Periodic inspection of sprayers: diagnostic to the northern of Paraná

Para a otimização no uso de agroquímicos, vários países têm realizado inspeções periódicas em pulverizadores agrícolas. No Brasil, o conhecimento do estado destas máquinas pode nortear pesquisas e investimentos em orientação de uso e de manutenção das mesmas. O objetivo deste trabalho foi verificar o estado de manutenção de pulverizadores em uso para a região norte do Estado do Paraná. Foram avaliados itens como: presença, estado e escala do manômetro, estado das mangueiras, estado dos antigotejadores, presença de vazamentos, estado da barra, estado dos filtros, estado das pontas de pulverização e erros na taxa de aplicação. As máquinas foram caracterizadas como aprovadas quando não havia falha em nenhum item avaliado. O fator que ocasionou o maior índice de reprova entre as máquinas foi a escala incorreta do manômetro, que reprovou 84,55% das máquinas avaliadas. Outro fator de destaque foi a taxa de aplicação incorreta em 75,5% das máquinas. do total dos 110 pulverizadores avaliados,apenas uma unidade foi aprovada.

Desacoplamento de um gerador síncrono através de um controle adaptativo por modelo de referência baseado em funções de Base radial

An alternative nonlinear technique for decoupling and control is presented. This technique is based on a RBF (Radial Basis Functions) neural network and it is applied to the synchronous generator model. The synchronous generator is a coupled system, in other words, a change at one input variable of the system, changes more than one output. The RBF network will perform the decoupling, separating the control of the following outputs variables: the load angle and flux linkage in the field winding. This technique does not require knowledge of the system parameters and, due the nature of radial basis functions, it shows itself stable to parametric uncertainties, disturbances and simpler when it is applied in control. The RBF decoupler is designed in this work for decouple a nonlinear MIMO system with two inputs and two outputs. The weights between hidden and output layer are modified online, using an adaptive law in real time. The adaptive law is developed by Lyapunov s Method. A decoupling adaptive controller uses the errors between system outputs and model outputs, and filtered outputs of the system to produce control signals. The RBF network forces each outputs of generator to behave like reference model. When the RBF approaches adequately control signals, the system decoupling is achieved. A mathematical proof and analysis are showed. Simulations are presented to show the performance and robustness of the RBF network

Localização de um robô móvel usando odometria e marcos naturais

Several methods of mobile robot navigation request the mensuration of robot position and orientation in its workspace. In the wheeled mobile robot case, techniques based on odometry allow to determine the robot localization by the integration of incremental displacements of its wheels. However, this technique is subject to errors that accumulate with the distance traveled by the robot, making unfeasible its exclusive use. Other methods are based on the detection of natural or artificial landmarks present in the environment and whose location is known. This technique doesnt generate cumulative errors, but it can request a larger processing time than the methods based on odometry. Thus, many methods make use of both techniques, in such a way that the odometry errors are periodically corrected through mensurations obtained from landmarks. Accordding to this approach, this work proposes a hybrid localization system for wheeled mobile robots in indoor environments based on odometry and natural landmarks. The landmarks are straight lines de.ned by the junctions in environments floor, forming a bi-dimensional grid. The landmark detection from digital images is perfomed through the Hough transform. Heuristics are associated with that transform to allow its application in real time. To reduce the search time of landmarks, we propose to map odometry errors in an area of the captured image that possesses high probability of containing the sought mark

Adaptação de um sistema automatizado para medição de microdureza

The hardness test is thoroughly used in research and evaluation of materials for quality control. However, this test results are subject to uncertainties caused by the process operator in the moment of the mensuration impression diagonals make by the indenter in the sample. With this mind, an automated equipment of hardness mensuration was developed. The hardness value was obtained starting from the mensuration of plastic deformation suffered by the material to a well-known load. The material deformation was calculated through the mensuration of the difference between the progress and retreat of a diamond indenter on the used sample. It was not necessary, therefore, the manual mensuration of the diagonals, decreasing the mistake source caused by the operator. Tension graphs of versus deformation could be analyzed from data obtained by the accomplished analysis, as well as you became possible a complete observation of the whole process. Following, the hardness results calculated by the experimental apparatus were compared with the results calculated by a commercial microhardness machine with the intention of testing its efficiency. All things considered, it became possible the materials hardness mensuration through an automated method, which minimized the mistakes caused by the operator and increased the analysis reliability

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Medição e modelagem da resposta de um sensor de pig perfilométrico sob diferentes solicitações dinâmicas

Ensure the integrity of the pipeline network is an extremely important factor in the oil and gas industry. The engineering of pipelines uses sophisticated robotic inspection tools in-line known as instrumented pigs. Several relevant factors difficult the inspection of pipelines, especially in offshore field which uses pipelines with multi-diameters, radii of curvature accentuated, wall thickness of the pipe above the conventional, multi-phase flow and so on. Within this context, appeared a new instrumented Pig, called Feeler PIG, for detection and sizing of thickness loss in pipelines with internal damage. This tool was developed to overcome several limitations that other conventional instrumented pigs have during the inspection. Several factors influence the measurement errors of the pig affecting the reliability of the results. This work shows different operating conditions and provides a test rig for feeler sensors of an inspection pig under different dynamic loads. The results of measurements of the damage type of shoulder and holes in a cyclic flat surface are evaluated, as well as a mathematical model for the sensor response and their errors from the actual behavior

Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Uma proposta de ensino para o nível fundamental a partir das concepções sobre insetos

