Investigação dos processos hidrossedimentológicos em parcela experimental no semi-árido potiguar

In northeastern semiarid, seasonality on precipitation temporal distribution, high intensity storm events and inadequate management of native vegetation can promote soil erosion. Vegetation removal causes soil surface exposure, reduces soil water storage capacity and can be the source degradation processes. In this context, this approach aims to analyze water and soil erosion processes on a 250 m2 undisturbed experimental plot with native vegetation, slope 2.5% by using 2006 and 2007 monitoring data. The site was instrumented to monitor rainfall, overland flow runoff and erosion by using a 5 m³ tank downstream the plot. Soil erosion monitoring was made by transported sediment and organic matter collection after each event. Field infiltration experiments were made at 16 points randomly distributed within the plot area by using a constant head infiltrometer during drought and rainy seasons, respectively. Infiltration data revealed high spatial and temporal variability. It was observed that during the beginning of the rainy period, 77% of the events showed runoff coefficient less than 0.05. As the rainy season began, soil water increase produced annual species germination. High intensity storms resulted in runoff coefficients varying between 0.33 and 0.42. Once the annual species was established, it was observed that approximately 39% of the events produced no runoff, which reflects an increase on soil water retention capacity caused by the vegetation. A gradual runoff reduction during the rainy season emphasizes the effect of vegetative density increase. Soil erosion observed data allowed to fit an empirical relationship involving soil loss and precipitation height, which was used to analyze the plot installation impact on soil erosion. Observed soil loss in 2006 and 2007 was 230 Kg/ha and 54 Kg/ha, respectively

Análise da precipitação no semi-árido potiguar

The semiarid rainfall regime is northeastern Brazil is highly variable. Climate processes associated with rainfall are complex and their effects may represent extreme situations of drought or floods, which can have adverse effects on society and the environment. The regional economy has a significant agricultural component, which is strongly influenced by weather conditions. Maximum precipitation analysis is traditionally performed using the intensity-duration-frequency (IDF) probabilistic approach. Results from such analysis are typically used in engineering projects involving hydraulic structures such as drainage network systems and road structures. On the other hand, precipitation data analysis may require the adoption of some kind of event identification criteria. The minimum inter-event duration (IMEE) is one of the most used criteria. This study aims to analyze the effect of the IMEE on the obtained rain event properties. For this purpose, a nine-year precipitation time series (2002- 2011) was used. This data was obtained from an automatic raingauge station, installed in an environmentally protected area, Ecological Seridó Station. The results showed that adopted IMEE values has an important effect on the number of events, duration, event height, mean rainfall rate and mean inter-event duration. Furthermore, a higher occurrence of extreme events was observed for small IMEE values. Most events showed average rainfall intensity higher than 2 mm.h-1 regardless of IMEE. The storm coefficient of advance was, in most cases, within the first quartile of the event, regardless of the IMEE value. Time series analysis using partial time series made it possible to adjust the IDF equations to local characteristics

RINEX_HO: second- and third-order ionospheric corrections for RINEX observation files

When GNSS receivers capable of collecting dual-frequency data are available, it is possible to eliminate the first-order ionospheric effect in the data processing through the ionosphere-free linear combination. However, the second- and third-order ionospheric effects still remain. The first-, second- and third-order ionospheric effects are directly proportional to the total electron content (TEC), although the second- and third-order effects are influenced, respectively, by the geomagnetic field and the maximum electron density. In recent years, the international scientific community has given more attention to these kinds of effects and some works have shown that for high precision GNSS positioning these effects have to be taken into consideration. We present a software tool called RINEX_HO that was developed to correct GPS observables for second- and third-order ionosphere effects. RINEX_HO requires as input a RINEX observation file, then computes the second- and third-order ionospheric effects, and applies the corrections to the original GPS observables, creating a corrected RINEX file. The mathematical models implemented to compute these effects are presented, as well as the transformations involving the earth's magnetic field. The use of TEC from global ionospheric maps and TEC calculated from raw pseudorange measurements or pseudoranges smoothed by phase is also investigated.

