Microstructure and mechanical properties of a novel Zr-based bulk metallic glass composite

Zr48.5Cu46.5Al5 bulk metallic glass (BMG) composites with diameters of 3 and,4 mm were prepared through suction casting in an arc melting furnace by modulating the alloy composition around the monothetic BMG composition of the high glass forming ability. Microstructural characterization reveals that the composites contain micron-sized CuZr phase with martensite structure, as well as nano-sized Zr2Cu crystalline particles and Cu10Zr7 plate-like phase embedded in an amorphous matrix. Room temperature compression tests showed that the composites exhibited significant strain hardening and obvious plastic strain of 7.7% for 3 nun and 6.4% for 4 nun diameter samples, respectively.

Microstructure and mechanical properties of Zr-Cu-Al bulk metallic glasses

Zr49Cu46Al5 and Zr48.5Cu46.5Al5 bulk metallic glasses(BMGs) with diameter of 5 mm were prepared through water-cooled copper mold casting. The phase structures of the two alloys were identified by X-ray diffractometry(XRD). The thermal stability was examined by differential scanning calorimetry(DSC). Zr49Cu46Al5 alloy shows a glass transition temperature, T, of about 689 K, an crystallization temperature, T-x, of about 736 K. The Zr48.5Cu46.5Al5 alloy shows no obvious exothermic peak. The microstructure of the as-cast alloys was analyzed by transmission electron microscopy(TEM). The aggregations of CuZr and CuZr2 nanocrystals with grain size of about 20 nm are observed in Zr49Cu46Al5 nanocrystalline composite, while the Zr48.5Cu46.5Al5 alloy containing many CuZr martensite plates is crystallized seriously. Mechanical properties of bulk Zr49Cu46Al5 nanocrystalline composite and Zr48.5Cu46.5Al5 alloy measured by compression tests at room temperature show that the work hardening ability of Zr48.5Cu46.5Al5 alloy is larger than that of Zr48.5Cu46.5Al5 alloy.

Synthesis Of Plastic Zr-Based Bulk Metallic Glass Matrix Composites By The Copper-Mould Suction Casting And The Bridgman Solidification

Zr-based bulk metallic glass matrix composites with the composition of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.(5) were synthesized by the copper-mould suction casting and the Bridgman solidification. The composite, containing a well-developed flowery beta-Zr dendritic phase, was obtained by the Bridgman solidification with the withdrawal velocity of 0.8 mm/s and the temperature gradient of 45 K/mm, and the ultimate strength of 2050 MPa and fracture plastic strain of 14.6% of the composite were achieved, which was mainly interpreted by the homogeneous dispersion of bcc beta-Zr phase in the glass matrix. Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

