Avaliação da lipase extracelular de Pseudomonas cepacia para purificação em sistema bifásico aquoso

O presente trabalho teve como objetivo a produção de lipase a partir de Pseudomona cepacia por fermentação líquida em biorreator do tipo Bioflo III. As fermentações foram conduzidas a 150 rpm durante 96 horas a 30 °C. Analisou-se a atividade enzimática em diferentes condições de temperatura (20 a 50 °C) e pH (3,0 a 11,0), e obtiveram-se 37 °C e 8,0, as condições ótimas, respectivamente. Para avaliar a estabilidade térmica, a enzima foi incubada em temperaturas de 40, 50 e 60 °C durante 120 minutos. Em uma segunda etapa, foram realizados experimentos preliminares para verificar as condições adequadas de partição da enzima, bem como sua estabilidade e condições ótimas de hidrólise frente às modificações de temperatura e pH. Foram preparadas soluções de PEG 1500, 4000 e 6000 a 50% p/p e soluções tampão fosfato de pHs 6, 7 e 8. Foi feita a caracterização de um sistema bifásico aquoso (SBA) a partir da preparação de soluções estoques de PEG com massas molares de 1500, 4000 e 6000 (50% w/w) e tampão fosfato pH 6,7 e 8,0 (20% w/w de KH2PO4/K2HPO4). Esta caracterização do SBA posteriormente poderá ser utilizada para partição de lipases, bem como de biomoléculas que estejam dentro dessa faixa de pH.

Chemical sanitizers to control biofilms formed by two Pseudomonas species on stainless steel surface

The biofilm formation of Pseudomonas aeruginosa and Pseudomonas fluorescens on AISI 304 stainless steel in the presence of reconstituted skim milk under different temperatures was conducted, and the potential of three chemical sanitizers in removing the mono-species biofilms formed was compared. Pseudomonas aeruginosa cultivated in skim milk at 28 °C presented better growth rate (10.4 log CFU.mL-1) when compared with 3.7 and 4.2 log CFU.mL-1 for P. aeruginosa and P. fluorescens cultivated at 7 °C, respectively. Pseudomonas aeruginosa formed biofilm when cultivated at 28 °C. However, only the adhesion of P. aeruginosa and P. fluorescens was observed when incubated at 7 °C. The sodium dichloroisocyanurate was the most efficient sanitizer in the reduction of the adhered P. aeruginosa cells at 7 and 28 °C and those on the biofilm, respectively. The hydrogen peroxide was more effective in the reduction of adhered cells of P. fluorescens at 7 °C.

Production of medium-chain-length polyhydroxyalkanoate by Pseudomonas oleovorans grown in sugary cassava extract supplemented with andiroba oil

Pseudomonas oleovorans were grown on sugary cassava extracts supplemented with andiroba oil for the synthesis of a mediumchain- length polyhydroxyalkanoate (PHA MCL). The concentration of total sugars in the extract was approximately: 40 g/L in culture 1, 15 g/L in cultures 2 and 3, and 10 g/L in culture 4. Supplementation with 1% andiroba oil and 0.2 g/L of (NH4)2HPO4 was performed 6.5 hours after growth in culture 3, and supplementation with the same amount of andiroba oil and 2.4 g/L of (NH4)2HPO4 was performed at the beginning of growth in culture 4. The synthesis resulted mainly in 3-hydroxy-decanoate and 3-hydroxy-dodecanoate units; 3-hydroxy-butyrate, 3-hydroxy-hexanoate; and 3-hydroxy-octanoate monomers were also produced but in smaller proportions. P. oleovorans significantly accumulated PHA MCL in the deceleration phase of growth with an oxygen limitation but with sufficient nitrogen concentration to maintain cell growth. The sugary cassava extract supplemented with andiroba oil proved to be a potential substrate for PHA MCL production.

