Foreign direct investment and employment in Central Europe

This article investigates the effects of foreign direct investment on employment generation in Central Europe. Foreign affiliates operate as a buffer to reductions in overall employment and show significant cross-country differences. A model analyzing the contribution of foreign direct investment to restructuring is developed. This model helps interpret the empirical evidence on the link between foreign direct investment and employment in Central Europe. Increasing differentiation in employment between manufacturing industries dominated by foreign affiliates suggests the importance of diversified sources of foreign direct investment for employment generation and preservation. A disaggregate analysis indeed reveals a much more complex and differentiated role of foreign direct investment in employment preservation, employment generation and structural change than the aggregate picture would suggest. This diversity has important policy implications for attracting and upgrading foreign direct investment.

Future challenges for manufacturing

Purpose - This Editorial Viewpoint explores what changes are taking place in manufacturing technology management with the aim of identifying future challenges that should be represented in the scope of JMTM. Design/methodology/ approach - The viewpoints use an analysis of relevant articles in JMTM, published since 2007, which have focused on future challenges for manufacturing. It also draws on two recent reports. Findings - While the analysis confirms the inclusion of some subjects already in the journal scope, there are elsewhere gaps that merit it being expanded. Research limitations/implications - Evidence for the findings is only from a limited number of articles identified in this journal together supplemented by other secondary sources. Practical implications - There are implications for practice concerning the future of manufacturing from the analysis and the sources used, especially the reports. Originality/value - Although it has limitations, the article is based on original bibliographic research. Copyright © 2014 Emerald Group Publishing Limited. All rights reserved.

Manufacturing process challenges when machining superalloys

The implementation of advanced manufacturing systems with high process capability is an essential requirement for the high value manufacturing industries. To ensure high process capability, industry needs to deal with the requirement for tight tolerances and the unavoidable variations in materials, and manufacturing and inspection processes. In the case of machining superalloys, such variations result in the need to change the machine parameters for producing different batches of materials from different suppliers. This is required in order to get the process under control and reduce waste and defects, leading to better competitiveness. This papers discuss the variability in materials and the corresponding process requirements when machining superalloys, and highlights the impact of metrology in achieving manufacturing process improvement.

Spatial patterns of manufacturing clusters in Vietnam

The formation of industrial clusters is critical for sustained economic growth. We identify the manufacturing clusters in Vietnam, using the Mori and Smith (2013) method, which indicates the spatial pattern of industrial agglomerations using the global extent (GE) and local density (LD) indices. Spatial pattern identification is extremely helpful because industrial clusters are often spread over a wide geographical area and the GE and LD indices—along with cluster mapping—display how the respective clusters fit into specific spatial patterns.

Spatial structures of manufacturing clusters in Cambodia, Lao People's Democratic Republic, and Thailand

Examining the spatial structure of clusters is essential for deriving regional development policy implications. In this study, we identify the manufacturing clusters in Cambodia, the Lao People's Democratic Republic, and Thailand, using two indices—global extent (GE) and local density (LD)—as proposed by Mori and Smith (2013). We also analyze four different combinations of these indices to highlight the spatial structures of industrial agglomerations. Since industrial clusters often spread over administrative boundaries, the GE and LD indices—along with cluster mapping—display how the detected clusters fit into specific spatial structures.

An investigation of environmental conditions experienced during the life of high-value wood components and products

Australian forest industries have a long history of export trade of a wide range of products from woodchips (for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in temperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe (including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design.

Economic impact of political protests (strikes) on manufacturing firms : evidence from Bangladesh

Political protests in the form of strikes, locally known as hartal, remain quite common in the Indian subcontinent countries. Such a form of protests is associated with mass movement, intended to cause a total shutdown of economic activities and often results in coercion, violence, and damage to both public and private properties. Utilizing the World Bank Enterprise survey data of 2007 and 2013 of Bangladesh, this study examines the impacts of hartals on manufacturing firms. We find that political protests significantly increase costs for firms. Using flexible cost function based on factor analysis we see that the factor-neutral effect of strikes is positive and statistically significant, showing evidence of a reduction in firm productivity due to hartals. However, we did not find any evidence for systematic factor re-optimization by firms – in response to political strikes – suggesting that firms do not reallocate factor shares to tackle uncertain and irregular shocks like hartals.

¬FISH DISTRIBUTIONS IN LAKE ONTARIO’S EASTERN BASIN AND THE UPPER ST. LAWRENCE RIVER: AN ANALYSIS USING GIS AND OCCUPANCY MODELLING TECHNIQUES

Predictive models of species distributions are important tools for fisheries management. Unfortunately, these predictive models can be difficult to perform on large waterbodies where fish are difficult to detect and exhaustive sampling is not possible. In recent years the development of Geographic Information Systems (GIS) and new occupancy modelling techniques has improved our ability to predict distributions across landscapes as well as account for imperfect detection. I surveyed the nearshore fish community at 105 sites between Kingston, Ontario and Rockport, Ontario with the objective of modelling geographic and environmental characteristics associated with littoral fish distributions. Occupancy modelling was performed on Round Goby, Yellow perch, and Lepomis spp. Modelling with geographic and environmental covariates revealed the effect of shoreline exposure on nearshore habitat characteristics and the occupancy of Round Goby. Yellow Perch, and Lepomis spp. occupancy was most strongly associated negatively with distance to a wetland. These results are consistent with past research on large lake systems indicate the importance of wetlands and shoreline exposure in determining the fish community of the littoral zone. By examining 3 species with varying rates of occupancy and detection, this study was also able to demonstrate the variable utility of occupancy modelling.

Innovación social: una reflexión sobre los beneficios en su implementación en el Estado colombiano.

