Optical sensing of the fatigue damage state of CFRP under realistic aeronautical load sequences

Abstract: We present an optical sensing methodology to estimate the fatigue damage stateof structures made of carbon fiber reinforced polymer (CFRP), by measuring variations on the surface roughness. Variable amplitude loads (VAL), which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF) have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.75 between both variables. The data were compared with a previous study for Constant Amplitude Load (CAL) obtaining similar results. Conclusions suggest that the surface roughness measured in strategic zones is a useful technique for structural health monitoring of CFRP structures, and that it is independent of the type of load applied. Surface roughness can be measured in the field by optical techniques such as speckle, confocal perfilometers and interferometry, among others.

Surface irregularity factor as a parameter to evaluate the fatigue damage state of CFRP

This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials. Constant amplitude fatigue loads (CAL) and realistic variable amplitude loads (VAL), representative of real in- flight conditions, have been applied to “dog bone” shaped tensile specimens. It has been shown that the measurement of the surface irregularity parameters can be applied to evaluate the damage state of a structure, and that it is independent of the type of fatigue load that has caused the damage. As a result, this measurement technique is applicable for a wide range of inspections of composite material structures, from pressurized tanks with constant amplitude loads, to variable amplitude loaded aeronautical structures such as wings and empennages, up to automotive and other industrial applications.

Combining micro and macro data in hedonic price indexes

This paper proposes arithmetic and geometric Paasche quality-adjusted price indexes that combine micro data from the base period with macro data on the averages of asset prices and characteristics at the index period.

Fatigue and Damage Tolerance in Primary Composite Aeronautical Structures

The challenging requirements set on new full composite aeronautical structures are mostly related to the demonstration of damage tolerance capability of their primary structures, required by the airworthiness bodies. And while composite-made structures inherently demonstrate exceptional fatigue properties, when put in real life working conditions, a number of external factors can lead to impact damages thus reducing drastically their fatigue resistance due to fiber delamination, disbonding or breaking. This PhD aims towards contributing to the better understanding of the behavior of the primary composite aeronautical structure after near-edge impacts which are inevitable during the service life of an aircraft. The behavior of CFRP structures after impacts in only one small piece of the big picture which is the certification of CFRP built aircraft, where several other parameters need to be evaluated in order to fulfill the airworthiness requirements. These parameters are also discussed in this PhD thesis in order to give a better understanding of the complex task of CFRP structure certification, in which behavior of the impacted structure plays an important role. An experimental and numerical campaign was carried out in order to determine the level of delamination damage in CFRP specimens after near-edge impacts. By calibrating the numerical model with experimental data, it was possible, for different configurations and energy levels, to predict the extension of a delamination in a CFRP structure and to estimate its residual static strength using a very simple but robust technique. The original contribution of this work to the analysis of CFRP structures is the creation of a model which could be applicable to wide range of thicknesses and stacking sequences of CFRP structures, thus potentially being suitable for industrial application, as well.

Soil enzyme activities and biochemical indexes to assess soil quality in agronomic and forested ecosystems

The soil carries out a wide range of functions and it is important study the effects of land use on soil quality in order to provide most sustainable practices. Three fields trial have been considered to assess soil quality and functionality after human alteration, and to determine the power of soil enzymatic activities, biochemical indexes and mathematical model in the evaluation of soil status. The first field was characterized by conventional and organic management in which were tested also tillage effects. The second was characterized by conventional, organic and agro-ecological management. Finally, the third was a beech forest where was tested the effects of N deposition on soil organic carbon sequestration. Results highlight that both enzyme activities and biochemical indexes could be valid parameters for soil quality evaluation. Conventional management and plowing negatively affected soil quality and functionality with intensive tillage that lead to the downturn of microbial biomass and activity. Both organic and agro-ecological management revealed to be good practices for the maintenance of soil functionality with better microbial activity and metabolic efficiency. This positively affected also soil organic carbon content. At the eutrophic forest, enzyme activities and biochemical indexes positively respond to the treatments but one year of experimentation resulted to be not enough to observe variation in soil organic carbon content. Mathematical models and biochemical indicators resulted to be valid tools for assess soil quality, nonetheless it would be better including the microbial component in the mathematical model and consider more than one index if the aim of the work is to evaluate the overall soil quality and functionality. Concluding, the forest site is the richest one in terms of organic carbon, microbial biomass and activity while, the organic and the agro-ecological management seem to be the more sustainable but without taking in consideration the yield.

