1000 resultados para Deyeuxia Clarion ex Beauv.


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Malformations and possible damages to the urogenital system can be originated in the embryonic period. Moreover, fire guns, knives and accidents, where there is the disruption of the urethra, also cause these lesions. The objective was to analyze the contribution of tissue engineering in the construction of neo-urethra, developed by bioengineering. We performed an urothelial ex vivo expansion of cells in 3D scaffolds (platelet gel matrix and acellular porcine aorta) to assess the contribution of this technique in the construction of a neo-urethra. Mechanical dissociation was made of the inner wall of 10 North Folk rabbit’s bladder, weighing 2.5 to 3.0 kg. After dissociation the cell content was centrifuged and obtained a pellet of urothelial cells. The pellet was ressuspended in culture medium DMEM F12 and cells were maintained in culture for 15 days. Immunohistochemical analysis characterized the urothelial culture. The cells were then implanted in the scaffold - platelet gel. In a second experiment using aortic porcine acellular matrix were implanted urothelial cells alone and urothelial cells on platelet gel, on the inner wall of the scaffold - aorta, with space for setting bordered by a urethral probe. The complex probe - cells - aorta and probe - cells in platelet gel - aorta, were sealed with suture material and culture were maintained in a humidified 37ºC incubator with 5% CO2 in air for 12 days to subsequent histological analysis of urothelium cell adhesion to the scaffolds. By observation under an optical microscope, we could see the growth of cells in the scaffold platelet gel, from a monolayer in to a three-dimensional structure. In the acellular porcine aortic matrix containing the platelet gel, we could observe a few quantity of urothelial cells adhered. However with the acellular porcine aortic matrix in which was implanted only the urothelial cells, we have obtained adhesion to the wall

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tabebuia avellanedae Lorentz ex Griseb (ipê-roxo), Bignoniaceae, ocorre na Floresta Tropical Atlântica e é de grande importância, uma vez que, devido às suas propriedades medicinais e lenho de grande valor comercial, já esteve sob ameaça de extinção. A mistura de reguladores vegetais é conhecida como bioestimulante que pode incrementar o desenvolvimento vegetal, estimulando a divisão, a diferenciação e o alongamento celular. Assim, neste trabalho avaliou o efeito da aplicação da mistura de reguladores vegetais do grupo das auxinas, giberelinas e citocininas no desenvolvimento de plantas jovens de ipê-roxo. Os tratamentos foram: testemunha, GA4+7 + BAP 100 mg L-1, GA4+7 + BAP 200 mg L-1, GA3 + IBA + cinetina 0,5% e GA3 + IBA + cinetina 1,0% os quais foram aplicados 4 vezes em intervalos de 30 dias. O efeito dos tratamentos foi avaliado pelas medidas de altura das plantas, diâmetro do caule, número de folhas, massa seca das folhas, caule e raízes e avaliação de trocas gasosas. O tratamento com GA3 + BAP 200 mg L-1 foi aquele que apresentou maior efeito no crescimento das plantas. Já para as avaliações fotossintéticas o tratamento com GA3 + IBA + cinetina foi aquele que apresentou a maior taxa de assimilação de CO2

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to determine the best pre-germination treatments for seeds and the best size container for seedlings growing of coral tree Erythrina mulungu (Mart. ex. Benth). Among the treatments applied to seeds, scarification with sulfuric acid during 10 minutes and cutting stylus in the region opposite to hilum resulted, respectively, in highest values of germination percentage (82.8% and 82.1%) and rates of germination speed (1.15 and 1.71). The biometric variables indicated no effect of container size on leaf area and dry mass plants. At 63 days after sowing, although with Dickson quality score statistically similar (mean 0.26), only plants grown in small and large bags reached the diameter collect close to 5 mm, minimum recommended for field planting. According to the results, for initial development of coral tree, it is recommended pre-seed treatment with sulfuric acid commercial, sowing in plastic bags of 17 x 20 cm, and wait 63 days before planting in the field.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Biological activities of flavonoids have been extensively reviewed in literature. The biochemical profile of afzelin, kaempferitrin, and pterogynoside acting on reactive oxygen species was investigated in this paper. The flavonoids were able to act as scavengers of the superoxide anion, hypochlorous acid and taurine chloramine. Although flavonoids are naturally occurring substances in plants which antioxidant activities have been widely advertised as beneficial, afzelin, kaempferitrin, and pterogynoside were able to promote cytotoxic effect. In red blood cells this toxicity was enhanced, depending on flavonoids concentration, in the presence of hypochlorous acid, but reduced in the presence of 2,20 -azo-bis(2-amidinopropane) free radical. These flavonoids had also promoted the death of neutrophils, which was exacerbated when the oxidative burst was initiated by phorbol miristate acetate. Therefore, despite their well-known scavenging action toward free radicals and oxidants, these compounds could be very harmful to living organisms through their action over erythrocytes and neutrophils.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Botânica) - IBB

