[n]cycloparaphenylenes with charges: cyclic conjugation at last

Oligophenylenes (polyphenylenes) are constituted by an array of conjugated benzenes where inter-ring electron delocalization tends to extend over the whole chain (linear conjugation) being intrinsically limited, among other factors, by terminal effects. Alternatively, cyclic conjugation is envisaged as the unlimited free-boundary versionofconjugation which will impact the structure of molecules in rather unknown ways. The cyclic version of oligophenylenes, cycloparaphenylenes ([n]CPPs with n the number of phenyl rings) were first synthesized in 2008 by Beztozzi and Jasti.1 Today the whole [n]CPP series from [5]CPP to [18]CPP has been prepared. [n]CPPs represent ideal models to investigate new insights of the electronic structure of molecules and cyclic conjugation when electrons or charges circulate in a closed circuit without boundaries. Radical cations and dications of [n]CPP from n=5 to n=12 have been prepared and studied by Raman spectroscopy.2 Small [n]CPP dications own their stability to the closed-shell electronic configuration imposed by cyclic conjugation. However, in large [n]CPP dications cyclic conjugation is minimal and these divalent species form open-shell biradicals. The Raman spectra reflect the effect of cyclic conjugation in competition with cyclic strain and biradicaloid aromatic stabilization. Cyclic conjugation provokes the existence of a turning point or V-shape behavior of the frequencies of the G bands as a function of n. In this communication we will show the vibrational spectroscopic fingerprint of this rare form of conjugation. [1] R. Jasti, J. Bhattacharjee, J. B. Neaton, C. R. Bertozzi, “Synthesis, Characterization, and Theory of [9]-, [12]-, and [18]Cycloparaphenylene: Carbon Nanohoop Structures”, J. Am. Chem. Soc. 130 (2008), 17646–17647. [2] M. P. Alvarez, P. M. Burrezo, M. Kertesz, T. Iwamoto, S. Yamago, J. Xia, R. Jasti, J. T. L. Navarrete, M. Taravillo, V. G. Baonza, J. Casado, “Properties of Sizeable [n]CycloParaPhenylenes As Molecular Models of Single-Wall Carbon Nanotubes By Raman Spectroscopy: Structural and Electron-Transfer Responses Under Mechanical Stress”, Angew. Chem. Int. Ed. 53, (2014), 7033−7037.

Flow around a hemisphere-cylinder at high angle of attack and low Reynolds number. Part I: Experimental and numerical investigation

Three-dimensional Direct Numerical Simulations combined with Particle Image Velocimetry experiments have been performed on a hemisphere-cylinder at Reynolds number 1000 and angle of attack 20◦. At these flow conditions, a pair of vortices, so-called “horn” vortices, are found to be associated with flow separation. In order to understand the highly complex phenomena associated with this fully threedimensional massively separated flow, different structural analysis techniques have been employed: Proper Orthogonal and Dynamic Mode Decompositions, POD and DMD, respectively, as well as criticalpoint theory. A single dominant frequency associated with the von Karman vortex shedding has been identified in both the experimental and the numerical results. POD and DMD modes associated with this frequency were recovered in the analysis. Flow separation was also found to be intrinsically linked to the observed modes. On the other hand, critical-point theory has been applied in order to highlight possible links of the topology patterns over the surface of the body with the computed modes. Critical points and separation lines on the body surface show in detail the presence of different flow patterns in the base flow: a three-dimensional separation bubble and two pairs of unsteady vortices systems, the horn vortices, mentioned before, and the so-called “leeward” vortices. The horn vortices emerge perpendicularly from the body surface at the separation region. On the other hand, the leeward vortices are originated downstream of the separation bubble, as a result of the boundary layer separation. The frequencies associated with these vortical structures have been quantified.

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Dori Caymmi e o processo de ressignificação musical

Dissertação (mestrado)—Universidade de Brasília, Instituto de Artes, Departamento de Música, 2016.

