843 resultados para Defect introduction and removal process


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study is to investigate value added service concept for an asset and real estate management case company. The initial purpose was to recognize the most value adding key performance indicators (KPIs) information delivered for its customers, real estate investors with value added service. The multiple case study strategy included two focus group interviews with five case interviews in total. Additionally, quality function deployment (QFD) was used in order to form up the service process. The study starts with introduction and methodology explaining the demand for the thesis study. The subsequent chapter presents the theoretical background on real estate management KPIs in four main points of views and quality function deployment from the service development point of view. The chapter also defines research gap for the case study. According to the case study interviews, the most favored KPIs to deliver for the clients are income maturity of lease agreements and leasing activity. These KPIs and quality characteristics are translated into the QFD. In total, the service QFD explains the service planning, process control, and action plan phases.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Brett Duane Improving oral healthcare in Scotland with special reference to sustainability and caries prevention University of Turku, Faculty of Medicine, Institute of Dentistry, Community Dentistry, Finnish Doctoral Program in Oral Sciences (FINDOS-Turku), Turku, Finland Annales Universitatis Turkuensis, Sarja- Ser. D, Medica-Odontologica. Painosalama Oy, Turku, Finland, 2015. Dentistry must provide sustainable, evidence-based, and prevention-focused care. In Scotland oral health prevention is delivered through the Childsmile programme, with an increasing use of high concentration fluoride toothpaste (HCFT). Compared with other countries there is little knowledge of xylitol prevention. The UK government has set strict carbon emission limits with which all national health services (NHS) must comply. The purpose of these studies was firstly to describe the Scottish national oral health prevention programme Childsmile (CS), to determine if the additional maternal use of xylitol (CS+X) was more effective at affecting the early colonisation of mutans streptococci (MS) than this programme alone; secondly to analyse trends in the prescribing and management of HCFT by dentists; and thirdly to analyse data from a dental service in order to improve its sustainability. In all, 182 mother/child pairs were selected on the basis of high maternal MS levels. Motherswere randomly allocated to a CS or CS+X group, with both groups receiving Childsmile. Theintervention group consumed xylitol three times a day, from when the child was 3 months until 24 months. Children were examined at age two to assess MS levels. In order to understand patterns of HCFT prescribing, a retrospective secondary data analysis of routine prescribing data for the years 2006-2012 was performed. To understand the sustainability of dental services, carbon accounting combined a top-down approach and a process analysis approach, followed by the use of Pollard’s decision model (used in other healthcare areas) to analyse and support sustainable service reconfiguration. Of the CS children, 17% were colonised with MS, compared with 5% of the CS+X group. This difference was not statistically significant (P=0.1744). The cost of HCFT prescribing increased fourteen-fold over five years, with 4% of dentists prescribing 70% of the total product. Travel (45%), procurement (36%) and building energy (18%) all contributed to the 1800 tonnes of carbon emissions produced by the service, around 4% of total NHS emissions. Using the analytical model, clinic utilisation rates improved by 56% and patient travel halved significantly reducing carbon emissions. It can be concluded that the Childsmile programme was effective in reducing the risk for MS transmission. HCFT is increasing in Scotland and needs to be managed. Dentistry has similar carbon emissions proportionally as the overall NHS, and the use of an analytic tool can be useful in helping identify these emissions. Key words: Sustainability, carbon emissions, xylitol, mutans streptococci, fluoride toothpaste, caries prevention.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to evaluate the carcass suspension method concerning quality of sheep meat. Ten discard ewes were used, with approximately 62 kg of body weight. After slaughtering, flaying, evisceration and removal of head and paws, carcasses were longitudinally divided into two parts. Alternated sides of half carcasses were hanged by the tendon of the gastrocnemius (Treatment 1 - T1) and by the pelvic bone (Treatment 2 - T2) in cold store for a 24-hour period. Subsequently, the Semimembranosus muscle was removed from all half carcasses for meat quality analyses. The Semimembranosus muscles from the carcasses hanged by the pelvis suspension method presented higher softness than the same muscles from the carcasses hanged by the tendon of the gastrocnemius, with values of 1.99 kgf.cm-2 and 3.15 kgf.cm-2, respectively. Treatment 2 presented lower meat cooking losses than Treatment 1, with average values of 32.14 and 33.44%, respectively. The remaining meat quality parameters evaluated were not influenced by the carcass suspension method. We concluded that the carcass suspension method influenced meat softness and losses by cooking, with better results for carcasses hanged by the pelvic bone.