L'intégration de la sexualité en consultation gynécologique : discordances entre les perceptions des femmes et celles des gynécologues.

Dès les années 2000, l'Office Fédéral de la Santé Publique recommande aux médecins de premier recours, dont les gynécologues, d'aborder activement la sexualité en consultation, en raison notamment de l'augmentation des infections sexuellement transmissibles asymptomatiques (1ST). Dans le même sens, comme le montrent nombre d'études, plus de 70% des patientes souhaiteraient être interrogées au sujet de leur sexualité en consultation gynécologique. Or, il semble que peu de médecins intègrent systématiquement des questions de sexualité dans leur anamnèse. La revue de la littérature relève que les recherches réalisées à ce jour ont été menées principalement à l'aide de questionnaire selon une perspective naturaliste, qui étudie la sexualité de manière décontextualisée et qui la conçoit comme un invariant biologique et par conséquent universel. Notre objectif est de saisir en profondeur les perceptions et le vécu des gynécologues et des femmes, face à l'intégration de la sexualité en consultation gynécologique. Nous avons adopté une perspective critique en psychologie de la santé (Santiago-Delefosse & Chamberlain, 2008 ; Murray, 2004a ; Lyons & Chamberlain, 2006) qui permet de privilégier d'une part, l'étude de la signification que les sujets donnent à la sexualité dans leur contexte socio-historique et, d'autre part, une vision de l'être humain comprenant des dimensions corporelles, psychologiques et sociétales (Santiago-Delefosse, 2011). Pour ce faire, nous avons utilisé un dispositif de méthodes mixtes en deux phases. Dans la première phase, nous avons mené 21 entretiens semi directifs avec des gynécologues hommes et femmes. Puis, nous avons réalisé 3 groupes focalisés (N=16) avec des femmes âgées de 23 à 65 ans. La seconde phase a consisté à créer un questionnaire, élaboré à partir des résultats de la première phase, afin d'élargir l'expérience de l'intégration de la sexualité en consultation, à une population plus diversifiée de femmes (N=421). Les données récoltées par le biais de ces trois méthodes nous ont permis d'esquisser un modèle présentant les processus en jeu dans la situation de non intégration de la sexualité en consultation gynécologique. Celui-ci relève non seulement des lacunes dans le cursus universitaire de médecine en matière de sexualité, mais également d'importantes discordances entre les gynécologues et les femmes interviewés concernant le rôle du gynécologue, la perception de l'intime, la perception d'introduire le sujet de la sexualité en consultation, ainsi que de la définition même de la sexualité. Nos résultats ouvrent sur des perspectives pratiques pour la consultation gynécologique, ainsi que sur des pistes pour des recherches futures dans l'étude de la sexualité, selon une perspective plus intégrative. -- Since the 2000's, the Swiss Federal Office of Public Health recommended primary care physicians, including gynaecologists, to actively address sexuality issues in consultation, namely because of the increasing incidence of Sexually Transmitted Infections (STI). In line with this, studies have shown that more than 70% of patients would like to be asked about their sexuality by their gynaecologist. However, physicians do not take systematically sexual histories from their patients. Literature in the field has highlighted that most research has been restricted to using questionnaires following a naturalist theoretical perspective according to which sexual behaviour is defined as biologically invariant, hence, universal. Our objective is to deepen understand perceptions from gynaecologists and women with regard to the integration of sexuality in consultations. A critical health psychology approach allows us to consider on the one hand sexuality as a construct that is inseparable from a given socio-historical context. On the other hand, this approach takes into consideration an embodied, social and psychological definition of human beings. Therefore, we used a mixed methods design that included two main research steps : First, we conducted 21 semi-structured interviews with male and female gynaecologists. In this phase, we also led 3 focus groups made up of 16 women aged from 21 to 65. Second, a survey was implemented (N= 421) based on findings stemming from the first phase. This allowed us to further analyse experiences on the integration of sexuality and to extend findings to a more diversified population of women. The data analysis allowed us to create a model that highlights the processes involved in the non integration of sexuality during gynaecological consultation. It shows a lack of training in sexology within medical programs. Moreover, it emphasises the mismatches on perceptions between gynaecologists and women concerning the gynaecologist's role ; intimacy, the issue of whether introducing sexuality topics, and finally, on the actual definition of sexuality itself. Our findings open new research perspectives for the study of sexuality by proposing a more integrative approach. They also provide practical and clinical perspectives concerning consultations in gynaecology.

