847 resultados para Estação de tratamento - avaliação de desempenho
Resumo:
O vídeo foi elaborado em São Carlos, com apoio da Estação de Tratamento de Água do município.
Resumo:
Parte 3 de um total de 3 videoaulas. Os materiais devem ser assistidos em sequência.
Resumo:
O material apresenta os principais elementos - conceitos teóricos, fórmulas e procedimentos - para dimensionar as grades na entrada de uma Estação de Tratamento de Esgoto (ETE) e a caixa de areia. (desarenador), considerando as recomendações exigidas pela norma.
Resumo:
O presente trabalho descreve duas técnicas de deteção de gás baseadas em fibra ótica e apresenta dois sistemas sensores testados em ambiente laboratorial, usando técnicas de processamento de sinal usualmente associadas à espetroscopia de absorção. O estudo inicial do estado da arte dos sensores baseados em fibra ótica para a deteção de gases apresenta soluções com elevada seletividade, sensibilidade e resolução que permitem tempos de resposta curtos e esquemas de multiplexagem versáteis. A técnica de espetroscopia de absorção direta (DAS) permite a deteção de gases de forma simples e com alguma eficácia, mas com uma baixa relação-sinal-ruido. A espetroscopia por modulação de comprimento de onda (WMS) é uma técnica muito eficaz e de elevada sensibilidade para a deteção de gases, dado que a deteção é deslocada para frequências afastadas do ruído base, melhorando significativamente a relação-sinal-ruído. Estas técnicas foram escolhidas para a implementação de dois sistemas optoeletrónicos, totalmente controlados pelas respetivas aplicações em LabVIEW para a deteção e monitorização de amónia (NH3), dióxido de carbono (CO2) e metano (CH4). O trabalho é finalizado com a caraterização laboratorial dos sistemas e avaliação do desempenho, permitindo a otimização dos sistemas e técnicas implementados. De referir que o trabalho realizado nas instalações da Unidade de Optoeletrónica e Sistemas Eletrónicos (UOSE) do Instituto de Engenharia de Sistemas e Computadores (INESC), Tecnologia e Ciência (TEC), laboratório associado coordenado pelo INESC Porto, permitiu, excelentes condições de trabalho, essenciais para implementar de forma prática os diversos conceitos estudados, bem como testar e caraterizar todos os sistemas desenvolvidos em ambiente laboratorial. O trabalho desenvolvido enquadra-se no âmbito do projeto europeu ECOAL-MGT (Gestão ecológica de pilhas de resíduos de carvão), que será implementado para monitorização remota de parâmetros fundamentais de uma escombreira de carvão em auto-combustão em S.ºPedro da Cova, Portugal.
Resumo:
This research examined the personnel policies of the Federal University of Pará (UFPA), aimed at the middle area, implemented by the President's Office of Personnel Management (PROGEP), through the Performance Management and Development from 2006 to 2009 period, in which Institutional Plan was implemented for Technical and administrative (PIDT) with a view to ascertaining whether these actions were developed in line with the ideas of managerialism or New Public Management (NPM). The study opted for qualitative research using interview as a tool to collect data. The informants were managers PROGEP / UFPA who acted in that period. Data interpretation was based on analysis of content from the collation of speeches and documents produced during the period with the managerial categories. Data analysis revealed that the management of people, UFPA has the characteristics of a hybrid management, observing the period studied two models of management: a bureaucratic, rational, focused on processes, contemporary face of public organizations, and other managerialist, adopted by PROGEP in obedience to the mandatory policies of the federal government, being much more present the characteristics of a personnel policy-oriented processes. Concludes that the personnel policy of the UFPA has not been fully tuned to managerialism in the surveyed period
Resumo:
The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed
Resumo:
The current study examined spatial-temporal modifications and water quality through chemical and biotic indicators during both dry (January, February and November 2006) and wet seasons (March to June 2006). This study was carried out in Armando Ribeiro Gonçalves Reservoir, RN, Canal do Pataxó and after the water station treatment (WST). The physical-chemical parameters were measured in situ and inorganic nutrients, chlorophyll a and Free Oxygen Demand (FOD) were analyzed in laboratory conditions. Quali quantitative analyses of phytoplankton were carried out utilizing Sedgwick-Rafter camera. Results indicate that DQO concentrations were low. FOD concentrations in the reservoir were comparatively higher in the dry season (5.21 mgL-1; 5.64 mgL-1 e 6.05 mgL-1) in relation to the wet season (4.52 mgL-1; 4.12 mgL-1 e 4.92 mgL-1), in surface, intermediate and bottom waters, respectively. FOD values were inferior to 1.0mgL-1in both Canal do Pataxó and after WST, which is considered adequate for public use reservoirs. Although FOD concentrations were low, Armando Ribeiro Gonçalves Reservoir, Canal do Pataxó and WST were classified as euthophizied, mesotrophic ad oligotrophic, respectively, considering the Index of Trophic State Criteria. Chlorophyll a concentrations in the study reservoir were higher in the surface (199.2 µgL-1) during the wet season, whereas in Canal do Pataxó concentrations decreased from 1.56 µgL-1 to 0.028 µgL-1, and after WST values were low (0.059 µgL-1). Dominance of cianobacterias, such as Planktotrhix agardhii (dry season) and Microcystis sp (wet season) was registered in all three areas. In the reservoir and Canal do Pataxó, density of cianobacterias, such as P. agardhii and Microcistys sp., was superior to the values allowed by the Health ministry (HM). However, after WST, density values of cianobacteria were inferior to values established by the HM
Resumo:
The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible
Resumo:
The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms
Resumo:
Determinou-se, em eqüinos, o efeito do treinamento sobre as concentrações sangüíneas de lactato e plasmáticas de glicose durante exercício de intensidade progressiva em esteira rolante. Demonstrou-se que o treinamento aeróbico causou diminuição da concentração máxima de lactato e que o limiar de lactato corresponde ao ponto de inflexão da curva de glicose plasmática, confirmando esse parâmetro como indicador da capacidade aeróbica de cavalos.