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A cassava-based puffed snack was produced using a single screw extruder to determine the effect of the raw material composition (cassava leaf flour and moisture) and the process parameters (extrusion temperature and screw speed) on the physical characteristics of an extruded-expanded snack. A central composite rotational design, including four factors with 30 treatments, was used with the following as dependent variables: expansion index, specific volume, water solubility index, water absorption index, color (L*, a*, b*), and hardness. Under conditions of low moisture content (12 to 14%), low percentage of cassava leaf flour (2 to 4%), and intermediate conditions of extrusion temperature (100°C) and screw speed (230rpm), it was possible to obtain puffed snack products with desirable characteristics.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

AbstractPurple sweet potato (PSP) can provide products with attractive color besides nutritious benefits in food processing. So, the compositions and color stability of an aqueous anthocyanin-based PSP extract were investigated in order to promote its wide use in food industry. PSP anthocyanins were extracted with water, and nine individual anthocyanins (48.72 ug mL–1 in total, 24.36 mg/100 g fresh PSP in yield) were found by HPLC analysis. The PSP extract also contained 17.11 mg mL–1 of protein, 0.44 mg mL–1 of dietary fiber, 2.82 mg mL–1 of reducing sugars, 4.02 ug mL–1 of Se, 54.21 ug mL–1 of Ca and 60.83 ug mL–1 of Mg. Changes in color and stability of the PSP extract, as affected by pH, heat, light and extraction process, were further evaluated. Results indicated that PSP anthocyanins had good stability at pH 2.0-6.0, while the color of PSP extract kept stable during 30 days of storage at 20 °C in dark. Both UV and fluorescent exposure weakened the color stability of PSP extract and UV showed a more drastic effect in comparison. A steaming pretreatment of fresh PSP is beneficial to the color stability.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tämän Pro Gradu-tutkielman tavoite on tutkia Business Process Re-engineering menetelmiä myyntiprosessien tehostamisessa. Tutkimuksen teoreettinen viiteke-hys rakentuu myynninjohtamisen, myyntiprosessien ja Business Process Mana-gementin ja Business Process Re-enineeringin ympärille. IT-järjestelmät ovat myös oleellinen osa-alue tutkimuksen kannalta ja niiden osuutta kuvataan niin myyntiprosesseissa kuin Business Process Re-engineering -menetelmien yhtey-dessä. Tutkielmassa perehdytään aikaisempaan tutkimusmateriaaliin ja akateemiseen kirjallisuuteen yllämainituilla osa-alueilla. Tavoitteena on löytää aikaisempia tutki-muksia myyntiprosessien tehostamisesta ja BPR:n roolista näissä tapauksissa. Myös myynninjohtamisen vaikutusta tehokkaaseen myyntiprosessiin tutkitaan, kuten myös IT-järjestelmien erilaisia rooleja tehokkaissa myyntiprosesseissa. Tutkielman empiirinen osio on kvalitatiivinen Case-tutkimus eräässä rahoitusalan yrityksessä. Tutkimus tehdään haastattelemalla myyntihenkilöstöä ja esimiehiä. Lisäksi analysoidaan yrityksen myyntiprosessiin liittyvää muuta materiaalia. Case-tutkimuksen tuloksia peilataan aiempaan akateemiseen tutkimukseen ja tuloksista pyritään löytämään ratkaisuja, miten BPR -menetelmillä voidaan tehostaa yrityksen myyntiprosessia.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The general aim of the thesis was to study university students’ learning from the perspective of regulation of learning and text processing. The data were collected from the two academic disciplines of medical and teacher education, which share the features of highly scheduled study, a multidisciplinary character, a complex relationship between theory and practice and a professional nature. Contemporary information society poses new challenges for learning, as it is not possible to learn all the information needed in a profession during a study programme. Therefore, it is increasingly important to learn how to think and learn independently, how to recognise gaps in and update one’s knowledge and how to deal with the huge amount of constantly changing information. In other words, it is critical to regulate one’s learning and to process text effectively. The thesis comprises five sub-studies that employed cross-sectional, longitudinal and experimental designs and multiple methods, from surveys to eye tracking. Study I examined the connections between students’ study orientations and