Sustainable Living. Environmental integration in 15 vernacular Spanish houses

This research was published online by the Spanish Ministry of Public Works in 2012. It collects 20 years of work that contributes to recognizing and enhancing the vernacular architecture in Spain, which has no known author, but has significant values and shows a wide variety of adaptation examples to climatic and environmental conditions. The research analyzes in detail and from different scales 15 houses in different climatic conditions and geographic regions in order to go deeper into the specific characteristics of each one of them from the perspective of sustainability. These houses are located in Tenerife, Salamanca, Huelva, Granada, Toledo, Madrid, Menorca, Alicante, Mallorca, Almería, La Coruña, Cantabria, Huesca and Lugo. The article analyzes the traditional dwelling, the natural environment and conditions that surround it and intends to discover the formal dialogue among them, as well as the origin of the design strategies

Parametric analysis on bridge reinforced concrete elevated pile-cap foundations

Current design practices recommend to comply with the capacity protection principle, which pays special attention to ensuring an elastic response of the foundations under ground motion events. However, in cases such as elevated reinforced concrete (RC) pile-cap foundation typologies, this design criterion may lead to conservative designs, with excessively high construction costs. Reinforced concrete elevated pile-cap foundations is a system formed by a group of partially embedded piles connected through an aboveground stayed cap and embedded in soil. In the cases when they are subjected to ground motions, the piles suffer large bending moments that make it difficult to maintain their behavior within the elastic range of deformations. Aiming to make an in-depth analysis of the nonlinear behavior of elevated pile-cap foundations, a cyclic loading test was performed on a concrete 2x3 pile configuration specimen of elevated pile-cap foundation. Two results of this test, the failure mechanism and the ductile behavior, were used for the calibration of a numerical model built in OpenSees framework, by using a pushover analysis. The calibration of the numerical model enabled an in-depth study of the seismic nonlinear response of this kind of foundations. A parametric analysis was carried for this purpose, aiming to study how sensitive RC elevated pile-cap foundations are, when subjected to variations in the diameter of piles, reinforcement ratios, external loads, soil density or multilayer configurations. This analysis provided a set of ductility factors that can be used as a reference for design practices and which correspond to each of the cases analyzed.

Proposal of a new indicator to define ductility applied to corroded steel reinforcement on concrete structures = Propuesta de un nuevo indicador para definir la ductilidad aplicada a la corrosión del acero de refuerzo en estructuras de hormigón

The carbonation of concrete or the chlorides ingress in such quantity to reach the level of bars is triggers of reinforcement corrosion. One of the most significant effects of reinforcing steel corrosion on reinforced concrete structures is the decline in the ductility-related properties of the steel. Reinforcement ductility has a decisive effect on the overall ductility of reinforced concrete structures. Different Codes classify the type of steel depending on their ductility defined by the minimum values of several parameters. Using indicators of ductility associating different properties can be advantageous on many occasions. It is considered necessary to define the ductility by means of a single parameter that considers strength values and deformation simultaneously. There are a number of criteria for defining steel ductility by a single parameter. The present experimental study addresses the variation in the ductility of concrete-embedded steel bars when exposed to accelerated corrosion. This paper analyzes the suitability of a new indicator of ductility used in corroded bars.

Application of PZT and FBG impedance sensors for structural health monitoring of reinforced concrete beams strengthened with FRP composite materials

