Homeopathic Symphytum officinale increases removal torque and radiographic bone density around titanium implants in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

pH changes after manual or ultrasonic instrumentation and smear layer removal with EDTA or ultrasonic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Persistence of endodontic methacrylate-based cement residues on dentin adhesive surface treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of methacrylate-based cement residues on the dentin, after dentin surface cleaning with ethanol or acetone, with or without previous application of a dentin adhesive. Forty bovine crown fragments were obtained and the dentin surface was washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% ethylenediaminetetraacetic acid application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. In 20 specimens, previously to cement, a dentin adhesive was applied in all surfaces. After 15 min, the surface was scrubbed with a cotton pellet and moistened with ethanol or acetone, compounding the following groups: G199.5% ethanol and G2acetone, without previous use of dentin adhesive; G399.5% ethanol and G4acetone, with previous use of dentin adhesive. The dentin surface was scrubbed until the cement residues could not be visually detected. Sections were then processed for scanning electron microscopy and evaluated at 500x magnification and scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. The lower residue presence was observed in G3 (P = 0.005). All surface presented cement residues when acetone was used as cleaning solution (P = 0.0005). The cleaning solutions were unable to completely remove the cement residues from both surfaces. The ethanol used after previous application of the dentin adhesive promoted the lower presence of residues.

Persistence of resinous cement residues in dentin treated with different chemical removal protocols

The aim of this study was to evaluate the persistence of resin cement residues after dentin surface cleaning with different alcohol-based solutions or an essential oil (eucalyptol). Forty bovine teeth were sectioned in order to expose pulp chamber dentin to be washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% EDTA application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. After 15 min, the surface was scrubbed with a cotton pellet and moistened with different dentin cleaning solutions, compounding the following groups: G195% ethanol, G270% ethanol, G370% isopropyl alcohol, or G4eucalyptol. The dentin was scrubbed until the cement residues could not be visually detected. Sections were then processed for SEM and evaluated at x 500 magnification. Scores were attributed to each image according to the area covered by residual sealer, and data were subjected to KruskalWallis at 5% significance. Eucalyptol promoted the most adequate dentin cleaning, although no statistical difference was detected amongst the groups (P > 0.05), except between the eucalyptol and 70% ethanol groups (P < 0.05). All the evaluated dentin cleaning solutions were unable to completely remove the cement residues from the dentin surface. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.

Behavioral Response of the Leafcutter Ant, Atta sexdens rubropilosa (Hymenoptera, Formicidae), to Components of Citrus Pulp

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fruit and seed ontogeny related to the seed behaviour of two tropical species of Caesalpinia (Leguminosae)

Caesalpinia echinata and C ferrea var. ferrea have different seed behaviours and seed and fruit types. Comparison of the seed ontogeny and anatomy partly explained the differences in seed behaviour between these two species of Brazilian legumes; some differences were also related to fruit development. The seed coat in C. ferrea consisted of two layers of osteosclereids, as well as macrosclereids and fibres, to form a typical legume seed coat, whereas C. echinata had only macrosclereids and fibres. In C. echinata, the developing seed coat had paracytic stomata, a feature rarely found in legume seeds. These seed coat features may account for the low longevity of C. echinata seeds. The embryogeny was similar in both species, with no differences in the relationship between embryo growth and seed growth. The seeds of both species behaved as typical endospermic seeds, despite their different morphological classification (exendospermic orthodox seeds were described for C. echinata and endospermic orthodox seeds for C. ferrea). Embryo growth in C. ferrea accelerated when the sclerenchyma of the pericarp was developing, whereas embryonic growth in C. echinata was associated with the conclusion of spine and secretory reservoir development in the pericarp. Other features observed included an endothelial layer that secreted mucilage in both species, a nucellar summit, which grew up into the micropyle, and a placental obturator that connected the ovarian tissue to the ovule in C. ferrea. (C) 2004 the Linnean Society of London.

