Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Análise estatística da vida em fadiga de compósitos estruturais pela distribuição de Weibull

Nowadays technological trend is based on finding materials that could support low weight with satisfactory mechanical properties and for this reason composite material became a very attractive topic in research projects all over the world. Due to its heterogenic properties, this type of material shows scatter in mechanical test results, especially in cyclic loading. Therefore it is important to predict its fatigue strength behaviour by statistic analysis, once fatigue causes approximately 90% of the failure in structural components. The present work aimed to investigate the fatigue behaviour of the Twill/Cycom 890 composite, which is carbon fiber reinforced with polymeric resin as matrix and manufactured via RTM process (Resin Transfer Molding). All samples were tested in different tensile level in triplicate in order to associate these values. The statistical analysis was conducted with Two-Parameter Weibull Distribution and then evaluated the fatigue life results for the composite. Weibull graphics were used to determine the scale and shape parameters. The S-N curve for the Twill/Cycom composite was drawn and indicated the number of cycles to occur the first damages in this material. The probability of failure was associated with material reliability, as shown in graphics for the different tensile levels and fatigue life. In addition, the laminate was evaluated by ultrasonic inspection showing a regular impregnation. The fractographic analysis conducted by SEM showed failure mechanisms for polymeric composites associated to cyclic loadings ... (Complete abstract click electronic access below)

Analise mecânica e microestrutural em estruturas tubulares aeronáuticas soldadas de aço ABNT 4130

Airplane Motor Cradles have a complex geometry, since they require different conbinations between different tubes and TIG welded in several angles. In T-25 aircraft and Universal T-27 Tucano (EMBRAER / FAB), besides having to bear the engine balance, these components maintain fixed the nose landing gear in another extremity. They are considered critical to flight safety, and for this reason, the aviation standards are extremely rigid in their production, imposing a zero index” of defects on the final weld metal quality. These structures may be containing an historical of welding repairs, whose effects on their structural integrity are not computed. In this work we analyzed the standardised AISI 4130 steel and the raw steel of tubes to the Airplane Motor Cradles. First of all, microscopy and microanalysis of the base steel, then we analyzed the effects of the TIG weld. Tensile testing was conducted to measure the difference between the mechanical properties of standardised steel and without this treatment

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Análise do comportamento em fadiga de rodas ferroviárias fabricadas pelos processos de forjamento e fundição

Since the beginning of the railway industry until today, rail wheels are important components to the good working of a railway. For being a critical security item, design and maintenance are done with extremely care to avoid failures. Despite de fact of railway components be projected to support a big number of cyclic solicitation during its life, some accidents still occur. These accidents, despite the low frequency, always have great consequences, drawing in great financial, material, and people losses. Nowadays, railway component failure is relatively low, because it’s been projected to work below the materials Fatigue Resistance Limit, however, with the growing demand of faster trains and higher load for each axle, the occurrence probability is even bigger. This work includes a comparative study of two fabrication processes (casting and forging) applied in the production of rail wheels where it was measured the mechanical properties of traction and fatigue. The study also verified through microstructural analysis, hardness, traction and fatigue tests, statistical analysis of fatigue test results and fractographic analysis that forging process lead to better correlations between fatigue life and mechanical properties, providing more security in railroads, less wagon retention caused by corrective maintenance and smaller operational cost with its use

Avaliação da percepção de professores do departamento de produção e alunos do quinto ano do curso de Engenheira de Produção mecânica da Unesp de Guaratinguetá de como está o curso em relação às competências e habilidades para engenheiros

In 2002, the Ministry of Education (MEC) published the Curriculum Guidelines for Engineering courses in the country. The Guidelines contain subjects like the profile of graduates, the course structure, curriculum, internships and skills and abilities, all geared to guide the training of engineers in Brazil. The objective of this study is to evaluate together with teachers of the Production Department of this University and students of the fifth year of Production Engineering is how student learning of Production Engineering for the development and importance of skills within the course and skills for engineers who are present in the Curriculum Guidelines for engineering courses developed by MEC

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

Contagem automatizada de veículos utilizando segmentação estatística

In this work was developed a program capable of performing automatic counting of vehicles on roads. The problem of counting vehicles is using expensive techniques for its realization, techniques which often involve manual counting or degradation of the pavement. The main motivation for this work was the importance that the vehicle counting represents to the Traffic Engineer, being essential to analyze the performance of the roads, allowing to measure the need for installation of traffic lights, roundabouts, access ways, among other means capable of ensuring a continuous flow and safe for vehicles. The main objective of this work was to apply a statistical segmentation technique recently developed, based on a nonparametric linear regression model, to solve the segmentation problem of the program counter. The development program was based on the creation of three major modules, one for the segmentation, another for the tracking and another for the recognition. For the development of the segmentation module, it was applied a statistical technique combined with the segmentation by background difference, in order to optimize the process. The tracking module was developed based on the use of Kalman filters and application of simple concepts of analytical geometry. To develop the recognition module, it was used Fourier descriptors and a neural network multilayer perceptron, trained by backpropagation. Besides the development of the modules, it was also developed a control logic capable of performing the interconnection among the modules, mainly based on a data structure called state. The analysis of the results was applied to the program counter and its component modules, and the individual analysis served as a means to establish the par ameter values of techniques used. The find result was positive, since the statistical segmentation technique proved to be very useful and the developed program was able to count the vehicles belonging to the three goal..

