Electrical Students at Work

A class full of students learning electric are shown in an electrical classroom at the New York Trade School. In the upper left-hand corner of the room a sign reminding the students to think about safety can be seen. It reads, "Beware of Live Wires: Students are warned not to make, or disconnect hookups, without first opening the switch that controls the flow of current. Observe Safety First at All Times." Black and white photograph.

Students at Work in Electrical Classroom

A class of electrical students at the New York Trade School work as a professor observes from the front of the room. Notice the sign in the background, "Connect Them Right and They Always Work." Black and white photograph.

Class of Electrical Students at the New York Trade School

A class of electrical students at the New York Trade School are pictured at workbenches. Black and white photograph.

Electrical Wiring Shop at the New York Trade School

The electrical wiring shop at the New York Trade School is shown with students working. In the background, the planning area with draft tables can also be seen. Black and white photograph.

Electrical Classroom at the New York Trade School

An electrical classroom at the New York Trade School is shown here absent of any students. Black and white photograph that is yellowing and is torn in the upper left-hand corner.

Electrical Lecture

Students fill a lecture room at the New York Trade School. The illustration on the board indicates that this is probably a lecture in the Electrical Department. Black and white photograph.

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.

Acupuncture with manual and electrical stimulation for labour pain : a longitudinal randomised controlled trial

Background: Acupuncture is commonly used to reduce pain during labour despite contradictory results. The aim of this study is to evaluate the effectiveness of acupuncture with manual stimulation and acupuncture with combined manual and electrical stimulation (electro-acupuncture) compared with standard care in reducing labour pain. Our hypothesis was that both acupuncture stimulation techniques were more effective than standard care, and that electro-acupuncture was most effective.  Methods: A longitudinal randomised controlled trial. The recruitment of participants took place at the admission to the labour ward between November 2008 and October 2011 at two Swedish hospitals. 303 nulliparous women with normal pregnancies were randomised to: 40 minutes of manual acupuncture (MA), electro-acupuncture (EA), or standard care without acupuncture (SC). Primary outcome: labour pain, assessed by Visual Analogue Scale (VAS). Secondary outcomes: relaxation, use of obstetric pain relief during labour and post-partum assessments of labour pain. The sample size calculation was based on the primary outcome and a difference of 15 mm on VAS was regarded as clinically relevant, this gave 101 in each group, including a total of 303 women.  Results: Mean estimated pain scores on VAS (SC: 69.0, MA: 66.4 and EA: 68.5), adjusted for: treatment, age, education, and time from baseline, with no interactions did not differ between the groups (SC vs MA: mean difference 2.6, 95% confidence interval [CI] -1.7-6.9 and SC vs EA: mean difference 0.6 [95% CI] -3.6-4.8). Fewer number of women in the EA group used epidural analgesia (46%) than women in the MA group (61%) and SC group (70%) (EA vs SC: odds ratio [OR] 0.35; [95% CI] 0.19-0.67).  Conclusions: Acupuncture does not reduce women's experience of labour pain, neither with manual stimulation nor with combined manual and electrical stimulation. However, fewer women in the EA group used epidural analgesia thus indicating that the effect of acupuncture with electrical stimulation may be underestimated. These findings were obtained in a context with free access to other forms of pain relief.

Acupuncture with manual and electrical stimulation for labour pain : a two month follow up of recollection of pain and birth experience.

