Science is Primary - Children Thinking and Learning in theChemistry Laboratory

The goal of primary science education is to foster children’s interest, develop positive science attitudes and promote science process skills development. Learning by playing and discovering provides several opportunities for children to inquiry and understand science based on the first–hand experience. The current research was conducted in the children’s laboratory in Heureka, the Finnish science centre. Young children (aged 7 years) which came from 4 international schools did a set of chemistry experiments in the laboratory. From the results of the cognitive test, the pre-test, the post-test, supported by observation and interview, we could make the conclusion that children enjoyed studying in the laboratory. Chemistry science was interesting and fascinating for young children; no major gender differences were found between boys and girls learning in the science laboratory. Lab work not only encouraged children to explore and investigate science, but also stimulated children’s cognitive development.

Comparison of learning between Digital gallery and Hands-on Laboratory

This thesis has been done in ROM (Royal Ontario Museum) located in Toronto Canada. It focuses on learning in two parts of the museum. It tries to find out how much each part is effective in terms of learning. Studies have been done in the Digital gallery, which has been equipped with digital video projector and workstation that allows visitors to interact with the collections in 2 or 3 dimensional spaces while they are watching the presenting film. The rest of the study was in Hands-on laboratory, which allows students to examine artifacts and discuss their findings .The method was used in this research is Concept mapping .In Digital gallery, 24 schools surveys in the form of pre-post- test by help of the concept mapping method has been done. In Hands-on laboratory, 12 schools have been studied by using the combination of interviewing and written pre post-test of concept mapping.

Print quality study of a laboratory offset press

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g. to establish the optimal settings.The mission with this project was to partly determine the present variability of the print quality andto evaluate if the fountain solution, distilled water and 2% Diol green concentrate, used at the momentmixed with different percentages of Isopropanol could decrease the variability and contribute to morestabile results. Throughout the whole project the print quality showed a high variation and was evenmore variable when the Isopropanol was added. All in all 50 print rounds times twelve printed paperstrips was carried out through the project divided into three parts. To analyse the print quality, amicroscope with an image capture camera has been used. Data from the taken images was analysedand inserted into charts to see the variations.The conclusions of the whole project are not satisfying because no final evaluations were possible tomake. Main conclusions are that the additive of Isopropanol to the ordinary fountain solution, used atpresent, only contributed to more unstable results of the print quality. And it seems to be difficult toget some stable results from the lab press as long as the room where it is placed is not fully conditionedas required for the process of offset printing. And the fact that the airbrush which applies theamount of fountain solution is also variable, as shown in earlier projects, which contributes to unstableresults as well. For further work more exact parameters as a conditioned room are required and thepossibility to further design the laboratory press to use waterless offset printing instead.

Lithography Laboratory 3

Photograph of students at the Voorhees Technical Institute.

Lithography Laboratory 2

Photograph of students at the Voorhees Technical Institute.

Lithography Laboratory 1

Photograph of students at the Voorhees Technical Institute.

Tratamento de efluente de curtume por contactores biológicos rotatórios com opção de pré-tratamento por reator acidogênico

Esta pesquisa teve por objetivo avaliar a performance de um sistema de tratamento baseado no processo de Contactores Biológicos Rotatórios (CBR), com a opção de prétratamento por Reator Acidogênico (RA), para o tratamento do efluente de um curtume que realiza as operações de recurtimento e acabamento. Os estudos experimentais foram desenvolvidos em escala de bancada, onde foram testadas duas configurações para a estação de tratamento. Na Configuração I o Reator Acidogênico precede o sistema de CBR, na Configuração II apenas um decantador precede os CBR. Para cada configuração foram testados três Tempos de Detenção Hidráulica (TDH) de 90, 45 e 22 horas no sistema de CBR correspondentes as Etapas 1, 2 e 3 respectivamente. Deste modo foi possível avaliar a influência do RA no desempenho dos CBR, sendo que o RA teria a função de promover a hidrólise e solubilização da matéria orgânica dificilmente degradável, facilitando a ação dos microrganismos aeróbios nos CBR. Foi avaliada a remoção de matéria orgânica nas três etapas das duas configurações estudadas, tendo como resultados eficiências (remoção de DQOt) de 60%, 61% e 63% para as etapas 1,2 e 3 respectivamente da Configuração I e 81%, 83% e 66% para as etapa 1, 2 e 3 da Configuração II. Também foram avaliadas as remoções de cromo além da nitrificação e denitrificação no sistema de tratamento. A comparação entre as duas Configurações estudadas ficou prejudicada devido a mudanças nas características do efluente do curtume que na Configuração II apresentou uma maior degradabilidade (maior relação DBO/DQO) que na Configuração I. Mesmo assim, foi obtida uma correlação entre os dados de carga de DQOsol aplicada e removida indicando que o Reator Acidogênico promoveu uma otimização no sistema de CBR. Assim foi possível avaliar as características operacionais e a proposição de modelo matemático referente ao desempenho de CBR tratando um efluente real de lenta degradação.