Esta Tesis tiene como objetivo principal el desarrollo de métodos de identificación del daño que sean robustos y fiables, enfocados a sistemas estructurales experimentales, fundamentalmente a las estructuras de hormigón armado reforzadas externamente con bandas fibras de polímeros reforzados (FRP). El modo de fallo de este tipo de sistema estructural es crítico, pues generalmente es debido a un despegue repentino y frágil de la banda del refuerzo FRP originado en grietas intermedias causadas por la flexión. La detección de este despegue en su fase inicial es fundamental para prevenir fallos futuros, que pueden ser catastróficos. Inicialmente, se lleva a cabo una revisión del método de la Impedancia Electro-Mecánica (EMI), de cara a exponer sus capacidades para la detección de daño. Una vez la tecnología apropiada es seleccionada, lo que incluye un analizador de impedancias así como novedosos sensores PZT para monitorización inteligente, se ha diseñado un procedimiento automático basado en los registros de impedancias de distintas estructuras de laboratorio. Basándonos en el hecho de que las mediciones de impedancias son posibles gracias a una colocación adecuada de una red de sensores PZT, la estimación de la presencia de daño se realiza analizando los resultados de distintos indicadores de daño obtenidos de la literatura. Para que este proceso sea automático y que no sean necesarios conocimientos previos sobre el método EMI para realizar un experimento, se ha diseñado e implementado un Interfaz Gráfico de Usuario, transformando la medición de impedancias en un proceso fácil e intuitivo. Se evalúa entonces el daño a través de los correspondientes índices de daño, intentando estimar no sólo su severidad, sino también su localización aproximada. El desarrollo de estos experimentos en cualquier estructura genera grandes cantidades de datos que han de ser procesados, y algunas veces los índices de daño no son suficientes para una evaluación completa de la integridad de una estructura. En la mayoría de los casos se pueden encontrar patrones de daño en los datos, pero no se tiene información a priori del estado de la estructura. En este punto, se ha hecho una importante investigación en técnicas de reconocimiento de patrones particularmente en aprendizaje no supervisado, encontrando aplicaciones interesantes en el campo de la medicina. De ahí surge una idea creativa e innovadora: detectar y seguir la evolución del daño en distintas estructuras como si se tratase de un cáncer propagándose por el cuerpo humano. En ese sentido, las lecturas de impedancias se emplean como información intrínseca de la salud de la propia estructura, de forma que se pueden aplicar las mismas técnicas que las empleadas en la investigación del cáncer. En este caso, se ha aplicado un algoritmo de clasificación jerárquica dado que ilustra además la clasificación de los datos de forma gráfica, incluyendo información cualitativa y cuantitativa sobre el daño. Se ha investigado la efectividad de este procedimiento a través de tres estructuras de laboratorio, como son una viga de aluminio, una unión atornillada de aluminio y un bloque de hormigón reforzado con FRP. La primera ayuda a mostrar la efectividad del método en sencillos escenarios de daño simple y múltiple, de forma que las conclusiones extraídas se aplican sobre los otros dos, diseñados para simular condiciones de despegue en distintas estructuras. Demostrada la efectividad del método de clasificación jerárquica de lecturas de impedancias, se aplica el procedimiento sobre las estructuras de hormigón armado reforzadas con bandas de FRP objeto de esta tesis, detectando y clasificando cada estado de daño. Finalmente, y como alternativa al anterior procedimiento, se propone un método para la monitorización continua de la interfase FRP-Hormigón, a través de una red de sensores FBG permanentemente instalados en dicha interfase. De esta forma, se obtienen medidas de deformación de la interfase en condiciones de carga continua, para ser implementadas en un modelo de optimización multiobjetivo, cuya solución se haya por medio de una expansión multiobjetivo del método Particle Swarm Optimization (PSO). La fiabilidad de este último método de detección se investiga a través de sendos ejemplos tanto numéricos como experimentales. ABSTRACT This thesis aims to develop robust and reliable damage identification methods focused on experimental structural systems, in particular Reinforced Concrete (RC) structures externally strengthened with Fiber Reinforced Polymers (FRP) strips. The failure mode of this type of structural system is critical, since it is usually due to sudden and brittle debonding of the FRP reinforcement originating from intermediate flexural cracks. Detection of the debonding in its initial stage is essential thus to prevent future failure, which might be catastrophic. Initially, a revision of the Electro-Mechanical Impedance (EMI) method is carried out, in order to expose its capabilities for local damage detection. Once the appropriate technology is selected, which includes impedance analyzer as well as novel PZT sensors for smart monitoring, an automated procedure has been design based on the impedance signatures of several lab-scale structures. On the basis that capturing impedance measurements is possible thanks to an adequately deployed PZT sensor network, the estimation of damage presence is done by analyzing the results of different damage indices obtained from the literature. In order to make this process automatic so that it is not necessary a priori knowledge of the EMI method to carry out an experimental test, a Graphical User Interface has been designed, turning the impedance measurements into an easy and intuitive procedure. Damage is then assessed through the analysis of the corresponding damage indices, trying to estimate not only the damage severity, but also its approximate location. The development of these tests on any kind of structure generates large amounts of data to be processed, and sometimes the information provided by damage indices is not enough to achieve a complete analysis of the structural health condition. In most of the cases, some damage patterns can be found in the data, but none a priori knowledge of the health condition is given for any structure. At this point, an important research on pattern recognition techniques has been carried out, particularly on unsupervised learning techniques, finding interesting applications in the medicine field. From this investigation, a creative and innovative idea arose: to detect and track the evolution of damage in different structures, as if it were a cancer propagating through a human body. In that sense, the impedance signatures are used to give intrinsic information of the health condition of the structure, so that the same clustering algorithms applied in the cancer research can be applied to the problem addressed in this dissertation. Hierarchical clustering is then applied since it also provides a graphical display of the clustered data, including quantitative and qualitative information about damage. The performance of this approach is firstly investigated using three lab-scale structures, such as a simple aluminium beam, a bolt-jointed aluminium beam and an FRP-strengthened concrete specimen. The first one shows the performance of the method on simple single and multiple damage scenarios, so that the first conclusions can be extracted and applied to the other two experimental tests, which are designed to simulate a debonding condition on different structures. Once the performance of the impedance-based hierarchical clustering method is proven to be successful, it is then applied to the structural system studied in this dissertation, the RC structures externally strengthened with FRP strips, where the debonding failure in the interface between the FRP and the concrete is successfully detected and classified, proving thus the feasibility of this method. Finally, as an alternative to the previous approach, a continuous monitoring procedure of the FRP-Concrete interface is proposed, based on an FBGsensors Network permanently deployed within that interface. In this way, strain measurements can be obtained under controlled loading conditions, and then they are used in order to implement a multi-objective model updating method solved by a multi-objective expansion of the Particle Swarm Optimization (PSO) method. The feasibility of this last proposal is investigated and successfully proven on both numerical and experimental RC beams strengthened with FRP.