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson’s correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: The radiographic characteristics of a biomaterial, such as its density, may influence the evaluation of the results obtained following its clinical use. Objective: The aim of this study was to evaluate the radiographic density of biomaterials used as bone substitutes, inserted into dental sockets and bone defects in created in the jaws of pigs. The influence of a soft tissue simulator on the results was also evaluated. Material and method: Two and three-millimeter-deep bone defects were created in the pigs mandible and the right first molar extraction socket were used. Commercial samples of five biomaterials were tested: Hydroxyapatite, Lyophilized Bovine Bone, 45S5 bioglass (generic), PerioGlass and β-Tri-Calcium Phosphate, and compared to a positive (mandibular bone) and negative (empty alveolar bone defects) controls. Radiographic images were acquired with and without a 10 mm thick soft-tissue simulator. Result: The results for the extraction sockets showed no differences between the biomaterials and the negative control. For the bone defects, the depth of the defect density influenced the density, both in the negative control (p < 0.01) and biomaterials (p < 0.05) groups. The soft- tissue simulator did not alter the results. Conclusion: The type of the evaluated defect can interfere in the radiographic features presented by each biomaterial, while the simulation of soft tissues was not statistically significant.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The main objective of this work was to mount and test an experimental model to measure the hydraulic conductance of ex vivo dentin. Seventeen healthy third molars, with indication of extraction of healthy donors aged between 15 and 30 years were obtained by informed consent. After cleaning them, disinfecting them, including them in resin epoxy and cutting them, there were 17 samples of dentin, corresponding to a disk of resin with a coronal section of tooth showing the dentin exposed on both sides of it. Three machines to measure the hydraulic conductance of the dentin were assembled according to the description of the model of Pashley. Samples were installed in a Chamber of diffusion, connected by using silicone tubes to a graduated transfer pipette and a 20cm water column. Through the displacement of a bubble of water in the inside of the pipette, the hydraulic conductance of each sample was measured 3 times on the 14th, 21st, 28th and 35th day post extraction. The data were tabulated and analyzed statistically. There is no SS difference in the rate of flow of a measured sample in the three machines (p=0.5937). There is no SS difference in measurements of the hydraulic conductance of 13 samples of human dentin measured in days 14, 21, 28 and 35 postextraction (p=0.0704). It is possible to mount an experimental model to study the hydraulic conductance of dentin ex vivo, based on the model of Pashley. The model seems to be reliable, but more research is needed in order to validate its reliability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In Brazil, Eucalyptus grandis Hill ex Maiden is widely used for commercial reforestation, especially for production of pulp, paper and energy. Its genetic variability is being explored in tree improvement programs for over 30 years. The objective of this work was to estimate genetic parameters and compare genetic gains by multi-effects index in a breeding population of E. grandis. Progeny tests were established using open-pollinated seeds from ten provenances ranging from 153 to 160 progenies established in a completely randomized block design in four sites of Sao Paulo State (Anhembi, Avere Itarare e Pratania). At 24 months of age the traits diameter at breast height (DBH), height (ALT) and volume (VOL) were measured. The individual site analyses indicated significant genetic differences among progenies, height genetic variability and the mean progeny heritability (> 0.70). For joint analyses of sites, significant differences in genotype x environmental interaction effects were detected, showing differences of performance of the progenies in different sites. The Itarare site gave high genetic gains, effective size and genetic diversity. The genetic diversity and low effective size are unviable factors; considering that the progeny tests studied should retain adequate levels of genetic variability in order to be transformed in future seedling seed orchards.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work was based to study the influence of the storage temperature (cold and room temperature) in the quality of inflorescences strelitzia. The scapes were selected, labeled and there were zero problems concerning mechanical damage, disease and/or plagues. Subsequently this period, the scapes were moved randomly to recipients with water, in which two postharvest trials were conducted. In experiment 1, the flower scapes were placed in buckets with water from public supply and sanitation department and taken to a cold room at temperature of 7.5 degrees C and RH of 90%, for a twelve day period. For the experiment 2, were kept under the same conditions but at room temperature for a period of six days. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. In both experiments, the visual analysis: color, gloss, stains (by assigning notes), opening and drop florets (count) were evaluated at intervals of four days in cold and every 48 hours at ambient temperature conditions. The sepal is the organ that showed greater loss in coloration. The variable gloss showed the same pattern for the two experiments. Incidences of stains on the inflorescences occurred in patches at room temperature. The scapes increased number of florets open in cold. This tendency did not occur at room temperature. No were observed differences in the fall of florets. Conclude that the storage temperature does not contribute to postharvest quality of strelitzia.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of the present study was to investigate the abrasive effect of CaCO3 and SiO2-based fluoride-free experimental toothpastes on eroded human permanent dental enamel and evaluate the effectiveness of waiting periods between acid exposure and tooth brushing. Twelve volunteers wore palatal appliances containing human enamel blocks for two periods of five days each. The appliances were immersed in a soft drink for five minutes four times a day (9:00 am, 11:00 am, 2:00 pm and 4:00 pm). On two occasions, two blocks were not submitted to additional treatment; two blocks were brushed (30 s) either with a CaCO3 or SiO2 toothpaste immediately after erosion and two blocks were brushed 1 h after erosion. Thus, the sample was divided into six groups: erosion alone (CaCO3 and SiO2 control); brushing with fluoride- free toothpaste (CaCO3 immediate and 1 h after erosion; SiO2 immediate and 1 h after erosion). Significant differences in wear depth were found between the enamel blocks in the CaCO3 immediate and 1 h after erosion groups and the blocks in the CaCO3 control group (p=0.001; p=0.022). No significant differences were found regarding the change in roughness and wear depth between blocks submitted to immediate abrasion and 1 h after erosion (CaCO3 and SiO2). The data revealed that surface roughness and wear depth is increased when erosion is combined with dental abrasion, regardless of the abrasive used. Waiting for 1 h to brush the eroded blocks offered no protective effect.