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Larval development of Notolopas brasiliensis Miers, 1886 (Brachyura: Majoidea: Pisidae) described from laboratory reared material and a reappraisal of the characters of Pisidae

O completo desenvolvimento larval de Notolopas brasiliensis é descrito, a partir de material criado em laboratório, com ênfase na morfologia externa de Majoidea e comparado aos demais gêneros de Pisidae. O desenvolvimento larval de N. brasiliensis consiste em dois estágios de zoea e um de megalopa. A duração media de cada estágio foi de 4.2 ± 1.0 dias para a Zoea I e 3.8 ± 0.7 dias para a Zoea II, a megalopa aparece entre 8.1 ± 0.4 dias após a eclosão. Os caracteres previamente utilizados para definir as formas larvais de Pisidae ou são simplesiomórficos ou altamente homoplásticos. Foi observado que não existe um conjunto de caracteres capazes de definir Pisidae até o presente.Contudo foi mostrado que uma combinação de caracteres pode ser utilizada para diferenciar Notolopas dos demais gêneros da família.

Large scale laboratory cultures of Ankistrodesmus gracilis (Reisch) Korsikov (Chlorophyta) and Diaphanosoma biergei Korinek, 1981 (Cladocera)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Population growth and development of two species of Cladocera, Moina micrura and Diaphanosoma birgei, in laboratory

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

NOTES on THE BIOLOGY and BEHAVIOUR of THE JEWEL WASP, AMPULEX COMPRESSA (FABRICIUS, 1781) (HYMENOPTERA; AMPULICIDAE), IN THE LABORATORY, INCLUDING FIRST RECORD of GREGARIOUS REPRODUCTION

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of the insecticides abamectin and lufenuron on eggs and larvae of Chrysoperla externa under laboratory conditions

The side effects of two insecticides/acaricides, abamectin and lufenuron, on the eggs and larvae of Chrysoperla externa (Hagen) were studied in the laboratory (25 +/- 2degreesC, 62 +/- 10% RH and 12-h photophase). The analytical methods used were those proposed by the International Organization for Biological Control (IOBC)-Working Group for 'Pesticides and Beneficial Organisms'. Chrysoperla externa egg viability was not affected by abamectin. Neonate larvae from abamectin sprayed eggs as well as first, second and third instar larvae that were directly treated, developed normally and yielded normal adults. Lufenuron presented no adverse effects on egg survival. However, lufenuron induced high mortality in neonate larvae from treated eggs. These neonates, as well as lufenuron treated first and second instar larvae could not molt. In the third instar, high pupal mortality occurred. The results showed that abamectin is innocuous and that lufenurom is toxic to Chrysoperla externa eggs and larvae.

Larvicidal activity of the water extract of Moringa oleifera seeds against Aedes aegypti and its toxicity upon laboratory animals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fecundity and pre-imaginal period of Chrysoperla externa (hagen) (neuroptera: chrysopidae) under different populations and laboratory generations

The lacewings appear in many agroecosystems, preying several species of agricultural pests. They have great search capability, high voracity, high reproductive potential and are easily maintained in laboratory conditions. In laboratory rearing, to avoid problems in the mass production are recommended adjustments in the type and quality of prey to be used in order to obtain individuals with desirable characteristics. It is necessary special care with the laboratory populations, avoiding problems from inbreeding. Larvae were reared individually in Petri dishes (9.0 cm diameter) and fed with eggs of Sitotroga cerealella (Olivier, 1789) (Lepidoptera: Gelechiidae), in the amount of 25 mg / larva, while the adults were kept in PVC cylindrical cages (10 cm x 30 cm). Thus, the study analyzed the influence of the size of the population of Chrysoperla externa (Hagen, 1861) (Neuroptera: Chrysopidae) on the pre-imaginal period (egg to adult) and reproductive capacity of this specie come from different populations and generations of laboratory. To this end, we used two populations, one of Jaboticabal (F-8 and F-21) and one of Piracicaba (F-6 and F-15), and subpopulations of 1, 5, 10, 15 and 20 couples, analyzing the incubation of eggs and the number of eggs per female in each population, generation and subpopulation. The pre-imaginal period (egg to adult) and the number of eggs per female of C. externa are influenced by the generation and the number of founding individuals, being these parameters favored when laboratory populations are established with the largest number of couples.