Excimer-laser irradiated polyimide films as temperature-sensitive materials

The temperature dependence of the resistivity of KrF laser irradiated polyimide films was studied. In all cases, the resistivity decreased with increasing temperature. The irradiated polyimide film exhibited a typical semiconducting property. This result indicated that the irradiated polyimide films can be used as temperature-sensitive materials. We demonstrated that both the sensitivity and the sensitive temperature range of the irradiated polyimide films can be altered by adjusting laser irradiation parameters. The intrinsic relationship between the temperature coefficient of the resistivity and irradiation condition was interpreted in terms of the microstructural change. The result provided a new insight into the fundamental aspects of laser irradiated polyimide film structure and a method of preparing temperature-sensitive materials. (C) 2000 Elsevier Science B.V. All rights reserved.

Addition reactions of nitrones on the reconstructed C(100)-2 x 1 surfaces

In this paper, the reactions of nitrone, N-methyl nitrone, N-phenyl nitrone and their hydroxylamine tautomers (vinyl-hydroxylamine, N-methyl-vinyl-hydroxylamine and N-phenyl-vinyl-hydroxylamine) on the reconstructed C(100)-2 x 1 surface have been investigated using hybrid density functional theory (B3LYP), Moller-Plesset second-order perturbation (MP2) and multi-configuration complete-active-space self-consistent-field (CASSCF) methods. The calculations showed that all the nitrones can react with the surface "dimer" via facile 1.3-dipolar cycloaddition with small activation barriers (less than 12.0 kJ/mol at B3LYP/6-31g(d) level). The [2+2] cycloaddition of hydroxylamine tautomers on the C(100) surface follows a diradical mechanism. Hydroxylamine tautomers first form diradical intermediates with the reconstructed C(I 00)-2 x I surface by overcoming a large activation barrier of 50-60 kJ/mol (B3LYP), then generate [2+2] cycloaddition products via diradical transition states with negligible activation barriers. The surface reactions result in hydroxyl or amino-terminated diamond surfaces, which offers new opportunity for further modifications. (C) 2007 Elsevier B.V. All rights reserved.

松辽盆地南部腰英台区块低渗透储层整体压裂改造技术研究

The Yaoyingtai Block is located within the northeastern Changling Depression of southern Songliao Basin, where the reservoir sandstones are petrophysically characterized by very low permeability, which results in the low success probability of artificial fracturing, and the low oil yield by water injection in the course of oil production. In order to improve the situations as stated above, this research aims to work out an integral fracturing technology and strategy applicable to the low permeable reservoirs in Yaoyingtai Block. Under the guidance of geological theory, reservoir engineering and technology, the subsurface occurrences of natural and hydraulic fractures in the reservoirs are expected to be delineated, and appropriate fracturing fluids and proppants are to be optimized, based on the data of drilling, well logging, laboratory and field experiments, and geological data. These approaches lay the basis of the integral fracturing technology suitable for the low permeable reservoir in the study area. Based on core sample test, in-situ stress analysis of well logging, and forward and inversion stress field modeling, as well as fluid dynamic analysis, the maximum in-situ stress field is unraveled to be extended nearly along the E-W direction (clustering along N85-135°E) as is demonstrated by the E-W trending tensional fractures. Hydraulic fractures are distributed approximately along the E-W direction as well. Faulting activities could have exerted obvious influences on the distribution of fractures, which were preferentially developed along fault zones. Based on reservoir sensitivity analysis, integrated with studies on rock mechanics, in-situ stress, natural fracture distribution and production in injection-production pilot area, the influences of primary fractures on fracturing operation are analyzed, and a diagnostic technology for primary fractures during depressurization is accordingly developed. An appropriate fracturing fluid (hydroxypropyl guar gum) and a proppant (Yixing ceramsite, with a moderate-density, 0.45-0.9mm in size) applicable to Qingshankou Formation reservoir are worked out through extensive optimization analysis. The fracturing fluid can decrease the damage to the oil reservoir, and the friction in fracturing operation, improving the effect of fracturing operation. Some problems, such as sand-out at early stage and low success rate of fracturing operations, have been effectively solved, through pre-fracturing formation evaluation, “suspension plug” fracturing, real-time monitoring and limited-flow fracturing. Through analysis of fracture-bearing tight reservoir with variable densities and dynamic analysis of influences of well patterns on fracturing by using numerical simulation, a fracturing operation scheme for the Qingshankou Formation reservoir is proposed here as being better to compress the short factures, rather than to compress the long fractures during hydraulic fracturing. It is suggested to adopt the 450m×150m inverted 9-spot well pattern in a diamond shape with wells placed parallel to fractures and a half fracture length of 60-75m.