BACKGROUND: In a previous randomised controlled trial we showed that acupuncture with a combination of manual- and electrical stimulation (EA) did not affect the level of pain, as compared with acupuncture with manual stimulation (MA) and standard care (SC), but reduced the need for other forms of pain relief, including epidural analgesia. To dismiss an under-treatment of pain in the trial, we did a long-term follow up on the recollection of labour pain and the birth experience comparing acupuncture with manual stimulation, acupuncture with combined electrical and manual stimulation with standard care. Our hypothesis was that despite the lower frequency of use of other pain relief, women who had received EA would make similar retrospective assessments of labour pain and the birth experience 2 months after birth as women who received standard care (SC) or acupuncture with manual stimulation (MA). METHODS: Secondary analyses of data collected for a randomised controlled trial conducted at two delivery wards in Sweden. A total of 303 nulliparous women with normal pregnancies were randomised to: 40 min of MA or EA, or SC without acupuncture. Questionnaires were administered the day after partus and 2 months later. RESULTS: Two months postpartum, the mean recalled pain on the visual analogue scale (SC: 70.1, MA: 69.3 and EA: 68.7) did not differ between the groups (SC vs MA: adjusted mean difference 0.8, 95 % confidence interval [CI] -6.3 to 7.9 and SC vs EA: mean difference 1.3 CI 95 % -5.5 to 8.1). Positive birth experience (SC: 54.3 %, MA: 64.6 % and EA: 61.0 %) did not differ between the groups (SC vs MA: adjusted Odds Ratio [OR] 1.8, CI 95 % 0.9 to 3.7 and SC vs EA: OR 1.4 CI 95 % 0.7 to 2.6). CONCLUSIONS: Despite the lower use of other pain relief, women who received acupuncture with the combination of manual and electrical stimulation during labour made the same retrospective assessments of labour pain and birth experience 2 months postpartum as those who received acupuncture with manual stimulation or standard care. TRIAL REGISTRATION: ClinicalTrials.gov: NCT01197950.

Electrical Hookups and Service Providers in Maine

http://digitalcommons.colby.edu/atlasofmaine2008/1008/thumbnail.jpg

Market coupling in the power markets

The thesis analyses the European Unions’ effort to create an integrated pan-European electricity market based on “market coupling” as the proposed allocation mechanism for interconnector transfer capacity. Thus, the thesis’ main focus is if market coupling leads to a price convergence in interlinked markets and how it affects the behavior of electricity price data. The applied research methods are a qualitative, structured literature review and a quantitative analysis of electricity price data. The quantitative analysis relies on descriptive statistics of absolute price differentials and on a Cointegration analysis according to Engle & Granger (1987)’s two step approach. Main findings are that implicit auction mechanisms such as market coupling are more efficient than explicit auctions. Especially the method of price coupling leads to a price convergence in involved markets, to social welfare gains and reduces market power of producers, as shown on the example of the TLC market coupling. The market coupling initiative between Germany and Denmark, on the other hand, is evaluated as less successful and illustrates the complexity and difficulties of implementing market coupling initiatives. The cointegration analysis shows that the time series were already before the coupling date cointegrated, but the statistical significance increased. The thesis suggests that market coupling leads to a price convergence of involved markets and thus functions as method to create a single, integrated European electricity market.

Market coupling in the power markets

A dissertação analisa o esforço dos sindicatos europeus para criar um mercado pan- europeu de electricidade integrada baseada em "mercados combinados", como o mecanismo de alocação de capacidade de transferência de energia entre diferentes sistemas. Assim, o foco principal do estudo é se a integração do mercado leva a uma convergência de preços nos mercados interligados, e como isso afeta o comportamento dos preços de energia elétrica. Os métodos de investigação são uma revisão bibliográfica estruturada qualitativa e uma análise quantitativa de dados de preços de energia elétrica. A análise quantitativa se baseia em estatísticas descritivas das diferenças de preços absolutos e em uma análise de cointegração de acordo com a abordagem de Engle e Granger (1987). As principais conclusões são que os mecanismos de leilões implícitos, tais como a integração de mercado são mais eficientes que os leilões explícitos. Especialmente, o método de acoplamento de preços leva a uma convergência de preços nos mercados envolvidos, a ganhos de bem-estar social e reduz a o poder dos produtores no mercado, como mostra o exemplo da integração mercado TLC. A iniciativa mercados combinados entre a Alemanha ea Dinamarca, por outro lado, é avaliada como de menor sucesso e ilustra a complexidade e as dificuldades de implementação de iniciativas de integração de mercado. A análise de cointegração mostra que as séries temporais já estavam cointegradas antes da data de integração, mas a significância estatística aumentou. A tese sugere que a integração do mercado leva a uma convergência dos preços dos mercados envolvidos e, portanto, funciona como método para criar um mercado de eletricidade único e integrado na Europa.