Synthetic approaches to flexible fluorescent conjugated polymers

Conjugated polymers (CPs) are intrinsically fluorescent materials that have been used for various biological applications including imaging, sensing, and delivery of biologically active substances. The synthetic control over flexibility and biodegradability of these materials aids the understanding of the structure-function relationships among the photophysical properties, the self-assembly behaviors of the corresponding conjugated polymer nanoparticles (CPNs), and the cellular behaviors of CPNs, such as toxicity, cellular uptake mechanisms, and sub-cellular localization patterns. ^ Synthetic approaches towards two classes of flexible CPs with well-preserved fluorescent properties are described. The synthesis of flexible poly( p-phenylenebutadiynylene)s (PPBs) uses competing Sonogashira and Glaser coupling reactions and the differences in monomer reactivity to incorporate a small amount (∼10%) of flexible, non-conjugated linkers into the backbone. The reaction conditions provide limited control over the proportion of flexible monomer incorporation. Improved synthetic control was achieved in a series of flexible poly(p-phenyleneethynylene)s (PPEs) using modified Sonogashira conditions. In addition to controlling the degree of flexibility, the linker provides disruption of backbone conjugation that offers control of the length of conjugated segments within the polymer chain. Therefore, such control also results in the modulation of the photophysical properties of the materials. ^ CPNs fabricated from flexible PPBs are non-toxic to cells, and exhibit subcellular localization patterns clearly different from those observed with non-flexible PPE CPNs. The subcellular localization patterns of the flexible PPEs have not yet been determined, due to the toxicity of the materials, most likely related to the side-chain structure used in this series. ^ The study of the effect of CP flexibility on self-assembly reorganization upon polyanion complexation is presented. Owing to its high rigidity and hydrophobicity, the PPB backbone undergoes reorganization more readily than PPE. The effects are enhanced in the presence of the flexible linker, which enables more efficient π-π stacking of the aromatic backbone segments. Flexibility has minimal effects on the self-assembly of PPEs. Understanding the role of flexibility on the biophysical behaviors of CPNs is key to the successful development of novel efficient fluorescent therapeutic delivery vehicles.^

Characterization of the poxAB operon encoding a class D carbapenemase in Pseudomonas aeruginosa

Pseudomonas aeruginosa is a dreaded opportunistic pathogen that causes severe and often intractable infections in immunocompromised and critically ill patients. This bacterium is also the primary cause of fatal lung infections in patients with cystic fibrosis and a leading nosocomial pathogen responsible for nearly 10% of all hospital-acquired infections. P. aeruginosa is intrinsically recalcitrant to most classes of antibiotics and has the ability to acquire additional resistance during treatment. In particular, resistance to the widely used β-lactam antibiotics is frequently mediated by the expression of AmpC, a chromosomally encoded β-lactamase that is ubiquitously found in P. aeruginosa strains. This dissertation delved into the role of a recently reported chromosomal β-lactamase in P. aeruginosa called PoxB. To date, no detailed studies have addressed the regulation of poxB expression and its contribution to β-lactam resistance in P. aeruginosa. In an effort to better understand the role of this β-lactamase, poxB was deleted from the chromosome and expressed in trans from an IPTG-inducible promoter. The loss of poxB did not affect susceptibility. However, expression in trans in the absence of ampC rendered strains more resistant to the carbapenem β-lactams. The carbapenem-hydrolyzing phenotype was enhanced, reaching intermediate and resistant clinical breakpoints, in the absence of the carbapenem-specific outer membrane porin OprD. As observed for most class D β-lactamases, PoxB was only weakly inhibited by the currently available β-lactamase inhibitors. Moreover, poxB was shown to form an operon with the upstream located poxA, whose expression in trans decreased pox promoter (Ppox) activity suggesting autoregulation. The transcriptional regulator AmpR negatively controlled Ppox activity, however no direct interaction could be demonstrated. A mariner transposon library identified genes involved in the transport of polyamines as potential regulators of pox expression. Unexpectedly, polyamines themselves were able induce resistance to carbapenems. In summary, P. aeruginosa carries a chromosomal-encoded β-lactamase PoxB that can provide resistance against the clinically relevant carbapenems despite its narrow spectrum of hydrolysis and whose activity in vivo may be regulated by polyamines.^

Les récepteurs GPR91 et GPR99 et leur implication dans le développement du système nerveux visuel

