Modelling effects of axial load on behaviour of pile groups in laterally-spreading soil

Previous research into the behaviour of piled foundations in laterally-spreading soil deposits has concentrated on pile groups that carry small or negligible axial loads. This paper presents dynamic centrifuge test results for 2 x 2 pile groups with bending and geometric properties similar to real 0.5 m diameter tubular steel and solid circular reinforced-concrete field piles. Axial loads applied represented upper-bounds on typical working loads. The simultaneous scaling of the relevant properties controlling both lateral and axial behaviour allows comparisons to be drawn regarding the particular mechanisms of failure that would dominate for each type of pile. Flexible reinforced-concrete piles which tend to carry lower loads were found to be dominated by lateral effects, while steel piles, which are much stiffer and usually carry greater loads are dominated by settlement considerations. © 2006 Taylor & Francis Group.

Bacterial load in pond water and different organs of a Indian major carp Cirrhinus mrigala Ham.

During the study period (August, 1993 to July,l994) the mean bacterial load in surface water was found to vary from 1.39 xl05 (July'94) to 3.llxl07CFU/ml (September'93), while that of botrom water ranged from l.Olxl06 (May'94) to 5.90xl07CFU/ml (October '93). The mean total number of bacterial load in body slime, liver and kidney was found to vary from 0.58xl03 (July'94) to 2.37xl07CFU/g (March'94),from 0.22xl03(July'94)to 9.64xl06 CFU/g (March'94) from O.l5xl03 (July'94) to 9.36xl06 CFU/g (March'94), respectively. Bacterial load in slime was significantly correlated with bacterial load in liver, bacterial load in slime was significantly correlated with bacterial load in kidney and bacterial load in liver was significantly correlated with bacterial load in kidney.

Quantitative and qualitative assessment of plankton: some ecological aspect and water quality parameters of the river Meghna, Bangladesh

Investigation on the seasonal distribution and abundance of various major taxa of phyto and zooplankton and the corresponding physico-chemical characteristics were carried out in four selected stations between the latitude 22°35.494N N-23°23.987 N and longitude 90°35.793 E- 90°49.061 E of the Meghna river system, Bangladesh. Drop count method was followed for the qualitative and quantitative analysis of both phyto- and zooplankton. A total of 41 phytoplankton genera belonging to 17 families and 13 zooplankton genera belonging to 11 families were recorded. Zooplankton growth cycle was noticeably less (3.0%) than the phytoplankton abundance almost throughout the study period. Quantity of plankton registered to increase chronologically from the upper to lower stretches of the river. During summer investigation the load of phytoplankton was recorded maximum (11,300-51,850 No/1). Ratio-wise quantitative difference between zoo- and phytoplankton in composition of the total standing crop fluctuated between 1.0:5.5 and 1:1037. Among the phytoplanktonic groups, Chlorophyceae was found to be dominating (95.0%) in all sampling stations. Protococcus, a single genus of Chlorophyceae played a unique role during summer, contributing the highest density of about 74.0%. The pattern of qualitative and quantitative difference of plankton standing crop in different sampling sites can be attributed to the existing physico-chemical characteristics, mainly water temperature, pH and hardness.

Portable electronic warp load meter

A portable type warp load meter has been developed for the use in fishing trawlers. The instrument enables to monitor the warp load in fishing trawlers accurately and easily without disturbing the routine fishing operations. The instrument can be used in several other places like cranes, bollard tests for marine engines, dry docks etc. especially when the operation has to be conducted easily without disturbing the load system. The information displayed in micro ammeter in the range 0 to 1000 kg can be fed to continuous recorders for detailed analysis and permanent records.

Response of extract release volume to the variations in pH and microbial load during spoilage of fish at refrigeration temperature

This report briefly describes the microbial status and storage properties of fish raised under composite fish culture in sewage fed ponds.

