The electric field of a weakly electric fish

Freshwater fish of the genus Apteronotus (family Gymnotidae) generate a weak, high frequency electric field (< 100 mV/cm, 0.5-10 kHz) which permeates their local environment. These nocturnal fish are acutely sensitive to perturbations in their electric field caused by other electric fish, and nearby objects whose impedance is different from the surrounding water. This thesis presents high temporal and spatial resolution maps of the electric potential and field on and near Apteronotus. The fish's electric field is a complicated and highly stable function of space and time. Its characteristics, such as spectral composition, timing, and rate of attenuation, are examined in terms of physical constraints, and their possible functional roles in electroreception.

Temporal jitter of the periodic field is less than 1 µsec. However, electrocyte activity is not globally synchronous along the fish 's electric organ. The propagation of electrocyte activation down the fish's body produces a rotation of the electric field vector in the caudal part of the fish. This may assist the fish in identifying nonsymmetrical objects, and could also confuse electrosensory predators that try to locate Apteronotus by following its fieldlines. The propagation also results in a complex spatiotemporal pattern of the EOD potential near the fish. Visualizing the potential on the same and different fish over timescales of several months suggests that it is stable and could serve as a unique signature for individual fish.

Measurements of the electric field were used to calculate the effects of simple objects on the fish's electric field. The shape of the perturbation or "electric image" on the fish's skin is relatively independent of a simple object's size, conductivity, and rostrocaudal location, and therefore could unambiguously determine object distance. The range of electrolocation may depend on both the size of objects and their rostrocaudal location. Only objects with very large dielectric constants cause appreciable phase shifts, and these are strongly dependent on the water conductivity.

Design, specification, and synthesis of aircraft electric power systems control logic

Cyber-physical systems integrate computation, networking, and physical processes. Substantial research challenges exist in the design and verification of such large-scale, distributed sensing, ac- tuation, and control systems. Rapidly improving technology and recent advances in control theory, networked systems, and computer science give us the opportunity to drastically improve our approach to integrated flow of information and cooperative behavior. Current systems rely on text-based spec- ifications and manual design. Using new technology advances, we can create easier, more efficient, and cheaper ways of developing these control systems. This thesis will focus on design considera- tions for system topologies, ways to formally and automatically specify requirements, and methods to synthesize reactive control protocols, all within the context of an aircraft electric power system as a representative application area.

This thesis consists of three complementary parts: synthesis, specification, and design. The first section focuses on the synthesis of central and distributed reactive controllers for an aircraft elec- tric power system. This approach incorporates methodologies from computer science and control. The resulting controllers are correct by construction with respect to system requirements, which are formulated using the specification language of linear temporal logic (LTL). The second section addresses how to formally specify requirements and introduces a domain-specific language for electric power systems. A software tool automatically converts high-level requirements into LTL and synthesizes a controller.

The final sections focus on design space exploration. A design methodology is proposed that uses mixed-integer linear programming to obtain candidate topologies, which are then used to synthesize controllers. The discrete-time control logic is then verified in real-time by two methods: hardware and simulation. Finally, the problem of partial observability and dynamic state estimation is ex- plored. Given a set placement of sensors on an electric power system, measurements from these sensors can be used in conjunction with control logic to infer the state of the system.

The effect of electric field maximum on the Rabi flopping and generated higher frequency spectra

We investigate the effect of the electric field maximum on the Rabi flopping and the generated higher frequency spectra properties by solving Maxwell-Bloch equations without invoking any standard approximations. It is found that the maximum of the electric field will lead to carrier-wave Rabi flopping (CWRF) through reversion dynamics which will be more evident when the applied field enters the sub-one-cycle regime. Therefore, under the interaction of sub-one-cycle pulses, the Rabi flopping follows the transient electric field tightly through the oscillation and reversion dynamics, which is in contrast to the conventional envelope Rabi flopping. Complete or incomplete population inversion can be realized through the control of the carrier-envelope phase (CEP). Furthermore, the generated higher frequency spectra will be changed from distinct to continuous or irregular with the variation of the CEP. Our results demonstrate that due to the evident maximum behavior of the electric field, pulses with different CEP give rise to different CWRFs, and then different degree of interferences lead to different higher frequency spectral features.

Phase control of higher spectral components in the presence of a static electric field

We investigate the higher spectral component generations driven by a few-cycle laser pulse in a dense medium when a static electric field is present. Our results show that, when assisted by a static electric field, the dependence of the transmitted laser spectrum on the carrier-envelope phase (CEP) is significantly increased. Continuum and distinct peaks can be achieved by controlling the CEP of the few-cycle ultrashort laser pulse. Such a strong variation is due to the fact that the presence of the static electric field modifies the waveform of the combined electric field, which further affects the spectral distribution of the generated higher spectral components.