Les récepteurs couplés aux protéines G (RCPG) démontrent de plus en plus de capacités à activer des mécanismes jusqu’alors associés à des facteurs de transcription ou des molécules d’adhésion. En effet, de nouvelles preuves rapportent qu’ils pourraient également participer au guidage axonal qui est le mécanisme permettant aux axones de cellules nerveuses de rejoindre leur cible anatomique. Le guidage axonal se fait par l’interaction entre les molécules de guidage et une structure particulière présente à l’extrémité de l’axone, le cône de croissance. Par exemple, les RCPGs participent au guidage des cellules ganglionnaires de la rétine (CGR), dont les axones s’étendent de la rétine jusqu’au noyaux cérébraux associés à la vision. Cet effet est observé avec des RCPGs tels que les récepteurs aux cannabinoïdes (CB1 et CB2) et celui du lysophosphatidylinositol, le GPR55. Les RCPGs GPR91 et GPRG99, respectivement récepteurs au succinate et à l’α-cétoglutarate, se trouvent à la surface de ces CGRs, ce qui en font des candidats potentiels pouvant participer au guidage axonal. Dans ce mémoire, l’effet des ligands de ces récepteurs sur la croissance et la navigation des axones des CGRs fut analysé. L’impact produit par ces récepteurs ainsi que leurs ligands sur la morphologie des cônes de croissance fut déterminé en mesurant leur taille et le nombre de filopodes présents sur ces cônes. Pour évaluer le rôle du succinate et de l’a-cétoglutarate sur la croissance globale des axones de CGRs, la longueur totale des projections axonales d’explants rétiniens a été mesurée. L’effet de ces ligands des récepteurs GPR91 et GPR99 sur le guidage axonal a également été évalué en temps réel à l’aide d’un gradient créé par un micro injecteur placé à 45° et à 100µm du cône de croissance. La distribution in vivo des récepteurs GPR91 et GPR99 sur la rétine a été étudié à l’aide d’expériences d’immunohistochimie. Les résultats obtenus indiquent que l’ajout de 100µM de succinate produit une augmentation de la taille des cônes de croissance et du nombre de filopodes présents à leur surface. Il augmente également la croissance des axones. Ce type de réponse fut également observé lorsque les cellules furent soumises à 200µM d’α-cétoglutarate. Fait à noter, les deux récepteurs n’ont pas d’impact sur le guidage axonal. Ces résultats indiquent donc que les agonistes des récepteurs GPR91 et GPR99 augmentent la croissance des cellules ganglionnaires lorsqu’ils sont présents lors du développement. Par contre, ils n’ont pas d’influence sur la direction prise par les cônes de croissance. Ces nouvelles données sont un pas de plus dans la compréhension des mécanismes qui gèrent et participent au développement et la croissance des CGRs, ce qui pourrait donner de nouvelles cibles thérapeutique pouvant mener à la régénération de nerfs optiques endommagés.

El fenotipo "basal-her2" en el cáncer de mama: caracterización clínico-molecular e implicaciones terapéuticas

Clinically HER2+ (cHER2+) breast cancer (BC), as exclusively determined by immunohistochemistry of HER2 protein overexpression and/or fluorescence in situ hybridization of HER2 gene amplification, has been largely considered a single disease entity in terms of clinical outcome and in the susceptibility to the anti-HER2 monoclonal antibody trastuzumab (Herceptin). However, although the adjuvant/neoadjuvant use of the trastuzumab has been shown to significantly reduce recurrence risk when added to standard chemotherapy in women with early-stage cHER2+ BC, not all cases derive similar benefit from trastuzumab because a significant number of cHER2+ BC patients develop disease recurrence. Unfortunately, the identification of a robust clinical predictor of trastuzumab benefit, including HER2 itself, has proven challenging in the adjuvant/neoadjuvant setting. Thus, we suggest that a new generation of research needs to refine the prognostic taxonomy of cHER2+ BC and develop easy-to-use, clinicbased prediction algorithms to distinguish between good- and poor- responders to trastuzumab-based therapy ab initio. This study offered two hypotheses: 1.) HER2 overexpression can unexpectedly take place in a molecular background owned by basal-like BC (a commonly HER2-negative BC subtype which possesses many epithelial-mesenchymal transition (EMT) characteristics and exhibits robust cancer stem cell [CSC]-like features), thus generating a so-called basal/cHER2+ BC subtype; 2.) the basal/cHER2+ phenotype confers poor prognosis and delineates a subgroup of intrinsically aggressive cHER2+ BC with primary resistance to trastuzumab...

