Literature review of elasmobranch bycatch and retention rate

To address growing concern over the effects of fisheries non-target catch on elasmobranchs worldwide, the accurate reporting of elasmobranch catch is essential. This requires data on a combination of measures, including reported landings, retained and discarded non-target catch, and post-discard survival. Identification of the factors influencing discard vs. retention is needed to improve catch estimates and to determine wasteful fishing practices. To do this we compared retention rates of elasmobranch non-target catch in a broad subset of fisheries throughout the world by taxon, fishing country, and gear. A regression tree and random forest analysis indicated that taxon was the most important determinant of retention in this dataset, but all three factors together explained 59% of the variance. Estimates of total elasmobranch removals were calculated by dividing the FAO global elasmobranch landings by average retention rates and suggest that total elasmobranch removals may exceed FAO reported landings by as much as 400%. This analysis is the first effort to directly characterize global drivers of discards for elasmobranch non-target catch. Our results highlight the importance of accurate quantification of retention and discard rates to improve assessments of the potential impacts of fisheries on these species.

Groundfish survey data from the German Bight from 1902-08, 1919-23, and 1930-1932 and ICES International Bottom Trawl Survey (IBTS) quarter 3 data from 1991 to 2009

Groundfish survey data from the German Bight from 1902-08, 1919-23, and 1930-1932 and ICES International Bottom Trawl Survey (IBTS) quarter 3 data from 1991 to 2009 were analysed with respect to species frequencies, maximum length, trends in catch-per-unit-effort, species richness parameters (SNR) and presence of large fish (Phi40), the latter defined as average presence of species per haul with specimens larger than 40 cm given. Four different periods are distinguished: (a) before 1914 with medium commercial CPUE and low landings, Phi40 approx. 2, high abundance in elasmobranchs and SNR conditions indicating highly diverse assemblages, (b) conditions immediately after 1918 with higher commercial CPUE, recovering landings, Phi40 at > 4 in 1919, and SNR conditions indicating highly diverse assemblages, (c) conditions from 1920 to the early 1930's with decreasing commercial CPUE, increased landings, decreasing Phi40, SNR conditions similar to later years indicating less diverse assemblages, and a decrease in elasmobranchs. In the IBTS series (d), Phi40 remains low indicating an increased rarity of large specimens, and SNR characteristics are similar to the third period. Dab, whiting and grey gurnard have increased considerably in the IBTS series as compared to the historic data. Phi40 is suggested an alternative indicator reflecting community functional diversity when weight based indicators cannot be applied.

Long term low latitude and high elevation cosmogenic 3He production rate inferred from a 107 ka-old lava flow in northern Chile; 22°S-3400 m a.s.l

Available geological calibration sites used to estimate the rate at which cosmogenic 3He is produced at the Earth’s surface are mostly clustered in medium to high latitudes. Moreover, most of them have exposure histories shorter than tens of thousands of years. This lack of sites prevents a qualitative assessment of available production models used to convert cosmogenic 3He concentrations into exposure ages and/or denudation rates. It thus limits our ability to take into account the atmospheric, geomagnetic and solar modulation conditions that might have affected the production of cosmogenic nuclides in the past for longer exposure histories and in low latitude regions. We present the cosmogenic 3He production rate inferred from a new geological calibration site located in northern Chile. Five samples were collected on the surface of the largest and best-preserved lava flow of the San Pedro volcano (21.934°S-68.510°W- 3390 m a.s.l), which displays pristine crease-structure features. 40Ar/39Ar dating yield a reliable plateau age of 107±12 ka for the eruption of this lava flow. Eight pyroxene aliquots separated from the surface samples yield a weighted average cosmogenic 3He concentration of 99.3±1.2 Mat.g-1 from which a local cosmogenic 3He production rate of 928±101 at.g-1.yr-1 is calculated. The local production rate is then scaled to a sea level high latitude (SLHL) reference position using different combinations of geographic spatialization schemes, atmosphere models and geomagnetic field reconstructions, yielding SLHL production rates between 103±11 and 130±14 at.g-1.yr-1 consistent with the most recent estimates available from the literature. Finally, we use the same scaling frameworks to re-evaluate the mean global-scale cosmogenic 3He production rate in olivine and pyroxene minerals at 120±16 at.g-1.yr-1 from the compilation of previously published calibration datasets.