Resumo:
The research aimed identify how the quality of services provided by Casa de Apoio à Criança com Câncer Durval Paiva is perceived by its users, giving an opportunity of improve their performance in social services provision pointing out the failures experienced, the institution will have the user as a important partner in fails identification, serving as a subsidy to the actions of correction and improvement to such situations demands. With this work implementation will be observed contributions that will permeate to the fields of theory and practice, enabling progress and enrichment on the subject. The theoretical contribution is observed as this work execution will provide greater advance about the models developed for the third sector. The proposed work will raise awareness issues about the full potential of the social economy, with regard to the quality of services provided by organizations, allowing a better definition of priorities on their development. The study addressed three issues: identifying the people that receive support of the Casa Durval Paiva, identifying what is the level of satisfaction of families served and evaluate the services provided by Casa Durval Paiva that demand improvements in the perception of families assisted. Found a demand for services has been found that the institution has a multidisciplinary team with a high level of professionalism, and supervised with students of various educational institutions and many volunteers to complement the actions of individual professionals. Was measured a high satisfaction of users of the services provided by Casa Durval Paiva
Resumo:
This paper presents an analysis of the current strategic plan of the Judiciary of Rio Grande do Norte emphasizing the evaluation of strategic indicators verifying the effectiveness in implementation, since the implementation of the Balanced Scorecard as a tool for performance evaluation of strategic management. The research presents the strategy map and the evaluation indices of strategic performance reporting on the effectiveness. After literature review and documentary, is making the measurement of indicators that are treated from the standpoint of an exploratory and descriptive in strategic planning used by the judiciary Potiguar. The problem was evaluated qualitatively and quantitatively using statistical techniques for data analysis comparing them between Judiciaries of Brazilian States. With respect to data collection was used performance indicators extracted from the data of Justice in Numbers provided by CNJ the period from 2004 to 2011, and the information sought in the Sector Strategic Planning TJ / RN. The main results of this study are as follows: Acquisition of insight into what level is the strategic planning of the judiciary of Rio Grande do Norte and the evolution of its performance indicators comparing them with the states of RS, CE, SE and the National Judiciary
Resumo:
This work presents a proposal for a voltage and frequency control system for a wind power induction generator. It has been developed na experimental structure composes basically by a three phase induction machine, a three phase capacitor and a reactive static Power compensator controlled by histeresys. lt has been developed control algorithms using conventional methods (Pl control) and linguistic methods (using concepts of logic and fuzzy control), to compare their performances in the variable speed generator system. The control loop was projected using the ADJDA PCL 818 model board into a Pentium 200 MHz compu ter. The induction generator mathematical model was studied throught Park transformation. It has been realized simulations in the Pspice@ software, to verify the system characteristics in transient and steady-state situations. The real time control program was developed in C language, possibilish verify the algorithm performance in the 2,2kW didatic experimental system
Resumo:
Um equipamento denominado Unidade Móvel de Ensaio da Barra de Tração - UMEB, foi desenvolvido na FCA/UNESP de Botucatu para realizar ensaios de tratores em solo agrícola. Construída a partir de um reboque (trailer), a UMEB foi adaptada para servir como carro dinamométrico instrumentado, utilizado na avaliação do desempenho de tratores submetidos a ensaios na barra de tração. Sua massa total é de 10.500 kg sustentados por um conjunto de seis rodados pneumáticos. Ensaios de campo mostraram que a UMEB proporcionou força de tração acima de 35 kN, mantendo-a constante, em diferentes condições de superfície do solo, mesmo quando a velocidade de deslocamento foi modificada.