Extraction, purification and characterization of inhibitor of trypsin from Chenopodium quinoa seeds

Abstract A novel trypsin inhibitor of protease (CqTI) was purified from Chenopodium quinoa seeds. The optimal extracting solvent was 0.1M NaCl pH 6.8 (p < 0.05). The extraction time of 5h and 90 °C was optimum for the recovery of the trypsin inhibitor from C. quinoa seeds. The purification occurred in gel-filtration and reverse phase chromatography. CqTI presented active against commercial bovine trypsin and chymotrypsin and had a specific activity of 5,033.00 (TIU/mg), which was purified to 333.5-fold. The extent of purification was determined by SDS-PAGE. CqTI had an apparent molecular weight of approximately 12KDa and two bands in reduced conditions as determined by Tricine-SDS-PAGE. MALDI-TOF showed two peaks in 4,246.5 and 7,908.18m/z. CqTI presented high levels of essential amino acids. N-terminal amino acid sequence of this protein did not show similarity to any known protease inhibitor. Its activity was stable over a pH range (2-12), temperatures range (20-100 °C) and reducing agents.

Temperaturas para a germinação de sementes de capixingui (Croton floribundus - Spreng - Euphorbiaceae)

O presente trabalho objetivou avaliar a influência de diferentes temperaturas e da imersão em água na germinação de sementes de capixingui (Croton floribundus Spreng). Inicialmente, as sementes foram submetidas à germinação a 15, 20, 25, 30, 35, 40, 20-30 e 25-35ºC, com e sem imersão das mesmas em água fria (temperatura ambiente) por duas horas. Posteriormente, sementes sem imersão prévia em água fria foram submetidas à germinação a 20-25, 25-30, 30-35, 20-30, 25-35 e 20-35ºC. Foram avaliadas a porcentagem e a velocidade de germinação das sementes, a matéria seca e o comprimento de plântulas. Os dados foram submetidos à análise de variância, no delineamento inteiramente casualizado (DIC) e esquema fatorial 8 x 2 no primeiro experimento e no DIC com seis tratamentos no segundo experimento, com quatro repetições de 25 sementes, seguido da comparação de médias (Tukey a 5%). Não houve germinação a 15, 20 e 40ºC e esta foi mínima a 25ºC. As temperaturas alternadas de 20-30 e de 25-35ºC favoreceram o processo germinativo. A imersão das sementes em água fria não favoreceu a taxa de germinação. No segundo experimento, a maior germinação ocorreu a 20-30ºC. Assim, pode-se recomendar a temperatura de 20-30ºC para a condução do teste de germinação de sementes de capixingui, o qual pode ser encerrado aos 28 dias.

Hydrogen sulphide as inhibitor and substrates for the cytochrome c-cytochrome c oxidase system /

It has previously been recognized that the major biochemical toxicity induced by sulphide is due to an inhibition of cytochrome ~ oxidase. Inhibition of this enzyme occurs at 30°C and pH 7.4 with a Ki of approximately 0.2 ~M, and a kon of 104 M-1 s-l, under catalytic conditions. However, the equimo1ar mixture of sulphide and the enzyme shows identical catalytic behaviour to that of the native enzyme. This cannot readily be attributed to rapid dissociation of sulphide, as both spectroscopic and plot analysis indicate the koff value is low. The addition of stoichiometric sulphide to the resting oxidized enzyme gives rise to the appearance of a low-spin ferric-type spectrum not identical with that seen on the addition of excess sulphide to the enzyme aerobically. Sulphide added to the enzyme anaerobically gives rise to another low-spin, probably largely ferric, form which upon admission of oxygen is then converted into a 607 nm species closely resembling Compound C. The 607 nm form is probably the precursor of oxyferricytochrome aa3. The addition of successive a1iquots of Na2S solution to the enzyme induces initial uptake of approximately 3 moles of oxygen per mole of the enzyme. Thus, it is concluded that: 1. the initial product of sulphide-cytochrome c oxidase interaction is not an inhibited form of the enzyme, but the low-spin (oxyferri) ~3+~+ species; 2. a subsequent step in which sulphide reduces cytochrome ~ occurs; 3. the final inhibitory step, in which a further molecule of sulphide binds to the cytochrome ~ iron centre in the cytochrome ~2+~+ species, gives the cytochrome a2+~+-H2S form which is a half-reduced fully inhibited species;4. a 607 run form of the enzyme is produced which may be converted into a catalytically active low-spin (oxyferri) state; and therefore 5. liganded sulphide may be able to reduce the cytochrome 33 -Cu centre without securing the prior reduction of the cytochrome a_ haem group or the Cud centre associated with it.

