Entorno de desarrollo para clusters

El presente trabajo expone los entornos de desarrollo de aplicaciones paralelas en sistemas distribuidos. Se ha dedicado especial atención a los entornos gráficos, como plataforma de acceso al cluster. Dada la cantidad de alternativas a seleccionar en este tipo de entornos, como puede ser la parametrización de las aplicaciones, especificación de la arquitectura a utilizar de los nodos, caracterización de la carga, políticas de planificación, etc, hace que este trabajo pueda servir de punto inicial de partida a usuarios que deseen iniciarse en este tipo de entornos.

The Importance of Revenue Sharing for the Local Economic Impacts of a Renewable Energy Project: A Social Accounting Matrix Approach

As demand for electricity from renewable energy sources grows, there is increasing interest, and public and financial support, for local communities to become involved in the development of renewable energy projects. In the UK, “Community Benefit” payments are the most common financial link between renewable energy projects and local communities. These are “goodwill” payments from the project developer for the community to spend as it wishes. However, if an ownership stake in the renewable energy project were possible, receipts to the local community would potentially be considerably higher. The local economic impacts of these receipts are difficult to quantify using traditional Input-Output techniques, but can be more appropriately handled within a Social Accounting Matrix (SAM) framework where income flows between agents can be traced in detail. We use a SAM for the Shetland Islands to evaluate the potential local economic and employment impact of a large onshore wind energy project proposed for the Islands. Sensitivity analysis is used to show how the local impact varies with: the level of Community Benefit payments; the portion of intermediate inputs being sourced from within the local economy; and the level of any local community ownership of the project. By a substantial margin, local ownership confers the greatest economic impacts for the local community.

Chronic beryllium disease as a re-emerging occupational disorder possibly misdiagnosed as sarcoidosis : a Swiss study project

Background: Beryllium (Be) is increasingly used worldwide for numerous industrial applications. Occupational exposure to Be may lead to Be sensitization (BeS), a CD4-mediated immune response. BeS may progress to chronic beryllium disease (CBD), a granulomatous lung disorder closely resembling sarcoidosis. The recognition of CBD requires detection of Be exposure at occupational history, and detection of BeS on blood or BAL lymphocytes. Since methods for CBD detection are not routinely available in Switzerland, we hypothesized that CBD cases are not recognized but misdiagnosis as sarcoidosis. Objective: To present an ongoing Swiss study screening patients with sarcoidosis in search of Be exposure, BeS, and CBD. Methods: Both a prospective and a retrospective cohort are being studied. In the prospective cohort, the main steps include: 1) recruitment of 100 consecutive patients with newly diagnosed pulmonary sarcoidosis at 2 centers (Lausanne, Bern). 2) screening for possible occupational Be exposure by self-administered patient questionnaire. 3) standardized detailed occupational interview and clinical visit by occupational health specialist. If step 3 is positive, then 4) blood and BAL sampling for detection of BeS by specifically developed Elispot assay and CFSE flow cytometry, with subsequent comparison to the classical Be lymphocyte proliferation test. If step 4 is positive, then 5) review of medical records and diagnostic revision from sarcoidosis to CBD. 6) appropriate measures for exposure cessation and case reporting to SUVA as occupational disease. The retrospective cohort will include 400 patients with previously diagnosed pulmonary sarcoidosis, either treated or untreated, recruited through the SIOLD Registries. Steps 2 to 5 will be peformed as above, except for a) end of study after step 2 if screening questionnaire does not reveal Be exposure, and b) step 4 done on blood sample only (BAL not needed). Current status: Self-administered screening questionnaire and tools for standardized occupational interview have been developed. BeS testing has been implemented and undergoes validation. Inclusions in the prospective phase have started at both study sites. The retrospective phase is in preparation. Conclusion: The current study status allows to conclude to technical feasibility of the project. The prospective phase if this study is funded by the SUVA. The SIOLD Registries are supported by the Swiss Pulmonary League.

Hand exposure in diagnostic nuclear medicine with 18F- and 99mTc-labelled radiopharmaceuticals - Results of the ORAMED project

Workers performing preparation and administration of radiopharmaceuticals in NM departments are likely to receive high local skin doses to the hands which may even surpass the dose limit of 500 mSv whenever radiation protection standards are insufficient. A large measurement campaign was organised within the framework of the ORAMED project to determine the dose distribution across the hands received during preparation and administration of 18F- and 99mTc-labelled radiopharmaceuticals. The final data, collected over almost 3 years, include 641 measurements from 96 workers in 30 NM departments from 6 European countries. Results have provided levels of reference doses for the considered standard NM diagnostic procedures (mean maximum normalised skin dose of 230 μSv/GBq, 430 μSv/GBq, 930 μSv/GBq and 1200 μSv/GBq for the administration of 99mTc, preparation of 99mTc, administration of 18F and preparation of 18F, respectively). Finger dose was analysed as a function of the potential parameters of influence showing that shielding is the most efficient means of radiation protection to reduce skin dose. An appropriate method for routine monitoring of the extremities is also proposed: the base of the index finger of the non-dominant hand is a suitable position to place the ring dosemeter, with its sensitive part oriented towards the palm side; its reading may be multiplied by a factor of 6 to estimate the maximum local skin dose. Finally, results were compared to earlier published data, which correspond mostly to individual works with a reduced number of workers and measurements.

