Ações horizontais em paredes e avaliação mecânica de vigas-lintel para aberturas de grande vão

As construções em alvenaria em Portugal ainda hoje representam um marco importante na construção portuguesa, sobretudo pela importância histórica associada às edificações. Grande parte das principais baixas das cidades portuguesas são brindadas com grandes e imponentes edifícios em alvenaria, fazendo parte integrante de uma herança deixada de uma tecnologia construtiva que não tem merecido a devida atenção pelas várias entidades responsáveis pela construção em Portugal. É então premente uma mudança profunda na construção em Portugal, fomentando a adoção de métodos construtivos mais ecológicos. É esta premissa que motiva este trabalho. Neste trabalho estudam-se algumas metodologias modernas de cálculo, nomeadamente os procedimentos de cálculo para obtenção das forças horizontais a aplicar a cada parede vertical resistente, tendo por base os recentes regulamentos europeus. Este trabalho pretende também entender melhor o comportamento de vigas de alvenaria sujeitas a ações verticais no seu plano. Para a execução de vigas-lintel é normalmente usada armadura ordinária, pelo que é apresentado e proposto um novo método construtivo usando armadura prefabricada de junta como principal armação das vigas-lintel. Finalmente, é apresentada e descrita a solução preconizada para as vigas-lintel sobre as aberturas e vigas-cintas numa moradia executada ao abrigo de um projeto de investigação. Durante a fase experimental deste estudo, foram executadas vigas de alvenaria com dois sistemas de armadura, o proposto e o normalmente usado, com o objetivo de comparar os resultados e os modos de rotura, a fim de avaliar e validar o método proposto. As vantagens mais evidentes deste método são: rapidez de execução, redução dos materiais usados e menor necessidade de mão de obra qualificada no corte, dobragem e montagem das armaduras. Palavras-Chave: , , , , , ,

The Brazilian real estate securitization market: determinants of pricing

Analisamos os determinantes de precificação de Certificados de Recebíveis Imobiliários (CRIs) com relação ao ativo objeto e níveis de garantias, controlando por variáveis de tamanho, prazo e rating. Verifica-se um prêmio médio adicional em CRIs de 1,0 p.p. quando comparados com debêntures de prazos semelhantes e de mesmo rating. A justificativa desse prêmio é analisada em duas frentes: (a) apesar de CRI seguir relativa padronização, encontramos que o papel pode representar diferentes níveis de risco e ativos-objeto; e (b) essa falta de padronização leva a níveis de precificação diferenciados por suas características específicas de riscos. Os diferentes níveis de risco são percebidos pelas diversas garantias utilizadas sendo que 41% das emissões possuem garantias pessoais de originadores (aval ou fiança). Conclui-se que existe, em geral, uma diferença de retornos positiva (o spread médio na emissão dos CRIs indexados à inflação foi de 321 bps superior à curva de juros de mercado), sendo mais preponderante a depender do segmento (prêmio para os segmentos residencial e loteamentos) e mitigado pelo nível de garantias oferecido. É possível verificar um prêmio médio de 1,4 p.p. para os segmentos residencial e de loteamentos. Algumas características das emissões foram analisadas como controle (tamanho, prazo e, por fim, das notas e origem da agência avaliadora de rating). Os CRIs de maior volume e maior prazo apresentam spreads menores. Quanto ao rating, os CRIs apresentam efeitos diversos a depender do segmento. Para CRIs residenciais, o efeito é positivo (redução de spread) caso a emissão seja avaliada por alguma agência de rating, enquanto que para os CRIs comerciais, o efeito é negativo. O efeito pode ser positivo para os CRIs comerciais (redução de spread) em caso de avaliação por agência de rating internacional ou possuir notas de rating superiores à nota ‘A’.

Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos

A incorporação de pigmentos na composição do betão é uma técnica aplicada como alternativa arquitetónica à pintura ou colocação de revestimentos em edifícios. Tratando-se de um betão à vista importa considerar cuidados adicionais na sua aplicação para assegurar a homogeneidade e qualidade do acabamento superficial. Utilizando betões autocompactáveis, não só a homogeneidade do material é aumentada devido à eliminação da compactação, como também o acabamento superficial é melhorado devido à maior capacidade de preenchimento dos moldes que estes betões apresentam. Neste trabalho dimensionam-se cinco composições de betão autocompactável colorido utilizando agregados britados vulcânicos correntemente utilizados no fabrico de betão na Região Autónoma da Madeira. Para o dimensionamento dos betões, realizaram-se vários estudos em pastas, de seguida em argamassas e finalmente em betões. Com o estudo das pastas obtiveram-se as primeiras informações sobre o efeito da introdução de pigmentos. Depois estudaram-se argamassas que continham o mesmo volume de areia relativo mas incorporando pastas com diferentes cores. Identificaram-se as pastas que conduziam a argamassas com propriedades reológicas semelhantes às da argamassa da composição considerada como referência. Nos betões começou-se por produzir uma composição de betão autocompactável de referência que foi caracterizada em termos de autocompactabilidade pelos ensaios de espalhamento, caixa L, funil V e segregação. Finalmente, realizaram-se composições de betões coloridos cujos conteúdos em agregados e finos eram os mesmos que os da composição de referência mas substituindo parcialmente o volume de água por igual volume de pigmentos. Os resultados mostraram que a incorporação de pigmentos conduz a uma ligeira perda de trabalhabilidade, sendo essa perda de trabalhabilidade facilmente compensada com um aumento da dosagem de superplastificante, cujo volume adicionado é substituído pela remoção de igual volume de água.

Desenvolvimento de um sistema de indicadores de desempenho para empreendimentos em construção civil, utilizando a abordagem macroergonômica

This paper prese nts the validation of the Performance Indicator System for Projects under Construction - SIDECC. The goal was to develop a system of performance indicators from the macroergonômica approach, con sidering criteria of usefulness , practicality and applicabilit y and the concept of continuous improveme nt in the construction industry . The validation process SIDECC consisted of three disti nct models . Modeling I corresponded to the theoretical development and valid ation of a system of indicators . Modeling II concern s the development and valida tion of multi - indicator system . For this modeling, we used the Mother of Use and Importance and Multivariate Analysis . Modeling III correspo nded to the validation situated , which consisted of a case study of a wo rk of construct ion of buildings , which were applied and anal yzed the results of modeling II . This work resulted in the development of an applied and tested for the construction of an integrated system of per formance indicators methodology , involving aspects of production , quality , e nvironmental, health and safety . It is inferred that the SIDECC can be applied, in full or in part , the construction companies as a whole, as we ll as in other economic sectors .

Proposta arquitetônica para o Centro de Treinamento dos Servidores do IFRN com base nos fatores de desempenho energético.

In recent years, as part of the expansion process of its activities, the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte – IFRN (Federal Institute for Education, Science and Technology of the State of Rio Grande do Norte – IFRN) detected the need to hire more employees for the institution. This expansion process, a policy of the Federal Government, together with the increase of human resources, required the construction of an adequate facility in the municipality of São Gonçalo do Amarante-RN, for training and qualification and as a means of better enabling its personnel. Along with this policy, the Federal Government is also deeply concerned that its buildings be environmentally friendly. This study deals with this subject matter, as it develops an architectural design of a public building with an emphasis upon the reduction of energy consumption, through the study of energy performance factors such as defined by Carneiro (1988) and adapted by the author of the present study. It is known that residential, commercial and public buildings represent about 45 % of energy consumption in Brazil. That is why it is necessary to consider the reduction of such consumption in buildings, as well as the role that professionals, especially architects, play in this issue. The most effective participation in this regard in the field of architecture occurs in the design phase. However, the architectural solution proposed here goes beyond the energy performance factors, since it also involves other aspects, such as the definition of the concept, the parti and the spatial solution itself. In this sense, the architectural project of the Centro de Treinamento dos Servidores do IFRN - CTSIFRN (Training Center for IFRN Personnel – CTSFIRN) is particularly fitting as a subject for research at the Professional Master Program at PPGAU/UFRN, which is devoted to research on architecture, design and the environment.