Stress Concentration Factor and Fatigue Life Evaluation in offshore tubular KT-Joints

In the last few decades, offshore field has grown fast especially after the notable development of technologies, explorations of oil and gas in deep water and the high concern of offshore companies in renewable energy mainly Wind Energy. Fatigue damage was noticed as one of the main problems causing failure of offshore structures. The purpose of this research is to focus on the evaluation of Stress Concentration Factor and its influence on Fatigue Life for 2 tubular KT-Joints in offshore Jacket structure using different calculation methods. The work is done by using analytical calculations, mainly Efthymiou’s formulations, and numerical solutions, FEM analysis, using ABAQUS software. As for the analytical formulations, the calculations were done according to the geometrical parameters of each method using excel sheets. As for the numerical model, 2 different types of tubular KT-Joints are present where for each model 5 shell element type, 3 solid element type and 3 solid-with-weld element type models were built on ABAQUS. Meshing was assigned according to International Institute of Welding (IIW) recommendations, 5 types of mesh element, to evaluate the Hot-spot stresses. 23 different types of unitary loading conditions were assigned, 9 axial, 7 in-plane bending moment and 7 out-plane bending moment loads. The extraction of Hot-spot stresses and the evaluation of the Stress Concentration Factor were done using PYTHON scripting and MATLAB. Then, the fatigue damage evaluation for a critical KT tubular joint based on Simplified Fatigue Damage Rule and Local Approaches (Strain Damage Parameter and Stress Damage Parameter) methods were calculated according to the maximum Stress Concentration Factor conducted from DNV and FEA methods. In conclusion, this research helped us to compare different results of Stress Concentration Factor and Fatigue Life using different methods and provided us with a general overview about what to study next in the future.

Global Fatigue Assessment of a Decommissioned Jacket Platform for a Sustainable Reuse as an Offshore Wind Turbine

When the offshore oil and gas supplies exhaust, offshore platforms must be decommissioned and removed. The present thesis highlights the importance of evaluating the possibility of reuse of decommissioned offshore jacket platforms for offshore wind energy. In order to shift to the new structure, the topside must be removed from the substructure and a wind turbine can be installed in its place. The feasibility of this project was investigated using a finite element analysis software called Sesam. To study fatigue life in offshore structures, an exhaustive review of the background and state of the art was done. A finite element model was created by the means of Sesam and two different fatigue analysis approaches were applied and compared. In the end, an analysis methodology is suggested for the structural fatigue analysis of offshore wind turbine structures based on international standards, addressing the industry’s need to account for the combined effect of wind and hydrodynamic loads in these type of structures.

Metocean Climate Impact on the Fatigue Assessment of a Jacket-Type Offshore Platform

When the offshore oil and gas supplies exhaust, most offshore platforms are decommissioned and removed. The purpose of this paper is to evaluate the fatigue damage that will occur during the service life of a jacket-type offshore platform using different fatigue approaches in particular locations. The locations considered for this metocean climate impact study were Norway (North Sea), Portugal (Atlantic Ocean - Leixões) and Italy (Adriatic Sea). A finite element model was created by the means of Sesam and two different fatigue analysis, deterministic and spectral, were applied. For the fatigue assessment, an appropriate description of the site-specific wave environment, during the jacket platform service life, must be accomplished. This description is usually provided by a wave scatter diagram. Wave scatter diagrams usually represent the long-term wave environment during a (typical) year and are based on several years of site-specific data to ensure that they adequately represent the wave environment at the location of the structure. In this thesis, the comparison between these fatigue approaches will serve as a pilot study for planned reliability analysis in decommissioned offshore platforms in order to maximize the reuse of these platforms for future wind generation systems.

Analysis and prediction of fretting fatigue life.

Fretting fatigue is a fatigue damage process that occurs when two surfaces in contact with each other are subjected to relative micro-slip, causing a reduced fatigue life with respect to the plain fatigue case. Fretting has been now studied deeply for over 50 years, but still no univocal design approach has been universally accepted. This thesis presents a method for predicting the fretting fatigue life of materials based on the material specific fatigue parameters. To validate the method, a set of fretting fatigue experimental tests have been run, using a newly designed specimen. FE analyses of the tests were also run and the SWT parameter was retrieved and it was found to be useful to successfully identify which samples failed. Finally, S-N curves were retrieved by using two different fatigue life predicting methods (CoffinManson and Jahed-Varvani). The two different methods were compared with the experimental results and it was found that the Jahed-Varvani method gave accurate results in terms of fretting fatigue life.