A qualitative study about immigrant workers’ perceptions of their working conditions in Spain

Background: Spain has recently become an inward migration country. Little is known about the occupational health of immigrant workers. This study aimed to explore the perceptions that immigrant workers in Spain had of their working conditions.Methods: Qualitative, exploratory, descriptive study. Criterion sampling. Data collected between September 2006 and May 2007 through semi-structured focus groups and individual interviews, with a topic guide. One hundred and fifty-eight immigrant workers (90 men/68 women) from Colombia (n = 21), Morocco (n = 39), sub-Saharan Africa (n = 29), Romania (n = 44) and Ecuador (n = 25), who were authorised (documented) or unauthorised (undocumented) residents in five medium to large cities in Spain.Results: Participants described poor working conditions, low pay and health hazards. Perception of hazards appeared to be related to gender and job sector. Informants were highly segregated into jobs by sex, however, so this issue will need further exploration. Undocumented workers described poorer conditions than documented workers, which they attributed to their documentation status. Documented participants also felt vulnerable because of their immigrant status. Informants believed that deficient language skills, non-transferability of their education and training and, most of all, their immigrant status and economic need left them with little choice but to work under poor conditions.Conclusions: The occupational health needs of immigrant workers must be addressed at the job level, while improving the enforcement of existing health and safety regulations. The roles that documentation status and economic need played in these informants' work experiences should be considered and how these may influence health outcomes.

Chroma binary similarity and local alignment applied to cover song identification

We present a new technique for audio signal comparison based on tonal subsequence alignment and its application to detect cover versions (i.e., different performances of the same underlying musical piece). Cover song identification is a task whose popularity has increased in the Music Information Retrieval (MIR) community along in the past, as it provides a direct and objective way to evaluate music similarity algorithms.This article first presents a series of experiments carried outwith two state-of-the-art methods for cover song identification.We have studied several components of these (such as chroma resolution and similarity, transposition, beat tracking or Dynamic Time Warping constraints), in order to discover which characteristics would be desirable for a competitive cover song identifier. After analyzing many cross-validated results, the importance of these characteristics is discussed, and the best-performing ones are finally applied to the newly proposed method. Multipleevaluations of this one confirm a large increase in identificationaccuracy when comparing it with alternative state-of-the-artapproaches.

Development of Abutment Design Standards for Local Bridge Designs, Volume 1 of 3, Development of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume (this volume) summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Testing for local adaptation in brown trout using reciprocal transplants.

ABSTRACT: BACKGROUND: Local adaptation can drive the divergence of populations but identification of the traits under selection remains a major challenge in evolutionary biology. Reciprocal transplant experiments are ideal tests of local adaptation, yet rarely used for higher vertebrates because of the mobility and potential invasiveness of non-native organisms. Here, we reciprocally transplanted 2500 brown trout (Salmo trutta) embryos from five populations to investigate local adaptation in early life history traits. Embryos were bred in a full-factorial design and raised in natural riverbeds until emergence. Customized egg capsules were used to simulate the natural redd environment and allowed tracking the fate of every individual until retrieval. We predicted that 1) within sites, native populations would outperform non-natives, and 2) across sites, populations would show higher performance at 'home' compared to 'away' sites. RESULTS: There was no evidence for local adaptation but we found large differences in survival and hatching rates between sites, indicative of considerable variation in habitat quality. Survival was generally high across all populations (55% +/- 3%), but ranged from 4% to 89% between sites. Average hatching rate was 25% +/- 3% across populations ranging from 0% to 62% between sites. CONCLUSION: This study provides rare empirical data on variation in early life history traits in a population network of a salmonid, and large-scale breeding and transplantation experiments like ours provide powerful tests for local adaptation. Despite the recently reported genetic and morphological differences between the populations in our study area, local adaptation at the embryo level is small, non-existent, or confined to ecological conditions that our experiment could not capture.

