Inventário da ictiofauna do alto rio Paraíba do Sul e caracterização molecular das espécies encontradas

The state of São Paulo has four main drainages: Paraná river, Paraíba do Sul river, Ribeira do Iguape river and coastal rivers. The Paraíba do Sul river is born in Sao Paulo and drains an important range of land east of the state. Its ichthyofauna has some similarities and many differences from the continental and coastal drainages which highlights the importance of this study. Surveys conducted in the ichthyofauna of this basin, as in other large river basins in Brazil, is still incomplete. Moreover, there is no consensus about the taxonomic status of many species listed in these surveys. Considering the promising use of DNA barcode as a global system for species identification, the present study is aimed to establishing an inventory of the ichthyofauna of the São Paulo portion of the river Paraíba do Sul and simultaneously build a DNA barcode reference sequence library for fish found. Were obtained and analyzed 354 sequences of the gene cytochrome oxidase c subunit I (COI) belonging to 66 species of São Paulo portion of the Paraíba do Sul river. The average K2P distance between individuals within species of this basin was 0.48%, and 9,87% between species within a genus. Five pairs of species (10 species) showed low levels of interspecific genetic divergence (<2%),but all could be correctly identified. This study showed that the fish species analyzed could be identified efficiently through the use of barcode generating data that can provide information for further studies of this fauna, besides contributing to the global initiative to characterize the species of fish in the world of a molecular point of view. Five pairs of species (10 species) showed low levels of interspecific genetic divergence (<2%), but all could be correctly identified. This study showed that the fish species analyzed could be identified efficiently through the use of barcode generating data that can provide subsidies for further studies in this fauna, as well as ...

Comparação de compósitos obtidos via RTM de resina epóxi e fibra de carbono com e sem descontinuidade nos tecidos

Technology is growing interest in the use of composites, due to the requirement of lighter materials and more resistant, factors essential to meet the project specifications and reduce the operational cost. In the production of high performance structural composites, considering the aerospace criteria, the domestic industry has shown interest in the process of resin transfer molding (RTM) for reproducibility and low cost. This process is suitable for producing components of polymeric composites with relatively simple geometries, consistent thicknesses, high quality finish with no size limitations. The objective of this work was machined carbon steel to make a matched-die tooling for RTM and produce two composite plates of epoxy resin and carbon fiber fabric with and without induced discontinuities, which were compared towards their impregnation with ultrasound, their properties via tensile tests and thermal analysis. In ultrasonic inspection, it was found good impregnation of the preform of both composites. In the thermal analysis it was possible to check the degradation temperature of the composites, the glass transition temperature and it was found that the composites showed no effective cure cycles, but presented good performance in the tensile test when compared with aluminum alloy 7050 T7451 . The results showed that the injection strategy was appropriate since the laminate exhibited a good quality for the proposed application

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Gestão de Estoques: análise e melhoria do processo de inventário físico em uma indústria siderúrgica

Accuracy in physical inventory process is essential to develop anefficient inventorycontrol. This ensures the availability of products and ensure that the information contained in the information systems areinaccordancewith the reality of inventories. The inventory management policies of the company aim ofthis study established that all the materials in their inventory must becounted, which is proving a challenge. Therefore, the aim of thiswork is to identify the critical inventories and analyze them, seeking flaws and possible improvements in the inventory count process. For this, we used the tools of quality management, such as Pareto and Cause and Effect Diagrams in an action research. The results show that the stocks of finished products are critical in volume and can be hampered by a lack of training and personnel trained in performing the process, as well as limitations in ERP used. With the actions taken against these problems, we could notice an improvement in the process, because the data collection and processing of data has become easier, besides the occurrence of errors decreased. In addition, there was an acceleration in meeting targets compared to the previous period

Inventário de abelhas solitárias (Hymenoptera: Apoidea) com o auxílio de ninhos-armadilhas no campus da Unesp de Rio Claro - SP