Higher order ionospheric effects in GNSS positioning in the European region

After removal of the Selective Availability in 2000, the ionosphere became the dominant error source for Global Navigation Satellite Systems (GNSS), especially for the high-accuracy (cm-mm) demanding applications like the Precise Point Positioning (PPP) and Real Time Kinematic (RTK) positioning.The common practice of eliminating the ionospheric error, e. g. by the ionosphere free (IF) observable, which is a linear combination of observables on two frequencies such as GPS L1 and L2, accounts for about 99% of the total ionospheric effect, known as the first order ionospheric effect (Ion1). The remaining 1% residual range errors (RREs) in the IF observable are due to the higher - second and third, order ionospheric effects, Ion2 and Ion3, respectively. Both terms are related with the electron content along the signal path; moreover Ion2 term is associated with the influence of the geomagnetic field on the ionospheric refractive index and Ion3 with the ray bending effect of the ionosphere, which can cause significant deviation in the ray trajectory (due to strong electron density gradients in the ionosphere) such that the error contribution of Ion3 can exceed that of Ion2 (Kim and Tinin, 2007).The higher order error terms do not cancel out in the (first order) ionospherically corrected observable and as such, when not accounted for, they can degrade the accuracy of GNSS positioning, depending on the level of the solar activity and geomagnetic and ionospheric conditions (Hoque and Jakowski, 2007). Simulation results from early 1990s show that Ion2 and Ion3 would contribute to the ionospheric error budget by less than 1% of the Ion1 term at GPS frequencies (Datta-Barua et al., 2008). Although the IF observable may provide sufficient accuracy for most GNSS applications, Ion2 and Ion3 need to be considered for higher accuracy demanding applications especially at times of higher solar activity.This paper investigates the higher order ionospheric effects (Ion2 and Ion3, however excluding the ray bending effects associated with Ion3) in the European region in the GNSS positioning considering the precise point positioning (PPP) method. For this purpose observations from four European stations were considered. These observations were taken in four time intervals corresponding to various geophysical conditions: the active and quiet periods of the solar cycle, 2001 and 2006, respectively, excluding the effects of disturbances in the geomagnetic field (i.e. geomagnetic storms), as well as the years of 2001 and 2003, this time including the impact of geomagnetic disturbances. The program RINEX_HO (Marques et al., 2011) was used to calculate the magnitudes of Ion2 and Ion3 on the range measurements as well as the total electron content (TEC) observed on each receiver-satellite link. The program also corrects the GPS observation files for Ion2 and Ion3; thereafter it is possible to perform PPP with both the original and corrected GPS observation files to analyze the impact of the higher order ionospheric error terms excluding the ray bending effect which may become significant especially at low elevation angles (Ioannides and Strangeways, 2002) on the estimated station coordinates.

Global dynamics of the Rikitake system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analytical attitude prediction of spin stabilized spacecrafts perturbed by magnetic residual torque

An analytical approach for spin-stabilized spacecraft attitude prediction is presented for the influence of the residual magnetic torques. Assuming an inclined dipole model for the Earth's magnetic field, an analytical averaging method is applied to obtain the mean residual torque every orbital period. The orbit mean anomaly is utilized to compute the average components of residual torque in the spacecraft body frame reference system. The theory is developed for time variations in the orbital elements, and non-circular orbits, giving rise to many curvature integrals. It is observed that the residual magnetic torque does not have component along the spin axis. The inclusion of this torque on the rotational motion differential equations of a spin stabilized spacecraft yields conditions to derive an analytical solution. The solution shows that residual torque does not affect the spin velocity magnitude, contributing only for the precession and the drift of the spin axis of the spacecraft. (c) 2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

Estudo da viabilidade do desenvolvimento de sistemas integrados baseados em redes em chip sem processadores: sistema IPNoSys

The increase of capacity to integrate transistors permitted to develop completed systems, with several components, in single chip, they are called SoC (System-on-Chip). However, the interconnection subsystem cans influence the scalability of SoCs, like buses, or can be an ad hoc solution, like bus hierarchy. Thus, the ideal interconnection subsystem to SoCs is the Network-on-Chip (NoC). The NoCs permit to use simultaneous point-to-point channels between components and they can be reused in other projects. However, the NoCs can raise the complexity of project, the area in chip and the dissipated power. Thus, it is necessary or to modify the way how to use them or to change the development paradigm. Thus, a system based on NoC is proposed, where the applications are described through packages and performed in each router between source and destination, without traditional processors. To perform applications, independent of number of instructions and of the NoC dimensions, it was developed the spiral complement algorithm, which finds other destination until all instructions has been performed. Therefore, the objective is to study the viability of development that system, denominated IPNoSys system. In this study, it was developed a tool in SystemC, using accurate cycle, to simulate the system that performs applications, which was implemented in a package description language, also developed to this study. Through the simulation tool, several result were obtained that could be used to evaluate the system performance. The methodology used to describe the application corresponds to transform the high level application in data-flow graph that become one or more packages. This methodology was used in three applications: a counter, DCT-2D and float add. The counter was used to evaluate a deadlock solution and to perform parallel application. The DCT was used to compare to STORM platform. Finally, the float add aimed to evaluate the efficiency of the software routine to perform a unimplemented hardware instruction. The results from simulation confirm the viability of development of IPNoSys system. They showed that is possible to perform application described in packages, sequentially or parallelly, without interruptions caused by deadlock, and also showed that the execution time of IPNoSys is more efficient than the STORM platform