Caratterizzazione proteomica di fluidi e tessuti in diverse condizioni fisio-patologiche

This thesis has been focused on the proteomic characterization of human saliva from donors of different ages, starting from birth up to adult age, and pediatric brain tumor tissues. The first study has been performed in order to compare the acid-insoluble fraction of saliva from preterm with at-term newborns and adults and establish if differences exist. In the second study medulloblastoma and pilocytic astrocytoma pediatric brain tumor extracts have been compared. In both studies 2- DE analysis was coupled with high resolution tandem mass spectrometry (MS/MS). The proteomic characterization of the acid-insoluble fractions of saliva from preterm newborns allowed to integrate data previously obtained on the acid-soluble fraction by HPLC-electrospray ionization (ESI)-mass spectrometry (MS), and to evidence several differences between preterm newborns, at-term newborns and adults. Spots differentially expressed between the three groups, according to image analysis of the gels, were submitted to in-gel tryptic digestion and the peptide mixture analyzed by high performance HPLC-ESI-MS/MS for their characterization. By this strategy, we identified three over-expressed proteins in atterm newborns with respect to preterm newborns and adults (BPI fold-containing family A member 1, two proteoforms of annexin A1, and keratin type 1 cytoskeletal 13), and several over-expressed proteins in adults (fatty acid-binding protein, S100A6, S100A7, two proteoforms of S100A9, several proteoforms of prolactin-inducible protein, Ig kappa chain, two proteoforms of cystatin SN, one proteoform of cystatin S and several proteoforms of α-amylase 1). Moreover, for the first time, it was possible to assign by MS/MS four spots of human saliva 2-DE, already detected by other authors, to different proteoforms of S100A9. The strategy applied used a sequential staining protocol to the 2-DE gels, first with Pro-Q Diamond, that allows specific detection of phosphoproteins, and successively with total protein SYPRO Ruby stain. In the second study, proteomic analysis of two pediatric brain tumor tissues pointed out differences between medulloblastoma, the prevalent malignant tumor in childhood, and pilocytic astrocytoma, the most common, that only rarely shows a malignant progression. Due to the limited availability of bioptic tissue, the study was performed on pooled tumor tissues, and was focused on acid-insoluble fraction to integrate the characterization performed by a group of colleagues in Rome on the acid-soluble fraction by high performance HPLC-ESI-MS/MS. The results indicated that the two tumors exhibit different proteomic profiles and evidenced interesting differential expression of several proteins. Among them, peroxiredoxin- 1, peptidyl-prolyl cis–trans isomerase A, heterogeneous nuclear ribonucleoproteins A2/B1, mitochondrial isoform of malate dehydrogenase, nucleoside diphosphate kinase A, glutathione S-transferase P and fructose bisphosphate aldolase A resulted significantly over-expressed in medulloblastoma while glial fibrillary acidic protein, serotransferrin, α crystallin B chain, ferritin light chain, annexin A5, fatty acid-binding protein (brain), sorcin and apolipoprotein A-I resulted significantly over-expressed in pilocytic astrocytoma. In conclusion, the work done allowed to evidence the usefulness of using an integrated bottom-up/top-down approach, based on 2-DE-MS analysis and high performance MS in order to obtain a complete characterization of the proteome under investigation, revealing and identifying, not only peptides and small proteins, but also proteins with higher MW, that often it is not possible to identify by using exclusively a top-down ESI-MS approach.

Pressure-induced amorphization and an amorphous-amorphous transition in densified porous silicon

Deb, S. K., Wilding, M. C., Somayazulu, M., McMillan, P. F. (2001). Pressure-induced amorphization and an amorphous-amorphous transition in densified porous silicon. Nature, 414, 528-530. RAE2008

A fully integrated multi-channel detector for electron spectroscopy

Langstaff, David; Bushell, A.; Chase, T.; Evans, D.A., (2005) 'A fully integrated multi-channel detector for electron spectroscopy', Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 238 pp.219-223 RAE2008 Synchrotron Radiation in Materials Science ? Proceedings of the 4th Conference on Synchrotron Radiation in Materials Science 4th Conference on Synchrotron Radiation in Materials Science

Restauração directa de classes II em pré-molares com compósitos

Tese de Doutoramento apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Doutor em em Biotecnologia e Saúde, Epidemiologia e Saúde Pública.