Symbolic meaning of local identity – A case study on Barcelona place brand representation

The core objective of this research process was to design an operational tool for place brand analysis. By modelling the emotional significance and the deeper-lying symbols associated to a specific place identity I expected to create a semiotic tool that could be applied, mutatis mutandis, on other similar place brands. As a field case study to develop the instrument, my choice of the research arena was Barcelona city, the capital of Catalonia Autonomous Community, Spain. Barcelona brand identity was approached in the line of the Chicago Urban Anthropology School. The research methods were designed according to the prescriptions of the urban anthropology, namely qualitative methods: in-depth interviews and discourse analysis. The final research outcome was a model summarizing a range of specific emotional values that support a place brand to position in the collective mindset and to assume a positively valued status and identity in the world order.

Repeated exposure to Lutzomyia intermedia sand fly saliva induces local expression of interferon-inducible genes both at the site of injection in mice and in human blood.

During a blood meal, Lutzomyia intermedia sand flies transmit Leishmania braziliensis, a parasite causing tegumentary leishmaniasis. In experimental leishmaniasis, pre-exposure to saliva of most blood-feeding sand flies results in parasite establishment in absence of any skin damages in mice challenged with dermotropic Leishmania species together with saliva. In contrast, pre-immunization with Lu. intermedia salivary gland sonicate (SGS) results in enhanced skin inflammatory exacerbation upon co-inoculation of Lu. intermedia SGS and L. braziliensis. These data highlight potential unique features of both L. braziliensis and Lu. intermedia. In this study, we investigated the genes modulated by Lu. intermedia SGS immunization to understand their potential impact on the subsequent cutaneous immune response following inoculation of both SGS and L. braziliensis. The cellular recruitment and global gene expression profile was analyzed in mice repeatedly inoculated or not with Lu. intermedia. Microarray gene analysis revealed the upregulation of a distinct set of IFN-inducible genes, an immune signature not seen to the same extent in control animals. Of note this INF-inducible gene set was not induced in SGS pre-immunized mice subsequently co-inoculated with SGS and L. braziliensis. These data suggest the parasite prevented the upregulation of this Lu. intermedia saliva-related immune signature. The presence of these IFN-inducible genes was further analyzed in peripheral blood mononuclear cells (PBMCs) sampled from uninfected human individuals living in a L. braziliensis-endemic region of Brazil thus regularly exposed to Lu. intermedia bites. PBMCs were cultured in presence or absence of Lu. intermedia SGS. Using qRT-PCR we established that the IFN-inducible genes induced in the skin of SGS pre-immunized mice, were also upregulated by SGS in PBMCs from human individuals regularly exposed to Lu. intermedia bites, but not in PBMCs of control subjects. These data demonstrate that repeated exposure to Lu. intermedia SGS induces the expression of potentially host-protective IFN-inducible genes.

Visual functions in the healthy and schizophrenic brain : from stimulus control to illusory perceptions using electrical neuroimaging

