947 resultados para Harwood Heights
Resumo:
This work aimed to study evaporation distribution in a protected environment. The experiment was set up in polyethylene greenhouse at the Lageado Experimental Farm in the School of Agronomic Sciences (FCA, UNESP-Botucatu) in the winter of 2005. 132 500-ml plastic micro evaporimeters (13.7 diameter) were used used to obtain evaporation values and analyze spatial energy distribution. These micro evaporimeters were distributed in 44 equidistant points, at three different heights from the soil surface: 0.40, 0.80 and 1.20cm The tunnel-type greenhouse was 7.5 m wide, 27.5 m long and 3.20 m high at the center, and was covered with black shadow screen (sombrite) on the sides. Southeast/northwest orientation, based on true north, was used foro othe greenhouse longitudinal axis. For variable comparison, a geostatistics was used through the □GS+ program. From obtained data, it was concluded that: there was spatial variability at different points and heights of the microevaporation values obtained from micro evaporimeters were not greenhouse; the Class A Pan installed outside the greenhouse can be used to evaluate the internal evaporation.
Resumo:
This work aimed to study the energy distribution in protected environment during the winter of 2005. A plastic tunnel (27.5 m long, 7.5 m wide, 3.2 m high in the center and 2.00 m high in both lateral sides) was covered with polyethylene 100 micra and black shadow screen (sombrite) in lateral sides at the FCA/UNESP, Botucatu - SP. 142 minievaporimeters (500 ml volume and 147 cm2 area) were evenly distributed and set up at three heights: 0.40 m; 0.80 m and 1.20 m from soil surface in order to analyze energy distribution along the studied area. The greenhouse longitudinal axis was northwest/southeast, based on true north. Geosatistics principles and the GS+ Program were adopted to compare variables. From obtained results, it was concluded that there were significant evaporation variations at different points anf heights; the highest values were the ones closest to the soil surface (0.40m) in July and at highest heights (0.80 and 1.20m). Highest evaporations occurred in the southeastern side of the greenhouse.
Resumo:
Simulations of overshooting, tropical deep convection using a Cloud Resolving Model with bulk microphysics are presented in order to examine the effect on the water content of the TTL (Tropical Tropopause Layer) and lower stratosphere. This case study is a subproject of the HIBISCUS (Impact of tropical convection on the upper troposphere and lower stratosphere at global scale) campaign, which took place in Bauru, Brazil (22° S, 49° W), from the end of January to early March 2004. Comparisons between 2-D and 3-D simulations suggest that the use of 3-D dynamics is vital in order to capture the mixing between the overshoot and the stratospheric air, which caused evaporation of ice and resulted in an overall moistening of the lower stratosphere. In contrast, a dehydrating effect was predicted by the 2-D simulation due to the extra time, allowed by the lack of mixing, for the ice transported to the region to precipitate out of the overshoot air. Three different strengths of convection are simulated in 3-D by applying successively lower heating rates (used to initiate the convection) in the boundary layer. Moistening is produced in all cases, indicating that convective vigour is not a factor in whether moistening or dehydration is produced by clouds that penetrate the tropopause, since the weakest case only just did so. An estimate of the moistening effect of these clouds on an air parcel traversing a convective region is made based on the domain mean simulated moistening and the frequency of convective events observed by the IPMet (Instituto de Pesquisas Meteorológicas, Universidade Estadual Paulista) radar (S-band type at 2.8 Ghz) to have the same 10 dBZ echo top height as those simulated. These suggest a fairly significant mean moistening of 0.26, 0.13 and 0.05 ppmv in the strongest, medium and weakest cases, respectively, for heights between 16 and 17 km. Since the cold point and WMO (World Meteorological Organization) tropopause in this region lies at ∼ 15.9 km, this is likely to represent direct stratospheric moistening. Much more moistening is predicted for the 15-16 km height range with increases of 0.85-2.8 ppmv predicted. However, it would be required that this air is lofted through the tropopause via the Brewer Dobson circulation in order for it to have a stratospheric effect. Whether this is likely is uncertain and, in addition, the dehydration of air as it passes through the cold trap and the number of times that trajectories sample convective regions needs to be taken into account to gauge the overall stratospheric effect. Nevertheless, the results suggest a potentially significant role for convection in determining the stratospheric water content. Sensitivity tests exploring the impact of increased aerosol numbers in the boundary layer suggest that a corresponding rise in cloud droplet numbers at cloud base would increase the number concentrations of the ice crystals transported to the TTL, which had the effect of reducing the fall speeds of the ice and causing a ∼13% rise in the mean vapour increase in both the 15-16 and 16-17 km height ranges, respectively, when compared to the control case. Increases in the total water were much larger, being 34% and 132% higher for the same height ranges, but it is unclear whether the extra ice will be able to evaporate before precipitating from the region. These results suggest a possible impact of natural and anthropogenic aerosols on how convective clouds affect stratospheric moisture levels.