Ontogenesis of the fruit pulp layer of Hymenaea stigonocarpa (Fabaceae : Caesalpinioideae)

Hymenaea, a genus of major economic importance, has been the subject of several botanical studies. However, there is disagreement over the origin of the edible fruit pulp of Hymenaea, as there are no ontogenetic studies on this organ. According to some authors, the edible layer results from transformations of the mesocarp and endocarp, while according to others, it is considered a seed aril. There are still others who regard this layer as originating from an undefined region of the pericarp. To understand the nature and origin of the pulp layer, Hymenaea stigonocarpa Mart. ex Hayne ovaries and fruit were processed according to standard techniques. The production of the fruit pulp layer starts immediately after anthesis. During anthesis, the inner epidermal cells of the ovary show periclinal division and form a new layer of cells towards the mesocarp; this remains meristematic and initiates cell production by predominantly periclinal divisions, producing a compact tissue towards the locule. This tissue will become the fruit pulp layer, the inner endocarp. The seed coat shows typical testal structure without evidence of aril formation. This allows us to conclude that the fruit pulp layers are exclusively made from part of the endocarp. We also observed resin cavities on outer mesocarp and outer endocarp.

Fungos causadores de podridões pós-colheita em uvas apirênicas no pólo agrícola de Juazeiro - BA e Petrolina - PE

In Brazil, postharvest diseases caused by pathogenic microorganisms are a major problem that causes damage to around 80% of the total fruit production. In the lower middle Sao Francisco river valley numerous studies on identification and control of fungal diseases during postharvest of grapes are needed, in order to minimize losses in this step. In this context, bunches of seedless varieties 'Crimson', 'Sonaka'; 'Superior' and 'Thompson' were collected from July to November 2009, in order to identify and quantify the incidence of pathogenic fungi. The grapes were collected on five farms which specialize in the production of table grapes for export, all located in Juazeiro - BA and Petrolina - PE. During this period, 10 samples were taken. In the fruit farm five plants were used for sampling, and removal of two bunches of grapes per plant, totaling 10 bunches per variety. Subsequently, they were sent to the laboratory of Plant Pathology at UNEB/DTCS where they were placed separately in a moist chamber for 48 hours at an average temperature of 23 degrees C. After this period, isolations of berries and stems in Petri plates containing PDA - potato-dextrose-agar were carried out with 10 repetitions, which were placed on benches under laboratory conditions. From the 8th day on, the presence of Aspergillus niger, Alternaria alternata, Cladosporium herbarum, Lasiodiploidia theobromae was observed, which presented the highest incidence, as well as Rhizopus stolonifer, Penicillium expansum.

Seed with and without Partial Tegument Removal and Substrate Affect Germination of Castanea sativa

Portuguese chestnut (Castanea sativa) is used for forest products, raw nuts and processed flour, paste, and candy. We studied the influence on germination efficiency of seed with and without partial tegument removal combined with different substrate composition (coconut fiber, pine compost and vermiculite) at São Paulo State University, Campus of Botucatu, São Paulo, Brazil. Randomized blocks were used in a factorial scheme 3x2 (three substrates x two seed types) consisting of six treatments with five replications (twelve seeds). Seeds were sowed in expanded polystyrene trays, with 72 cells, and maintained at 25 C under controlled environment. Rate, time elapsed and speed of seed germination was submitted to ANOVA and the average compared using Tukey's 5% test of probability and curves adjusted based on Gompertz regression. Coconut fiber or vermiculite associated with seed without partial tegument removal showed the highest germination rate, and coconut fiber with or without partial tegument removal displayed the fastest speed of seed germination.

Changes in leaf proline and fruit production induced by potassium stress in eggplant

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Attraction of fruit-eating bats with essential oils of fruits: A potential tool for forest restoration