拟南芥有性生殖模式和叶片特性对大气CO2浓度变化的响应

预计到本世纪末，大气CO2浓度将会增加到540～970ppm，大气CO2浓度升高所引起的全球气候变化已经受到广泛的关注。植物生长依赖CO2，并且对大气CO2浓度升高在结构和生理上产生响应。目前已有大量报道，从生态系统、群落、种群、个体、器官、组织、生理以及生化等水平上研究高浓度CO2所对植物产生的影响。但是有关高浓度CO2对植物有性生殖影响的报道却很少，同时多数实验均建立在短期的生殖响应，忽视了植物在长期高CO2浓度下具有的反馈作用和CO2浓度变化对植物的驯化作用。植物有性生殖与其生态适应性和农作物籽粒产量的关系极为密切;同时，植物有性生殖特性的变化，也可作为预测植物对全球气候变化响应的重要指标之一。为此，利用高浓度CO2对植物进行长期选择实验将很有必要。研究结果将为预测未来大气CO2浓度增加的条件下陆地生态系统的演变趋势、全球变化对植物有性生殖响应的方式和机制提供新的思路和有效方法。 　　在本研究中，我们以模式植物拟南芥(Arabidopsis thaliana)作为实验材料，利用370和700ppm CO2对其进行连续8个世代处理，首先研究高浓度CO2对每一个世代的拟南芥有性生殖特性的影响，然后比较各个世代中各种生殖特性指标变化的规律，从细胞、组织和个体尺度上揭示拟南芥有性生殖对全球变化的响应模式。此外，在700ppm CO2处理下，我们对拟南芥叶片生理、生化以及结构的变化进行了相关研究。两部分研究结果及主要结论如下： 　　首先，在每一个世代中，与370ppm CO2相比较，700ppm CO2处理显著促进了拟南芥开花，缩短生长周期，增加花、角果及种子等生殖的产量，降低种子N含量，提高种子C/N比、种子千粒重以及生殖生物量所占总生物量的比例等，而对种子萌发率、角果所含种子数目以及角果长度则无显著影响。但是， 通过对相同CO2浓度处理条件下，不同世代之间的研究结果比较发现，不同世代之间相关的生殖生物学指标并无显著差异。 　　其次，高浓度CO2显著降低叶片气孔密度、气孔指数、气孔导度以及蒸腾速率。在高浓度CO2处理下，叶肉细胞中叶绿体数目、叶绿体宽度和表观面积、淀粉粒大小和数量、叶片和细胞壁厚度等都显著增加，但是基粒内囊体膜的数量却显著下降。叶片中碳水化合物如可溶性总糖、淀粉以及纤维素含量在高浓度CO2下分别显著增加71.9%、78.7% 和 22.3%。此外，在高浓度CO2处理下，叶片中多数激素如如吲哚乙酸(indole-3-acetic acid, IAA)、赤霉素(gibberellin, GA)、玉米素核苷(zeatin riboside, ZR)、二氢玉米素核苷(dihydrozeatin riboside, DHZR)和异戊烯基腺苷(isopentenyl adenosine, iPA)均都显著地增加，而脱落酸(abscisic acid, ABA)含量却有所下降。最后，叶片中各种矿物质元素含量如N、P、K、Ca和Mg等含量在高浓度CO2处理下也都显著下降，而C/N比增加24.8％。 　　以上结果表明： 　　(1) 在每一个世代中，700ppm CO2处理对拟南芥各种有性生殖特性具有显著的影响，但是高浓度CO2处理对植物所引起的效应在多个世代以内并不能够传递给后代，所以在多个有性生殖世代内，高浓度CO2处理对植物生长、生殖没有驯化作用。 　　(2) 在高浓度CO2处理下，拟南芥叶片中叶绿体超微结构的变化，可能主要是由于叶绿体中淀粉粒数量和体积大小显著增加而引起。 　　(3) 在高浓度CO2处理下，由于拟南芥叶片内与促进细胞分裂与伸长的激素含量显著增加，从而对拟南芥植株生长发育速率的提高起了重要的作用。 　　(4) 拟南芥生长在高浓度CO2条件下，其叶片中各种矿质元素含量（如N、P、K、Ca和Mg）均显著降低，究其原因可能是，第一由于叶片中碳水化合物含量的显著增加而对矿物质元素具有稀释作用;第二由于蒸腾速率下降，引起矿质元素从根部随着蒸腾流运输到地上部分的含量相应减少。 　　

Transport properties of Ca-doped YBCO coated conductors

The authors have doped RABiTS coated conductor tapes with Ca in an attempt to enhance the transport properties. By diffusing Ca into the YBCO film from a CaZrO3 overlayer, the authors have been able to preferentially dope the grain boundaries of the superconductor. Hence it has been possible to obtain doped tapes which do not have a significantly degraded T-c. The authors have measured the critical currents of doped and undoped samples over a wide range of temperature, magnetic field, and magnetic field angle in order to study the effect of Ca on the grain boundaries. The authors find that doping using short anneal times produces enhanced critical currents in large magnetic fields.