Preservation of Sardinella longiceps in iced and chilled seawater. Part 1 - Changes during storage with particular reference to bacterial load and nitrogenous compounds

Oil sardines in prime condition were subjected to onboard chilling. Two lots were chilled in CSW (samples C and CI), a third lot was chilled in crushed ice (sample I) and a fourth lot left not iced on deck (Sample AI). Upon landing sample AI was iced and sample CI was removed from the CSW and iced. All the four samples were kept in a chilled room for storage studies. The fish chilled and stored in CSW recorded the least, and the fish subjected to delayed icing, the highest values for all the indices of spoilage namely, free amino nitrogen, trimethylamine (TMA) and total volatile base nitrogen (TVBN). The total psychrophilic bacterial number also showed a similar trend. The organoleptic assessment of the cooked samples revealed C I, CI, AI to be the order of preference throughout the storage. This assessment was found to hold good for the rest of the parameters as well. The CSW held fishes were found to be distinctly superior to the iced ones for the first five days of storage. Such a marked prevalence in quality for five days would suffice for the fish to fetch a premium in the market over other landings of the same fish whether chilled or not chilled. Chilling on board in CSW and icing the same after landings, did not show encouraging results.

Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials

A constitutive equation is developed for geometrically-similar sharp indentation of a material capable of elastic, viscous, and plastic deformation. The equation is based on a series of elements consisting of a quadratic (reversible) spring, a quadratic (time-dependent, reversible) dashpot, and a quadratic (time-independent, irreversible) slider-essentially modifying a model for an elastic-perfectly plastic material by incorporating a creeping component. Load-displacement solutions to the constitutive equation are obtained for load-controlled indentation during constant loading-rate testing. A characteristic of the responses is the appearance of a forward-displacing "nose" during unloading of load-controlled systems (e.g., magnetic-coil-driven "nanoindentation" systems). Even in the absence of this nose, and the associated initial negative unloading tangent, load-displacement traces (and hence inferred modulus and hardness values) are significantly perturbed on the addition of the viscous component. The viscous-elastic-plastic (VEP) model shows promise for obtaining material properties (elastic modulus, hardness, time-dependence) of time-dependent materials during indentation experiments.

Estimating material elasticity by spherical indentation load-relaxation tests on viscoelastic samples of finite thickness

A two-step viscoelastic spherical indentation method is proposed to compensate for 1) material relaxation and 2) sample thickness. In the first step, the indenter is moved at a constant speed and the reaction force is measured. In the second step, the indenter is held at a constant position and the relaxation response of the material is measured. Then the relaxation response is fit with a multi-exponential function which corresponds to a three-branch general Maxwell model. The relaxation modulus is derived by correcting the finite ramp time introduced in the first step. The proposed model takes into account the sample thickness, which is important for applications in which the sample thickness is less than ten times the indenter radius. The model is validated numerically by finite element simulations. Experiments are carried out on a 10% gelatin phantom and a chicken breast sample with the proposed method. The results for both the gelatin phantom and the chicken breast sample agree with the results obtained from a surface wave method. Both the finite element simulations and experimental results show improved elasticity estimations by incorporating the sample thickness into the model. The measured shear elasticities of the 10% gelatin sample are 6.79 and 6.93 kPa by the proposed finite indentation method at sample thickness of 40 and 20 mm, respectively. The elasticity of the same sample is estimated to be 6.53 kPa by the surface wave method. For the chicken breast sample, the shear elasticity is measured to be 4.51 and 5.17 kPa by the proposed indentation method at sample thickness of 40 and 20 mm, respectively. Its elasticity is measured by the surface wave method to be 4.14 kPa. © 2011 IEEE.

Quality assessment of traditional and solar tunnel dried SIS (Small Indigenous Fish Species) products

Studies were conducted to assessment the quality of traditional and solar tunnel dried SIS products. The moisture content of the solar products ranged from 14.38 to 18.48% with the lowest in batashi and the highest value in tengra. The moisture content of the traditional products was in the range of 23.26 to 26.42%. The range of protein contents on moisture free basis was from 67.57 to 71.90% in solar dried fishes with highest value obtained in dhela and lowest value in batashi. These values were more or less similar to those of traditional dried SIS products which were in the range of 68.02 to 73.54% on dry weight basis. Lipid contents of solar dried SIS varied from 14.10 to 16.26% and on moisture free basis the in the range of 11.73 to 21.98 with highest value found in tengra and lowest in puti. These values were more or less similar to those found for traditional dried products on dry weight basis and ranged from were 12.37 to 22.43%. Maximum reconstitution of solar dried products was obtained at 80°C in all samples and was in the range of 65.26 to 70.51% where the percentage of reconstitution increases with the increase of socking time and reach maximum at the end of up to 60 min. The TVB-N content of solar dried fish is low compared with traditional one ranging from 20.30 to 28.40mg/100g and peroxide value in the range of 12. 54 to 19.20meq./kg oil. The TVB-N of traditionally dried products were in the range of 32.50 to 45.45mg/100g and PO values of the traditionally dried products were in the range of 30.00 to 36.00meq./kg oil. The bacterial load of the solar dried products was in the range of 4.0x10 super(3)/g to 3.6x10 super(5)CFU/g and of the traditionally dried products ranged from 1.45x10 super(5) to 2.52x10 super(6) CFU/g.