Low workforce participation of educated female and the role of work organizations in post-war Sri Lanka

Sri Lanka as a developing economy that achieved gender equity in education and a higher literacy rate (both adult and youth) in the South Asian region still records a low labor force participation and high unemployment rate of females when compared to their male counterparts. With the suggestion of existing literature on the non-conventional models of careers those adopted by young and female populations at the working age, this paper discusses the role of work organizations in absorbing more females (and even minority groups) into the workforce. It mainly focuses on the need of designing appropriate human resource strategies and reforming the existing organizational structures in order for contributing to the national development in the post-war Sri Lanka economy.

Modelization of low cycle fatigue damage in frames

Damage models based on the Continuum Damage Mechanics (CDM) include explicitly the coupling between damage and mechanical behavior and, therefore, are consistent with the definition of damage as a phenomenon with mechanical consequences. However, this kind of models is characterized by their complexity. Using the concept of lumped models, possible simplifications of the coupled models have been proposed in the literature to adapt them to the study of beams and frames. On the other hand, in most of these coupled models damage is associated only with the damage energy release rate which is shown to be the elastic strain energy. According to this, damage is a function of the maximum amplitude of cyclic deformation but does not depend on the number of cycles. Therefore, low cycle effects are not taking into account. From the simplified model proposed by Flórez-López, it is the purpose of this paper to present a formulation that allows to take into account the degradation produced not only by the peak values but also by the cumulative effects such as the low cycle fatigue. For it, the classical damage dissipative potential based on the concept of damage energy release rate is modified using a fatigue function in order to include cumulative effects. The fatigue function is determined through parameters such as the cumulative rotation and the total rotation and the number of cycles to failure. Those parameters can be measured or identified physically through the haracteristics of the RC. So the main advantage of the proposed model is the possibility of simulating the low cycle fatigue behavior without introducing parameters with no suitable physical meaning. The good performance of the proposed model is shown through a comparison between numerical and test results under cycling loading.

A parametric, experimental analysis of conical vortices on curved roofs of low-rise buildings

Different methods to reduce the high suction caused by conical vortices have been reported in the literature: vertical parapets, either solid or porous, placed at the roof edges being the most analysed configuration. Another method for alleviating the high suction peaks due to conical vortices is the use of some non-standard parapet configuration like cantilever parapets. In this paper the influence of roof curvature on the conical vortex pattern appearing on a curved roof (Fig. 1) when subject to oblique winds is experimentally analysed by testing the mean pressure distribution on the curved roofs of low-rise building models in a wind tunnel. Also, the efficiency of cantilever parapets to reduce mean suction loads on curved roofs is experimentally checked. Very high suction loads have been measured on curved roofs, the magnitude of these high suction loads being significantly decreased when cantilever parapets are used. Thus, the suitability of these parapets to reduce wind pressure loads on curved roofs is demonstrated.

Haptic teleoperation of mobile robots for augmentation of operator perception in environments with low-wireless signal

Wireless teleoperation of field robots for maintenance, inspection and rescue missions is often performed in environments with low wireless connectivity, caused by signal losses from the environment and distance from the wireless transmitters. Various studies from the literature have addressed these problems with time-delay robust control systems and multi-hop wireless relay networks. However, such approaches do not solve the issue of how to present wireless data to the operator to avoid losing control of the robot. Despite the fact that teleoperation for maintenance often already involves haptic devices, no studies look at the possibility of using this existing feedback to aid operators in navigating within areas of variable wireless connectivity. We propose a method to incorporate haptic information into the velocity control of an omnidirectional robot to augment the operators perception of wireless signal strength in the remote environment. In this paper we introduce a mapping between wireless signal strength from multiple receivers to the force feedback of a 6 Degree of Freedom haptic master and evaluate the proposed approach using experimental data and randomly generated wireless maps