ABSTRACT (FRENCH)Ce travail de thèse basé sur le système visuel chez les sujets sains et chez les patients schizophrènes, s'articule autour de trois articles scientifiques publiés ou en cours de publication. Ces articles traitent des sujets suivants : le premier article présente une nouvelle méthode de traitement des composantes physiques des stimuli (luminance et fréquence spatiale). Le second article montre, à l'aide d'analyses de données EEG, un déficit de la voie magnocellulaire dans le traitement visuel des illusions chez les patients schizophrènes. Ceci est démontré par l'absence de modulation de la composante PI chez les patients schizophrènes contrairement aux sujets sains. Cette absence est induite par des stimuli de type illusion Kanizsa de différentes excentricités. Finalement, le troisième article, également à l'aide de méthodes de neuroimagerie électrique (EEG), montre que le traitement des contours illusoires se trouve dans le complexe latéro-occipital (LOC), à l'aide d'illusion « misaligned gratings ». De plus il révèle que les activités démontrées précédemment dans les aires visuelles primaires sont dues à des inférences « top- down ».Afin de permettre la compréhension de ces trois articles, l'introduction de ce manuscrit présente les concepts essentiels. De plus des méthodes d'analyses de temps-fréquence sont présentées. L'introduction est divisée en quatre parties : la première présente le système visuel depuis les cellules retino-corticales aux deux voix du traitement de l'information en passant par les régions composant le système visuel. La deuxième partie présente la schizophrénie par son diagnostic, ces déficits de bas niveau de traitement des stimuli visuel et ces déficits cognitifs. La troisième partie présente le traitement des contours illusoires et les trois modèles utilisés dans le dernier article. Finalement, les méthodes de traitement des données EEG seront explicitées, y compris les méthodes de temps-fréquences.Les résultats des trois articles sont présentés dans le chapitre éponyme (du même nom). De plus ce chapitre comprendra les résultats obtenus à l'aide des méthodes de temps-fréquenceFinalement, la discussion sera orientée selon trois axes : les méthodes de temps-fréquence ainsi qu'une proposition de traitement de ces données par une méthode statistique indépendante de la référence. La discussion du premier article en montrera la qualité du traitement de ces stimuli. La discussion des deux articles neurophysiologiques, proposera de nouvelles d'expériences afin d'affiner les résultats actuels sur les déficits des schizophrènes. Ceci pourrait permettre d'établir un marqueur biologique fiable de la schizophrénie.ABSTRACT (ENGLISH)This thesis focuses on the visual system in healthy subjects and schizophrenic patients. To address this research, advanced methods of analysis of electroencephalographic (EEG) data were used and developed. This manuscript is comprised of three scientific articles. The first article showed a novel method to control the physical features of visual stimuli (luminance and spatial frequencies). The second article showed, using electrical neuroimaging of EEG, a deficit in spatial processing associated with the dorsal pathway in chronic schizophrenic patients. This deficit was elicited by an absent modulation of the PI component in terms of response strength and topography as well as source estimations. This deficit was orthogonal to the preserved ability to process Kanizsa-type illusory contours. Finally, the third article resolved ongoing debates concerning the neural mechanism mediating illusory contour sensitivity by using electrical neuroimaging to show that the first differentiation of illusory contour presence vs. absence is localized within the lateral occipital complex. This effect was subsequent to modulations due to the orientation of misaligned grating stimuli. Collectively, these results support a model where effects in V1/V2 are mediated by "top-down" modulation from the LOC.To understand these three articles, the Introduction of this thesis presents the major concepts used in these articles. Additionally, a section is devoted to time-frequency analysis methods not presented in the articles themselves. The introduction is divided in four parts. The first part presents three aspects of the visual system: cellular, regional, and its functional interactions. The second part presents an overview of schizophrenia and its sensoiy-cognitive deficits. The third part presents an overview of illusory contour processing and the three models examined in the third article. Finally, advanced analysis methods for EEG are presented, including time- frequency methodology.The Introduction is followed by a synopsis of the main results in the articles as well as those obtained from the time-frequency analyses.Finally, the Discussion chapter is divided along three axes. The first axis discusses the time frequency analysis and proposes a novel statistical approach that is independent of the reference. The second axis contextualizes the first article and discusses the quality of the stimulus control and direction for further improvements. Finally, both neurophysiologic articles are contextualized by proposing future experiments and hypotheses that may serve to improve our understanding of schizophrenia on the one hand and visual functions more generally.

Disseny i implementació en un mòdul linux encastat d’una eina de gestió local per a equips de xarxa de l'empresa W-onesys S.L.