Electronic structures of wurtzite ZnO, BeO, MgO and p-type doping in Zn1-xYxO (Y = Mg, Be)

Using the density function theory within the generalized gradient approximation, the band structures of wurtzite ZnO, BeO and MgO have been calculated. The effective-mass parameters are fitted using the calculated eigenvalues. The Dresselhaus spin-orbit effect appears in the k[1 00] direction, and is zero in the high symmetry direction k[00 1]. The orderings of valence band split by the crystal-field and spin-orbit coupling in wurtzite ZnO, BeO and MgO are identified by analyzing the wave function characters calculated by projecting the wave functions onto p-state in the spherical harmonics. For wurtzite ZnO, the ordering of valence band is Still Gamma(7) > Gamma(9) > Gamma(7) due to the negative spin-orbit coupling splitting energy and the positive crystal-field splitting energy. Thus, the Thomas' conclusion is confirmed. For wurtzite BeO and MgO, although their orderings of valence bands are Gamma(7) > Gamma(9) > Gamma(7) too, the origins of their orderings are different from that of wurtzite ZnO. Zn1-x,YxO (Y = Mg, Be) doped with N and P atoms have been studied using first-principles method. The calculated results show that N atom doped in Zn1-x BexO has more shallow acceptor energy level with increasing the concentration of Be atom. (C) 2008 Elsevier B.V. All rights reserved.

Mg acceptor energy levels in AlxInyGa1-x-yN quaternary alloys: An approach to overcome the p-type doping bottleneck in nitrides

The Mg-Ga acceptor energy levels in GaN and random Al8In4Ga20N32 quaternary alloys are calculated using the first-principles band-structure method. We show that due to wave function localization, the MgGa acceptor energy level in the alloy is significantly lower than that of GaN, although the two materials have nearly identical band gaps. Our study demonstrates that forming AlxInyGa1-x-yN quaternary alloys can be a useful approach to lower acceptor ionization energy in the nitrides and thus provides an approach to overcome the p-type doping difficulty in the nitride system.

Effect on nitrogen acceptor as Mg is alloyed into ZnO

Our Raman measurement indicates that the intensity of the peaks (510 and 645 cm(-1)) related to nitrogen concentration is enhanced in MgZnO compared with that in ZnO. Using first-principles band structure methods, we calculated the formation energy and transition energy level for nitrogen acceptor in ZnO and random MgxZn1-xO (with x=0.25) alloy. Our calculations show that the incorporation of nitrogen can be enhanced as Mg is alloyed into ZnO, which agrees with our experiments. The acceptor energy level deeper in the alloy ascribes to the downward shift of the valence-band maximum edge in the presence of magnesium. (c) 2008 American Institute of Physics.

Band-gap bowing and p-type doping of (Zn, Mg, Be)O wide-gap semiconductor alloys: a first-principles study

Using a first-principles band-structure method and a special quasirandom structure (SQS) approach, we systematically calculate the band gap bowing parameters and p-type doping properties of (Zn, Mg, Be)O related random ternary and quaternary alloys. We show that the bowing parameters for ZnBeO and MgBeO alloys are large and dependent on composition. This is due to the size difference and chemical mismatch between Be and Zn(Mg) atoms. We also demonstrate that adding a small amount of Be into MgO reduces the band gap indicating that the bowing parameter is larger than the band-gap difference. We select an ideal N atom with lower p atomic energy level as dopant to perform p-type doping of ZnBeO and ZnMgBeO alloys. For N doped in ZnBeO alloy, we show that the acceptor transition energies become shallower as the number of the nearest neighbor Be atoms increases. This is thought to be because of the reduction of p-d repulsion. The N-O acceptor transition energies are deep in the ZnMgBeO quaternary alloy lattice-matched to GaN substrate due to the lower valence band maximum. These decrease slightly as there are more nearest neighbor Mg atoms surrounding the N dopant. The important natural valence band alignment between ZnO, MgO, BeO, ZnBeO, and ZnMgBeO quaternary alloy is also investigated.