An unusual postharvest spotting disease of the comercial mushroom, Agaricus bisporus, caused by a novel pathovar of Pseudomonas tolaasii

An unusual postharvest spotting disease of the commercial mushroom, Agaricus bisporus, which was observed on a commercial mushroom farm in Ontario, was found to be caused by a novel pathovar of Pseudomonas tolaasii. Isolations from the discoloured lesions, on the mushroom pilei, revealed the presence of several different bacterial and fungal genera. The most frequently isolated genus being Pseudomonas bacteria. The most frequently isolated fungal genus was Penicillium. Of the bacteria and fungi assayed for pathogenicity to mushrooms, only Pseudomonas tolaasii was able to reproduce the postharvest spotting symptom. This symptom was typically reproduced 1 to 7 days postharvest, when mushroom pilei were inoculated with 101 to 105 cfu. Of the fungi tested for pathogenicity only a Penicillium sp. and Verticillium fungicola were shown to be pathogenic, however, neither produced the postharvest spotting symptom. The Pseudomonas tolaasii strain isolated from the postharvest lesions differed from a type culture (Pseudomonas tolaasii ATCC 33618) in the symptoms it produced on Agaricus bisporus pilei under the same conditions and at the same inoculum concentration. It was therefore designated a pathovar. This strain also differed from the type culture in its cellular protein profile. Neither the type culture, nor the mushroom pathogen was found to contain plasmid DNA. The presence of plasmid DNA is therefore not responsible for the difference in pathogenicity between the two strains.

Skeletal muscle protein content of lipolytic inhibitor G(0)/G(1) switch gene-2 protein: the effect of endurance training

The first and rate-limiting step of lipolysis is the removal of the first fatty acid from a triglyceride molecule; it is catalyzed by adipose triglyceride lipase (ATGL). ATGL is co-activated by comparative gene identification-58 (CGI-58) and inhibited by the G(0)/G(1) switch gene-2 protein (G0S2). G0S2 has also recently been identified as a positive regulator of oxidative phosphorylation within the mitochondria. Previous research has demonstrated in cell culture, a dose dependent mechanism for inhibition by G0S2 on ATGL. However our data is not consistent with this hypothesis. There was no change in G0S2 protein content during an acute lipolytic inducing set of contractions in both whole muscle, and isolated mitochondria yet both ATGL and G0S2 increase following endurance training, in spite of the fact that there should be increased reliance on intramuscular lipolysis. Therefore, inhibition of ATGL by G0S2 appears to be regulated through more complicated intracellular or post-translation regulation.

Identificación de antígenos proteicos inmunocloneinantes de Pseudomonas aeruginosa, reconocidas por sueros de pacientes infectados (por) María del Rocío Galván García

Tesis (Maestría en Ciencias, con especialidad en Microbiología Médica) U.A.N.L.

Detección por PCR multiplexde pseudomonas aeruginosa, proteus mirabilis y malassezia SPP. en caninos con otitis externa.

Tesis (Maestría en Ciencia Animal) UANL, 2011.

Detección por PCR multiplex de pseudomonas aeruginosa, proteus mirabilis y malassezia SPP en caninos con otitis externa.

Tesis (Maestría en Ciencia Animal) UANL, 2011.

Modulation of epithelial sodium channel (ENaC) expression in mouse lung infected with Pseudomonas aeruginosa

Affiliation: André Dagenais: Centre hospitalier de l'Université de Montréal/ Hôtel-Dieu, Département de médecine, Université de Montréal. Yves Berthiaume: Médecine et spécialités médicales, Faculté de médecine

Influence d’un rince-bouche fluoré sur la corrosion galvanique entre un fil NiTi ou un fil CuNiTi et différents boîtiers orthodontiques : incidence sur les propriétés mécaniques des fils

