Development, structure and distribution of colleters in Mandevilla illustris and M. velutina (Apocynaceae)

Colleters of Mandevilla illustris and M. velutina are present on the cotyledons, shoot apices, mature leaves and on the nodal region, where they are interpetiolar and intrapetiolar. In M. velutina there are two colleters on the adaxial basal part of the leaf blade, and in M. illustris, this number varies. The differentiation of the colleters occurs in the early stages of leaf development. When colleters are mature, they consist of a long head on a short stalk. The central core of the colleter is made up of parenchymatous cells that may exhibit phenolic compounds and is surrounded by radially elongated epithelial cells. The foliar and intrapetiolar colleters can exhibit vascularization. The colleters produce a translucient sticky substance that reacts positively to polysaccharides and, before senescence, they produce lipophilic substances. The Mandevilla colleters data can give support to the taxonomy and phylogeny of the Apocynaceae.

Effects of iron-ore particles on propagule release, growth and photosynthetic performance of Sargassum vulgare C. Agardh (Phaeophyta, Fucales)

The effect of iron-ore particles on the propagule release and growth of Sargassum vulgare C. Agardh was tested under treatments with different concentrations of iron-ore particles: 0.1, 1.0, 10.0 g.L-1 and a solution of 10.0 g.L-1 of filtered iron-ore. Filtered seawater was used as control. Photosynthesis vs. irradiance (P-I) curves were calculated for S. vulgare in the presence of iron-ore and in seawater. There was no significant difference in the number of propagules released by the receptacles or in the percentage of zygote formation among the treatments. The released propagules acted like aggregation centers for the particles, those more heavily coated with iron (10.0 g.L-1) exhibiting the highest sinking velocity (32.6 ± 9.8 mm.s-1). No difference in the percentage of embryo survival was detected during the first week in culture. After four weeks the embryos grew in all treatments. Maximum frond development (5.3 ± 0.8 mm) was observed in treatment of seawater enriched with Provasoli's medium (PES) while initial filoids did not develop in three treatments without PES and with iron-ore (0.1 g.L-1, 1.0 g.L-1 and 10.0 g.L-1). The values for Pmax, alpha and respiration showed no significant differences between the P-I curves. The calculated value for I K was 106.26 µmol.m-2.s-1 to the control curve and 981.49 µmol.m-2.s-1 to the iron-ore curve. The results indicate that the iron-ore particles in high concentration reduce the growth of S. vulgare as they recovered the embryos, juveniles and young plants. In contrast, the presence of the particles did not affect the release of gametes, percentage of zygote formation or the percentage of embryo survival.

Structure and dynamics of a woody plant community of a tropical semi-deciduous seasonal forest in the "Estação Ecológica do Panga", municipality of Uberlândia, Minas Gerais, Brazil

Studies of plant community dynamics are essential in understanding the demographic patterns of species since changes in demographic rates can affect the floristic composition and future structure. The purpose of the present study was to analyze the changes in the community structure and floristic composition of woody plants in a tropical semi-deciduous forest in Uberlândia in central Brazil, during a 10-years period. The data were collected in 1989 and in 2000 in 50 quadrats (10 m x 10 m) where all trees with a minimum circumference at breast height of 10 cm were sampled. In 1989, 93 species and 1103 individuals were registered. Over a period of 10 years, seven new species were added to the community, although eight disappeared. The main change that occurred during this period in the floristic composition was the replacement of savannah species occurring in forest gaps by those from the forest understory.

Floristics, structure and soil of insular vegetation in four quartzite-sandstone outcrops of "Chapada Diamantina", Northeast Brazil