Nonlinear seismic behaviour of concrete arch bridges

Arch bridge structural solution has been known for centuries, in fact the simple nature of arch that require low tension and shear strength was an advantage as the simple materials like stone and brick were the only option back in ancient centuries. By the pass of time especially after industrial revolution, the new materials were adopted in construction of arch bridges to reach longer spans. Nowadays one long span arch bridge is made of steel, concrete or combination of these two as "CFST", as the result of using these high strength materials, very long spans can be achieved. The current record for longest arch belongs to Chaotianmen bridge over Yangtze river in China with 552 meters span made of steel and the longest reinforced concrete type is Wanxian bridge which also cross the Yangtze river through a 420 meters span. Today the designer is no longer limited by span length as long as arch bridge is the most applicable solution among other approaches, i.e. cable stayed and suspended bridges are more reasonable if very long span is desired. Like any super structure, the economical and architectural aspects in construction of a bridge is extremely important, in other words, as a narrower bridge has better appearance, it also require smaller volume of material which make the design more economical. Design of such bridge, beside the high strength materials, requires precise structural analysis approaches capable of integrating the combination of material behaviour and complex geometry of structure and various types of loads which may be applied to bridge during its service life. Depend on the design strategy, analysis may only evaluates the linear elastic behaviour of structure or consider the nonlinear properties as well. Although most of structures in the past were designed to act in their elastic range, the rapid increase in computational capacity allow us to consider different sources of nonlinearities in order to achieve a more realistic evaluations where the dynamic behaviour of bridge is important especially in seismic zones where large movements may occur or structure experience P - _ effect during the earthquake. The above mentioned type of analysis is computationally expensive and very time consuming. In recent years, several methods were proposed in order to resolve this problem. Discussion of recent developments on these methods and their application on long span concrete arch bridges is the main goal of this research. Accordingly available long span concrete arch bridges have been studied to gather the critical information about their geometrical aspects and properties of their materials. Based on concluded information, several concrete arch bridges were designed for further studies. The main span of these bridges range from 100 to 400 meters. The Structural analysis methods implemented in in this study are as following: Elastic Analysis: Direct Response History Analysis (DRHA): This method solves the direct equation of motion over time history of applied acceleration or imposed load in linear elastic range. Modal Response History Analysis (MRHA): Similar to DRHA, this method is also based on time history, but the equation of motion is simplified to single degree of freedom system and calculates the response of each mode independently. Performing this analysis require less time than DRHA. Modal Response Spectrum Analysis (MRSA): As it is obvious from its name, this method calculates the peak response of structure for each mode and combine them using modal combination rules based on the introduced spectra of ground motion. This method is expected to be fastest among Elastic analysis. Inelastic Analysis: Nonlinear Response History Analysis (NL-RHA): The most accurate strategy to address significant nonlinearities in structural dynamics is undoubtedly the nonlinear response history analysis which is similar to DRHA but extended to inelastic range by updating the stiffness matrix for every iteration. This onerous task, clearly increase the computational cost especially for unsymmetrical buildings that requires to be analyzed in a full 3D model for taking the torsional effects in to consideration. Modal Pushover Analysis (MPA): The Modal Pushover Analysis is basically the MRHA but extended to inelastic stage. After all, the MRHA cannot solve the system of dynamics because the resisting force fs(u; u_ ) is unknown for inelastic stage. The solution of MPA for this obstacle is using the previously recorded fs to evaluate system of dynamics. Extended Modal Pushover Analysis (EMPA): Expanded Modal pushover is a one of very recent proposed methods which evaluates response of structure under multi-directional excitation using the modal pushover analysis strategy. In one specific mode,the original pushover neglect the contribution of the directions different than characteristic one, this is reasonable in regular symmetric building but a structure with complex shape like long span arch bridges may go through strong modal coupling. This method intend to consider modal coupling while it take same time of computation as MPA. Coupled Nonlinear Static Pushover Analysis (CNSP): The EMPA includes the contribution of non-characteristic direction to the formal MPA procedure. However the static pushovers in EMPA are performed individually for every mode, accordingly the resulted values from different modes can be combined but this is only valid in elastic phase; as soon as any element in structure starts yielding the neutral axis of that section is no longer fixed for both response during the earthquake, meaning the longitudinal deflection unavoidably affect the transverse one or vice versa. To overcome this drawback, the CNSP suggests executing pushover analysis for governing modes of each direction at the same time. This strategy is estimated to be more accurate than MPA and EMPA, moreover the calculation time is reduced because only one pushover analysis is required. Regardless of the strategy, the accuracy of structural analysis is highly dependent on modelling and numerical integration approaches used in evaluation of each method. Therefore the widely used Finite Element Method is implemented in process of all analysis performed in this research. In order to address the study, chapter 2, starts with gathered information about constructed long span arch bridges, this chapter continuous with geometrical and material definition of new models. Chapter 3 provides the detailed information about structural analysis strategies; furthermore the step by step description of procedure of all methods is available in Appendix A. The document ends with the description of results and conclusion of chapter 4.

