Possible artemisinin-based combination therapy-resistant malaria in Nigeria: a report of three cases

Artemisinin-based combination therapy-resistant malaria is rare in Sub-Saharan Africa. The World Health Organization identifies monitoring and surveillance using day-3 parasitaemia post-treatment as the standard test for identifying suspected artemisinin resistance. We report three cases of early treatment failure due to possible artemisinin-based combination therapy-resistant Plasmodium falciparum malaria. All cases showed adequate clinical and parasitological responses to quinine. This study reveals a need to re-evaluate the quality and efficacy of artemisinin-based combination therapy agents in Nigeria and Sub-Saharan Africa.

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

The occurrence and dissemination of methicillin and vancomycin-resistant Staphylococcus in samples from patients and health professionals of a university hospital in Recife, State of Pernambuco, Brazil

Introduction Methicillin-resistant Staphylococcus aureus (MRSA) strains have been responsible for many nosocomial outbreaks. Within hospitals, colonized employees often act as reservoirs for the spread of this organism. This study collected clinical samples of 91 patients admitted to the intensive care unit (ICU), hemodialysis/nephrology service and surgical clinic, and biological samples from the nasal cavities of 120 professionals working in those environments, of a University Hospital in Recife, in the State of Pernambuco, Brazil. The main objective of this study was to determine the occurrence and dissemination of methicillin- and vancomycin-resistant Staphylococcus spp. Methods The isolates obtained were tested for susceptibility to oxacillin and vancomycin and detection of the mecA gene. In addition, the isolates were evaluated for the presence of clones by ribotyping-polymerase chain reaction (PCR). Results MRSA occurrence, as detected by the presence of the mecA gene, was more prevalent among nursing technicians; 48.1% (13/27) and 40.7% (11/27) of the isolates were from health professionals of the surgical clinic. In patients, the most frequent occurrence of mecA-positive isolates was among the samples from catheter tips (33.3%; 3/9), obtained mostly from the hemodialysis/nephrology service. Eight vancomycin-resistant strains were found among the MRSA isolates through vancomycin screening. Based on the amplification patterns, 17 ribotypes were identified, with some distributed between patients and professionals. Conclusions Despite the great diversity of clones, which makes it difficult to trace the source of the infection, knowledge of the molecular and phenotypic profiles of Staphylococcus samples can contribute towards guiding therapeutic approaches in the treatment and control of nosocomial infections.

Genome-scale metabolic network reconstruction of Polaromonas sp. strain JS666: analysis of cDCE degradation rates and design of experiments for bioremediation improvement

Release of chloroethene compounds into the environment often results in groundwater contamination, which puts people at risk of exposure by drinking contaminated water. cDCE (cis-1,2-dichloroethene) accumulation on subsurface environments is a common environmental problem due to stagnation and partial degradation of other precursor chloroethene species. Polaromonas sp. strain JS666 apparently requires no exotic growth factors to be used as a bioaugmentation agent for aerobic cDCE degradation. Although being the only suitable microorganism found capable of such, further studies are needed for improving the intrinsic bioremediation rates and fully comprehend the metabolic processes involved. In order to do so, a metabolic model, iJS666, was reconstructed from genome annotation and available bibliographic data. FVA (Flux Variability Analysis) and FBA (Flux Balance Analysis) techniques were used to satisfactory validate the predictive capabilities of the iJS666 model. The iJS666 model was able to predict biomass growth for different previously tested conditions, allowed to design key experiments which should be done for further model improvement and, also, produced viable predictions for the use of biostimulant metabolites in the cDCE biodegradation.

Relatório de estágio na agência Ogilvy. A importância dos testes de usabilidade e do Responsive Web Design no desenvolvimento de projetos digitais

O presente relatório de estágio enquadra-se no método de avaliação final do Mestrado em Novos Media e Práticas Web, da Faculdade de Ciências Sociais e Humanas da Universidade Nova de Lisboa e pretende abordar o trabalho desenvolvido por mim durante o estágio curricular realizado na agência de comunicação e publicidade Ogilvy. O estágio decorreu entre novembro de 2014 e fevereiro de 2015, durante o qual desempenhei o cargo de online producer e fui supervisionada por Sara Cabral Fonseca, diretora de projeto. Todos os trabalhos tiveram como objetivo principal o acompanhamento e conhecimento do processo ligado ao desenvolvimento de projetos digitais, desde o briefing até à programação e conteúdo. Os trabalhos compreenderam a realização de testes de usabilidade em deskop e mobile dos sites e aplicações desenvolvidos pelo departamento digital da empresa, e também o apoio na realização de tarefas ligadas à gestão de conteúdos de vários websites. Este relatório resulta de todo o trabalho concretizado e pretende efetuar uma contextualização teórica ligada à importância dos testes de usabilidade e do Responsive Web Design (RWD) na implementação de projetos digitais.