La innovación social es un tipo de innovación que promueve la búsqueda de soluciones enfocadas a los problemas que se presentan en la sociedad. Estas soluciones generan además un valor agregado que ayudan al crecimiento del país. En Colombia este tipo de iniciativas han empezado a tener una gran importancia y han empezado a promover condiciones de vida más favorables y justas que buscan generar un beneficio a la sociedad y contribuir al desarrollo del país. A partir de la historia de la innovación social, ejemplos y grandes literatos en la administración y la sociología, comprenderemos la importancia de la innovación en nuestro país.

The same river twice

This article reviews an exhibition of art works at the Institute for Modern Art that dealt with the idea of history. The review suggests that history is an unstable product of our collective imaginations and is constantly open to revisions and individual perspectives. Each of the artists deal with these issues by reinterpreting past events. The artists were Pierre Huyghe, Thomas Demand, Mike Kelley, paul McCarthy, Jeremy Deller, Danius Kesminas, Gerard Byrne, Emma Kay, and Omer Fast.

Key performance indicators for innovation implementation : perception vs. actual usage

This paper aimed to explore the proportion associated with the perceived importance and the actual use of performance indicators from manufacturing and non manufacturing industries. The sample was 86 small and medium sized-organizations in Thailand. The perceived importance and the actual use of financial and non financial indicators were found to be significantly related among manufacturing and non manufacturing industries. KPI 3, 9, and 12 (i.e. sales and sales growth; quality of products and /or services; and process time) were perceived the most importance among manufacturing managers (85.3%, 79.4% and 76.5% respectively). While KPI 6, 9, and 12 (i.e. customer satisfaction, quality of products and /or services; and process time) were perceived the most importance among non manufacturing managers (84.8%, 93.5%, and 84.8% respectively). Interestingly, the most used KPIs for manufacturing were sales and sales growth (64.7%); profit margins (61.8%); and customer satisfaction (84.8) while non manufacturing used quality products/services (60.9%); sales and sales growth (54.3%) and employee development (54.3%) respectively. Limitation and implication were also discussed.

Wrapped fragments : Drapery, the eighteenth century portrait bust and the male subject

The depiction of drapery (generalised cloth as opposed to clothing) is a well-established convention of Neo-Classical sculpture and is often downplayed by art historians as of purely rhetorical value. It can be argued however that sculpted drapery has served a spectrum of expressive ends, the variety and complexity of which are well illustrated by a study of its use in portrait sculpture. For the Neo-Classical portrait bust, drapery had substantial iconographic and political meaning, signifying the new Enlightenment notions of masculine authority. Within the portrait bust, drapery also served highly strategic aesthetic purposes, alleviating the abruptness of the truncated format and the compromising visual consequences of the “cropped” body. With reference to Joseph Nollekens’ portraits of English statesman Charles James Fox and the author’s own sculptural practice, this paper analyses the Neo-Classical use of drapery to propose that rendered fabric, far from mere stylistic flourish, is a highly charged visual signifier with much scope for exploration in contemporary sculptural practice.

On Gloves

This article explores the historical symbolic meanings of gloves.

Outsourcing strategies for radical innovations: does industry clockspeed make a difference?

Purpose – To determine whether or not clockspeed is an important variable in outsourcing strategies throughout the development of radical innovations. Design/methodology/approach – An internet-based survey of manufacturing firms from all over the world. Findings – An industry's clockspeed does not play a significant role in the success or failure of a particular outsourcing strategy for a radical innovation. Research limitations/implications – Conclusions from earlier research in this area are not necessarily industry-specific. Practical implications – Lessons learned via previous investigations about the computer industry need not be confined to that sector. Vertical integration may be a more robust outsourcing strategy when developing a radical innovation in industries of all clockspeeds. Originality/value – Previous research efforts in this field focused on a single technology jump, but this approach may have overlooked a potentially important variable: industry clockspeed. Thus, this investigation explores whether clockspeed is an important factor.

designing creative clusters : some indicators

This paper explores how the design of creative clusters as a key strategy in promoting the urban creative economy has played out in Shanghai. Creative Clusters in Europe and North America context have emerged ‘organically’. They developed spontaneously in those cities which went through a period of post-industrial decline. Creative Industries grew up in these cities as part of a new urban economy in the wake of old manufacturing industries. Artists and creative entrepreneurs moved into vacant warehouses and factories and began the trend of ‘creative clusters’. Such clusters facilitate the transfer of tacit knowledge through informal learning, the efficient sourcing of skills and information, competition, collaboration and learning, inter-cluster trading and networking. This new urban phenomenon was soon targeted by local economic development policy in charge of re-generating and re-structuralizing industrial activities in cities. Rising interest from real estate and local economic development has led to more and more planned creative clusters. In the aim of catching up with the world’s creative cities, Shanghai has planned over 100 creative clusters since 2005. Along with these officially designed creative clusters, there are organically emerged creative clusters that are much smaller in scale and much more informal in terms of the management. And they emerged originally in old residential areas just outside the CBD and expand to include French concession the most sort after residential area at the edge of CBD. More recently, office buildings within CBD are made available for creative usages. From fringe to CBD, these organic creative clusters provide crucial evidences for the design of creative clusters. This paper will be organized in 2 parts. In the first part, I will present a case study of 8 ‘official’ clusters (title granted by local govenrment) in Shanghai through which I am hoping to develop some key indicators of the success/failure of creative clusters as well as link them with their physical, social and operational efficacies. In the second part, a variety of ‘alternative’ clusters (organicly formed clusters most of which are not recongnized by the government) supplies with us the possibilities of rethinking the so-called ‘cluster development strategy’ in terms of what kind of spaces are appropriate for use by clusters? Who should manage them and in what format? And ultimately what are their relationship with the rest of the city should be defined?