Bioactivity of Mg-ion-implanted zirconia and titanium

Titanium and zirconia are bioinert materials lacking bioactivity. In this work, surface modification of the two typical biomaterials is conducted by Mg-ion-implantation using a MEVVA ion source in an attempt to increase their bioactivity. Mg ions were implanted into zirconia and titanium with fluences ranging from 1 x 10(17) to 3 x 10(17) ions/cm(2) at 40 keV. The Mg-implanted samples, as well as control (unimplanted) samples, were immersed in SBF for 7 days and then removed to identify the presence of calcium and phosphate (Ca-P) coatings and to characterize their morphology and structure by SEM, XRD, and FT-IR. SEM observations confirm that globular aggregates are formed on the surfaces of the Mg-implanted zirconia and titanium while no precipitates are observed on the control samples. XRD and FT-IR analyses reveal that the deposits are carbonated hydroxyapatite (HAp). Our experimental results demonstrate that Mg-implantation improves the bioactivity of zirconia and titanium. Further, it is found that the degree of bioactivity is adjustable by the ion dose. Mechanisms are proposed to interpret the improvement of bioactivity as a result of Mg implantation and the difference in bioactivity between zirconia and titanium. (c) 2006 Elsevier B.V. All rights reserved.

Synthesis and temperature-dependent near-band-edge emission of chain-like Mg-doped ZnO nanoparticles

Chain-like Mg-doped ZnO nanoparticles were prepared using a wet chemical method combined with subsequent heat treatment. The blueshifted near-band-edge emission of the doped ZnO sample with respect to the undoped one was investigated by temperature-dependent photoluminescence. Based on the energy shift of the free-exciton transition, a band gap enlargement of similar to 83 meV was estimated, which seems to result in the equivalent shift of the bound-exciton transition. At 50 K, the transformation from the donor-acceptor-pair to free-to-acceptor emissions was observed for both the undoped and doped samples. The results show that Mg doping leads to the decrease of the acceptor binding energy. (c) 2006 American Institute of Physics.

耐热Mg-Gd基合金的研究和应用

本研究从二元Mg-Gd体系出发，研究了添加不同稀土元素对Mg-Gd基合金的组织、时效行为和力学性能的影响。优化出多种力学性能优异、加工性能良好和耐热性突出的新型Mg-Gd-RE-Zn-Zr系合金。在探讨Mg-Gd基合金强化机理的同时，提出了强化模型，并进行了定量分析。 在Mg-Gd二元体系中，通过对不同Gd含量的合金组织，时效行为和力学性能的研究，发现Gd不仅可以细化晶粒，还可以细化枝晶。合金中Gd的含量大于8 wt.%开始表现出时效硬化现象，Gd含量超过12wt.％时效硬化效果显著。在二元体系研究结果的基础上，选用Mg-8Gd基合金，研究了不同轻稀土元素LRE(La, Ce和Nd)和重稀土元素HRE (Y, Dy, Ho 和Er)对合金组织和性能的影响。结果表明，轻稀土中Nd的作用效果最好，其次为Ce和La。重稀土中Y和Dy的作用效果较好，其次为Ho和Er。将轻、重稀土综合考虑，在Mg-8Gd-3RE(Nd+Y)-Zr合金中，变化Nd和Y的添加量，发现Nd和Y的添加量分别为1 和2或2和1时，能够明显改善合金的综合力学性能。 研究了Mg-8Gd-2Y-1Nd-0.3Zn和Mg-8Gd-1Dy-0.3Zn压铸合金的组织和性能。研究表明，两种合金的铸造性能好，而且具有优异的抗拉性能和蠕变性能，可以满足在250℃~275℃环境下使用。进一步研究了挤压变形Mg-8Gd-2Y-1Nd-0.3Zn合金。合金成形性能好，抗拉强度和伸长率明显提高，而且改善了合金的高温抗蠕变性能，比压铸合金提高了近一个数量级。 发明了一种新型的分步固溶处理方法——振荡热处理方法，这种方法比传统的T6热处理方法更加有效，振荡热处理的主要作用是改变了凝固过程中析出相的尺寸和分布。 研究了Mg-Gd基合金凝固过程中的相析出和相转变。在合金的凝固过程中，容易生成块状的化学组成为Mg5RE（fcc结构）的共晶相；加入Zn后，凝固中容易出现片状的Mg3RE（14H型）沉淀；时效强化的主要原因是在过饱和固溶体时效过程中析出针状的50 nm~100 nm的Mg15RE3相，它与基体具有半共格的位相关系，能够有效阻止位错滑移。但随着时效时间的延长，针状析出相长大，共格关系被破坏，导致强化作用降低。而对于压铸和挤压变形合金，合金析出相的种类不变，主要的不同是挤压变形合金析出化合物的分布更加均匀，尺寸更小。 开发了高强度耐热Mg-12Gd-4Y-2Nd-0.4Zn-0.6Zr合金，这种合金经过热处理后，力学性能优良，热稳定性突出。在300 ℃的抗拉强度约为300 MPa，400 ℃的抗拉强度在100 MPa以上。本合金流动性能良好，适合于砂型铸造，在具有高温、高强度要求的镁合金制品方面极具潜力。 从金属材料强化原理出发，建立了Mg-Gd基合金的强化模型，并进行了定量分析。结果表明，析出强化是Mg-Gd基合金的主要强化方式，但实际试验值和理论值略有偏差，分析认为主要是由于β'相体积分数的变化区间较宽，且合金制备过程中不可避免地产生一些微观缺陷所致。 采用新型合金制备出了一些工业用品部件，探索了该类合金在机械、汽车和高技术等工业领域中的潜在应用