Age regression from soft aligned face images using low computational resources

The initial step in most facial age estimation systems consists of accurately aligning a model to the output of a face detector (e.g. an Active Appearance Model). This fitting process is very expensive in terms of computational resources and prone to get stuck in local minima. This makes it impractical for analysing faces in resource limited computing devices. In this paper we build a face age regressor that is able to work directly on faces cropped using a state-of-the-art face detector. Our procedure uses K nearest neighbours (K-NN) regression with a metric based on a properly tuned Fisher Linear Discriminant Analysis (LDA) projection matrix. On FG-NET we achieve a state-of-the-art Mean Absolute Error (MAE) of 5.72 years with manually aligned faces. Using face images cropped by a face detector we get a MAE of 6.87 years in the same database. Moreover, most of the algorithms presented in the literature have been evaluated on single database experiments and therefore, they report optimistically biased results. In our cross-database experiments we get a MAE of roughly 12 years, which would be the expected performance in a real world application.

Characterization of a Low-Molecular-Weight Glutenin Subunit Gene from Bread Wheat and the Corresponding Protein That Represents a Major Subunit of the Glutenin Polymer1

Both high- and low-molecular-weight glutenin subunits (LMW-GS) play the major role in determining the viscoelastic properties of wheat (Triticum aestivum L.) flour. To date there has been no clear correspondence between the amino acid sequences of LMW-GS derived from DNA sequencing and those of actual LMW-GS present in the endosperm. We have characterized a particular LMW-GS from hexaploid bread wheat, a major component of the glutenin polymer, which we call the 42K LMW-GS, and have isolated and sequenced the putative corresponding gene. Extensive amino acid sequences obtained directly for this 42K LMW-GS indicate correspondence between this protein and the putative corresponding gene. This subunit did not show a cysteine (Cys) at position 5, in contrast to what has frequently been reported for nucleotide-based sequences of LMW-GS. This Cys has been replaced by one occurring in the repeated-sequence domain, leaving the total number of Cys residues in the molecule the same as in various other LMW-GS. On the basis of the deduced amino acid sequence and literature-based assignment of disulfide linkages, a computer-generated molecular model of the 42K subunit was constructed.

Consumer Driven Health Care: An Examination of the Disadvantages to Low Income Employees

As health care costs for companies continue to rise, more organizations are considering a consumer driven health plan option with the goal to engage employees so that they make better health care decisions. Although consumer driven health plan options present advantages to the employer and some employee groups, low income employees are negatively impacted by this option. Two major disadvantages include missed care and out of pocket obligations. This capstone reviews the current literature on consumer driven health care and discusses the disadvantages to low income employees. It also provides strategies and recommendations to employers who are considering a consumer driven health option plan to minimize the disadvantages to low income employees.

Convergence analysis and validation of low cost distance metrics for computational cost reduction of the Iterative Closest Point algorithm