Unraveling the function of bacterial-type phosphoenolpyruvate carboxylase in vascular plants

Thesis (Master, Biology) -- Queen's University, 2016-09-29 20:09:46.997

Near-infrared polarimetry in the galactic center. On properties of Sagittarius A* and a dusty S-cluster object

Near-infrared polarimetry observation is a powerful tool to study the central sources at the center of the Milky Way. My aim of this thesis is to analyze the polarized emission present in the central few light years of the Galactic Center region, in particular the non-thermal polarized emission of Sagittarius~A* (Sgr~A*), the electromagnetic manifestation of the super-massive black hole, and the polarized emission of an infrared-excess source in the literature referred to as DSO/G2. This source is in orbit about Sgr~A*. In this thesis I focus onto the Galactic Center observations at $\lambda=2.2~\mu m$ ($K_\mathrm{s}$-band) in polarimetry mode during several epochs from 2004 to 2012. The near-infrared polarized observations have been carried out using the adaptive optics instrument NAOS/CONICA and Wollaston prism at the Very Large Telescope of ESO (European Southern Observatory). Linear polarization at 2.2 $\mu m$, its flux statistics and time variation, can be used to constrain the physical conditions of the accretion process onto the central super-massive black hole. I present a statistical analysis of polarized $K_\mathrm{s}$-band emission from Sgr~A* and investigate the most comprehensive sample of near-infrared polarimetric light curves of this source up to now. I find several polarized flux excursions during the years and obtain an exponent of about 4 for the power-law fitted to polarized flux density distribution of fluxes above 5~mJy. Therefore, this distribution is closely linked to the single state power-law distribution of the total $K_\mathrm{s}$-band flux densities reported earlier by us. I find polarization degrees of the order of 20\%$\pm$10\% and a preferred polarization angle of $13^o\pm15^o$. Based on simulations of polarimetric measurements given the observed flux density and its uncertainty in orthogonal polarimetry channels, I find that the uncertainties of polarization parameters under a total flux density of $\sim 2\,{\mathrm{mJy}}$ are probably dominated by observational uncertainties. At higher flux densities there are intrinsic variations of polarization degree and angle within rather well constrained ranges. Since the emission is most likely due to optically thin synchrotron radiation, the obtained preferred polarization angle is very likely reflecting the intrinsic orientation of the Sgr~A* system i.e. an accretion disk or jet/wind scenario coupled to the super-massive black hole. Our polarization statistics show that Sgr~A* must be a stable system, both in terms of geometry, and the accretion process. I also investigate an infrared-excess source called G2 or Dusty S-cluster Object (DSO) moving on a highly eccentric orbit around the Galaxy's central black hole, Sgr~A*. I use for the first time the near-infrared polarimetric imaging data to determine the nature and the properties of DSO and obtain an improved $K_\mathrm{s}$-band identification of this source in median polarimetry images of different observing years. The source starts to deviate from the stellar confusion in 2008 data and it does not show a flux density variability based on our data set. Furthermore, I measure the polarization degree and angle of this source and conclude based on the simulations on polarization parameters that it is an intrinsically polarized source with a varying polarization angle as it approaches Sgr~A* position. I use the interpretation of the DSO polarimetry measurements to assess its possible properties.

Immunolocalization of Arthropsin in the Onychophoran Euperipatoides rowelli (Peripatopsidae)

Opsins are light-sensitive proteins that play a key role in animal vision and are related to the ancient photoreceptive molecule rhodopsin found in unicellular organisms. In general, opsins involved in vision comprise two major groups: the rhabdomeric (r-opsins) and the ciliary opsins (c-opsins). The functionality of opsins, which is dependent on their protein structure, may have changed during evolution. In arthropods, typically r-opsins are responsible for vision, whereas in vertebrates c-opsins are components of visual photoreceptors. Recently, an enigmatic r-opsin-like protein called arthropsin has been identified in various bilaterian taxa, including arthropods, lophotrochozoans, and chordates, by performing transcriptomic and genomic analyses. Since the role of arthropsin and its distribution within the body are unknown, we immunolocalized this protein in a representative of Onychophora – Euperipatoides rowelli – an ecdysozoan taxon which is regarded as one of the closest relatives of Arthropoda. Our data show that arthropsin is expressed in the central nervous system of E. rowelli, including the brain and the ventral nerve cords, but not in the eyes. These findings are consistent with previous results based on reverse transcription PCR in a closely related onychophoran species and suggest that arthropsin is a non-visual protein. Based on its distribution in the central brain region and the mushroom bodies, we speculate that the onychophoran arthropsin might be either a photosensitive molecule playing a role in the circadian clock, or a non-photosensitive protein involved in olfactory pathways, or both.