the ways they regulate their learning. In total, 410 second-, fourth- and sixth-year medical students from two Finnish medical schools participated in the study by completing a questionnaire measuring both general study orientations and regulation strategies. The students were generally deeply oriented towards their studies. However, they regulated their studying externally. Several interesting and theoretically reasonable connections between the variables were found. For instance, self-regulation was positively correlated with deep orientation and achievement orientation and was negatively correlated with non-commitment. However, external regulation was likewise positively correlated with deep orientation and achievement orientation but also with surface orientation and systematic orientation. It is argued that external regulation might function as an effective coping strategy in the cognitively loaded medical curriculum. Study II focused on medical students’ regulation of learning and their conceptions of the learning environment in an innovative medical course where traditional lectures were combined wth problem-based learning (PBL) group work. First-year medical and dental students (N = 153) completed a questionnaire assessing their regulation strategies of learning and views about the PBL group work. The results indicated that external regulation and self-regulation of the learning content were the most typical regulation strategies among the participants. In line with previous studies, self-regulation wasconnected with study success. Strictly organised PBL sessions were not considered as useful as lectures, although the students’ views of the teacher/tutor and the group were mainly positive. Therefore, developers of teaching methods are challenged to think of new solutions that facilitate reflection of one’s learning and that improve the development of self-regulation. In Study III, a person-centred approach to studying regulation strategies was employed, in contrast to the traditional variable-centred approach used in Study I and Study II. The aim of Study III was to identify different regulation strategy profiles among medical students (N = 162) across time and to examine to what extent these profiles predict study success in preclinical studies. Four regulation strategy profiles were identified, and connections with study success were found. Students with the lowest self-regulation and with an increasing lack of regulation performed worse than the other groups. As the person-centred approach enables us to individualise students with diverse regulation patterns, it could be used in supporting student learning and in facilitating the early diagnosis of learning difficulties. In Study IV, 91 student teachers participated in a pre-test/post-test design where they answered open-ended questions about a complex science concept both before and after reading either a traditional, expository science text or a refutational text that prompted the reader to change his/her beliefs according to scientific beliefs about the phenomenon. The student teachers completed a questionnaire concerning their regulation and processing strategies. The results showed that the students’ understanding improved after text reading intervention and that refutational text promoted understanding better than the traditional text. Additionally, regulation and processing strategies were found to be connected with understanding the science phenomenon. A weak trend showed that weaker learners would benefit more from the refutational text. It seems that learners with effective learning strategies are able to pick out the relevant content regardless of the text type, whereas weaker learners might benefit from refutational parts that contrast the most typical misconceptions with scientific views. The purpose of Study V was to use eye tracking to determine how third-year medical studets (n = 39) and internal medicine residents (n = 13) read and solve patient case texts. The results revealed differences between medical students and residents in processing patient case texts; compared to the students, the residents were more accurate in their diagnoses and processed the texts significantly faster and with a lower number of fixations. Different reading patterns were also found. The observed differences between medical students and residents in processing patient case texts could be used in medical education to model expert reasoning and to teach how a good medical text should be constructed. The main findings of the thesis indicate that even among very selected student populations, such as high-achieving medical students or student teachers, there seems to be a lot of variation in regulation strategies of learning and text processing. As these learning strategies are related to successful studying, students enter educational programmes with rather different chances of managing and achieving success. Further, the ways of engaging in learning seldom centre on a single strategy or approach; rather, students seem to combine