Hacia un análisis cuantitativo de la Ciudad Informal: una aproximación desde la Habitabilidad Básica y la experiencia en Makeni (Sierra Leona)

La importantísima expansión urbana que sufren las principales ciudades de los países en vías de desarrollo, es el mayor reto que afronta la habitabilidad a nivel mundial. Dentro de la teoría general de la Habitabilidad Básica (HaB-ETSAM-UPM, 1995) la ordenación del territorio y el planeamiento urbanístico son las herramientas determinantes para orientar coherentemente los procesos de urbanización, como se reconoce también desde las principales esferas técnicas a nivel internacional. Pero tales herramientas deben enfocarse a una construcción eficiente del territorio, actuando desde una aproximación multidisciplinar, flexible y directa, que incida en las prioridades específicas de cada contexto. Para ello, resulta fundamental comprender a fondo las realidades específicas de estos ámbitos. La ciudad es un fenómeno complejo en esencia. El tejido construido, en constante proceso de cambio, es el caparazón visible que alberga una maravillosa mezcla entrelazada de espacios, funciones, flujos, personas.... Cada ciudad, diferente y única, se integra en su medio, se adapta a geografías, contextos y climas distintos, evoluciona según dinámicas propias, en incomprensibles (o casi) procesos evolutivos. El estudio de la ciudad, supone siempre una simplificación de la misma. La realidad urbana, por detallado que sea nuestro análisis, siempre contendrá indescifrables relaciones que se nos escapan. En cambio, necesitamos de métodos analíticos que nos ayuden a comprender algo esa complejidad. Acercarnos en ese análisis, es un paso previo fundamental para la formulación de respuestas. En este plano, de avance en la comprensión del hecho urbano, se sitúa este trabajo. Se pone el acento en el enfoque cuantitativo, profundizando en datos básicos concretos, siempre aceptando de partida que esta información es una componente mínima, pero esperamos que sustantiva, de un fenómeno inabordable. Y es esta búsqueda de comprensión material y cuantitativa de la ciudad, el objetivo esencial de la investigación. Se pretende proporcionar una base detallada de aquéllos aspectos fundamentales, que pueden ser medidos en los entornos urbanos y que nos proporcionan información útil para el diagnóstico y las propuestas. Para ello, se aportan rangos y referencias deseables, a través de una herramienta para la comprensión y la valoración de cada contexto, la Matriz de Indicadores. Esta herramienta se concibe desde la reflexión a la aplicación práctica, a la utilidad directa, al aporte concreto para quien pueda servir. Ésta es la voluntad decidida con la que se aborda este trabajo, centrado en los entornos urbanos donde el aporte técnico es prioritario: la Ciudad Informal. La Ciudad Informal, entendida aquí como aquélla que se desarrolla sin los medios suficientes (técnicos, económicos e institucionales) que proporciona la planificación, aquélla por donde la habitabilidad precaria se extiende. Es la ciudad que predomina en los países en vías de desarrollo, en los contextos de bajos recursos, allí donde, precisamente, se concentran los principales déficits y necesidades a nivel global. El enfoque nace de la teoría de la Habitabilidad Básica, de la definición de mínimos posibles para, desde allí, construir el espacio necesario para el desarrollo humano. Éste es el ámbito genérico objeto del trabajo que, a su vez, se nutre, de forma muy importante, de la experiencia directa en la ciudad de Makeni, en Sierra Leona. Esta ciudad nos sirve de prototipo experimental en un doble sentido. Por un lado, sirve como espacio empírico en el que chequear la metodología de valoración cuantitativa; y, por otro, el conocimiento de esta ciudad de tamaño medio africana, que se ha ido adquiriendo en los últimos cinco años, es una base directa para el desarrollo teórico de la propia metodología, que ayuda a atisbar lo esencial en contextos similares. El encaje de todo este recorrido se ha articulado desde una experiencia académica que, como docente, he coordinado directa e intensamente. Experiencia muy enriquecedora, que