Taxation and Total Government Take from the UK Continental Shelf (UKCS) Following Phase 3 of the European Emissions Trading Scheme (EU ETS)

NORTH SEA STUDY OCCASIONAL PAPER No. 117

A double-blind, randomized study comparing pure chromated glycerin with chromated glycerin with 1% lidocaine and epinephrine for sclerotherapy of telangiectasias and reticular veins.

BACKGROUND Chromated glycerin (CG) is an effective, although painful, sclerosing agent for telangiectasias and reticular leg veins treatment. OBJECTIVE To determine pain level and relative efficacy of pure or one-third lidocaine-epinephrine 1% mixed chromated glycerin in a prospective randomized double-blind trial. METHOD Patients presenting with telangiectasias and reticular leg veins on the lateral aspect of the thigh (C(1A) or (S) E(P) A(S) P(N1) ) were randomized to receive pure CG or CG mixed with one-third lidocaine-epinephrine 1% (CGX) treatment. Lower limb photographs were taken before and after treatment and analyzed by blinded expert reviewers for efficacy assessment (visual vein disappearance). Patients' pain and satisfaction were assessed using visual analogue scales. RESULTS Data from 102 of 110 randomized patients could be evaluated. Patient pain scores were significantly higher when pure CG was used than with CGX (p<.001). Patient satisfaction with treatment outcome was similar in the two groups. Objective visual assessment of vessel disappearance revealed no significant difference between the two agents (p=.07). CONCLUSION Addition of lidocaine-epinephrine 1% to CG, in a ratio of one-third, significantly reduces sclerotherapy pain without affecting efficacy when treating telangiectasias and reticular leg veins. The authors have indicated no significant interest with commercial supporters.

The Difference, System and ‘Double-D’ GMM Panel Estimators in the Presence of Structural Breaks

The effects of structural breaks in dynamic panels are more complicated than in time series models as the bias can be either negative or positive. This paper focuses on the effects of mean shifts in otherwise stationary processes within an instrumental variable panel estimation framework. We show the sources of the bias and a Monte Carlo analysis calibrated on United States bank lending data demonstrates the size of the bias for a range of auto-regressive parameters. We also propose additional moment conditions that can be used to reduce the biases caused by shifts in the mean of the data.

Interet de la double voie d'abord dans les blepharoplasties superieures associees aux malpositions palpebrales. [Advantages of a double approach to upper blepharoplasty associated with eyelid malpositions]

During upper blepharoplasty, myocutaneous excess and fat pads are treated using an anterior approach. Eyelid malpositions such as involutional ptosis or lid retraction could be associated and should be treated with associated procedures. Aponeurotic surgery on the levator muscle can make use of the same anterior approach, with the major difficulty of dosage. In cases of ptosis with a positive epinephrine test or minor muscular retraction, the Muller muscle-conjunctival surgery via a posterior approach seems to be more reproducible. Double-approach techniques are described.

Cholestérol, pression artérielle et fumée de cigarette dans la population en Suisse: le projet MONICA. [Cholesterol, blood-pressure and cigarette-smoking in switzerland - the MONICA-project].

Elevated plasma cholesterol, high blood pressure and cigarette smoking are three major risk factors for coronary heart disease. Within the framework of Switzerland's participation in the multicenter study MONICA (MONItoring of trends and determinants in CArdiovascular disease), proposed by the WHO, a first risk factor survey was conducted in a representative sample of the population (25-74 years) of two reporting units (cantons of Vaud and Fribourg, canton of Tessin). A high blood cholesterol level (>6,7 mmol/l) is the most common risk factor for coronary heart disease among the studied population. Among men, about 13% have elevated blood pressure, the proportion being about one in ten among women; these proportions increase with age and are slightly above these values in Tessin. Cigarette smoking is still a common behavior; between 25 and 45 years one third of the population (male and female) regularly smoke cigarettes.

Should hypertensive patients take vitamin d?

The prevalence of both hypertension and vitamin D deficiency is high. The discovery of the vitamin D receptor and its possible effects on components of the cardiovascular system influencing blood pressure, such as the renin angiotensin system, the heart, the kidney and the blood vessels, has generated the hope that vitamin D therapy could be a new target for the treatment for hypertensive patients. Cross-sectional studies have clearly shown an association between low levels of vitamin D and hypertension. This association is not as clear in longitudinal studies. Finally, evidence from randomized controlled trials specifically designed to test the hypothesis of a blood pressure lowering effect of vitamin D is weak. Therefore, there is actually not enough evidence to recommend giving vitamin D to reduce blood pressure in hypertensive patients.

Anàlisi, disseny i implementació d'una eina de simulació per a l'estudi de la interoperabilitat mitjançant conversió d'atributs en entorns multi-domini

El present projecte part d’un estudi sobre el tractament de situacions d’emergència, on es considera que una infraestructura de comunicació, sobre aquest tipus d’escenaris, ha d’implementar la interoperabilitat i el control d’accés, entre els diferents elements que hi participen, utilitzant la conversió d’atributs. Per tal de materialitzar aquest estudi s’ha realitzat un anàlisi de les necessitats de l’aplicació i un disseny detallat dels mòduls que el formen. S’ha implementat d’aquesta manera una eina de simulació per entorns multi-domini. Finalment s’han realitzat un conjunt de proves per comprovar la seva fiabilitat respecte l’estudi original.