Fatigue Design Challenges of Transition Pieces from Decommissioned Platforms for Offshore Wind Energy

All structures are subjected to various loading conditions and combinations. For offshore structures, these loads include permanent loads, hydrostatic pressure, wave, current, and wind loads. Typically, sea environments in different geographical regions are characterized by the 100-year wave height, surface currents, and velocity speeds. The main problems associated with the commonly used, deterministic method is the fact that not all waves have the same period, and that the actual stochastic nature of the marine environment is not taken into account. Offshore steel structure fatigue design is done using the DNVGL-RP-0005:2016 standard which takes precedence over the DNV-RP-C203 standard (2012). Fatigue analysis is necessary for oil and gas producing offshore steel structures which were first constructed in the Gulf of Mexico North Sea (the 1930s) and later in the North Sea (1960s). Fatigue strength is commonly described by S-N curves which have been obtained by laboratory experiments. The rapid development of the Offshore wind industry has caused the exploration into deeper ocean areas and the adoption of new support structural concepts such as full lattice tower systems amongst others. The optimal design of offshore wind support structures including foundation, turbine towers, and transition piece components putting into consideration, economy, safety, and even the environment is a critical challenge. In this study, fatigue design challenges of transition pieces from decommissioned platforms for offshore wind energy are proposed to be discussed. The fatigue resistance of the material and structural components under uniaxial and multiaxial loading is introduced with the new fatigue design rules whilst considering the combination of global and local modeling using finite element analysis software programs.

L'efficacia dell'idrokinesiterapia su dolore, fatigue e qualità della vita nei pazienti fibromialgici; una revisione sistematica

La fibromialgia (FMS) è una sindrome reumatica non infiammatoria, caratterizzata da dolore diffuso, presenza di “punti sensibili” alla palpazione (“tender points”, TP), affaticamento, disturbi del sonno e cognitivi, sintomi che comportano aumento del livello di disabilità ed effetti negativi sulla qualità della vita (QoL). L’idrokinesiterapia è l’esercizio aerobico assistito svolto in acqua, preferibilmente riscaldata, che sfrutta le proprietà dell’acqua per il recupero di condizioni patologiche. Indagare l’efficacia dell’idrokinesiterapia (HKT) su dolore, faticabilità e qualità di vita nelle persone affette da sindrome fibromialgica. E' stata condotta una ricerca sulle banche dati di soli studi primari inerenti all’efficacia dell’HKT sulla FMS. Sono stati ricercati studi di alta qualità (con valore ≥ a 6/10 alla PEDro scale) che includessero persone adulte con diagnosi di FMS, che prevedessero l’HKT come trattamento isolato e che misurassero dolore, fatigue e QoL. La qualità metodologica degli studi inclusi all’interno della revisione è stata valutata tramite la scala PEDro. I dati sono stati ricavati attraverso griglia di estrazione ed analizzati qualitativamente. Sono stati inclusi 6 studi che hanno soddisfatto i criteri d'eleggibilità, per un totale di 262 donne. 1 studio ha confrontato HKT con esercizio aerobico a secco 3 volte a settimana per 8 settimane, 1 studio con fisioterapia convenzionale 3 vt/sett per 3 settimane, 1 con HKT in mare 3 vt/sett per 12 settimane, 2 studi con gruppi di controllo 2 e 3 vt/sett per 16 e 32 settimane rispettivamente, 1 con programma educativo 1 vt/sett per 11 settimane. In tutti gli studi il gruppo sperimentale ha mostrato miglioramento degli outcome, ad eccezione dello studio con posologia di una vt/ sett che non ha registrato miglioramenti nei gruppi. Conclusioni: L’idrokinesiterapia può portare ad un miglioramento dei sintomi di dolore, fatica e della qualità della vita delle persone affette da fibromialgia.

The Burden Of Eclampsia: Results From A Multicenter Study On Surveillance Of Severe Maternal Morbidity In Brazil.

Maternal mortality (MM) is a core indicator of disparities in women's rights. The study of Near Miss cases is strategic to identifying the breakdowns in obstetrical care. In absolute numbers, both MM and occurrence of eclampsia are rare events. We aim to assess the obstetric care indicators and main predictors for severe maternal outcome from eclampsia (SMO: maternal death plus maternal near miss). Secondary analysis of a multicenter, cross-sectional study, including 27 centers from all geographic regions of Brazil, from 2009 to 2010. 426 cases of eclampsia were identified and classified according to the outcomes: SMO and non-SMO. We classified facilities as coming from low- and high-income regions and calculated the WHO's obstetric health indicators. SPSS and Stata softwares were used to calculate the prevalence ratios (PR) and respective 95% confidence interval (CI) to assess maternal characteristics, clinical and obstetrical history, and access to health services as predictors for SMO, subsequently correlating them with the corresponding perinatal outcomes, also applying multiple regression analysis (adjusted for cluster effect). Prevalence of and mortality indexes for eclampsia in higher and lower income regions were 0.2%/0.8% and 8.1%/22%, respectively. Difficulties in access to health care showed that ICU admission (adjPR 3.61; 95% CI 1.77-7.35) and inadequate monitoring (adjPR 2.31; 95% CI 1.48-3.59) were associated with SMO. Morbidity and mortality associated with eclampsia were high in Brazil, especially in lower income regions. Promoting quality maternal health care and improving the availability of obstetric emergency care are essential actions to relieve the burden of eclampsia.