As abelhas solitárias são caracterizadas pela independência da fêmea em construir e aprovisionar sozinha seus ninhos, sem auxílio, cooperação ou divisão de trabalho entre as fêmeas de uma mesma geração, ou entre mãe e filhas. Dentro deste grupo, se enquadram aquelas que nidificam em cavidades pré-existentes. O objetivo deste trabalho é inventariar as espécies de abelhas solitárias no Campus da UNESP de Rio Claro - SP com o auxílio de ninhos-armadilha. Para este estudo foram escolhidos quatro locais, e em cada um foram expostos 212 ninhos-armadilha, confeccionados com cartolina preta, fechados numa das extremidades, todos com o mesmo comprimento, porém diferentes quanto ao diâmetro: 12,0 x 0,6 cm (ninho pequeno, NP) e 12,0 x 0,8 cm (ninho grande, NG). Esses ninhos foram arranjados dentro de tubos de PVC e apoiados em prateleiras ou em troncos, sempre a 1,40 metros de altura e protegidos contra o sol e chuva. A amostragem dos ninhos foi realizada no período entre maio de 2009 e abril de 2010, com coletas a cada dez dias. Cada ninho retirado foi reposto para manter o número de ninhos disponíveis. O período de emergência foi acompanhado de maio de 2009 a agosto de 2010. Apenas um ponto de amostragem houve coletas de ninhos de abelhas, o “Sítio de Nidificação”, com nidificação de sete espécies de abelhas pertencentes às famílias Apidae, Centris (Hemisiella) tarsata, Centris (Heterocentris) analis, Tetrapedia curvitarsis e Tetrapedia diversipes, e Megachilidae, Carloticola sp., Epanthidium tigrinum e Megachile sp. A espécie mais abundante foi Tetrapedia curvitarsis, seguida por Centris (Heterocentris) analis e Tetrapedia diversipes. A construção de ninhos foi maior durante o período chuvoso, havendo no mês de fevereiro de 2010 maior abundância de nidificações (23%) assim como maior riqueza de espécies nidificando (n = 6). Neste mesmo mês também... (Resumo completo, clicar acesso eletrônico abaixo)

Sintese e caracterização da resina fenol-furfurílica para a obtenção de carbono vítreo monolítico

The monolithic glassy carbon is a carbonaceous material, isotropic, non graphitizable obtained by means of carbonization of resins up to 1000 °C. The good physicochemical properties make this material applied in several areas such as aerospace, medicine, electronics, chemistry, among others. It has generally been processed from the use of phenolic and furfuryl alcohol resins. These resins have high crosslink density and high fixed carbon content and are therefore widely applied in aerospace. The combination phenol / furfuryl alcohol resins search for obtaining the most suitable process for the glass-like carbon processing with phenolic resins currently available and of lower cost and easier to synthesize than the furfuryl alcohol resin. The main objective of this work is to obtain a phenol-furfuryl resin with high fixed carbon content combined with low porosity of the material. Different synthesis routes have been adopted along with thermal analysis techniques, FTIR and image analysis. The resin obtained through partial synthesis process presented the characteristics sought in this work

Cinética de degradação do sistema resina epóxi/fibra de carbono

With the increasing demand for electricity, the retraining of transmission lines is necessary despite environmental restrictions and crossings in densely populated areas to build new transmission and distribution lines. Solution is reuse the existent cables, replacing the old conductor cables for new cables with higher capacity power transmission, and control of sag installed. The increasing demand for electrical power has increased the electric current on the wires and therefore, it must bear out temperatures of 150°C or more, without the risk of the increasing sag beyond the established limits. In the case of long crossings or densely populated areas, sag is due to high weight of the cable on clearance. The cable type determines the weight, sag, height and the towers dimensions, which are the items that most influence the investment of the transmission line. Hence, to reduce both cost of investment and maintenance of the line, the use of a lighter cable can reduce both number and the height of the towers, with financial return on short and long term. Therefore, in order to increase the amount of transmitted energy and reduce the number of built towers and sag, is recommended in the current work substitute the current core material (steel or aluminium) for alternatives alloys or new materials, in this case a composite, which has low density, elevated stiffness (elasticity module), thus apply the pultruded carbon fiber with epoxy resin as matrix systems and perform the study of the kinetics of degradation by thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), according to their respective standards

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Estudo do efeito da classe de furação na resistência à fadiga em junta alumínio – fibra de carbono

This work performs a comparative study of fatigue life of riveted lap joints involving classes of drilling which adjustment is made with interference or clearance. For this study, representative specimens of this joints were manufactured with four rivets distributed in two rows. In this context, are presented the test matrix, the methodology employed in performing of the tests, the used mathematical modeling, and that methods that are the basis for the latter are described through the theoretical foundation. Next, are present the results obtained in fatigue tests and images of the region of failure of the specimens. Finally, are present some comments and conclusions related to the results obtained

Análise Isotópica de Carbono-13 e Nitrogênio-15 da Ipomoea violacea para Determinação de sua Origem Geográfica

Along the Earth globe we can find many types of psychoactive plants. Among them is the Ipomoea violacea, popularly known as Morning Glory. There are ergotalkaloids producer associated-fungus in its leaves and seeds. One of these alkaloids that can be found is the ergine (or LSA), a homologous substance of the lysergic acid diethylamide (LSD). There are many discussions around the world about the inclusion of LSA in the list of controlled substances. In Brazil, this was recently prohibited. One of the most important point of view in the study of isotopic composition of 13C and 15N of this plant is the fact that there is a total alkaloid variation in function of its geographic origin like was verified in 1960’s, besides to aggregate knowledge about it. This work was made to verify if the isotopic ratio can be used as a tool in tracing this illegal Brazilian plant. We could conclude that this plant presents a C3 photosynthetic pathway, its parts has different isotopic carbon and nitrogen composition and that stable isotope analysis can be successfully used as a tool to detect its geographic origin