Recanto do vale do pium: condomínio de habitações com ênfase no baixo impacto ambiental e no desempenho térmico do ambiente construído

This work describes the design process of a small recreational gated community in Pium, Nísia Floresta/RN, from concept to final design stages, with emphasis on low environmental impact, thermal comfort and the spatial quality of housing. The process consisted in a review of the literature and relevant standards, studies of design references and architectural programming. The project development was initially focused on the project’s feasibility, with the definition of the number of units, implantation, size and location of the dwellings and the common areas of the development. Two types of houses (four low rise and five duplex units) have been proposed in order to attend the premises of architectural programming. The conception of the architectural design began with the rooms’ zoning according to the lots. This resulted in the pre-selection of three alternatives that were evaluated in terms of spatial quality and environmental performance. The development of sketches focused on the envelope consistent with the bioclimatic guidelines and on the language of the compatible proposal with the lowest possible environmental impact of the building system, which resulted in the selection of the eucalyptus wood type. During the working drawings, the Quality Technical Regulation for the Level of Energy Efficiency Residential Buildings (RTQ -R) was adopted for the evaluation of the envelope, which resulted in "B" level of efficiency for the first case. After minor adjustments, mainly in frames, the efficiency level rose to "A", demonstrating that early project decisions contributed to the envelope energy performance. Besides the design of the two types of units, the final proposal of the gated community includes the design of the equipment for the common areas (entrance, multipurpose room and support and service sector), and the descriptive texts explaining the project and construction’s details.

Arquitetura escolar Infantil modulada e flexível

For many y ears, the federal government policy is to use project for in order to speed up the work for decreasing the elementary education deficit vacancy . In Natal municipality the schoolhouses for children, from 0 to 6 years of age are denom inated Muinicipality Centre for Elementary Education. The federal government provides capital for the news edifications by the program of government named PROINFÂNCIA. This program embraces three types of projects. Type “A” must be furnished by the interes ted municipality and approved by Education and Cultura Ministry. The type “B” is standard plan with capability to 120 schoolchildren in full - time or 240 in two turns and ground plot measuring 40 x 70m and the “type C” also a standart projects to 60 schoolc hildren in full - time or 120 in two turns and ground plot measuring 35 x 45m. Sometimes , due to scarcity of bigger ground plot s is the “type C” instead of “type B”, referring to offering vacancies. In this meaning, this study intend s to present the draft - project to elementary schoolhouse, modulated and flexible, emphasizing the children needs . Therefore, it was studied concept, school architecture, construction technology, reference study and visiting to MCEE Fernanda Jales (PROINFÂNC IA “tipo B”). However, the proposal synthesizes the draft - project by module, implanting in its totality or in parts, according to its necessity and lot cha racteristic.

Arquitetura bioclimática para instituição de ensino fundamental em São Gonçalo do Amarante/RN

In the design of a building process must consider climatic variations in the region, the external conditions and the use of available resources in nature, like the sun, vegetation, rain and winds, to provide a built environment with comfort and environment reduced energy expenditure. However, increasing urbanization, often with an occupancy of disordered ground comes disregarding this knowledge and disregarding local characteristics, drastically reducing the green areas. This disordered occupation associated with the reduction of green spaces, is modifying aspects of climate and thus, damaging the thermal comfort of users. Given this situation was born the question: What projetuais strategies can bring better thermal conditions to an educational building located in a region of hot and humid weather? Thus, faced with two important issues , education and environmental comfort , the research is justified by the fact that there is a large national demand for expansions and renovations in its public schools , but not in most areas provides students with quality for good learning development. This paper aims to draw up a project for establishment of Primary Education with the application of the concepts of bioclimatic, highlighting the use of vegetation as a regulatory element of the climate. Initially we carried out a literature search; we analyzed architectural solutions and set up the site. The next phases, called understanding, were raised with the laws, rules and environmental restrictions. Subsequently, the program needs and the development of architectural design was defined. The conclusion of this paper presents the definition of criteria and solutions for the use of vegetation to design of bioclimatic architecture in hot and humid climates and contributes a catalog of plant species for schools in the metropolitan region of Natal, RN.