CA-100萃取稀土及二价金属的热力学和动力学研究

该文系统研究了一种新型有机羧酸类萃取剂仲壬基苯氧基乙酸(CA-100)对稀土及其杂质的萃取热力学和动力学规律,并通过协同萃取、双溶剂萃取、加入络合剂等手段对CA-100萃取体系进行改善,为该萃取剂在工业上的应用打下基础,具体的研究内容如下:1.研究了CA-100对于稀土及Zn,Cd,Cu,Co,Ni,Mn,Mg等金属元素的萃取热力学规律,计算了金属间分离系数,获得了萃取平衡方程式,考察了反萃性能及稀释剂和甲庚醇的加入对萃取的影响.研究发现该萃取剂可用于Sc同其它稀土的分离及某些金属对的分离,在很多方面优于环烷酸体系.2.探讨了CA-100与—盐基磷(膦)酸类萃取剂对锌和镉的协同萃取,研究了协同萃取机理,确定了协萃配合物的组成.3.研究了在络合试剂的存在下CA-100萃取重稀土的行为及Y同重稀土的分离情况.4.用恒流层界面池研究了CA-100萃取Y,Yb,La的萃取动力学,考察了各因素对萃取速率的影响,获得了萃取速率方程,探讨了动力学机理.5.探讨了各种因素对CA-100界面活性的影响.6.在上述热力学和动力学研究基础上,进行了CA-100从混合稀土溶液中富集和纯化Sc的工艺模拟实验.

玫瑰花芽分化期矿质元素和内源激素的变化规律

本文以沈阳市于洪区玫瑰种植示范区内多季花冷香玫瑰和单季花平阴玫瑰为研究对象，通过野外采样并测定了两者在花芽分化期矿质元素（P、K、Ca、Mg、Fe、Zn、B、Mn、Cu）和内源激素（IAA、GA、ZR、ABA）的含量，并对其含量及比值变化进行分析，初步确定了玫瑰花芽分化与元素、激素之间的相互关系。研究结果将为玫瑰花期的化学调控、提高产花量和正确制定栽培技术措施提供理论依据，也为玫瑰进一步开发利用打下基础。主要结论：1．在冷香玫瑰和平阴玫瑰的整个花芽分化期，P、K、Cu、Zn大体上均呈下降趋势，表明它们可能参与玫瑰成花；ca、Mg在冷香玫瑰和平阴玫瑰的花蕾形成期含量都下降，可能意味着ca、Mg参与两者的花蕾形成；Fe与玫瑰花芽分化关系不大；高含量的B和Mn有利于两者花蕾形成。2．在冷香玫瑰和平阴玫瑰花蕾形成期，IAA和GA出现低水平，ZR和ABA出现高水平，激素比值（ABA/GA，ABA／IAA，ZR/GA，ZR/IAA）出现高水平，表明ABA和ZR促进两者开花；而IAA和GA抑制两者开花；高比例的（ABA/GA，ABA/IAA，ZR/GA，ZR/IAA）有利于两者开花。