[climacteric Syndrome In A Northeastern Brazilian City: A Household Survey].

To assess the prevalence of Climacteric Syndrome (CS) in women from a municipality of Northeastern Brazil which is less developed socioeconomically. A prospective household survey was performed in São Luís, Maranhão, Brazil with 1,210 climacteric women aged 45 to 60 years. Interviews were applied using previously tested standard questionnaires from April to July 2008. The severity of climacteric symptoms was analyzed by circulatory and psychological indexes and the latter were associated with menopausal status. Multiple correspondence analysis was used to assess the relation among climacteric symptoms. Most patients were 55 to 60 years old (35.3%), mulatto (37.9%), with 9-11 years of schooling (39.8%), with a partner (56%), Catholic (73.9%) and belonged to the socioeconomic class C (51.1%). The prevalence of CS was 85.9%, and hot flashes (56.4%) and sweating (50.4%) were the most prevalent symptoms. The most frequent psychological symptoms were nervousness (45%) and emotional liability (44.8%). The severity of vasomotor and psychological symptoms was significantly higher during the peri and postmenopausal period (p<0.05). Vaginal dryness (62.7%) was the most prevalent urogenital complaint. The prevalence of CS was high among women from São Luís, Maranhão, Brazil.

[factors Associated With Satisfaction With Life Among Elderly Caregivers And Non-caregivers].

This article seeks to investigate associations between satisfaction with life and sociodemographic variables, health conditions, functionality, social involvement and social support among elderly caregivers and non-caregivers, as well as between satisfaction and the intensity of stress in the caregiver group. A sample of 338 caregivers was selected according to two items of the Brazilian version of the Elders Life Stress Inventory. A comparison-group of elderly non-caregivers was selected at random, with a similar gender, age and income profile. Data were derived from self-reported questionnaires and scales. Elderly caregivers with low levels of satisfaction and high levels of stress revealed more symptoms of insomnia, fatigue, diseases and worse IADL performance. Those with greater satisfaction and less stress revealed a good level of social support. Insomnia, depression and fatigue were associated with low satisfaction among caregivers, and with fatigue, depression and low social support among non-caregivers. It was considered relevant that instrumental, psychological and informative support can improve the quality of life and the quality of care provided by elderly caregivers, especially if they are affected by unfavorable health and psychosocial conditions and low satisfaction with life.

Understanding Red Blood Cell Parameters In The Context Of The Frailty Phenotype: Interpretations Of The Fibra (frailty In Brazilian Seniors) Study.

Frailty and anemia in the elderly appear to share a common pathophysiology associated with chronic inflammatory processes. This study uses an analytical, cross-sectional, population-based methodology to investigate the probable relationships between frailty, red blood cell parameters and inflammatory markers in 255 community-dwelling elders aged 65 years or older. The frailty phenotype was assessed by non-intentional weight loss, fatigue, low grip strength, low energy expenditure and reduced gait speed. Blood sample analyses were performed to determine hemoglobin level, hematocrit and reticulocyte count, as well as the inflammatory variables IL-6, IL-1ra and hsCRP. In the first multivariate analysis (model I), considering only the erythroid parameters, Hb concentration was a significant variable for both general frailty status and weight loss: a 1.0g/dL drop in serum Hb concentration represented a 2.02-fold increase (CI 1.12-3.63) in an individual's chance of being frail. In the second analysis (model II), which also included inflammatory cytokine levels, hsCRP was independently selected as a significant variable. Each additional year of age represented a 1.21-fold increase in the chance of being frail, and each 1-unit increase in serum hsCRP represented a 3.64-fold increase in the chance of having the frailty phenotype. In model II reticulocyte counts were associated with weight loss and reduced metabolic expenditure criteria. Our findings suggest that reduced Hb concentration, reduced RetAbs count and elevated serum hsCRP levels should be considered components of frailty, which in turn is correlated with sarcopenia, as evidenced by weight loss.