Integração da simulação termoenergética com o processo de projeto: a análise de 6 casos

This work consists of the integrated design process analyses with thermal energetic simulation during the early design stages, based on six practical cases. It aims to schematize the integration process, identifying the thermal energetic analyses contributions at each design phase and identifying the highest impact parameters on building performance. The simulations were run in the DesignBuilder energy tool, which has the same EnergyPlus engine, validated. This tool was chosen due to the flexible and user friendly graphic interface for modeling and output assessment, including the parametric simulation to compare design alternatives. The six case studies energy tools are three architectural and three retrofit projects, and the author the simulations as a consultant or as a designer. The case studies were selected based on the commitment of the designers in order to achieve performance goals, and their availability to share the process since the early pre-design analyses, allowing schematizing the whole process, and supporting the design decisions with quantifications, including energy targets. The thermoenergetic performance analyses integration is feasible since the early stages, except when only a short time is available to run the simulations. The simulation contributions are more important during the sketch and detail phases. The predesign phase can be assisted by means of reliable bioclimatic guidelines. It was verified that every case study had two dominant design variables on the general performance. These variables differ according the building characteristics and always coincide with the local bioclimatic strategies. The adaptation of alternatives to the design increases as earlier it occurs. The use of simulation is very useful: to prove and convince the architects; to quantify the cost benefits and payback period to the retrofit designer; and to the simulator confirm the desirable result and report the performance to the client

O projeto arquitetônico e a antecipação do projeto de segurança contra incêndio: interferência mútua, interação necessária

The great demand for Federal Institutions of High Education (IFES) design, triggered by the favourable political moment, boosts the public works market and brings with it the stigma of seeking the lowest cost and meet the federal Law 8.666/93 (Bids). In this context, this research makes an analysis of compliance with Fire Safety’s normative requirements in IFES’s architectural designs, taking this point as an evaluation of quality of designs. For the study, were used, IFES’s designs, specifically from UFERSA – Universidade Federal Rural do Semiárido and UFRN – Universidade Federal do Rio Grande do Norte, selected by the relationship use x public served and yet, in the replication of these buildings’ construction. The research was developed through the identification of the Fire Safety applicable legislation to the designs in question, with the determination of the demanded conditions that are architect’s autonomy or that affect the architectural design. Tabulated the requirements, through data collection and measures gathered in the blueprints, was made a comparison and verification of the compliance with these. The results of this evaluation reveal that the minimum requirements was not fulfilled and that IFES’s architectural designs, taken as object in this study, certainly will suffer restrictions in their regularization process with the Fire Department. It is concluded that is necessary an improvement in the IFES’s designs to meet the minimum fire safety regulations and improvement in quality. Moreover, the results direct to the understanding that level of knowledge about Fire Safety received in undergraduate by architects is insufficient for appropriate elaboration of architectural designs in this area.

O papel dos quintais urbanos na segurança alimentar, bem estar e conservação da biodiversidade

Residential homegardens have environmental and social roles in the urban environment. These green spaces can potentially minimize the impacts caused by the growth of cities, being an alternative to connect fragmented areas or offer refuge to wildlife and therefore support the conservation of biodiversity. In addition, the homegardens demonstrate a leading role in increasing human well-being by promoting socialization opportunities, contact with nature, local culture as well as improvements in food security for the urban families. Nevertheless, it is still unclear what specific characteristics of homegardens can act effectively in the conservation of the biodiversity, as well as in the construction of food security and well being of the homegardeners and their families. The first chapter of this thesis analyzed the diversity of plant species (native and exotic) and assessed the contribution of different types of urban gardens (ornamental and forest gardens alike) in the presence of wildlife such as birds, monkeys and lizards. In the second chapter we evaluated the contribution of those gardens to the welfare and food security of their owners. In order to do this, 41 gardens were visited in Pium, a southern coastal town in the northeastern Brazil, which also happens to be in a periurban region undergoing rapid urban expansion and pressure from the real estate market. We surveyed the planned biodiversity and fauna associated with homegardens. The data related to food security and welfare were sampled through interviews with the person in charge of taking care of the gardens. These interviews covered issues on the supply of food from the garden and absence of chemical products, as well as aspects of the GNH indicator (Gross National Happiness). The results showed that these homegardens generally contribute little to the maintenance of native plant species (native species = 29/ total = 187). From its main features, the gardens were classified as ornamental, forest gardens and forest farms. These groups had a different effect on the presence of the animals studied and the last two contained most of the sampled native species. The diversity of plants and trees was a good predictor of the presence of birds and monkeys. Thus, the contribution of yards for the conservation of biodiversity depends on the type of garden: some even can have negative effects on conservation. These results can direct new approaches to detailed understanding of gardens and also of public policies applied to urban planning. The results of the second chapter showed that the two types of forest gardens contributed to household food security, for providing food and medicinal herbs, which mostly did not have pesticides and chemical 12 fertilizers. But the three groups of gardens are important components for the well being of their stakeholders. Gardens help promote the transmission of knowledge on agriculture, socialization, contact with nature and bring up feelings related to peace and harmony. Thus, forest gardens can be considered important means to get through public projects and policies designed to encourage biodiversity and promote food security and well-being in urban areas

Integração de projetos no ensino através de BIM: uma abordagem dos cursos de arquitetura e urbanismo da UFRN e da UFPB

The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.