Les récepteurs GPR91 et GPR99 et leur implication dans le développement du système nerveux visuel

Les récepteurs couplés aux protéines G (RCPG) démontrent de plus en plus de capacités à activer des mécanismes jusqu’alors associés à des facteurs de transcription ou des molécules d’adhésion. En effet, de nouvelles preuves rapportent qu’ils pourraient également participer au guidage axonal qui est le mécanisme permettant aux axones de cellules nerveuses de rejoindre leur cible anatomique. Le guidage axonal se fait par l’interaction entre les molécules de guidage et une structure particulière présente à l’extrémité de l’axone, le cône de croissance. Par exemple, les RCPGs participent au guidage des cellules ganglionnaires de la rétine (CGR), dont les axones s’étendent de la rétine jusqu’au noyaux cérébraux associés à la vision. Cet effet est observé avec des RCPGs tels que les récepteurs aux cannabinoïdes (CB1 et CB2) et celui du lysophosphatidylinositol, le GPR55. Les RCPGs GPR91 et GPRG99, respectivement récepteurs au succinate et à l’α-cétoglutarate, se trouvent à la surface de ces CGRs, ce qui en font des candidats potentiels pouvant participer au guidage axonal. Dans ce mémoire, l’effet des ligands de ces récepteurs sur la croissance et la navigation des axones des CGRs fut analysé. L’impact produit par ces récepteurs ainsi que leurs ligands sur la morphologie des cônes de croissance fut déterminé en mesurant leur taille et le nombre de filopodes présents sur ces cônes. Pour évaluer le rôle du succinate et de l’a-cétoglutarate sur la croissance globale des axones de CGRs, la longueur totale des projections axonales d’explants rétiniens a été mesurée. L’effet de ces ligands des récepteurs GPR91 et GPR99 sur le guidage axonal a également été évalué en temps réel à l’aide d’un gradient créé par un micro injecteur placé à 45° et à 100µm du cône de croissance. La distribution in vivo des récepteurs GPR91 et GPR99 sur la rétine a été étudié à l’aide d’expériences d’immunohistochimie. Les résultats obtenus indiquent que l’ajout de 100µM de succinate produit une augmentation de la taille des cônes de croissance et du nombre de filopodes présents à leur surface. Il augmente également la croissance des axones. Ce type de réponse fut également observé lorsque les cellules furent soumises à 200µM d’α-cétoglutarate. Fait à noter, les deux récepteurs n’ont pas d’impact sur le guidage axonal. Ces résultats indiquent donc que les agonistes des récepteurs GPR91 et GPR99 augmentent la croissance des cellules ganglionnaires lorsqu’ils sont présents lors du développement. Par contre, ils n’ont pas d’influence sur la direction prise par les cônes de croissance. Ces nouvelles données sont un pas de plus dans la compréhension des mécanismes qui gèrent et participent au développement et la croissance des CGRs, ce qui pourrait donner de nouvelles cibles thérapeutique pouvant mener à la régénération de nerfs optiques endommagés.

Patterns in the space use of the Bearded Reedling, Panurus biarmicus, on the Tay Reedbeds, Scotland

