An organic ionic plastic crystal electrolyte for rate capability and stability of ambient temperature lithium batteries

Reliable, safe and high performance solid electrolytes are a critical step in the advancement of high energy density secondary batteries. In the present work we demonstrate a novel solid electrolyte based on the organic ionic plastic crystal (OIPC) triisobutyl(methyl)phosphonium bis(fluorosulfonyl)imide (P1444FSI). With the addition of 4 mol% LiFSI, the OIPC shows a high conductivity of 0.26 mS cm-1 at 22 °C. The ion transport mechanisms have been rationalized by compiling thermal phase behaviour and crystal structure information obtained by variable temperature synchrotron X-ray diffraction. With a large electrochemical window (ca. 6 V) and importantly, the formation of a stable and highly conductive solid electrolyte interphase (SEI), we were able to cycle lithium cells (LiLiFePO4) at 30 °C and 20 °C at rates of up to 1 C with good capacity retention. At the 0.1 C rate, about 160 mA h g-1 discharge capacity was achieved at 20 °C, which is the highest for OIPC based cells to date. It is anticipated that these small phosphonium cation and [FSI] anion based OIPCs will show increasing significance in the field of solid electrolytes.

Rare earth 4-hydroxycinnamate compounds as carbon dioxide corrosion inhibitors for steel in sodium chloride solution

A series of rare earth 4-hydroxycinnamate compounds including Ce(4OHCin)3, La(4OHCin)3, and Pr(4OHCin)3 has been synthesized and evaluated as novel inhibitors for carbon dioxide corrosion of steel in CO2-saturated sodium chloride solutions. Electrochemical measurements and surface analysis have shown that these REM(4OHCin)3 compounds effectively inhibited CO2 corrosion by forming protective inhibiting deposits that shut down the active electrochemical corrosion sites on the steel surface. Inhibition efficiency was found to increase in the order Ce(4OHCin)3 < La(4OHCin)3 < Pr(4OHCin)3 and with increase in inhibitor concentration up to 0.63 mM. Detailed insights into corrosion inhibition mechanism of these compounds in carbon dioxide environment are also provided.

Roles of additives in the trihexyl(tetradecyl) phosphonium chloride ionic liquid electrolyte for primary mg-air cells

As reported previously, water saturated trihexyl(tetradecyl)phosphonium chloride ([P6,6,6,14][Cl]) ionic liquid (IL) is a promising electrolyte for magnesium-air batteries. The added water plays an important role in enabling high rate and high efficiency Mg dissolution while stabilizing the Mg interphase. In this work, the role of the water was investigated by replacement with other additives such as toluene and tetrahydrofuran to specifically target the assumed roles of water, namely: (i) enhancement of transport properties; (ii) complexation and stabilization of the Mg anode; (iii) provision of active protons for the cathodic reaction. Discharge tests show that ethylene glycol supports comparable performance to that provided by water. Examination of the viscosity and conductivity of different [P6,6,6,14][Cl]/additive mixtures indicates that a simple consideration of solution characteristics cannot explain the observed trends. Rather, other factors, such as the presence of active protons and/or oxygen-donor groups, are also key features for the development of IL electrolytes for practical magnesium-air cells. Finally, the presence of ethylene glycol in the electrolyte results in a complex gel on the Mg interface, similar to that found in the presence of water. This may also play a role in enabling stable discharge of the Mg anode. © 2014 The Electrochemical Society.

Lithium storage in disordered graphitic materials: a semi-quantitative study of the relationship between structure disordering and capacity.

The application of the graphitic anode is restricted by its low theoretical specific capacity of 372 mA h g(-1). Higher capacity can be achieved in the graphitic anode by modifying its structure, but the detailed storage mechanism is still not clear. In this work, the mechanism of the lithium storage in a disordered graphitic structure has been systematically studied. It is found that the enhanced capacity of the distorted graphitic structure does not come from lithium-intercalation, but through a capacitive process, which depends on the disordering degree and the porous structure.

Sulfur-impregnated, sandwich-type, hybrid carbon nanosheets with hierarchical porous structure for high-performance lithium-sulfur batteries

Sandwich-type hybrid carbon nanosheets (SCNMM) consisting of graphene and micro/mesoporous carbon layer are fabricated via a double template method using graphene oxide as the shape-directing agent and SiO2 nanoparticles as the mesoporous guide. The polypyrrole synthesized in situ on the graphene oxide sheets is used as a carbon precursor. The micro/mesoporous strcutures of the SCNMM are created by a carbonization process followed by HF solution etching and KOH treatment. Sulfur is impregnated into the hybrid carbon nanosheets to generate S@SCNMM composites for the cathode materials in Li-S secondary batteries. The microstructures and electrochemical performance of the as-prepared samples are investigated in detail. The hybrid carbon nanosheets, which have a thickness of about 10-25 nm, high surface area of 1588 m2 g-1, and broad pore size distribution of 0.8-6.0 nm, are highly interconnected to form a 3D hierarchical structure. The S@SCNMM sample with the sulfur content of 74 wt% exhibits excellent electrochemical performance, including large reversible capacity, good cycling stability and coulombic efficiency, and good rate capability, which is believed to be due to the structure of hybrid carbon materials with hierarchical porous structure, which have large specific surface area and pore volume.

Study on LiFe1 − xSmxPO4/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe1 − xSmxPO4/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp2-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO4 Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.

Lamotrigine compared with lithium in mania: a double-blind randomized controlled trial.

Preliminary data from case reports and small open trials suggest a role for lamotrigine in the treatment of bipolar disorder, although controlled data for the manic phase are lacking.

Olanzapine compared to lithium in mania: a double-blind randomized controlled trial.