several strategies to a certain degree. Sometimes, it can be a matter of perspective of which way of learning can be considered best; therefore, the reality of studying in higher education is often more complicated than the simplistic view of self-regulation as a good quality and external regulation as a harmful quality. The beginning of university studies may be stressful for many, as the gap between high school and university studies is huge and those strategies that were adequate during high school might not work as well in higher education. Therefore, it is important to map students’ learning strategies and to encourage them to engage in using high-quality learning strategies from the beginning. Instead of separate courses on learning skills, the integration of these skills into course contents should be considered. Furthermore, learning complex scientific phenomena could be facilitated by paying attention to high-quality learning materials and texts and other support from the learning environment also in the university. Eye tracking seems to have great potential in evaluating performance and growing diagnostic expertise in text processing, although more research using texts as stimulus is needed. Both medical and teacher education programmes and the professions themselves are challenging in terms of their multidisciplinary nature and increasing amounts of information and therefore require good lifelong learning skills during the study period and later in work life.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

There exist several researches and applications about laser welding monitoring and parameter control but not a single one have been created for controlling of laser scribing processes. Laser scribing is considered to be very fast and accurate process and thus it would be necessary to develop accurate turning and monitoring system for such a process. This research focuses on finding out whether it would be possible to develop real-time adaptive control for ultra-fast laser scribing processes utilizing spectrometer online monitoring. The thesis accurately presents how control code for laser parameter tuning is developed using National Instrument's LabVIEW and how spectrometer is being utilized in online monitoring. Results are based on behavior of the control code and accuracy of the spectrometer monitoring when scribing different steel materials. Finally control code success is being evaluated and possible development ideas for future are presented.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The addition of the Charter of Rights and Freedoms represented a fundamental shift in Canadian governance. Many saw the tabling of such a document as a further, even fmal, step towards the Americanization of the Canadian polity. While the Charter's presence has significantly altered the relationship between citizens, government and the courts, it has done so by maintaining the traditional values and experiences that has been the hallmarks of Canadian constitutionalism. This is in contrast to the fears harboured by critics suggesting that the Charter was a further Americanization of the Canadian Polity, notwithstanding the very different natures of the American Bill of Rights and the Canadian Charter. Analyzing American Supreme Court precedent use by the Canadian Supreme Court has demonstrated that such an Americanization has not, in fact, occurred. In the present analysis of American precedent use in section 1 limitation of rights cases, the citation of these precedents are at best episodic, at least on the quantitative level. Qualitatively, the Canadian Supreme Court generally uses American jurisprudence to further support broad definitions of 'great rights' . As for the more intricate details of rights limitations and the process involved in detennining how Charter rights are limited, one would be hard pressed to find even cursory references to American case law.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nietzsche employed metaphors frequently throughout his works. This is especially true in Thus Spoke Zarathustra. Although this is often aesthetically pleasing, it can be very difficult for the reader to understand the nuances and interconnections with the various metaphors. This is generally considered one of the main drawbacks of Thus Spoke Zarathustra. While it is beautifully written in a style that is incomparable today, much of what it is attempting to communicate is lost on the reader. This thesis explores the connection between the metamorphoses of the spirit and the seasons in Thus'Spoke Zarathustra, with the camel spirit corresponding to autumn, the lion spirit with winter, the child spirit with spring, and finally the Overman with summer. Although the Overman is not included among the three metamorphoses of the spirit, it will be argued that the Overman is a separate metamorphosis and must not be conflated with the child spirit despite their similarities. While Thus Spoke Zarathustra will be the primary text used, Nietzsche's other works will be employed