This thesis presents research into the space use of a specialist reedbed Passerine, the Bearded Reedling, or Bearded Tit, Panurus biarmicus, with a view to inform the conservation of this species and reedbeds as a whole. How a species uses space, and how space use changes between individuals or over time, can influence: the ability to forage and hunt effectively, breeding success, susceptibility to predation, genetic health, disease spread, robustness against environmental change and ultimately, colonisation or extinction. Thus, understanding the space use of animals can provide critical insight into ecological systems. Birds offer interesting models when studying animal space use, as, by being intrinsically mobile, many bird species can occupy multiple spatial scales. As a consequence of being completely dependent on patchy and ephemeral reedbed habitats, the Bearded Reedling, has a clustered, inhomogeneous distribution throughout its range. This drives the existence of distinct spatial scales upon which space use studies should be characterised. Distribution and movement within a single reedbed can be considered local-scale, while spatial processes between reedbeds can be considered wide-scale. Temporal processes may act upon both of these scales. For example, changing interactions with predators may influence nest positioning at a local-scale, while seasonal changes in resource requirements might drive processes such as migration at a wide-scale. The Bearded Reedling has a wide temperate breeding range, extending over much of Eurasia. On the IUCN’s red list, it is listed as ‘of least concern’, with an estimated European population between 240,000-480,000 breeding pairs. Despite its relatively favourable conservation status, its dependence on reedbed habitats drives a fragmented distribution, with populations being concentrated in small, isolated, stands. Over the last century reedbed wetlands have suffered rapid declines caused by drainage schemes undertaken to improve land for development or agriculture. Additionally, many remaining reed stands are subject to extensive commercial management to produce thatch or biofuel. Conversely, in other areas, management is driven by conservation motives which recognise the present threats to reedbeds, and aim to encourage the diversity of species associated with these habitats. As the Bearded Reedling is fundamentally linked to the quality and structure of a reed stand, understanding the space use of this species will offer information for the direct conservation of this specialist species, and for the effects of reedbed management as a whole. This thesis first presents studies of space use at a local-scale. All local-scale research is conducted at the Tay Reedbeds in eastern Scotland. Mist netting and bird ringing data are used within capture recapture models, which include an explicit spatial component, to gain insight into the abundance of the Bearded Reedling on the Tay. This abundance estimation approach suggests the Tay reedbeds are a stronghold for this species on the British Isles, and that, as a high latitude site, the Tay may have importance for range expansion. A combination of transect surveys and radio-tracking data are then used to establish the local-scale space use of this species during the breeding and autumnal seasons. These data are related to changes in the structure of reed caused by local management in the form of mosaic winter reed cutting. Results suggest that birds exploit young and cut patches of reed as foraging resources when they are available, and that old, unmanaged reed is critical for nesting and winter foraging. Further local-scale studies concern the spatial patterns in the nesting habits of this species. Mosaic reed cutting creates clear edges in a reedbed. Artificial nests placed in the Tay Reedbeds demonstrate increased nest predation rates closer to the edges of cut patches. Additionally, high predation rates become reduced as the cut reed re-grows, suggesting that reed cutting may increase accessibility of the stand to predators. As Bearded Reedling nests are uncommon and difficult to locate, the timing, site selection and structure of a sample of real nests from the Tay is then detailed. These demonstrate an early, and relatively rigid breeding onset in this species, the importance of dense, compacted reeds as nesting sites and a degree of flexibility in nest structure. Conservation efforts will also benefit from studies into wide-scale spatial processes. These may be important when establishing how colonisation events occur and when predicting the effects of climatic change. The Bearded Reedling has been traditionally considered a resident species which only occasionally undertakes wide-scale, between-reedbed, movements. Indeed, the ecology of this species suggests strict year round local residency to reedbeds, with distinct seasonal changes in diet allowing occupation of these habitats year round. The European ringing recoveries of this species, since the 1970s are investigated to better characterise the wider movements of specialist resident. These suggest residency in southern populations, but higher instances of movement than expected in more northerly regions. In these regions wide-scale movement patterns resemble those of partial regular migratory species. An understanding of local and wide-scale spatial processes can offer a strong foundation on which to build conservation strategies. This thesis aims to use studies of space use to provide this foundation for the Bearded Reedling and offer further insight into the ecology of reedbed habitats as a whole. The thesis concludes by proposing an effective strategy for the conservation management of reedbeds that will especially benefit the Bearded Reedling.

Robots como ferramenta pedagógica nos primeiros anos

O presente artigo descreve e analisa um projeto realizado com duas turmas do 1o ciclo do ensino básico que trabalharam conjuntamente com robots, tomando a aprendizagem como um fenómeno intrinsecamente ligado à participação em comunidades de prática (Lave, 1996; Lave; Wenger, 1991). Pretende-se caracterizar os intervenientes, a metodologia de trabalho implementada, a descrição dos artefactos utilizados (robots e escrita de uma história) e analisar a relação dos intervenientes com os robots, os padrões de participação que se revelaram com esse tipo de trabalho, procurando enfatizar os contributos que decorrem da participação em ambientes sociais digitais para a aprendizagem dos alunos, tais como a participação e a negociação conjunta de significados, a importância dos robots e da história terem sido “construídos” pelos estudantes e a existência de um reportório partilhado e um empreendimento conjunto.