Previous tests with essential oils from ripe chiropterochoric fruits suggested they can be used to attract and capture fruit-eating bats inside forest remnants. Here we evaluated the efficiency of these oils to attract frugivorous bats to open areas. We performed field tests with artificial fruits impregnated with essential oils of the genera Piper or Ficus that were attached to two groups of mist-nets set 50 m outside the border of a forest remnant. One group of artificial fruits received the corresponding oil isolated through hydrodistillation and the other received water only. Fruits with oils attracted significantly more fruit-eating bats, especially Artibeus lituratus that regularly crosses open habitats to reach other forest remnants. The highly significant attraction of A. lituratus by the oil of Piper was unexpected, since this bat is a specialist on Ficus fruits. We hypothesize that in habitats with no fruit available it is possible to attract frugivorous bats with the odor of several ripe fruit species. Furthermore, we verified that almost half of the individuals captured defecated seeds, indicating that the oils also attract recently fed bats, even when their preferred food is available nearby. This technique potentially may increase seed rain at specific locations, being particularly promising to restoration projects.

Seed predation and fruit damage of Solanum lycocarpum (Solanaceae) by rodents in the cerrado of central Brazil

Although neotropical savannas and grasslands, collectively referred to as cerrado, are rich in seed-eating species of rodents, little is known about seed predation and its determinants in this habitat. In this study, we investigated seed predation and damage to fruits of the widespread shrub Solarium lycocarpurn. In addition, the influence of two possible determinants (distance from the parental plant and total crop size) on the feeding behaviour of Oryzorrys scotti (Rodentia, Sigmodontinae) was also examined. O. scotti were captured more frequently close to the shrubs or on shrub crops, indicating that these rodents were attracted to the shrubs and that seed predation was probably distance-dependent. Moreover, the proportion of damaged fruit on the plant decreased as the total crop size increased; consequently, more productive plants were attacked proportionally less by rodents. This pattern of fruit damage may reflect predator satiation caused by the consumption of a large amount of pulp. Alternatively, secondary metabolites in S. lycocarpum fruits may reduce the pulp consumption per feeding event, thereby limiting the number of fruits damaged. (c) 2006 Elsevier Masson SAS. All rights reserved.

Seed dispersal and spatial distribution of Attalea geraensis (Arecaceae) in two remnants of Cerrado in Southeastern Brazil

The seed dispersal system of Attalea geraensis (Arecaceae), an acaulescent palm, was investigated during one year in two Cerrado fragments in the state of São Paulo, southeastern Brazil. A. geraensis had inflorescences and infrutescences throughout the year. Two scatter-hoarding rodents (the spiny rat, Clyomys bishopi and agoutis, Dasyptocta azarae) were identified as seed predators/dispersers, able to move seeds up to 30 in from the palms, although most of the fruits (57.5%) were dispersed less than 2 in. The removal rates were high and after 20 days, 97.2% of the fruits were removed. Fruit fate was not related to fruit mass, length and diameter. The application of Morisita's index showed a more clumped distribution of adults in the smaller fragment, probably because of the absence of agoutis. Higher seed removal by rodents in the large Cerrado remnant may decrease seed predation by beetles. (C) 2007 Elsevier Masson SAS. All rights reserved.

The Effects of Nectar-Robbing on Fruit Production in Sparattosperma leucanthum (Bignoniaceae)

Many animals behave as robbers or thieves of floral resources, causing damage to floral tissues or consuming resources used to attract pollinators, or producing effects similar to emasculation by reducing the pollen load in the anthers (which generally results in losses in terms of sexual reproduction). The present work examined the direct and indirect impacts caused by nectar-robbing on the reproductive success of Sparattosperma leucanthum. Different manipulations of the flowers were tested to determine if fruit production was influenced by the perforations made in the floral tissues (direct damage), and if there were changes in visitation frequencies or in the behaviors of effective pollinators (indirect damage). Perforations made by nectar robbers did not lower the reproductive success of the plant species studied. The bee Trigona spinipes was the most frequent visitor and caused the largest perforations in the calyx and corolla of S. leucanthum. Additionally, we noted the occurrence of pollen theft by this same bee in flowers that had been protected against nectar-robbing. These results suggest that if S. leucanthum had developed a mechanism of resistance to robbery by T spinipes it would probably have experienced even lower pollination levels as a result of reductions in the quantities of pollen available for transfer by effective pollinators. We were not able to evaluate if nectar depletion through robbery modified the behavior of the effective pollinators (bumblebees of the genus Bombus).