to demonstrate that this connection between the metamorphoses of the spirit and the seasons runs through much of his thought. By demonstrating how the seasons are used in Thus Spoke Zarathustra, a deeper understanding of the work will be revealed. Further, this thesis will demonstrate that it is an intentional connection, and not merely coincidental or something that has been constructed and imposed upon the work. Bringing this correspondence between the metamorphoses of the spirit and the seasons to light will result in the need to rethink particular notions of Nietzsche's philosophy. The most apparent involves the Overman and the process of overcoming. Although the Overman has often been viewed as "the end" in the cycle of metamorphoses, it will be argued that this is not the case. The typical interpretation of the metamorphoses of the spirit regard it as a linear progression; however, it will be shown that the metamorphoses of the spirit is cyclical with the camel, lion, and child spirits endlessly repeating, much like the seasons.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose ofthis study was to explore the process oftherapeutic riding as an experiential and holistic approach to learning and recovery for people with disabilities as perceived by the providers oftherapeutic riding. To enhance the connection between theory and practice and to suggest future research, the researcher endeavoured to develop a theory that contributed to the knowledge base oftherapeutic riding, animal-assisted therapy and education, experiential education, and experiential therapy in addition to contributing to connections among them. This topic was investigated because ofthe lack ofresearch about the process of therapeutic riding, particularly from learning and a recovery perspective. Few studies have addressed how therapeutic riding outcomes are achieved or how the therapeutic riding process actually works. This study was identified as grounded theory using qualitative data through interviews and narrative reflections with therapeutic riding providers, a researcher's journal, field notes, and written documents. Grounded theory analysis was used to analyze the qualitative data. This consisted ofdoing open, axial, and selective coding. This study provided detailed descriptions ofthe research approach, researcher's involvement, participant and site selection, data collection and analysis, methodological assumptions and limitations, credibility established, and ethical considerations. The findings ofthe data analysis revealed the theme ofrelationships as central to the learning and recovery process oftherapeutic riding for people with disabilities. The significance ofthe team relationships, the horse and rider relationship, and the providers and rider relationship was found. The essential components ofthe learning and recovery process were presented in a diagram in the selective coding phase. Goals oftherapeutic riding included psycho-education; behavioural and social; physical; and equestrian. Parts ofthe process ofhow outcomes were achieved included motivation; "opens new doors;" risk; task analysis; control; communication; and environmental factors. Outcomes of therapeutic riding included independence and mobility; confidence; and transfer abilities or skills. The implications ofthese findings for theory, practice, and further research were also. explored.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis examined the role transition from an elementary teacher to an elementary principal. In particular, the training and socialization process of becoming an elementary principal was explored through the study of the hierarchical and political structure of a southern Ontario school board, and how this influenced the learning experiences of new elementary principals. A qualitative methodology, with a grounded theory design, was employed to investigate this process through interviews with 10 participants to examine their experiences and role learning occurs during their development. Specifically, participants perspective shifts, developmental experiences, understanding of group culture, and expansion of a board profile were highlighted in the data. One of the compelling results of the study was the degree to which principals of aspiring administrators influence the socialization of their subordinates. The beliefs and practices of the school principal determine the socialization orientation that teachers and vice-principals will experience during role learning. The results of this study also imply that role orientation needs to be understood as a continuum between custodial and innovative role assumption. Varying degrees of custodianship or innovation depended on the context of the administrative placement and the personal attributes of administrative candidates. Principals who are willing to share responsibilities, who are good communicators, and who wish to develop a collaborative relationship with their viceprincipals are the individuals the participants in this study described as making the best mentors.