Planejamento ambiental da bacia hidrográfica do córrego Embirí – UGRHI Pontal do Paranapanema – São Paulo: inventário e diagnóstico

This study aimed to contribute to the environmental planning of the watershed Embirí stream - UGRHI Pontal Paranapanema (belonging to the Paranapanema Management unit) in the cities of Presidente Prudente and Regente Feijó, São Paulo. This basin is located in the area of the Santo Anastácio river source, responsible for supplying water to about 30% of the population of Presidente Prudente. The methodological procedures based on Leal (1995) and Rodriguez et al. (2004), and the steps include inventory and diagnosis of the basin. We conducted extensive literature review, cartographic and documentary on the subject area of research, field work, preparation of thematic maps and summary chart of physical units and environmental use and land cover, participatory mapping of environmental risks, quality analysis of water. Most of the basin of the stream of twine had a high environmental fragility and the main problems found were lack of riparian vegetation, erosion, siltation of water bodies, irregular disposal of debris and the dumping of sewage. The results were summarized in the diagnosis and can identify the most important environmental impacts, environmental and spatial weaknesses of the legislation, and thus draw up proposals for action to the area that is substantially degraded

Gerenciamento de inventário por meio de ferramentas de controle da produção em empresas de higiene pessoal, perfumaria e cosméticos

This action-research work presents tools which are related to production monitoring: Follow-up of Products Release from Quality Department and Follow-up of Production Volumes. Both tools allows controlling release delays of finished goods based on the quality specifications, and the accurate analysis of production volumes variations compared to pre-established plans. They have direct impact into enterprises inventory levels that are part of Toiletries, Perfumery and Cosmetics market segment. By applying these tools, it´s possible to identify opportunities for process optimization that brings benefits for the final customer. The results seen by the tools application are presented by the analysis of delayed stock for release quantities evolution and testimonies from professionals of Supply Chain

Avaliação do efeito ambiental nas propriedades mecânicas e viscoelásticas de compósitos híbridos de titânio/fibra de carbono/resina epóxi

Hybrid composites combining metal plates and laminates with continuous fiber reinforced polymer, called fiber-metal (CHMF), have been particularly attractive for aerospace applications, due mainly to their high mechanical strength and stiffness associated with low density. These laminates (CHMF) consist of a sandwich structure consisting of layers of polymer composites and metal plates, stacked alternately. This setting allows you to combine the best mechanical performance of polymer composites reinforced with long fibers, to the high toughness of metals. Environmental effects should always be considered in the design of structural components, because these materials in applications are submitted to the effects of moisture in the atmosphere, the large cyclical variations of temperature around 82 ° C to -56 ° C, and high effort mechanical. The specimens of fibermetal composite were prepared at EMBRAER with titanium plates and laminates of carbon fiber/epoxy resin. This study aims to evaluate the effect of different environmental conditions (water immersion, hygrothermal chamber and thermal shock) of laminate hybrid titanium/carbon fiber/epoxy resin. The effects of conditioning were evaluated by interlaminar shear tests - ILSS, tensile, and vibration free

Planejamento ambiental da Bacia Hidrográfica do Córrego da Olga, UGRHI Pontal do Paranapanema – São Paulo: inventário e diagnóstico

This work, presented in order to obtain the environmental engeneer title, is to raise the current status of environmental conditions in the watershed of the stream of Olga and thus contribute to environmental planning for the recovery, conservation and preservation. To this end, we conducted literature surveys and survey of the characteristics of the watershed, analysis of water fron stream of Olga and making use of remote sensingand of the soil, environmental fragiityand spatialization of APPs in order to carry out further research on the environmental conditions of the basin, as well as inferences about possible causes of degradation of watershed.Most of the basin of the stream Olga had a high environmental fargility and the main problem was the lack of riparian vegetation is also considered the cause of environmental problems of the watershed.The results will be available to municipal governments in order to contribute to their planning and management of UGRHI the teh watershed pertence

Estudo da adsorção e oxidação do monóxido de carbono sobre as fases intermetálicas ordenadas AuIn, AuSb2, AuSn, PdSb e PdSn

Aiming to reduce the cost of electrocatalysts and a greater resistance to CO poisoning this work was to study the adsorption and oxidation of carbon monoxide on ordered intermetallic phases AuIn, AuSb2, AuSn, PdSb and PdSn using voltammetric techniques in alkaline electrolyte solution. The results suggest that the AuSn and PdSn intermetallics has some form of resistance to CO poisoning. It is assumed that this behavior is a result of electronic effect and the effect of the third body has been achieved by adding a second metal to Au and Pd. However, further studies should be conducted to confirm this hypothesis as to test these materials as electrocatalysts in the reaction of oxidation of fuels