Projeto DMAIC com ferramentas six sigma para redução de custos logísticos de uma multinacional

This work has a focus on project execution DMAIC ( Define Measure Analyze Implement Control) , using the statistical and quality tools to identify , analyze and implement improvements in a given process in order to reduce costs telephony transport of a multinational consumer goods . The multinational consumer goods to be studied has outsourced carriers who perform the distribution of its products , which may lead them straight to their factories or one of its distribution centers to the points of sale ( supermarkets , bakeries , gas stations , convenience cafeterias , among others ) . Whenever there is an unexpected situation or some problem at the time of delivery of the goods to the customer opens an occurrence , ie , the carrier responsible for contacts ( 0800 ) with the contact center company of consumer goods which in turn registers the occurrence, analyzes and sends a response action to the carrier . This work will study the problem with a high number of connections to handle occurrence , through analysis and data collection , identify improvement opportunities, implement them and monitor the results to ensure that the gain and loss reduction are sustainable

Análise dos fatores de desempenho do ENADE: estudo parao curso de engenharia de produção mecânica

This work has the propose to discuss the National Examination Performance of students for the course in Production Engineering , from 2005 up to 2011, subsidies are shown how this came about assessment and how the course has been evaluated in recent years . Compares higher education from public and private universities in Brazil and is also discussed how important a good performance in the exam. Qualitative and quantitative surveys were conducted at different times that the work that enables a critical analysis of the examination , the institution and also the students themselves , so the list is the main motivators for the exam and also what should be done to obtaining good results in academic performance. Motivators for the exam has highlighted its importance is paramount and the consent of all involved from the beginning of the course to ensure that the examination is compulsory for all graduates of undergraduate manufacturing engineering in Brazil

Ciclo PDCA e ferramentas da qualidade em operações e serviços de e-commerce

The market has forced companies to maintain high levels of control over their processes , ensuring a product or service quality to its customers . This study comes in the issuance and registration carried out in a company of e-commerce , which is showing problems with the values of weights and dimensions used in the cases cited . The need to eliminate wasteful spending freight caused by shipment of products weighing more than the reality, and to increase the reliability of the information used in the management of processes led to the planning of this project . This work focuses on the development of a PDCA cycle to work in the identification and correction of the causes of the problem , in order to neutralize the current complications and ensure that the problem does not appear again. To aid the mapping of the processes involved , identifying the causes of the problem and implementation of the proposed improvements were used quality tools such as flowcharts , Ishikawa diagrams , Pareto diagrams , and applied statistics

Flexão e análise dinâmico-mecânica de compósitos 5HS e NCF com resina epóxi monocomponente produzidos por RTM

In order to study resin distribution and homogeneity of composite laminates manufactured by RTM, it was used CYCOM 890 monolithic toughened epoxy as a matrix with two different configurations of intermediated modulus (IM) carbon fibers: Satin Weave (5HS) and non crimp fabric (NCF). The injection parameters were defined based on Thermo Gravimetric Analysis (TG), Differential Scanning Calorimetry (DSC) and rheological analysis. After processing the material, the resin/fiber impregnation was studied using ultrasonic test, Thermo Gravimetric Analysis, Differential Scanning Calorimetry, Dynamic Mechanical Analysis (DMA) and flexural tests. Therefore, it was able to observe an internal residual stress during the cooling process in both laminates, higher in the composite using NCF fabric due to the lack of symmetry, although a good proportion of fiber/matrix has been verified by the lower values of flexural modulus deviation. The DMA enabled the visualization of glass transition and its association with the inter and intra molecular interaction and movement, in which the NCF composite presented better permeability due to the lowest temperature of glass transition, when compared to the Satin Weave composite

Efeito de diferentes espessuras, técnicas de aplicação e protocolos de resfriamento na resistência à fratura da cerâmica de cobertura aplicada sobre infraestrutura de y-tzp

Pós-graduação em Odontologia Restauradora - ICT

Variabilidade espacial dos atributos físicos e químicos em um gleissolo mecânico sob três áreas no município Arari - MA

Pós-graduação em Agronomia (Ciência do Solo) - FCAV