Atmosferas arquitetônicas: projeto e percepção na obra de Peter Zumthor

This thesis will discuss the topic architectural atmospheres, based on Peter Zumthor's works and narrative. The subject "architectural atmospheres" is defined in the study as the "complex and general condition, realized by the user during the experience of a place". Atmospheres are composed of the overlap of all physical qualities that compound a space and its perception, conditioned by individual issues of the user. The atmosphere is realized through all human body receivers, in a multi-sensorial process, and affects qualitatively the spacial experience of the places created by architecture. The study has three chapters. The first chapter is a reflection on the issues that architectural atmospheres present. It passes through the concept and definition of the subject and includes a compilation of design principles that act on the architectural atmosphere composition in a variety of projects by a range of professionals. In the second chapter, the procedures adopted by Peter Zumthor in his design process that focus on atmosphere composition are studied. In the third and last chapter, Brother Claus Chapel (Wachendorf, German) and Kolumba Museum (Colon, German) projects, both by Peter Zumthor, are analyzed, in order to comprehend the complex role of elements that constitute the architectural atmosphere of each of these places. The methodology used throughout the thesis consists of bibliography and documental analysis, based on books, plans and material searched on Internet. Furthermore, the project analysis counted with the personal experience of the author of this thesis upon visiting the studied buildings. Finally, in conclusion, it is realized that when architecture is made in order to touch the user, expressed by its built objects, it can be provide a vast conceptual and theoretical basis that valorizes and enriches the experience of its use. It (the architectural atmosphere) is related to an approach that uses the same elements of any other construction, but distinguishes itself by the connections that it implies with humans and its environment. In the face of new patterns unveiled for contemporary architecture, this study contribution is based around the opportunity to understand this particular relationship between user and architectural object, identified as a phenomenological approach of architecture, as well as to update the subject bibliography, still scarce among Brazilian universities.

Esquina edifício: uma proposta arquitetônica para um edifício misto

Natal, como outras cidades metropolitanas brasileiras, sofreu nas últimas décadas uma forte transformação impulsionada pelo mercado imobiliário e pela indústria da construção civil. A produção de apartamentos em condomínios fechados vem crescendo e tornando cada vez mais comum, no cenário urbano, a presença de torres residenciais (com extensos muros e grades, fachadas cegas e guaritas) que favorecem o “desurbanismo”. Por outro lado, este tipo de empreendimento, o edifício multifamiliar, apresenta plantas baixas padronizadas as quais frequentemente são incoerentes com a diversidade de perfis dos usuários. A consequência disso são reformas e adequações nos apartamentos após a entrega da obra. Diante deste contexto, elaborei uma proposta arquitetônica, que é apresentada nesta dissertação, como alternativa a essa modalidade de produção que está se tornando dominante no Brasil e em outros países. Dois conceitos nortearam esta proposta: a) o conceito de urbanidade cujo objetivo no projeto arquitetônico é favorecer a percepção do outro (por copresença e/ou cociência) através da permeabilidade, acessos e passagens entre o edifício e o entorno. A maneira como os cheios (barreiras) se estruturam com os vazios foi trabalhada de modo que definissem propriedades espaciais cuja intenção é facilitar o encontro e a diversidade entre moradores e entre estes e os de fora, no entanto sem desconsiderar o problema da violência urbana e, consequentemente a importância da promoção de segurança para os usuários. b) o conceito de flexibilidade a fim de possibilitar ao consumidor final o desmembramento da unidade habitacional em duas e, em especial, a participação e ou escolha na concepção do arranjo interno e da definição dos acabamentos do seu apartamento. Tudo isto durante a construção do empreendimento e ao longo da sua vida útil, favorecendo assim o potencial de diversidade (grupos sociais), adaptabilidade a fases distintas da vida e durabilidade do edifício.

Análise do impacto do sombreamento vegetal no conforto termo-luminoso em edificações no clima quente e úmido

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.