Guiding and confining fast electrons by transient electric and magnetic fields with a plasma inverse cone

The fast electron propagation in an inverse cone target is investigated computationally and experimentally. Two-dimensional particle-in-cell simulation shows that fast electrons with substantial numbers are generated at the outer tip of an inverse cone target irradiated by a short intense laser pulse. These electrons are guided and confined to propagate along the inverse cone wall, forming a large surface current. The propagation induces strong transient electric and magnetic fields which guide and confine the surface electron current. The experiment qualitatively verifies the guiding and confinement of the strong electron current in the wall surface. The large surface current and induced strong fields are of importance for fast ignition related researches.

The Get3 ATPase drives unidirectional targeting of tail-anchored membrane proteins

Efficient and accurate localization of membrane proteins is essential to all cells and requires a complex cascade of interactions between protein machineries. This is exemplified in the recently discovered Guided Entry of Tail-anchored protein pathway, in which the central targeting factor Get3 must sequentially interact with three distinct binding partners (Get4, Get1 and Get2) to ensure the targeted delivery of Tail-anchored proteins to the endoplasmic reticulum membrane. To understand the molecular and energetic principles that provide the vectorial driving force of these interactions, we used a quantitative fluorescence approach combined with mechanistic enzymology to monitor the effector interactions of Get3 at each stage of Tail-anchored protein targeting. We show that nucleotide and membrane protein substrate generate a gradient of interaction energies that drive the cyclic and ordered transit of Get3 from Get4 to Get2 and lastly to Get1. These data also define how the Get3/Tail-anchored complex is captured, handed over, and disassembled by the Get1/2 receptor at the membrane, and reveal a novel role for Get4/5 in recycling Get3 from the endoplasmic reticulum membrane at the end of the targeting reaction. These results provide general insights into how complex cascades of protein interactions are coordinated and coupled to energy inputs in biological systems.

Lehiaketa motor baten direkzio piparen diseinua

[EU]Hurrengo orrialdeetan aurkezten den proiektu honetan, lehiaketa motor baten direkzio piparen diseinua proposatzen da zeinak Moto Engineering Foundation fundazioak sustatutako nazioarteko Motostudent txapelketan parte hartzeko motorrera egokituta egon beharko den. Honako helburu honekin beraz, direkzio piparen diseinu egoki bat egin ahal izateko piezak sufrituko dituen karga egoerak aurreikusi beharko ditugu hauen arabera jasan beharreko tentsio egoerak aztertu ahal izateko. Piezaren tentsioen analisia aurrera eraman beharko da beraz, diseinaturiko piezaren funtzionamendu egokia ziurtatu ahal izateko. Historian zehar existitutako diseinu modelo ezberdinak eta baita gaur egunean gehien erabilitakoak ere aurkeztu eta gero, gure kasura hobekien moldatuko zaion adibidetik ekingo zaio diseinuari, aldez aurretik eskuratutako datu eta errodamenduetatik abiatuz. Horrenbestez, oinarritzat hartutako direkzio sistema modeloa eta bestelako elementuen neurriak datutzat hartuta, tija zein norabide ardatzarena esate baterako, direkzio piparen hasierako geometria definituko da. Eskuragarri ditugun analisi metodo ezberdinak aztertu eta gure kasura hobekien moldatzen dena aukeratu eta eraikitako piezari aplikatuko zaio. Lorturiko emaitzen arabera hasiera batean planteaturiko diseinua onartu edo baztertzea erabaki beharko dugu. Beraz, gure diseinua optimizatuz joateko aukera izango dugu, baldintzak eta betebeharrak egiztatuko dituen amaierako pieza diseinua lortu arte. Bukatzeko, proiektuari itxiera emango dion atala aurkeztuko da, hala nola, proiektuaren garapenean zehar lorturiko emaitzak eta ondorioak biltzen dituen atala non lorturiko direkzio piparen funtzionamendu egokia bermatzen dituzten parametroak aurkeztuko diren. Gainera, direkzio sistemaren funtsezko atala izango diren errodamenduen kalkulu eta aukeraketa bideratuko da baita ere.