Soil islands on rocky surfaces often harbor aggregated vegetation that consists of insular plant communities. These islands are typical of the rocky outcrops and in various parts of Brazil form the so-called "campos rupestres" vegetation. Four of such sites have been selected in the state of Bahia, Northeast Brazil, for this comparative study on floristics and vegetation structure: three areas situated inside the "Parque Nacional da Chapada Diamantina" (Guiné, Fumaça and "Gerais da Fumaça") and one is at the border of the Environmental Protection Area of "Marimbus-Iraquara" ("Mãe Inácia"). All occurring vegetation islands were studied in four random plots of 10 × 10 m per site. Soil was often shallow, sandy and acidic. Vascular plant species were determined, with respective life forms and canopy coverage areas. The total number of species when all four sites were added was 135, and the number of species per island varied from 2 to 32. The areas of the 214 soil islands varied from 0.015 to 91.9 m², totaling 568 m² in the four sites. Monocotyledon families were dominant, essentially Velloziaceae, as well as Orchidaceae, Bromeliaceae, Amaryllidaceae and Cyperaceae. Among the eudicotyledons, dominant families were mainly Clusiaceae, Asteraceae and Melastomataceae. The biological spectra revealed that phanerophytes and hemicryptophytes predominated among the life forms, while chamaephytes had the largest coverage area. Epilithic and desiccant chamaephytes composed the most conspicuous interspecific associations, and were probably related to early successional processes. Sites closest to one another were not the most similar in structure, indicating that other factors more relevant than distance might be involved in the abundance of species in space.

Cooperative strategy in emerging markets - analysis of interfirm r&d cooperation and performance in Russian manufacturing companies

Emerging markets have come to play a significant role in the world, not only due to their strong economic growth but because they have been able to foster an increasing number of innovative high technology oriented firms. However, as the markets continue to change and develop, there remain many companies in emerging markets that struggle with their competitiveness and innovativeness. To improve competitive capabilities, many scholars have come to favor interfirm cooperation, which is perceived to help companies access new knowledge and complementary resources and, by so doing, enables them to catch up quickly with Western competitors. Regardless of numerous attempts by strategic management scholars, the research field remains very fragmented and lacks understanding on how and when interfirm cooperation contributes to firm performance and competiveness in emerging markets. Furthermore, the reasons why interfirm R&D sometimes succeeds but fails at other times frequently remain unidentified. This thesis combines the extant literature on competitive and cooperative strategy, dynamic capabilities, and R&D cooperation while studying interfirm R&D relationships in and between Russian manufacturing companies. Employing primary survey data, the thesis presents numerous novel findings regarding the effect of R&D cooperation and different types of R&D partner on firms’ exploration and exploitation performance. Utilizing a competitive strategy framework enables these effects to be explained in more detail, and especially why interfirm cooperation, regardless of its potential, has had a modest effect on the general competitiveness of emerging market firms. This thesis contributes especially to the strategic management literature and presents a more holistic perspective on the usefulness of cooperative strategy in emerging markets. It provides a framework through which it is possible to assess the potential impacts of different R&D cooperation partners and to clarify the causal relationships between cooperation, performance, and long term competitiveness.

Multivariate genetic divergence and hybrid performance of cacao (Theobroma cacao L.)

Genetic distances among cacao cultivars were calculated through multivariate analysis, using the D2 statistic, to examine racial group classification and to assess heterotic hybrids. A 5 x 5 complete diallel was evaluated. Over a five-year period (1986-1990), five cultivars of the S1 generation, pertaining to the Lower Amazon Forastero and Trinitario racial groups and 20 crosses between the corresponding S0 parents were analyzed, based upon five yield components - number of healthy and collected fruits per plant (NHFP and NCFP), wet seed weight per plant and per fruit (WSWP and WSWF), and percentage of diseased fruits per plant (PDFP). The diversity analysis suggested a close relationship between the Trinitario and Lower Amazon Forastero groups. A correlation coefficient (r) was calculated to determine the association between genetic diversity and heterosis. Genetic distance of parents by D2 was found to be linearly related to average performance of hybrids for WSWP and WSWF (r = 0.68, P < 0.05 and r = 0.76, P < 0.05, respectively). The heterotic performance for the same components was also correlated with D2, both with r = 0.66 (P < 0.05). A relationship between genetic divergence and combining ability effects was suggested because the most divergent cultivar exhibited a high general combining ability, generating the best performing hybrids. Results indicated that genetic diversity estimates can be useful in selecting parents for crosses and in assessing relationships among cacao racial groups.

