a la mayoría de los patógenos, excepto Lactobacillus, Actinobacillus actinomycetemcomitans, Peptostreptococcus resistente a penicilina y Eikenella corrodens. Con dosis altas de amoxicilina los resultados no han sido satisfactorios frente a varias especies bacterianas. Con azitromicina y metronidazol no se han alcanzado valores adecuados frente a la mayoría de patógenos (ABC/CIM90 < 25). En conclusión, el tratamiento empírico más adecuado en infecciones odontogénicas en niños y adolescentes es amoxicilina-ácido clavulánico en altas dosis de amoxicilina, aunque se puede utilizar como alternativa clindamicina. Sería conveniente confirmar estos resultados mediante ensayos clínicos, para cuyo diseño y evaluación podría ser de gran utilidad la aplicación de estudios PK/PD.

Microencapsulation of flaxseed oil in flaxseed protein and flaxseed gum complex coacervates

Flaxseed oil, a rich source of omega-3 fatty acids, was microencapsulated in a novel matrix formed by complex coacervation between flaxseed protein isolate (FPI) and flaxseed gum (FG). This matrix was crosslinking with glutaraldehyde. Liquid microcapsules with three core (oil)-to-wall ratios (1:2, 1:3 and 1:4) were prepared and spray-dried or freeze-dried to produce powders. The microencapsulation efficiency, surface oil, morphology and oxidative stability of these microcapsules were determined. The spray-dried solid microcapsules had higher oil microencapsulation efficiency, lower surface oil content, smoother surface morphology and higher oxidation stability than the freeze-dried microcapsules. The highest microencapsulation efficiency obtained in spray-dried microcapsules was 87% with a surface oil of 2.78% at core-to-wall ratio 1:4 and oil load 20%. The oxidation stability obtained from spray-dried microcapsules at core-to-wall ratio of 1:4 was nearly double that of the unencapsulated flaxseed oil.

Microencapsulation of chia seed oil using chia seed protein isolate-chia seed gum complex coacervates

Chia seed oil (CSO) microcapsules were produced by using chia seed protein isolate (CPI)-chia seed gum (CSG) complex coacervates aiming to enhance the oxidative stability of CSO. The effect of wall material composition, core-to-wall ratio and method of drying on the microencapsulation efficiency (MEE) and oxidative stability (OS) was studied The microcapsules produced using CPI-CSG complex coacervates as wall material had higher MEE at equivalent payload, lower surface oil and higher OS compared to the microcapsules produced by using CSG and CPI individually. CSO microcapsules produced by using CSG as wall material had lowest MEE (67.3%) and oxidative stability index (OSI=6.6h), whereas CPI-CSG complex coacervate microcapsules had the highest MEE (93.9%) and OSI (12.3h). The MEE and OSI of microcapsules produced by using CPI as wall materials were in between those produced by using CSG and CPI-CSG complex coacervates as wall materials. The CSO microcapsules produced by using CPI-CSG complex coacervate as shell matrix at core-to-wall ratio of 1:2 had 6 times longer storage life compared to that of unencapsulated CSO. The peroxide value of CSO microcapsule produced using CPI-CSG complex coacervate as wall material was <10meq O2/kg oil during 30 days of storage.

Microencapsulation of omega-3 fatty acids: a review of microencapsulation and characterization methods

To improve consumption of omega-3 fatty acids, foods can be enriched with omega-3 rich oils. Microencapsulation of omega-3 oils minimizes oxidative deterioration and allows their use in stable and easy-to-handle form. Microencapsulation of omega-3 fatty acids can be achieved by using a variety of methods, with the two most commonly used commercial processes being complex coacervation and spray dried emulsions. A variety of other methods are in development including spray chilling, extrusion coating and liposome entrapment. The key parameter in any of these processes is the selection of wall material. For spray dried emulsions and complex coacervates protein or polysaccharides are primarily used as shell material, although complex coacervation is currently commercially limited to gelatin. Here we review the need for microencapsulation of omega-3 oils, methods of microencapsulation and analysis, and the selection of shell material components. In particular, we discuss the method of complex coacervation, including its benefits and limitations. This review highlights the need for research on the fundamentals of interfacial and complexation behaviour of various proteins, gums and polyphenols to encapsulate and deliver omega-3 fatty acids, particularly with regard to broadening the range of shell materials that can be used in complex coacervation of omega-3 rich oils.

Physicochemical and microbial analysis of feces from horses fed diets containing citrus pulp.

This study aimed to evaluate the e ect of diets containing increasing levels of citrus pulp on the physic-chemical and microbiological characteristics of horses feces. Five mares, at an average age of 3.5 years old and body weight of 492 ± 44.5 kg were arranged in a 5 x 5 Latin Square. The experimental diet consisted of 60% coast-cross hay and 40 % of concentrate with increasing levels of citrus pulp (0, 7, 14, 21, and 28 %). To determine the fecal pH, samples were collected directly from the oor, immediately after defecation, in the rst feces the day at 07:00 a.m., and color and fecal consistency were evaluated. For microbiological analysis, an aliquot was reserved in plastic bags, frozen, and sent to the microbiological laboratory for further analysis. Lactic acid bacteria were counted for Lactobacillus spp. and Streptococcus spp. from fecal samples under anaerobic conditions. The diet produced di erences (P<0.05) in feces consistency 98% had normal and rm stools, while 2% had loose ruminant-type feces. We observed no di erence (P<0.05) for color, verifying 100% of greenish feces, normal for equines. There was no e ect (P>0.05) on pH and on the number of Lactobacillus spp. and Streptococcus spp. The inclusion of up to 28% citrus pulp concentrates for horses did not promote change in the physio-chemical characteristics and on the population of lactic acid-producing bacteria in feces.