Aquest projecte, s’ha desenvolupat en un marc empresarial, concretament al departamentR+D+i de l’empresa Wonesys S.L. de Sant Cugat del Vallès. L’empresa es dedica aldesenvolupament d’equipament per transmissions òptiques.Les eines de gestió dels equips existents, no satisfan els requeriments de l’empresa i amb aquest projecte es busca la implementació d’una eina per fer-ho. Entre les aplicacions actuals es pot trobar, per una banda, un sistema EMS (Element Management System) que ofereix interfíciegràfica d’usuari, però que requereix una infrastructura complexa per ser executada. Per l’altra banda, fins a tres interfícies diferents per connectar directament amb els equips, dues d’elles basades en protocols estàndard i una tercera que implementa un protocol propietari. Es tractad’interfícies d’intercanvi de text, per tant, la gestió mitjançant les mateixes es fa molt poc pràctica tot i no requerir cap infrastructura complexa com en el cas anterior. Una combinació de les virtuts de les anteriors són, a grans trets, els requeriments de la nova aplicació. Es volconstruir, doncs, una aplicació amb interfície gràfica d’usuari complerta que pugui ser accessible de forma senzilla utilitzant, tan sols, un terminal com a maquinari de suport.Un anàlisi del mercat il·lustra que hi ha molta disparitat en aplicacions similars. Hi ha grans diferències entre aplicacions de fabricants d’equipament i altres que només fan aplicacions per tercers.De les diverses possibilitats presentades per dur a terme la implementació, després d’un detingut anàlisi, es considera que la millor opció és el desenvolupament d’una aplicació web. Com l’aplicació ha de residir en un sistema Linux encastat, es fa un repàs del concepte ‘encastat’. Es defineix el terme i es dóna una mirada al mercat. Es descriuen i es comparen les arquitecturesARM i x86 i es relacionen amb el món encastat.Al tractar-se d’un sistema encastat amb arquitectura diferent a la d’un entorn web habitual, l’elecció de les eines representa un paper molt important, així com el procés de compilació i configuració d’eines que tradicionalment s’obtenen compilades.S’han escollit eines de programari lliure i dissenyades especialment per a entorns encastats. El patró de disseny usat pel desenvolupament de l’aplicació web és el Model View Controller, que facilita l’estructuració i un correcte manteniment de l’aplicació.La utilització de la tecnologia web resulta en una aplicació senzilla d’utilitzar, sense necessitat d’instal·lació de cap tipus per part de l’usuari i amb una interfície gràfica molt versàtil. La valoració per part dels usuaris de l’aplicació, tant treballadors de l’empresa en tasques dedesenvolupament i depuració, com clients en equips en explotació, és molt positiva. Tant és així, que sorgeixen opcions per reformular el sistema EMS per unificar interfícies i reaprofitar codi.

El Tabac al món : la indústria a nivell local i global, legislació, problemes i reptes de futur

Per què a un fumador del Canadà li costa 10 vegades més diners comprar un paquet de tabac que el que li costa a un fumador de Cuba? Què se n’ha fet dels anuncis de Marlboro als cotxes de l’escuderia automovilística Ferrari? Comés que s’han creat espais reservats per a fumadors en els últims anys? Aquestes i altres preguntes sobre el món del tabac conformen l’objecte del nostre treball d’investigació. El nostre propòsit és intentar donar resposta a qüestions com aquestes, i fer que el lector entengui realment a què es deuen aquests canvis en l’estructura del mercat del tabac. Mostrarem, mitjançant una mirada analítica dels diferents factors, que gran part d’aquests efectes en un producte (com pot ser el cigarret, en el cas que ens ocupa) són extrapolables a altres béns i que es poden explicar des del punt de vista econòmic, examinant les decisions d’agents amagats com ara el govern, i considerant les repercussions dels diferents tipus de polítiques.Com tots sabem, el món actual està conformat per un seguit de relacions entre individus, o millor dit, agents econòmics que interactuen entre ells. Els resultats d’aquestes interaccions determinen el comportament de variables que, ben definides, poden ser estudiades, així com els seus efectes. Nosaltres hem intentat mostrar d’una manera senzilla i a l’abast de tothom fins a quin punt arriben aquestes interrelacions. El que preteníem en tot moment basar-nos en dades objectives obtingudes previ estudi. Es per això que, de la mateixa manera que al acabar el treball el lector serà capaç d’entendre per què varia elpreu del mateix bé al creuar una frontera, queda a càrrec de cadascú determinar si, per exemple, els fumadors són objectes de persecució o de si les mesures paternalistes del govern envers la prohibició de la publicitat estan justificades.