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Résumé Depuis le début des années 1990, la recherche sur le développement régional a pris une importance considérable dans les disciplines de l’économie et de la géographie dans la plupart des pays. De nombreuses études ont été consacrées à ce sujet et l’on constate une approche analytique de plus en plus sophistiquée. Que les économies pauvres ont tendance à converger vers les pays riches, ou bien à diverger au fil du temps est une question qui a attiré l'attention des décideurs et des universitaires depuis quelques décennies. Convergence ou de divergence économique est un sujet d'intérêt et de débat, non seulement pour valider ou non les deux modèles principaux de croissance qui sont considérés comme concurrent (l’approche néo-classique et celle des approches de croissance endogène), mais aussi pour ses implications pour les publiques politiques. En se basant sur une analyse des politiques de développement régional et des analyses statistiques de la convergence et des disparités régionales, les objectifs de cette thèse sont de tenter de fournir une explication des différents processus et des modèles de développement économique régional poursuivis dans le cas de territoires immenses en utilisant le Canada et la Chine comme études de cas, d'entreprendre une analyse des différents facteurs et des forces motrices qui sous-tendent le développement régional dans ces deux pays, et d'explorer à la fois les réussites et les échecs apparents dans les politiques de développement régional en comparant et contrastant les expériences de développement régional et les modèles de ces deux pays. A fin d'atteindre cet objectif, la recherche utilise une approche multi-scalaire et des méthodes de mesure multidimensionnelle dans le cadre des analyses sur les disparités « régionales » entre les macro régions (sous-ensembles de provinces) des deux pays, des provinces et des régions urbaines sélectionnées, dans le but ultime d’identifier des problèmes existants en termes de développement régional et de pouvoir proposer des solutions. Les étapes principales de la recherche sont : 1. La cueillette des données statistiques pour le Canada et la Chine (incluant les provinces de Québec et de Xinjiang) pour une gamme d’indicateurs (voir ci-dessous). 2. D’entreprendre une analyse de chaque dimension dans les deux juridictions: Population (p.ex. composition, structure, changement); Ressources (p. ex. utilisation, exploitation de l’énergie); Environnement (p.ex. la pollution); et le Développement socioéconomique (p.ex. le développement et la transformation des secteurs clé, et les modèles de développement rural et urbain), et les disparités changeantes par rapport à ces dimensions. 3. La définition d’une typologie de différents types de région en fonction de leurs trajectoires de développement, ce qui servira pour critiquer l’hypothèse centre-périphérie. 4. Le choix d’une région métropolitaine dans chaque juridiction (province). 5. D’entreprendre une analyse temporelle des événements clé (politiques, investissements) dans chaque région et les facteurs impliqués dans chaque événement, en utilisant l’information documentaire générale et des agences institutionnelles impliqués actuellement et dans un passée récent. Cette étude a tenté d'expliquer les schémas et les processus des deux économies, ainsi que la présentation d'études de cas qui illustrent et examinent les différences dans les deux économies à partir de l’échelle nationale jusqu’au niveau régional et provincial et aussi pour certaines zones urbaines. Cette étude a essayé de répondre aux questions de recherche comme: Est-il vrai que les pays avec des plus grandes territoires sont associés avec des plus grandes disparités interrégionales? Quel est le résultat des comparaisons entre pays développés et pays en développement? Quels sont les facteurs les plus importants dans le développement économique de vastes territoires dans les pays développés et pays en développement? Quel est le mécanisme de convergence et de divergence dans les pays développés et, respectivement, les pays en développement? Dans l'introduction à la thèse, le cadre général de l'étude est présenté, suivie dans le chapitre 1 d'une discussion sur les théories et les concepts utilisés dans la littérature théorique principale qui est pertinent à l'étude. Le chapitre 2 décrit la méthodologie de recherche. Le chapitre 3 présente une vue d'ensemble des politiques de développement économique régional et les programmes du Canada et de la Chine dans des périodes différentes à différentes échelles. Au chapitre 4, la convergence des deux pays à l'échelle nationale et la convergence provinciale pour chaque pays sont examinés en utilisant différentes méthodes de mesure telles que les méthodes traditionnelles, la convergence bêta et la convergence sigma. Dans le chapitre le plus complexe, le chapitre 5, les analyses comparatives sont présentées à l'aide de données statistiques, à partir des analyses des cas régionaux et provinciaux retenus des