Simulação de reservatórios de petróleo em ambiente MPSoC

The constant increase of complexity in computer applications demands the development of more powerful hardware support for them. With processor's operational frequency reaching its limit, the most viable solution is the use of parallelism. Based on parallelism techniques and the progressive growth in the capacity of transistors integration in a single chip is the concept of MPSoCs (Multi-Processor System-on-Chip). MPSoCs will eventually become a cheaper and faster alternative to supercomputers and clusters, and applications developed for these high performance systems will migrate to computers equipped with MP-SoCs containing dozens to hundreds of computation cores. In particular, applications in the area of oil and natural gas exploration are also characterized by the high processing capacity required and would benefit greatly from these high performance systems. This work intends to evaluate a traditional and complex application of the oil and gas industry known as reservoir simulation, developing a solution with integrated computational systems in a single chip, with hundreds of functional unities. For this, as the STORM (MPSoC Directory-Based Platform) platform already has a shared memory model, a new distributed memory model were developed. Also a message passing library has been developed folowing MPI standard

Projeto e implementação de uma plataforma MP-SoC usando SystemC

This work presents the concept, design and implementation of a MP-SoC platform, named STORM (MP-SoC DirecTory-Based PlatfORM). Currently the platform is composed of the following modules: SPARC V8 processor, GPOP processor, Cache module, Memory module, Directory module and two different modles of Network-on-Chip, NoCX4 and Obese Tree. All modules were implemented using SystemC, simulated and validated, individually or in group. The modules description is presented in details. For programming the platform in C it was implemented a SPARC assembler, fully compatible with gcc s generated assembly code. For the parallel programming it was implemented a library for mutex managing, using the due assembler s support. A total of 10 simulations of increasing complexity are presented for the validation of the presented concepts. The simulations include real parallel applications, such as matrix multiplication, Mergesort, KMP, Motion Estimation and DCT 2D

Sistema operacional e biblioteca de funções para plataformas MPSOC: um estudo de caso para simuladores de reservatórios

The increasingly request for processing power during last years has pushed integrated circuit industry to look for ways of providing even more processing power with less heat dissipation, power consumption, and chip area. This goal has been achieved increasing the circuit clock, but since there are physical limits of this approach a new solution emerged as the multiprocessor system on chip (MPSoC). This approach demands new tools and basic software infrastructure to take advantage of the inherent parallelism of these architectures. The oil exploration industry has one of its firsts activities the project decision on exploring oil fields, those decisions are aided by reservoir simulations demanding high processing power, the MPSoC may offer greater performance if its parallelism can be well used. This work presents a proposal of a micro-kernel operating system and auxiliary libraries aimed to the STORM MPSoC platform analyzing its influence on the problem of reservoir simulation

PENNSYLVANIAN HETEROCONCHIA (MOLLUSCA, BIVALVIA) FROM THE PIAUI FORMATION, PARNAIBA BASIN, BRAZIL

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

SYSTEMATICS, TAPHONOMY, and PALEOECOLOGY of HOMALONOTID TRILOBITES (PHACOPIDA) FROM THE PONTA GROSSA FORMATION (DEVONIAN), PARANA BASIN, BRAZIL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tafonomia de tempestitos conchíferos amalgamados da formação Teresina em Rio Preto (Estado do Paraná, permiano médio, bacia do Paraná) e suas implicações paleoambientais

The deposits of the Permian Teresina Formation are mainly characterized by fi ne-grained siliciclastic rocks and centimetric intercalations of tempestites (bioclastic sandstones and coquinas). Despite the relevance of the bivalve-rich carbonate beds of the Teresina Formation to paleoenvironmental studies, their taphonomy is still poorly studied. The fossil concentration studied in this work was found in a quarry in the city of Irati, Rio Preto district, Parana State. The fossil concentration is located in the middle/upper portion of the unit, far from the top. The studied bed is a bioclastic, intraclastic, peloidal, grainstone/ packstone, with abundant bivalve shell fragments, pelitic and micritic intraclasts, peloids, rare ooids and oncoids, as well as permineralized of Lycophyta microphylles and fish scales. The grains of this carbonate concentration show: high degree of time-averaging, variable degree of packing (dense to disperse), no sorting and chaotic orientation. Notably, the concentration includes a mixture of elements which are indicative of: a) restrictive, low energy, carbonate environment (peloids, ooids and oncoids); b) subaerial environment surrounding the main body of water (Lycophyta microphylles) and c) quiet-water environment punctuated by storm events, where the suspension-feeding bivalves thrived. At least four depositional events caused by storm fl ows were recorded. The amalgamated nature of the bed is a result of storm events in an intracratonic basin with very low seafl oor slope and low rates of sedimentation and subsidence.