Microneedle platform for continuous monitoring of biomarkers in interstitial fluid

Science Foundation Ireland (CSET - Centre for Science, Engineering and Technology, Grant No. 07/CE/11147)

Development of low-cost sensing and separation devices based on macro, micro and nano technology for health applications

The work presented in this thesis described the development of low-cost sensing and separation devices with electrochemical detections for health applications. This research employs macro, micro and nano technology. The first sensing device developed was a tonerbased micro-device. The initial development of microfluidic devices was based on glass or quartz devices that are often expensive to fabricate; however, the introduction of new types of materials, such as plastics, offered a new way for fast prototyping and the development of disposable devices. One such microfluidic device is based on the lamination of laser-printed polyester films using a computer, printer and laminator. The resulting toner-based microchips demonstrated a potential viability for chemical assays, coupled with several detection methods, particularly Chip-Electrophoresis-Chemiluminescence (CE-CL) detection which has never been reported in the literature. Following on from the toner-based microchip, a three-electrode micro-configuration was developed on acetate substrate. This is the first time that a micro-electrode configuration made from gold; silver and platinum have been fabricated onto acetate by means of patterning and deposition techniques using the central fabrication facilities in Tyndall National Institute. These electrodes have been designed to facilitate the integration of a 3- electrode configuration as part of the fabrication process. Since the electrodes are on acetate the dicing step can automatically be eliminated. The stability of these sensors has been investigated using electrochemical techniques with excellent outcomes. Following on from the generalised testing of the electrodes these sensors were then coupled with capillary electrophoresis. The final sensing devices were on a macro scale and involved the modifications of screenprinted electrodes. Screen-printed electrodes (SPE) are generally seen to be far less sensitive than the more expensive electrodes including the gold, boron-doped diamond and glassy carbon electrodes. To enhance the sensitivity of these electrodes they were treated with metal nano-particles, gold and palladium. Following on from this, another modification was introduced. The carbonaceous material carbon monolith was drop-cast onto the SPE and then the metal nano-particles were electrodeposited onto the monolith material

VERSATILITY IN THE MODERN PERFORMER: THREE DIVERSE OPERA ROLES

This dissertation project consisted of performances of three diverse operatic roles. The goal was to examine the challenges and benefits of performing diverse repertoire (baroque, classical, and romantic opera, in this case) and to observe how vocal and acting techniques might adjust to different styles and voice classifications. On December 3, 5, 11, and 13,2003, I performed a composite role in Fatal Song, directed by Leon Major, in the Robert & Arlene Kogod Theatre. This opera pastiche, premiered in 1996, contains spoken dialogue, and the music originates from famous eighteenth and nineteenth-century operas. I explored the challenges and benefits of playing three different, well-known opera characters within the same opera, performing four different languages within the same opera, and performing spoken dialogue in an opera. My roles in this pastiche of famous opera included Lucia from Lucia di Lammermoor by Gaetano Donizetti, Manon from Manon by Jules Massenet, and Pamina from Die ZauberJlote by W.A. Mozart. On January 28 and 29, 2005, I performed the role of Nice in Eurilla e Alcindo, a serenata by Antonio Vivaldi, in Homer Ulrich Recital Hall; musical direction by Joseph Gascho and stage direction by Kate Vetter Cain. I explored the challenges and benefits of preparing baroque ornamentation, singing without a conductor, performing an unknown work, staging a work that is not traditionally staged, singing with minimal sets and costumes, and singing with period instruments. On April 16,20, and 24,2005, I performed the role of Musetta in Giacomo Puccini's La BohBme, directed by Pat Diamond and conducted by Jeffrey Rink, in the Ina & Jack Kay Theatre. I examined the challenges and benefits of singing with a large orchestra of modem instruments, singing Puccini rubato and coordinating this with the conductor, and singing a role in one of the most well-known operas in today's repertoire. As a result of this investigation, I concluded that singing different styles, and singing outside one's voice classification, within reason, is beneficial. The knowledge, skill, confidence and insight I acquired by becoming more versatile benefited me as a performer and as a teacher.

The use of morphological characteristics and texture analysis in the identification of tissue composition in prostatic neoplasia

Quantitative examination of prostate histology offers clues in the diagnostic classification of lesions and in the prediction of response to treatment and prognosis. To facilitate the collection of quantitative data, the development of machine vision systems is necessary. This study explored the use of imaging for identifying tissue abnormalities in prostate histology. Medium-power histological scenes were recorded from whole-mount radical prostatectomy sections at × 40 objective magnification and assessed by a pathologist as exhibiting stroma, normal tissue (nonneoplastic epithelial component), or prostatic carcinoma (PCa). A machine vision system was developed that divided the scenes into subregions of 100 × 100 pixels and subjected each to image-processing techniques. Analysis of morphological characteristics allowed the identification of normal tissue. Analysis of image texture demonstrated that Haralick feature 4 was the most suitable for discriminating stroma from PCa. Using these morphological and texture measurements, it was possible to define a classification scheme for each subregion. The machine vision system is designed to integrate these classification rules and generate digital maps of tissue composition from the classification of subregions; 79.3% of subregions were correctly classified. Established classification rates have demonstrated the validity of the methodology on small scenes; a logical extension was to apply the methodology to whole slide images via scanning technology. The machine vision system is capable of classifying these images. The machine vision system developed in this project facilitates the exploration of morphological and texture characteristics in quantifying tissue composition. It also illustrates the potential of quantitative methods to provide highly discriminatory information in the automated identification of prostatic lesions using computer vision.