Objectif : il a été rapporté que l’utilisation d’agents prophylactiques fluorés pouvait favoriser la corrosion galvanique au sein des alliages de titane. L’objectif de la présente étude était d’évaluer l’effet d’un rince-bouche fluoré sur les propriétés mécaniques de fils en nickel-titane (NiTi) et de fils en cuivre-nickel-titane (CuNiTi) lorsque ces derniers sont couplés à des boîtiers de compositions différentes (boîtiers de marques Smartclip, Clarity, et Sprint). Matériels et Méthodes : 90 segments de fils en NiTi et 90 segments de fils en CuNiTi ont été chacun couplés à 2 boîtiers de chaque marque. Chaque assemblage fil-boîtiers a été par la suite incubé pendant 3 heures à 37°C, soit dans une solution de fluore neutre (Fluorinse™ 0,05% NaF), soit dans une solution de salive artificielle (solution contrôle). Suite à l’incubation, les échantillons étaient nettoyés avec de l’eau déshydrogénée, les fils séparés des boîtiers et montés sur un support pour subir un test de pliage en trois points en milieu humide (salive artificielle) à 37°C. Les modules d’élasticité ainsi que les limites conventionnelles d’élasticité en activation et en désactivation ont été mesurés et comparés. Des analyses de Variance (ANOVA) et des comparaisons post-hoc avec la correction de Bonferronni ont été utilisées pour comparer les groupes entre eux (α = 0,05). Résultats : L’utilisation d’un rince-bouche fluoré a produit une réduction du module d’élasticité et de la limite conventionnelle d’élasticité en activation et en désactivation pour les fils en NiTi ; cependant, cet effet a été modulé par le type de boîtier auquel le fil a été couplé. Les propriétés mécaniques de fils en CuNiTi n’ont pas été affectées par le fluor, ou par le type de boîtier utilisé. Conclusions : L’utilisation d’un rince-bouche fluoré modifie les propriétés mécaniques des fils en NiTi seulement. Cet effet est modulé par le boîtier auquel le fil en NiTi est couplé. A la différence des autres études publiées dans la littérature, nos résultats ne nous permettent pas de conclure que la modification des propriétés mécaniques des fils en NiTi entrainerait obligatoirement un allongement de la durée du traitement orthodontique. Mots clés : Fluor, fils nickel-titane, boîtiers orthodontiques, corrosion galvanique, propriétés mécaniques.

Effets des fluorures sur l'activité antimicrobienne des antibiotiques contre Staphylococcus aureus et Pseudomonas aeruginosa

L’émergence des souches bactériennes résistantes aux antibiotiques est un phénomène inquiétant, qui se répand à travers le monde. Staphylococcus aureus et Pseudomonas aeruginosa sont des bactéries pathogènes opportunistes multi résistantes qui peuvent causer plusieurs maladies. Cependant, ces bactéries deviennent difficiles à traiter avec des antibiotiques sans occasionner de toxicité. Alors pour trouver des solutions, c’est nécessaire de développer de nouvelles molécules afin de combattre les agents pathogènes résistants. Grâce à leur action pharmacologique, les fluorures exercent un certain effet antibactérien au niveau de l'émail des dents; donc, leur association aux antibiotiques pourrait bien a méliorer l’activité antimicrobienne. De ce fait, nous nous sommes proposés d’étudier les activités in vitro de la vancomycine (VAN), l’oxacilline (OXA), la ceftazidime (CFT) et la méropenème (MER) libre ou associée au fluorure de sodium (NaF) et fluorure de lithium (LiF) qui ont été évaluées sur des souches S.aureus et P.aeruginosa sensibles et résistantes, par la méthode de la microdilution en bouillon, déterminant leur concentration minimale inhibitrice (CMI), leur concentration minimale bactéricide (CMB), leur courbe cinétique (Time-Kill). Leur cytotoxicité sur les globules rouges humains, et leur stabilité à la température de 4°C et 22°C ont été étudiées. Les associations des antimicrobiens aux dérivés des fluorures ont montré une amélioration de l’effet des antibiotiques par la réduction des leurs concentrations et toxicité pour traiter correctement ces pathogènes résistants. Par conséquent, des antibiotiques associés aux dérivés de fluorure pourraient devenir une option de traitement contre des souches résistantes afin de diminuer la toxicité causée par de fortes doses des antibiotiques conventionnels.

Caractérisation des souches de Pseudomonas aeruginosa isolées des patients atteints de la fibrose kystique par différentes méthodes de typage

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.