Resumo:
The energy efficiency of buildings should be a goal at the pre-design phase, though the importance of the design variables is often neglected even during the design process. Highlighting the relevance of these design variables, this research studies the relationships of building location variables with the electrical energy consumption of residential units. The following building design parameters are considered: orientation, story height and sky view factor (SVF). The consideration of the SVF as a location variable contributes to the originality of this research. Data of electrical energy consumption and users' profiles were collected and several variables were considered for the development of an Artificial Neural Network model. This model allows the determination of the relative importance of each variable. The results show that the apartments' orientation is the most important design variable for the energy consumption, although the story height and the sky view factor play a fundamental role in that consumption too. We pointed out that building heights above twenty-four meters do not optimize the energy efficiency of the apartments and also that an increasing SVF can influence the energy consumption of an apartment according to their orientation.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The aim of this study was to investigate the genetic variation, the genotype × soil interaction and the selection among and within Corymbia citriodora progenies in three different kinds of soils (Red Latossol, Quartz Sand and Purple Latossol), which occur in the Luiz Antônio Experimental Station, São Paulo State, Brazil. The progeny test was established 1983, using 56 open-pollinated families of C. citriodora. Twenty fve years after planting the following traits were measured: height, diameter at breast height (Dbh), stem form and survival. Best growth occurred in Purple Latossol. Significant differences among progenies were detected for most traits in all sites, suggesting the possibility of improvement by selection. In the analysis with sites, Significant differences among locals, progenies and genotypes × soil interaction were detected, confiming that the tested material has sufficient genetic variation to be explored by selection in all sites. The analysis of genotype × soil interaction indicates that growth traits present single interaction and the same progenies can be selected in each site. On the order hand, genotype × soil interaction for stem form and survival was complex; and specifc progenies need to be selected for each kind of soil. The population, due to its high genetic variation and strong genetic control of traits, permits to obtain considerable genetic gains by selection among and within progenies.
Resumo:
The purpose of this study was to analyze aging effects on the perceptual and motor aspects involved in the sit-to-stand and stand-to-sit actions. Young and older individuals were videotaped while performing those actions on a chair adjusted with seven seat heights. Participants estimated, for each seat height, the difficulty/facility perceived while performing the sit-to-stand and stand-to-sit actions. Older individuals exhibited changes in the control strategy used for sitting at the lowest seat height, and overestimated the degree of difficulty/facility involved in performing both actions. In general, the degree of easiness perceived by older individuals at the lowest seat height disagrees with the degree of difficulty exhibited during the motor performance of this task.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The central and western parts of the State of São Paulo are well-known for vast sugar cane plantations, which during the harvest time are traditionally burnt about 12 hours before manual cutting. This procedure causes the release of large quantities of aerosols and a variety of gases, which can be observed by IPMet's radars, located in Bauru and Presidente Prudente, on days with no or little rain. Depending on the distance of these plumes from the radar, they can be detected up to 5 km amsl or more, and are subsequently being transported by winds to other regions. During the dry winter season of 2008, such plumes, attributed to cane fires, were frequently observed by IPMet's radars and documented in terms of radar reflectivity, time and location during the period 10 th - 21 st July 2008. At the same time, IPEN's Elastic Backscatter Lidar in São Paulo observed layers of aerosols of variable strength and heights above the city. The most significant days, viz. 14 and 15 July 2008 had been selected for calculating backward, as well as forward trajectories, deploying the European Flextra 3.3 Trajectory Model, which was initiated with ECMWF historic data with a 0,25 o×0,25 o grid spacing. The results presented here show an excellent match between the radar-detected sources of the plumes on 11 th July 2008 in the central parts of the State and the observations by IPEN's Lidar over Metropolitan São Paulo on 14 th July 2008, both in terms of forward and backward trajectories, as well as their heights, with a transport duration of approximately 70 hours under the prevailing meteorological conditions. © Sociedad Española de Óptica.
Resumo:
Background. Morphological and dentofacial alterations have been attributed to impaired respiratory function. Objective. To examine the influence of mouth breathing (MB) on children facial morphology before and after adenoidectomy or adenotonsillectomy. Methods. Thirty-three MB children who restored nasal breathing (NB) after surgery and 22 NB children were evaluated. Both groups were submitted to lateral cephalometry, at time 1 (T1) before and at time 2 (T2) 28months on average postoperatively. Results. Comparison between the MB and NB groups at T1 showed that mouth breathers had higher inclination of the mandibular plane; more obtuse gonial angle; dolichofacial morphology; and a decrease in the total and inferior posterior facial heights. Twenty-eight months after the MB surgical intervention, they still presented a dolichofacial morphologic pattern. During this period, MB altered the face growth direction and decreased their mandible plane inclination, with reduction in the SN.GoGn, PP.MP, SNGn, and ArGo.GoMe parameters as well as an increase in BaN.PtGn. Conclusion. After the MB rehabilitation, children between 3 and 6years old presented significant normalization in the mandibular growth direction, a decrease in the mandible inclination, and an increase in the posterior facial height. Instead, they still persisted with a dolichofacial pattern when compared with nasal breathers. © 2011 The Authors. International Journal of Paediatric Dentistry © 2011 BSPD, IAPD and Blackwell Publishing Ltd.