Structure and function of the selectin ligand PSGL-1

P-selectin glycoprotein ligand-1 (PSGL-1) is a dimeric mucin-like 120-kDa glycoprotein on leukocyte surfaces that binds to P- and L-selectin and promotes cell adhesion in the inflammatory response. The extreme amino terminal extracellular domain of PSGL-1 is critical for these interactions, based on site-directed mutagenesis, blocking monoclonal antibodies, and biochemical analyses. The current hypothesis is that for high affinity interactions with P-selectin, PSGL-1 must contain O-glycans with a core-2 branched motif containing the sialyl Lewis x antigen (NeuAca2®3Galß1®4[Fuca1®3]GlcNAcß1®R). In addition, high affinity interactions require the co-expression of tyrosine sulfate on tyrosine residues near the critical O-glycan structure. This review addresses the biochemical evidence for this hypothesis and the evidence that PSGL-1 is an important in vivo ligand for cell adhesion.

Structure and function of the cystic fibrosis transmembrane conductance regulator

Cystic fibrosis (CF) is a lethal autosomal recessive genetic disease caused by mutations in the CF transmembrane conductance regulator (CFTR). Mutations in the CFTR gene may result in a defective processing of its protein and alter the function and regulation of this channel. Mutations are associated with different symptoms, including pancreatic insufficiency, bile duct obstruction, infertility in males, high sweat Cl-, intestinal obstruction, nasal polyp formation, chronic sinusitis, mucus dehydration, and chronic Pseudomonas aeruginosa and Staphylococcus aureus lung infection, responsible for 90% of the mortality of CF patients. The gene responsible for the cellular defect in CF was cloned in 1989 and its protein product CFTR is activated by an increase of intracellular cAMP. The CFTR contains two membrane domains, each with six transmembrane domain segments, two nucleotide-binding domains (NBDs), and a cytoplasmic domain. In this review we discuss the studies that have correlated the role of each CFTR domain in the protein function as a chloride channel and as a regulator of the outwardly rectifying Cl- channels (ORCCs).

Gap junctions in cells of the immune system: structure, regulation and possible functional roles

Gap junction channels are sites of cytoplasmic communication between contacting cells. In vertebrates, they consist of protein subunits denoted connexins (Cxs) which are encoded by a gene family. According to their Cx composition, gap junction channels show different gating and permeability properties that define which ions and small molecules permeate them. Differences in Cx primary sequences suggest that channels composed of different Cxs are regulated differentially by intracellular pathways under specific physiological conditions. Functional roles of gap junction channels could be defined by the relative importance of permeant substances, resulting in coordination of electrical and/or metabolic cellular responses. Cells of the native and specific immune systems establish transient homo- and heterocellular contacts at various steps of the immune response. Morphological and functional studies reported during the last three decades have revealed that many intercellular contacts between cells in the immune response present gap junctions or "gap junction-like" structures. Partial characterization of the molecular composition of some of these plasma membrane structures and regulatory mechanisms that control them have been published recently. Studies designed to elucidate their physiological roles suggest that they might permit coordination of cellular events which favor the effective and timely response of the immune system.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Performance of two-dimensional Doppler echocardiography for the assessment of infarct size and left ventricular function in rats

Although echocardiography has been used in rats, few studies have determined its efficacy for estimating myocardial infarct size. Our objective was to estimate the myocardial infarct size, and to evaluate anatomic and functional variables of the left ventricle. Myocardial infarction was produced in 43 female Wistar rats by ligature of the left coronary artery. Echocardiography was performed 5 weeks later to measure left ventricular diameter and transverse area (mean of 3 transverse planes), infarct size (percentage of the arc with infarct on 3 transverse planes), systolic function by the change in fractional area, and diastolic function by mitral inflow parameters. The histologic measurement of myocardial infarction size was similar to the echocardiographic method. Myocardial infarct size ranged from 4.8 to 66.6% when determined by histology and from 5 to 69.8% when determined by echocardiography, with good correlation (r = 0.88; P < 0.05; Pearson correlation coefficient). Left ventricular diameter and mean diastolic transverse area correlated with myocardial infarct size by histology (r = 0.57 and r = 0.78; P < 0.0005). The fractional area change ranged from 28.5 ± 5.6 (large-size myocardial infarction) to 53.1 ± 1.5% (control) and correlated with myocardial infarct size by echocardiography (r = -0.87; P < 0.00001) and histology (r = -0.78; P < 00001). The E/A wave ratio of mitral inflow velocity for animals with large-size myocardial infarction (5.6 ± 2.7) was significantly higher than for all others (control: 1.9 ± 0.1; small-size myocardial infarction: 1.9 ± 0.4; moderate-size myocardial infarction: 2.8 ± 2.3). There was good agreement between echocardiographic and histologic estimates of myocardial infarct size in rats.