The Iterative Closest Point algorithm (ICP) is commonly used in engineering applications to solve the rigid registration problem of partially overlapped point sets which are pre-aligned with a coarse estimate of their relative positions. This iterative algorithm is applied in many areas such as the medicine for volumetric reconstruction of tomography data, in robotics to reconstruct surfaces or scenes using range sensor information, in industrial systems for quality control of manufactured objects or even in biology to study the structure and folding of proteins. One of the algorithm’s main problems is its high computational complexity (quadratic in the number of points with the non-optimized original variant) in a context where high density point sets, acquired by high resolution scanners, are processed. Many variants have been proposed in the literature whose goal is the performance improvement either by reducing the number of points or the required iterations or even enhancing the complexity of the most expensive phase: the closest neighbor search. In spite of decreasing its complexity, some of the variants tend to have a negative impact on the final registration precision or the convergence domain thus limiting the possible application scenarios. The goal of this work is the improvement of the algorithm’s computational cost so that a wider range of computationally demanding problems from among the ones described before can be addressed. For that purpose, an experimental and mathematical convergence analysis and validation of point-to-point distance metrics has been performed taking into account those distances with lower computational cost than the Euclidean one, which is used as the de facto standard for the algorithm’s implementations in the literature. In that analysis, the functioning of the algorithm in diverse topological spaces, characterized by different metrics, has been studied to check the convergence, efficacy and cost of the method in order to determine the one which offers the best results. Given that the distance calculation represents a significant part of the whole set of computations performed by the algorithm, it is expected that any reduction of that operation affects significantly and positively the overall performance of the method. As a result, a performance improvement has been achieved by the application of those reduced cost metrics whose quality in terms of convergence and error has been analyzed and validated experimentally as comparable with respect to the Euclidean distance using a heterogeneous set of objects, scenarios and initial situations.

German companies strengthen their cooperation with Russian gas suppliers. OSW Commentary No. 64, 2011-10-24

Germany’s decision to give up the use of nuclear energy will force it to find a conventional low-carbon energy source as a replacement; in the short term, in addition to coal, this is likely to be gas. Due to their continued high debt and the losses associated with the end of atomic power, German companies will not be able to spend large funds on investing in conventional energy. First of all, they will aim to raise capital and repay their debts. The money for this will come from selling off their less profitable assets; this will include sales on the gas market. This will create opportunities for natural gas exporters and extraction companies such as Gazprom to buy back some of the German companies’ assets (electricity companies, for example). The German companies will probably continue to seek to recover the costs incurred in the investment projects already underway, such as Nord Stream, the importance of which will grow after Russian gas imports increase. At the same time, because of their debts, the German companies will seek to minimise their investment costs by selling some shares on the conventional energy market, to Russian corporations among others; the latter would thus be able to increase their stake in the gas market in both Western (Germany, Great Britain, the Benelux countries) and Central Europe (Poland, the Czech Republic). It is possible that while establishing the details of cooperation between the Russian and German companies, Russia will try to put pressure on Germany to give up competing projects such as Nabucco. However, a well-diversified German energy market should be able to defend itself against attempts to increase German dependence on Russian gas supplies and the dictates of high prices.

The Fall of the East German Birth Rate After Unification: Crisis or Means of Adaptation? CES Germany & Europe Working Papers, No. 05.6, 26 June 1995

Since the fall of the Wall, Eastern Germans have drastically changed their demographic behavior. Marriages and births have dropped to an unprecedented low level. Our paper tracks birth rates of the East German population, past, present, and future. We propose a simulation model of future cohort fertility. The hypotheses we develop build on the historical record of reproductive behavior in the German Democratic Republic (GDR) since 1960 and on an analysis of the pattern of change between 1990 and 1994. The particular emphasis lies in the assumption that East German couples will rapidly westernize their family size by trying to reach completed fertility levels of the corresponding West German cohort. This implies that the resulting adaptation process includes the postunification crisis as a logical first step.

The Grundgesetz After 50 Years: Analyzing Changes in the German Constitution. CES Germany & Europe Working Papers, No. 09.3, December 1999

Fifty years after its original drafting, the German constitution has seen its text amended many times. Indeed, among OECD countries, the Grundgesetz has one of the highest rates of constitutional change. This paper analyzes these changes. It does so in a quantitative manner in its first section, before proceeding to ask how the numerous changes can be explained. Three approaches from the legal and political science literature are presented: one emphasizing historical-structural factors, one analyzing changes as constitutional revisionism, and an institutional approach which focuses on the conditions for constitutional amendment. The strengths and weaknesses of each approach are then compared and contrasted, before the article concludes with an assessment of the characteristics of Gemuw constitutional policy.