First case of Helicobacter pyloriinfection resistant to seven antibiotics in Iran

Treatment of Helicobacter pylori infection with common antibiotics is typically recommended for several digestive conditions, including peptic ulcers. However, reports of resistant H. pylori isolates are increasing, and unfortunately, these do not respond to currently available therapeutic regimens. We report the case of a 31-year-old woman with two peptic ulcers in the duodenal antrum. An H. pylori strain was isolated, and tested for antibiotic resistance using agar dilution and disk diffusion. The isolated strain was found to be resistant to all seven antibiotics that were tested. Therefore, constant monitoring for antibiotic resistance should be performed prior to initiating antibiotic therapy.

Frequency of the toxic shock syndrome toxin-1 gene in methicillin-susceptible and -resistant Staphylococcus aureus isolates from teaching hospitals in Shiraz, Iran

INTRODUCTION: Staphylococcus aureus produces a range of virulence factors such as toxic shock syndrome toxin-1. METHODS: In this cross-sectional study of 345 clinical S. aureus isolates, the presence of the tst gene was assessed by polymerase chain reaction (PCR). RESULTS: The study revealed 53/345 (15.4%) isolates were positive for the tst gene. The tst gene was present in 18.1% of methicillin-susceptible S. aureus (MSSA) isolates and 11.6% of methicillin-resistant S. aureus (MRSA) isolates (p = 0.136). CONCLUSIONS: These results reveal the remarkable risk of S. aureus infections in hospitals, regardless of methicillin-resistance status.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Induction and nosocomial dissemination of carbapenem and polymyxin-resistant Klebsiella pneumoniae

INTRODUCTION:Polymyxins are antimicrobial agents capable of controlling carbapenemase-producing Klebsiella pneumoniae infection.METHODS: We report a cluster of four patients colonized or infected by polymyxin-resistant and Klebsiella pneumoniae carbapenemase (KPC)-producing K. pneumoniae.RESULTS: Three patients were hospitalized in adjacent wards, and two were admitted to the intensive care unit. The index case maintained prolonged intestinal colonization by KPC-producing K. pneumoniae. Three patients received polymyxin B before the isolation of polymyxin-resistant K. pneumoniae.CONCLUSIONS: Colonization by KPC-producing K. pneumoniae and previous use of polymyxin B may be causally related to the development of polymyxin-resistant microorganisms.

Influence of a subinhibitory concentration of vancomycin on the in vitro expression of virulence-related genes in the vancomycin-resistant Enterococcus faecalis

ABSTRACTINTRODUCTION:Exposure to subinhibitory concentrations (SICs) of antimicrobials may alter the bacterial transcriptome.METHODS: Here, we evaluated the expression of nine virulence-related genes in vancomycin-resistant enterococci (VRE) urinary tract infection isolates grown at SICs of vancomycin.RESULTS:A Subinhibitory concentrations of vancomycin interferes with gene modulation, but does not affect the phenotype of a VRE strain in vitro .CONCLUSIONS:Subinhibitory concentrations of vancomycin may regulate the expression of virulence factors in vivo or contribute to the selection of vancomycin-resistant strains.

Antimicrobial resistance profiles and oxacillinase genes in carbapenem-resistant Acinetobacter baumannii isolated from hospitalized patients in Santa Catarina, Brazil

Abstract: INTRODUCTION: Carbapenems are the therapy of choice for treating severe infections caused by the Acinetobacter calcoaceticus-Acinetobacter baumannii complex. We aimed to assess the prevalence and antimicrobial susceptibility profiles of producers of distinct oxacillinases among nosocomial isolates of the A. calcoaceticus-A. baumannii complex in a 249-bed general hospital located in Joinville, Southern Brazil. METHODS: Of the 139 A. baumannii clinical isolates with reduced susceptibility to carbapenems between 2010 and 2013, 118 isolates from varying anatomical sites and hospital sectors were selected for genotypic analysis. Five families of genes encoding oxacillinases, namely blaOXA-23-like, blaOXA-24-like, blaOXA-51-like, blaOXA-58-like, and blaOXA-143-like, wereinvestigated by multiplex polymerase chain reaction (PCR). RESULTS: Most (87.3%) isolates simultaneously carried the blaOXA-23-likeand blaOXA-51-likegenes, whereas three (2.5%) isolates harbored only blaOXA-51-likeones. The circulation of carbapenem-resistant isolates increased during the study period: from none in 2010, to 22 in 2011, 64 in 2012, and 53 in 2013. CONCLUSIONS: Isolates carrying the blaOXA-23-likeand blaOXA-51-likegenes were widely distributed in the hospital investigated. Because of the worsening scenario, the implementation of preventive measures and effective barriers is needed.