Evaluating Performance of Content Marketing: YouTube Marketing in Finnish Food and Drink Industry

The purpose of this research was to define content marketing and to discover how content marketing performance can be measured especially on YouTube. Further, the aim was to find out what companies are doing to measure content marketing and what kind of challenges they face in the process. In addition, preferences concerning the measurement were examined. The empirical part was conducted through multiple-case study and cross-case analysis methods. The qualitative data was collected from four large companies in Finnish food and drink industry through semi-structured phone interviews. As a result of this research, a new definition for content marketing was derived. It is suggested that return on objective, or in this case, brand awareness and engagement are used as the main metrics of content marketing performance on YouTube. The major challenge is the nature of the industry, as companies cannot connect the outcome directly to sales.

The oral motor capacity and feeding performance of preterm newborns at the time of transition to oral feeding

The objective of the present study was to determine the oral motor capacity and the feeding performance of preterm newborn infants when they were permitted to start oral feeding. This was an observational and prospective study conducted on 43 preterm newborns admitted to the Neonatal Intensive Care Unit of UFSM, RS, Brazil. Exclusion criteria were the presence of head and neck malformations, genetic disease, neonatal asphyxia, intracranial hemorrhage, and kernicterus. When the infants were permitted to start oral feeding, non-nutritive sucking was evaluated by a speech therapist regarding force (strong vs weak), rhythm (rapid vs slow), presence of adaptive oral reflexes (searching, sucking and swallowing) and coordination between sucking, swallowing and respiration. Feeding performance was evaluated on the basis of competence (defined by rate of milk intake, mL/min) and overall transfer (percent ingested volume/total volume ordered). The speech therapist's evaluation showed that 33% of the newborns presented weak sucking, 23% slow rhythm, 30% absence of at least one adaptive oral reflex, and 14% with no coordination between sucking, swallowing and respiration. Mean feeding competence was greater in infants with strong sucking fast rhythm. The presence of sucking-swallowing-respiration coordination decreased the days for an overall transfer of 100%. Evaluation by a speech therapist proved to be a useful tool for the safe indication of the beginning of oral feeding for premature infants.

Cognitive performance of young and elderly subjects on the free word recall memory test: effect of presentation order on recall order

The influence of aging on memory has been extensively studied, but the importance of short-term memory and recall sequence has not. The objective of the current study was to examine the recall order of words presented on lists and to determine if age affects recall sequence. Physically and psychologically healthy male subjects were divided into two groups according to age, i.e., 23 young subjects (20 to 30 years) and 50 elderly subjects (60 to 70 years) submitted to the Wechsler Adult Intelligence Scale-Revised and the free word recall test. The order of word presentation significantly affected the 3rd and 4th words recalled (P < 0.01; F = 14.6). In addition, there was interaction between the presentation order and the type of list presented (P < 0.05; F = 9.7). Also, both groups recalled the last words presented from each list (words 13-15) significantly more times 3rd and 4th than words presented in all remaining positions (P < 0.01). The order of word presentation also significantly affected the 5th and 6th words recalled (P = 0.05; F = 7.5) and there was a significant interaction between the order of presentation and the type of list presented (P < 0.01; F = 20.8). The more developed the cognitive functions, resulting mainly from formal education, the greater the cognitive reserve, helping to minimize the effects of aging on the long-term memory (episodic declarative).