Neuroleptics are of established efficacy in mania. Controlled data on the use of olanzapine in mania is however, absent. In this study, 30 patients meeting DSM-IV criteria for mania were randomly allocated to receive either olanzapine or lithium in a 4 week double-blind randomized controlled design. There were no significant outcome differences between the two groups on any of the primary outcome measures, the Brief Psychiatric Rating Scale (lithium 28.2; olanzapine 28.0; P = 0.44); Clinical Global Impression (CGI) improvement scale (lithium 2.75, olanzapine 2.36; P = 0.163) or the Mania Scale (lithium 13.2, olanzapine 10.2; P = 0.315). Olanzapine was however, significantly superior to lithium on the CGI-severity scale at week 4 (lithium 2.83, olanzapine 2.29; P = 0.025). Olanzapine did not differ from lithium in terms of treatment emergent extrapyramidal side-effects as measured by the Simpson-Angus Scale. Olanzapine appears to be at least as effective as lithium in the treatment of mania.

Lithium blocks 45Ca2+ uptake into platelets in bipolar affective disorder and controls.

The basal uptake of radiolabelled 45Ca2+ into platelets and the effect of 1 mM lithium on uptake was measured in manic (n = 13) and depressed (n = 15) patients with bipolar disorder and in controls (n = 13). Lithium was significantly associated with inhibition of uptake of 45Ca2+ into platelets in all three groups. There were no significant intergroup differences in either basal levels of calcium uptake or the effects of lithium on calcium uptake (analysis of variance).

Risperidone compared with both lithium and haloperidol in mania: a double-blind randomized controlled trial.

Case reports and studies of other neuroleptics suggest the efficacy of risperidone in the treatment of mania. Forty-five inpatients with DSM-IV mania were studied in a 28-day randomized, controlled, double-blind trial of either 6 mg daily of risperidone, 10 mg daily of haloperidol, or 800 to 1200 mg daily of lithium. The patients in all three groups showed a similar improvement on the total score for all rating scales at day 28 (Brief Psychiatric rating scale; lithium 9.1, haloperidol 4.9, risperidone 6.5, F = 1.01, df = 2, p = 0.37; Mania rating scale; lithium 15.7, haloperidol 10.2, risperidone 12.4, F = 1.07, df = 2, p = 0.35 [analysis of variance]). The Global Assessment of Functioning and Clinical Global Impression data showed a similar pattern of improvement. This study suggests that risperidone is of equivalent efficacy to lithium and haloperidol in the management of acute mania. The extrapyramidal side effects of risperidone and haloperidol were not significantly different.

Superiority of lithium over verapamil in mania: a randomized, controlled, single-blind trial.

Both case reports and small controlled studies suggest the efficacy of verapamil in the treatment of mania.

Large-scale production of h-In2O3/carbon nanocomposites with enhanced lithium storage properties

h-In2O3/carbon nanocomposites were obtained via a facile ball milling process from a mixture of h-In2O3 nanoparticles and Super P carbon. Compared to pure h-In2O3 nanoparticles, the nanocomposites exhibited an initial discharge capacity of 1360 mAh g-1, a stable reversible capacity of 867 mAh g-1 after 100 cycles as well as a high coulombic efficiency of 99%. The superior lithium-ion battery performance can be attributed to the specific structure of h-In2O3 and the uniform and continuous nano-carbon coating layers. The nano-carbon coating could protect the inner active materials from fragmentation and increase the electronic conductivity. This study not only provides a promising electrode material for high-performance lithium-ion batteries, but also further demonstrates a straightforward, effective and environmental friendly process for synthesizing nanocomposites. © 2014 Elsevier Ltd.

Enhanced lithium storage in ZnFe2O4-C nanocomposite produced by a low-energy ball milling

Preparation of novel nanocomposite structure of ZnFe2O4-C is achieved by combining a sol-gel and a low energy ball milling method. The crucial feature of the composite's structure is that sol-gel synthesised ZnFe2O4 nanoparticles are dispersed and attached uniformly along the chains of Super P Li™ carbon black matrix by adopting a low energy ball milling. The composite ZnFe2O4-C electrodes are capable of delivering a very stable reversible capacity of 681 mAh g-1 (96% retention of the calculated theoretical capacity of ∼710 mAh g-1) at 0.1 C after 100 cycles with a remarkable Coulombic efficiency (82%) improvement in the first cycle. The rate capability of the composite is significantly improved and obtained capacity was as high as 702 at 0.1, 648 at 0.5, 582 at 1, 547 at 2 and 469 mAh g-1 at 4 C (2.85 A g-1), respectively. When cell is returned to 0.1 C, the capacity recovery was still ∼98%. Overall, the electrochemical performance (in terms of cycling stability, high rate capability, and capacity retention) is outstanding and much better than those of the related reported works. Therefore, our smart electrode design enables ZnFe2O4-C sample to be a high quality anode material for lithium-ion batteries.

Preparation of composite electrodes with carbon nanotubes for lithium-ion batteries by low-energy ball milling

Some of the prospective electrode materials for lithium-ion batteries are known to have electronic transport limitations preventing them from being used in the electrodes directly. In many cases, however, these materials may become practical if they are applied in the form of nanocomposites with a carbon component, e.g. via incorporating nanoparticles of the phase of interest into a conducting network of carbon nanotubes. A simple way to prepare oxide-carbon nanotube composites suitable for the electrodes of lithium-ion batteries is presented in this paper. The method is based on low-energy ball milling. An electrochemically active but insulating phase of LiFeTiO4 is used as a test material. It is demonstrated that the LiFeTiO4-carbon nanotube composite is not only capable of having significantly higher capacity (∼105-120 mA h g-1vs. the capacity of ∼65-70 mA h g -1 for the LiFeTiO4 nanoparticles) at a slow current rate but may also operate at reasonably high current rates. © the Partner Organisations 2014.