Resumo:
The Irrigameter is aevapotranspiration measuring device used in irrigation management to optimize water. However, its use requires a prior adjustment to weather conditions where it will be used. The objective of this study was identify the corresponding height of water level inside the evaporimeterIrrigameter that estimate reference evapotranspiration in climate of the plateau of Vitoria da Conquista - BA, in different seasons. The experiment was a completely randomized design with five treatments and three replications. For each treatment was determined an average coefficient for the Irrigameter called K I, calculated as the ratio of estimated evapotranspiration in Irrigameter (ET I) and reference evapotranspiration (ET 0). The ET 0 was obtained by the Penman-Monteith - FAO 56. The results showed that the coefficients of Irrigameter increased exponentially with increasing water level inside the evaporimeter, and the equipment must be operated with the water level equal to 5.2 cm for better estimation of ET 0. The remaining heights observed in different seasons showed no significant difference when compared to annual average used as a reference in this study.
Resumo:
The use and inadequate exploitation of natural resources is restricting the occurrence of aroeira (Myracrodruon urundeuva F.F. & M.F. Allemão), which now is on the FAO list of endangered species. This exploitation causes a decrease in the genetic base of M. urundeuva populations, which makes it difficult to find genotypes with stability and adaptability to different growing conditions. This study aimed at estimating the genetic variation and productivity, stability and adaptability of progenies of a M. urundeuva natural population, from the Ecological Station of Paulo de Faria-SP, under different planting systems. DBH (diameter at breast height) was evaluated in four progeny tests of M. urundeuva: i) planted with Anandenanthera falcata and Guazuma ulmifolia (TP-AMA); ii) single (TP-ASO); iii) planted with annual crops (TP-SAF) and iv) planted with Corymbia citriodora (TP-EUCA), installed in Selvíria-MS. The experimental design consisted of complete randomized blocks with three replications and a variable number of plants per plot in each of the four planting systems. From the joint analysis of the planting systems studied, it was found that: i) there were variations among planting systems particularly in TP-SAF; ii) only in TP-EUCA it was possible to detect variations among the progenies; iii) the effects of the genotype x environment interaction were not significant. Thereby, the harmonic mean of genotypic values (MHVG), the relative performance of genotypic values from the mean of each site (PRVG) and the harmonic mean of the relative performance of genotypic values (MHPRVG) for DBH showed, respectively: progenies with greater stability, adaptability, and stability and simultaneous adaptability within different planting systems. The use of these selection criteria provided a more refined selection of the best progenies of M. urundeuva under the different planting systems studied.
Resumo:
Intensive deforestation and forest fragmentation of the Brazilian forest biomes has contributed to increase the number of trees species under the risk of extinction. Peltophorum dubium (Sprengel) Taubert is one of these species. Some of its populations are being conserved ex situ by the Instituto Florestal de São Paulo through provenance and progeny tests. The aim of this study was to investigate the genetic variation and to estimate genetic parameters at age 24 years in a progeny test of P. dubium established in Luiz Antônio, São Paulo State, Brazil. The trial was established in a random block design, with six replications, five plants per plot and 18 open-pollinated progenies. Measured were: diameter at breast height (DBH), height and stem form. The genetic parameters heritability, genetic variation and effective population size were estimated. Significant genetic differences were observed only for DBH. This trait also presented a high coefficient of genetic variation (CV g=4.8%) and heritability, especially among progeny means (h m 2=0.6607). This indicates that DBH is the most indicated trait for selection in the population. The effective population size conserved ex situ in the test was estimated to be 38.9. Concerning genetic conservation, although the effective population size in the test is small, the values of the genetic variation and of the heritability indicate that the ex situ population has sufficient genetic variation and potential to respond to changes promoted by natural and artificial selection.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Were evaluated the economic effects of four grazing heights (20, 40, 60 and 80 cm) of Tanzânia grass for beef cattle. The total area was 12 acres divided into paddocks of one hectare, with three replications. We used three animals, males, Nelore per paddock, as more animals need additional adjustment to the height you want. The reduction in sward height allowed higher stocking rate, which, even with a reduction in individual performance, there was more beef production per area. The interest rate on capital given the property represented the largest share in the final cost of production. The participation of fixed variables showed a positive linear function of the increase in height from grazing, showing significant reduction of the production scale. A reduction in cost of production per hectare per year with increasing grazing height. No differences were found in certain economic indicators, and the four systems remunerate the capital invested.