Effect of autochthonous starter cultures in the production of "Paio", a traditional Portuguese dry- cured sausage

Traditional dry-cured sausages are highly appreciated in Mediterranean countries. The aim of the present study was to evaluate the effect of different starter cultures in the sausages Alentejano pig meat was used to prepare drycured sausages in a local factory. Staphylococcus xylosus, Lactobacillus sakei and a yeast strain were inoculated at a concentration of 106 cfu/g meat batter both in separate and in mixed culture. Three independent batches with two replicates per treatment were produced. Samples were collected throughout the ripening process. pH and aw were determined according to the ISO standards. Microbiological counts of total mesophiles, total psycrotrophs, anaerobes, coagulase-negative staphylococci (CNS), lactic acid bacteria (LAB), enterobacteria, yeasts and moulds and Listeria monocytogenes were done according to the respective ISO standards, as well as detection of Salmonella spp. Biogenic amines quantification was performed by HPLC as described by Roseiro et al. (1). The treatment with L. sakei alone was the most effective in reducing the contamination level both with Salmonella spp. and L. monocytogenes, however this effect seems to be lost in the mixed cultures. The presence of the yeast strain seems to increase the levels of phenylethylamine and histamine. The contents in cadaverine, putrescine and tyramine were generally lower in the inoculated sausages. Regarding tyramine, the treatments with L. sakei showed significantly lower values. No significant differences between treatments were observed for both spermine and spermidine.

Brain-derived neurotrophic factor (BDNF) gene : no major impact on antidepressant treatment response

The brain-derived neurotrophic factor (BDNF) has been suggested to play a pivotal role in the aetiology of affective disorders. In order to further clarify the impact of BDNF gene variation on major depression as well as antidepressant treatment response, association of three BDNF polymorphisms [rs7103411, Val66Met (rs6265) and rs7124442] with major depression and antidepressant treatment response was investigated in an overall sample of 268 German patients with major depression and 424 healthy controls. False discovery rate (FDR) was applied to control for multiple testing. Additionally, ten markers in BDNF were tested for association with citalopram outcome in the STAR*D sample. While BDNF was not associated with major depression as a categorical diagnosis, the BDNF rs7124442 TT genotype was significantly related to worse treatment outcome over 6 wk in major depression (p=0.01) particularly in anxious depression (p=0.003) in the German sample. However, BDNF rs7103411 and rs6265 similarly predicted worse treatment response over 6 wk in clinical subtypes of depression such as melancholic depression only (rs7103411: TT

Assessment of commercial network RTK user positioning performance over long inter-station distances

The paper provides an assessment of the performance of commercial Real Time Kinematic (RTK) systems over longer than recommended inter-station distances. The experiments were set up to test and analyse solutions from the i-MAX, MAX and VRS systems being operated with three triangle shaped network cells, each having an average inter-station distance of 69km, 118km and 166km. The performance characteristics appraised included initialization success rate, initialization time, RTK position accuracy and availability, ambiguity resolution risk and RTK integrity risk in order to provide a wider perspective of the performance of the testing systems. ----- ----- The results showed that the performances of all network RTK solutions assessed were affected by the increase in the inter-station distances to similar degrees. The MAX solution achieved the highest initialization success rate of 96.6% on average, albeit with a longer initialisation time. Two VRS approaches achieved lower initialization success rate of 80% over the large triangle. In terms of RTK positioning accuracy after successful initialisation, the results indicated a good agreement between the actual error growth in both horizontal and vertical components and the accuracy specified in the RMS and part per million (ppm) values by the manufacturers. ----- ----- Additionally, the VRS approaches performed better than the MAX and i-MAX when being tested under the standard triangle network with a mean inter-station distance of 69km. However as the inter-station distance increases, the network RTK software may fail to generate VRS correction and then may turn to operate in the nearest single-base RTK (or RAW) mode. The position uncertainty reached beyond 2 meters occasionally, showing that the RTK rover software was using an incorrect ambiguity fixed solution to estimate the rover position rather than automatically dropping back to using an ambiguity float solution. Results identified that the risk of incorrectly resolving ambiguities reached 18%, 20%, 13% and 25% for i-MAX, MAX, Leica VRS and Trimble VRS respectively when operating over the large triangle network. Additionally, the Coordinate Quality indicator values given by the Leica GX1230 GG rover receiver tended to be over-optimistic and not functioning well with the identification of incorrectly fixed integer ambiguity solutions. In summary, this independent assessment has identified some problems and failures that can occur in all of the systems tested, especially when being pushed beyond the recommended limits. While such failures are expected, they can offer useful insights into where users should be wary and how manufacturers might improve their products. The results also demonstrate that integrity monitoring of RTK solutions is indeed necessary for precision applications, thus deserving serious attention from researchers and system providers.