O presente trabalho consiste em uma investigação acerca das concepções de estudantes sobre o que é um inseto. Partiu-se do pressuposto de que os alunos expressam concepções errôneas no momento de identificar os representantes do táxon Insecta e que isso é consequência das experiências do cotidiano e de erros conceituais oriundos da formação escolar incorreta. Os objetivos deste trabalho foram investigar sobre concepções alternativas acerca dos insetos com alunos do ensino fundamental II e propor situações para promoção de uma aprendizagem mais ativa. Os dados para analise foram coletados em três turmas de escolas diferentes: uma escola em Nova Parnamirim, da rede privada, e duas da rede pública municipal de ensino: uma do município de Natal/RN e a outra do município de Parnamirim/RN. Utilizou-se como instrumento um questionário aplicado em duas fases. Na primeira etapa foram feitas três questões abertas e duas fechadas. Na segunda, aplicaram-se mais três questões. Nesta oportunidade foram apresentados aos alunos uma lista com imagens de insetos e animais considerados não insetos. Os resultados dos questionários mostraram que os alunos apresentaram na sua maioria, 62%, sentimentos negativos sobre os insetos, expressos por palavras depreciativas, entre elas: nojentos, feios, asquerosos, perigosos, sendo estes mais da metade dos alunos da amostra. Sentimentos positivos representaram 20%: fazem bem ao homem, Deus criou, são bons, são bonitos, e 18% apresentaram neutralidade nessas categorias. Outro resultado apresentado foi que 82% generalizaram os animais artrópodes como sendo insetos. Como forma de resolver problemas relacionados as concepções uma unidade didática foi aplicada em uma das escolas envolvidas na pesquisa, validando assim um instrumento pedagógico que incluiu atividade lúdica constituída de um jogo de tabuleiro proporcionador de uma vivência de aprendizagem focada em conceitos científicos sobre os insetos fáceis de serem apreendidos

Citologia: uma proposta formativa na EaD - UFRN a partir de concepções alternativas

Learning difficulties can have a direct influence on the teaching-learning process of students by reducing their school performance. One factor that may contribute to this negative influence on learning refers to the presence of alternative conceptions, which may have different origins in the educational process. It is of paramount importance, for teachers, for example, to identify the concepts and the difficulties of their students in order for that knowledge can be able to contribute significantly to improve the teaching and learning process. From the following considerations, the present study (still in progress) aims to investigate aspects related to the concepts and difficulties of graduating students in relation to the contents of Biology. The participants of the research were undergraduate students in Biological Sciences from UFRN, studying by Distance Learning (Educação a Distância). To develop the survey, questionnaires were developed to identify the contents in Biology that these students have more difficulties as well as an interview to raise misconceptions regarding the content of cytology. Another tool developed was a textbook evaluation form, which was applied in conjunction with a questionnaire in workshops (short courses) in order to identify possible errors and mistakes that could jeopardize the process of teaching and learning, such as the importance that these learners assign to textbooks in the educational process. From the data collected, a booklet on the content of cytology was developed as a product. It is expected that it can be applied in classrooms in order to improve the teaching and learning in references to Biology, to minimize, for example, alternative conceptions than can occur related to the theme

Dificuldades de aprendizagem sobre conceitos de genética no ensino fundamental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Dificuldades na construção de gráficos de funções

This study describes about graduation s students difficulties of to draw functions graph. Specifically, we intend to observe their abilities evolution, as well as their difficulties during Calculus I subject in engineering course. For that, we show them publications about the elaboration of graphs and its difficulties in obstacle terms and some researches witch contain this subject and that it was done during postgraduate studies in mathematical education. It shows by research methodology aspects related to French didatic s mathematic and some theories of cognitive psychology considering the high value between theoretical-methodological relation that was evidenced in both theoretical conceptions about ways to understand and teach mathematic. This methodology is based on didactic engineering purpose, that consist in preliminaries analysis, conception and didactic sequence analysis prior, trials by application followed analysis up and conclusion. We had also used pedagogicals actions and analysis of results achieved, to classify types of errors made by the 2005 s students during second semester, from conceptions related to the episthemologic and didactics obstacles

Refletindo dificuldades de aprendizagem de alunos do ensino médio no estudo do equilíbrio químico

This research intends to identify the main conceptual mistakes committed by High School students when studying Chemical Equilibrium and also how the didactic books can influence in their formation. For the data - collecting we applied 150 questionnaires with 11 open questions e 4 restricted ones. Students from three different private schools in Natal-RN were used in this survey. The questionary about the book analysis tried to understand how the subject has been boarded, making it easier or not for the knowledge building. The books were chosen by being usually the most used ones at the chemistry classes in the schools in town. On the didactic book analysis we evaluated 12 items that tried to identify the clarity with which the books would bring up the subjects, the contextualization of the exercises, the analogies used, the amount and the quality of exercises, the connections between the subjects, and the retaken of important concepts. The questionary given to the students tried to get their knowledge about the concepts related to Chemical Equilibrium. The main mistakes found were: the definition of the state of equilibrium in a chemical reaction, the constant, the double headed arrow, confusions between mass and concentration, the representation of a microscopic reaction in equilibrium, partial pressure and total pressure, and the function of the catalyser. The results demonstrated a lot of insecurity or lack of knowledge about the subject when it was realized that there was a big number of blank questions and a considerable percentage of questions with conceptual errors. We concluded that those errors could be eased or even avoided if the didactic books and the teachers boarded the contents in a more conceptual form with the application of a largest number of good quality exercices, watching the building of definitions by the students, avoiding this way the formation of wrong concepts

Registro semiautomático entre imagens infravermelhas e RGB coletadas por um par de câmaras digitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Integridade no posicionamento RTK e RTK em rede

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)