Lehiaketako motor baten erditxasiaren diseinua

[EU]Proiektu honek lehiaketarako moto baten erditxasia garatzen du, baita txasira lotuta egongo den modua ere. Erditxasia pieza estruktural bat da eta nahiz eta agian beharrezkoa ez izan lehiaketako moto batean, izan ere hauetan pilotuek ipurdia oso aurrean kokatzen dute pisua txasira bideratuz, moto guztiek duten atal bat da eta pertsonaren pisua eta honek egiturari eragiten dizkion indar eta esfortzuak eusteko erabiltzen da. Kasu batzuetan txasiaren beraren barnean egoten da zati hau eta beraz dena pieza bat izaten da, baina gure kasuan biak, erditxasia eta txasia elkarri lotuta egongo dira. Hasteko erditxasi hau zein eratara fabrikatua izan daitekeen aztertuko da(hodi, txapa…), eta modu bakoitzaren abantailak eta desabantailak ikusi beharko dira azkenik nola egingo den aukeratzeko. Honela gure piezaren eboluzio bat emango da guk behar ditugun exijentzia teknikoak bete ditzan eta ekonomikoki ere bideragarria izan dadin. Amaitzeko pieza bere lekuan bermatzeko beharko diren elementu laguntzaileak ere kalkulatu edo aukeratu beharko dira, lehiaketan dugun portaera guk nahi duguna izan dadin.

Lehiaketa motor baten atzealde-suspentsio sistema doigarri baten elementuen diseinua

[EU]Proiektu hau lehiaketa motor baten atzealde-suspentsio sistema doigarri baten elementuen diseinuan datza. Luzeran erregulagarria izango den tirantea eta suspentsio triangelua diseinatu eta optimizatuko dira. Diseinuak ahalik eta pisu txikiena izatea ahalbidetzen duten makinen elementuak (errotulak eta errodamenduak) aukeratuko dira. Lanaren garapenerako Motostudent izeneko lehiaketatik hartutako datu errealak erabiliko dira. Suspentsio sistemaren diseinua Creo2.0 (lehengo Pro-Engineer) software-arekin egingo da. Bestalde, beste software batzuk ere erabiliko dira, hala nola, Working Model 2D eta ANSYS, sistemaren analisia errazteko.

Influence of composition on the structure, electric and magnetic properties of Pd-Mn-P and Pd-Co-P amorphous alloys

The influence of composition on the structure and on the electric and magnetic properties of amorphous Pd-Mn-P and Pd-Co-P prepared by rapid quenching techniques were investigated in terms of (1) the 3d band filling of the first transition metal group, (2) the phosphorus concentration effect which acts as an electron donor and (3) the transition metal concentration.

The structure is essentially characterized by a set of polyhedra subunits essentially inverse to the packing of hard spheres in real space. Examination of computer generated distribution functions using Monte Carlo random statistical distribution of these polyhedra entities demonstrated tile reproducibility of the experimentally calculated atomic distribution function. As a result, several possible "structural parameters" are proposed such as: the number of nearest neighbors, the metal-to-metal distance, the degree of short-range order and the affinity between metal-metal and metal-metalloid. It is shown that the degree of disorder increases from Ni to Mn. Similar behavior is observed with increase in the phosphorus concentration.

The magnetic properties of Pd-Co-P alloys show that they are ferromagnetic with a Curie temperature between 272 and 399°K as the cobalt concentration increases from 15 to 50 at.%. Below 20 at.% Co the short-range exchange interactions which produce the ferromagnetism are unable to establish a long-range magnetic order and a peak in the magnetization shows up at the lowest temperature range . The electric resistivity measurements were performed from liquid helium temperatures up to the vicinity of the melting point (900°K). The thermomagnetic analysis was carried out under an applied field of 6.0 kOe. The electrical resistivity of Pd-Co-P shows the coexistence of a Kondo-like minimum with ferromagnetism. The minimum becomes less important as the transition metal concentration increases and the coefficients of ℓn T and T^2 become smaller and strongly temperature dependent. The negative magnetoresistivity is a strong indication of the existence of localized moment.

The temperature coefficient of resistivity which is positive for Pd- Fe-P, Pd-Ni-P, and Pd-Co-P becomes negative for Pd-Mn-P. It is possible to account for the negative temperature dependence by the localized spin fluctuation model and the high density of states at the Fermi energy which becomes maximum between Mn and Cr. The magnetization curves for Pd-Mn-P are typical of those resulting from the interplay of different exchange forces. The established relationship between susceptibility and resistivity confirms the localized spin fluctuation model. The magnetoresistivity of Pd-Mn-P could be interpreted in tenns of a short-range magnetic ordering that could arise from the Rudennan-Kittel type interactions.