Tafonomia de biválvios em calcários oolíticos da formação Teresina (Bacia do Paraná, Permiano Médio, Prudentópolis, PR)

Herein, it is presented the first detailed taphonomic study on bivalve mollusk shells preserved in the oolitic limestones of the Teresina Formation (probably Kungurian-Roadian, Lower-Middle Permian) in the eastern margin of the Parana basin. The selected beds are located in two quarries (informally named PRU 1 and PRU 2) in Prudentopolis municipality (Center-South Parana State), and positioned approximately in the middle of the formation and probably in the Pinzonella illusa Zone. The PRU 1 limestone ([approximately]30 cm thick), which is partially silicified and intercalated with predominantly pelitic rocks, is classified as a bivalve oolitic grainstone. The basal contact is erosive and the top shows symmetrical ripple marks, which are draped by shale with mud cracks. There are two fining-upwards successions characterized by dense to dispersed packing of the shells, which are usually disarticulated, randomly oriented (many nested/stacked) and mixed with some Formapelitic intraclasts. Microhummocky cross-stratification occurs a little below the top of the bed. The PRU2 bed is classified as ooidbivalve rudstone[approximately] (~5 cm thick), where all shells are disarticulated and fragmented, showing dense packing. The bivalves probably inhabited a muddy substrate and were mixed (as parautochtonous and allochthonous bioclasts) with ooids during high-energy storm events, including posterior shell displacement as a result of bioturbation. Thus, the calcareous beds represent amalgamated proximal tempestites with a complex taphonomic history, strong temporal/spatial mixing of bioclasts and limited paleoecological resolution. They are a typical example of shell beds generated in a huge epeiric sea, which was not necessarily connected to the ocean and where very low depositional-slope gradient, very slow subsidence and minimum sediment accommodation space caused frequent sediment reworking by storm related processes.

Shell beds as paleoecological puzzles: A case study from the Upper Permian of the Parana Basin, Brazil

Microstratigraphic, sedimentological, and taphonomic features of the Ferraz Shell Bed, from the Upper Permian (Kazanian-Tatarian?) Corumbatai Formation of Rio Claro Region (the Parana Basin, Brazil), indicate that the bed consists of four distinct microstratigraphic units. They include, from bottom to top, a lag concentration (Unit 1), a partly reworked storm deposit (Unit 2), a rapidly deposited sandstone unit with three thin horizons recording episodes of reworking (Unit 3), and a shell-rich horizon generated by reworking/winnowing that was subsequently buried by storm-induced obrution deposit (Unit 4). The bioclasts of the Ferraz Shell Bed represent exclusively bivalve mollusks. Pinzonella illusa and Terraia aequilateralis are the dominant species. Taphonomic analysis indicates that mollusks are heavily time-averaged (except for some parts of Unit 3). Moreover, different species are time-averaged to a different degree (disharmonious time-averaging). The units differ statistically from one another in their taxonomic and ecological composition, in their taphonomic pattern, and in the size-frequency distributions of the two most common species. Other Permian shell beds of the Parana Basin are similar to the Ferraz Shell Bed in their faunal composition (they typically contain similar sets of 5 to 10 bivalve species) and in their taphonomic, sedimentologic, and microstratigraphic characteristics. However, rare shell beds that include 2-3 species only and are dominated by articulated shells preserved in life position also occur. Diversity levels in the Permian benthic associations of the Parana Basin were very low, with the point diversity of 2-3 species and with the within-habitat and basin-wide (alpha and gamma) diversities of 10 species, at most. The Parana Basin benthic communities may have thus been analogous to low-diversity bivalve-dominated associations of the present-day Baltic Sea. The 'Ferraz-type' shell beds of the Parana Basin represent genetically complex and highly heterogeneous sources of paleontological data. They are cumulative records of spectra of benthic ecosystems time-averaged over long periods of time (10(2)-10(4) years judging from actualistic research). Detailed biostratinomic reconstructions of shell beds can not only offer useful insights into their depositional histories, but may also allow paleoecologists to optimize their sampling designs, and consequently, refine paleoecological and paleoenvironmental interpretations.