deux pays. Au chapitre 6, ces dispositions sont complétées par une analyse des régions urbaines choisies, qui permet également des aperçus sur les régions les plus périphériques. Dans la recherche proposée pour cette thèse, la politique, la population, le revenu, l'emploi, la composition industrielle, l'investissement, le commerce et le facteur de la migration sont également pris en compte comme facteurs importants de l'analyse régionale compte tenu de la superficie du territoire des deux pays et les différences de population entre eux. Cette thèse a évalué dans quelle mesure les politiques gouvernementales ont réussi à induire la convergence régionale ou ont encore ont creusé davantage les disparités régionales, ce qui implique nécessairement une évaluation de la durabilité des patrons et des programmes de développement régional. Cette étude a également mis l'accent sur les disparités régionales et la politique de développement régional, les comparaisons entre pays, pour mesurer la convergence entre les pays et entre les régions, y compris l'analyse spatiale, d'identifier les facteurs les plus actifs tels que la population, les ressources, la politique, l'urbanisation, les migrations, l'ouverture économique et leurs différents rôles dans le développement économique de ces grands territoires (au Canada et Chine). Les résultats empiriques et les processus de convergence et de divergence offrent un cadre intéressant pour l'examen de la trajectoire de développement régionales et les disparités régionales dans les deux économies. L'approche adoptée a révélé les différentes mosaïques complexes du développement régional dans les deux pays. Les résultats de cette étude ont démontré que la disparité en termes de revenu régional est une réalité dans chaque zone géographique, et que les causes sont nombreuses et complexes. Les deux économies ont certains parallèles dans la mise en œuvre des politiques de développement économique régional, mais il existe des différences importantes aussi et elles se sont développées à différentes vitesses. Les deux économies se sont développées depuis la Seconde Guerre mondiale, mais la Chine a connu une croissance rapide que le Canada comme témoignent de nombreux indicateurs depuis 1980. Cependant, la Chine est maintenant confrontée à un certain nombre de problèmes économiques et sociaux, y compris les disparités régionales marquées, un fossé toujours croissant entre les revenus ruraux et urbains, une population vieillissante, le chômage, la pauvreté et la dégradation rapide de l'environnement avec toujours plus de demandes en énergie. Le développement économique régional en Chine est plus déséquilibré. Le Canada accuse un degré de disparités régionales et provinciales moins important que la Chine. Dans les cas provinciaux, il existe d'importantes différences et de disparités dans la structure économique et spatiale du Québec et du Xinjiang. Les disparités infra provinciales sont plus grandes que celles à l’échelle des provinces et des grandes régions (des sous-ensembles de provinces). Les mécanismes de convergence et de divergence dans les deux pays sont différents. Les résultats empiriques et les processus de convergence et de divergence offrent un cadre intéressant pour l'examen de la trajectoire de développement régionale et les disparités régionales dans les deux économies. Cette étude démontre également que l'urbanisation (les métropoles et les villes) s’avère être le facteur le plus actif et contribue à l'économie régionale dans ces grands territoires. L'ouverture a joué un rôle important dans les économies des deux pays. La migration est un facteur majeur dans la stimulation de l'économie des deux pays mais de façons différentes. Les résultats empiriques démontrent que les disparités régionales ne peuvent pas être évitées et elles existent presque partout. Il n'y a pas une formule universelle et de politiques spécifiques sont de mise pour chaque région. Mais il semble possible pour les décideurs politiques nationaux et régionaux d’essayer de maintenir l'écart à une échelle raisonnable pour éviter l'instabilité sociale.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nous proposons une approche basée sur la formulation interactive des requêtes. Notre approche sert à faciliter des tâches d’analyse et de compréhension du code source. Dans cette approche, l’analyste utilise un ensemble de filtres de base (linguistique, structurel, quantitatif, et filtre d’interactivité) pour définir des requêtes complexes. Ces requêtes sont construites à l’aide d’un processus interactif et itératif, où des filtres de base sont choisis et exécutés, et leurs résultats sont visualisés, changés et combinés en utilisant des opérateurs prédéfinis. Nous avons évalués notre approche par l’implantation des récentes contributions en détection de défauts de conception ainsi que la localisation de fonctionnalités dans le code. Nos résultats montrent que, en plus d’être générique, notre approche aide à la mise en œuvre des solutions existantes implémentées par des outils automatiques.