Quality assessment of traditional, rotary and solar tunnel dried small indigenous fish species products

Studies on the quality assessments of three traditional, rotary and solar tunnel dried SIS products were conducted. Organoleptic quality of traditional dried SIS products available in the markets was poor compared to those produced in rotary and solar tunnel dryer. Reconstitution of samples were in the range of 54.26% to 75.24%, 69.37% to 83.73% and 55.08% to 80.24% when soaked at 80°C for traditional, rotary and solar tunnel dried products, respectively. The percentage of reconstitution increased with the increase of soaking time and the uptake of water was maximum after 60 min of soaking. The moisture contents of traditional, rotary and solar tunnel dried products were in the range of 26.02% to 27.33%, 16.23% to 22.84% and 13.71% to 19.30%, respectively. The protein contents were in the range of 60.78% to 72.59%, 62.17% to 76.27% and 61.11% to 76.00%, respectively; lipid contents were in the range of 12.26% to 22.60%, 14.00% to 24.71% and 13.92% to 22.39%, respectively and ash contents in the range of 15.11% to 16.59%, 8.32% to 13.51% and 8.71% to 16.45%, respectively on dry matter basis. The TVB-N content of rotary and solar tunnel dried products was low compared to traditional one ranging from 10.64 to 17.52 mg/100g and 14.34 to 15.68 mg/100g, respectively whereas the TVB-N content of traditional samples was in the range of 15.46 to 20.36 mg/100g. The bacterial load of traditional, rotary and solar tunnel dried products were in the range of 1.43x10 super(8) CFU/g to 2.89 x10 super(80 CFU/g, 1.91x10 super(8) CFU/g to 2.84x10 super(8) CFU/g and 1.95x10 super(8) CFU/g to 2.59x10 super(8) CFU/g, respectively. The results of the study indicated that dried fish products from rotary dryer and solar tunnel dryer were found to be of better quality in nutritional and food quality aspects than those of traditional dried products.

Organoleptic, biochemical and bacteriological aspects of the low cost tunnel dried fish products

Studies were conducted on the organoleptic, biochemical and bacteriological aspects of three dried fish products produced from two different model of low cost solar tunnel dryer. The overall quality of the products obtained from both dryers was excellent. Sixty minutes soaking showed the maximum water reconstitution of the products with values between 66.82 to 75.28% and 71.98 to 78.09% in dryer 1 & 2 respectively. The highest reconstitution was obtained from Silver Jew fish (75.28-78.09%) and lowest from Bombay duck (66.86-71.98%) from both dryers. The average moisture, protein, lipid and ash content of the dried products were 11.8-15.0%, 57.32-68.49%, 6.08-8.62% and 12.25-14.88% respectively in fish in dryer 1 and dryer 2. The TVB-N values were in the range of 24.3 to 30.9 in dryer 1 and 22.1 to 28.2 mg/100 g samples in dryer 2. The highest values were obtained from Bombay duck and lowest value in Silver Jew fish in both dryers. The peroxide values varied from 14.1 to 16.9% in dryer 1 and 13.3 to 16.4% in dryer 2. The highest peroxide value was obtained from Ribbon fish and lowest from Silver Jew fish. Total bacterial load varied in the range of 6.6x10⁴— 8.6x10⁴ CFU/g in dryer 1 and 2.54x10⁴ to 4.9x10⁴ CFU/g in dryer 2. The highest value was obtained from Ribbon fish and lowest from Silver Jew fish.