ha sumado muchas manos y mucho aprendizaje en este tiempo. Teoría y práctica en planeamiento urbano se alternan en el trabajo, nutriéndose la una de la otra y a la inversa. Trabajo que nace desde la pasión por la ciudad y el urbanismo. Desde la búsqueda por comprender y desde la vocación de actuar, de intentar mejorar y hacer más habitables los entornos urbanos. Especialmente allí donde las dificultades se agolpan y el camino se alarga, se llena de polvo. Acumular preguntas a cada paso. Cada vez más preguntas. Las respuestas, si existen, aparecen entrelazadas en dinámicas indescifrables de las que queremos formar parte. Fundirnos por momentos en la misma búsqueda, acompañarla. Sentirnos cerca de quiénes comienzan de cero casi cada día. Y otra vez, arrancar. Y compartir, desde el conocimiento, si acaso es que se puede. Y la ciudad. Brutal, imponente, asfixiante, maravillosa, imposible. Creación colectiva insuperable, de energías sumadas que se cosen sin patrón aparente. O sin más razón que la del propio pulso de la vida. Así se siente Makeni. ABSTRACT The important urban growth suffering major cities of developing countries, is the biggest challenge facing the global habitability. Within the general theory of Basic Habitability (HAB-ETSAM-UPM, 1995) spatial planning and urban planning are the crucial tools to consistently guide the urbanization process, as also recognized from the main technical areas worldwide. But such tools should focus on an efficient construction of the territory, working from a multidisciplinary, flexible and direct approach, that affects the specific priorities of each context. To do this, it is essential to thoroughly understand the specific realities of these areas. The city is essentially a complex phenomenon. The urban fabric in constant flux, is the visible shell that houses a wonderful mixture interlocking spaces, functions, flows, people.... Every city, different and unique, is integrated into its environment, adapted to geographies, contexts and climates, it evolves according to its own dynamics, along (almost) incomprehensible evolutionary processes. The study of the city, is always a simplification of it. The urban reality, even studied from a detailed analysis, always contain undecipherable relationships that escape us. Instead, we need analytical methods that help us understand something that complexity. Moving forward in this analysis is an essential first step in formulating responses. At this level, progressing in understand the urban reality, is where this work is located. The emphasis on the quantitative approach is placed, delving into specific basic data, starting always accepting that this information is just a minimal component, but we hope that substantive, of an intractable phenomenon. And it is this search for materials and quantitative understanding of the city, the main objective of the research. It is intended to provide a detailed basis of those fundamental aspects that can be measured in urban environments that provide us useful information for the diagnosis and proposals. To do this, desirable ranges and references are provided, through a tool for understanding and appreciation of each context, the Indicator Matrix. This tool is conceived from reflection to practical application, to a direct utility, concrete contribution to who can serve. This is the firm resolve with which this work is addressed, centered in urban environments where the technical contribution is a priority: the Informal City. The Informal City, understood here as the urban areas developed without the sufficient resources (technical, economic and institutional) which planning provides, where it is extended the precarious habitability. It is the city that prevails in developing countries, in low-resource settings, where, precisely, the main gaps and needs in the global context are concentrated. The approach stems from the theory of Basic Habitability, the definition of possible minimum, to build the necessary space for human development. This is the generic scope of the work object, that is also based in the direct experience in the town of Makeni, Sierra Leone. This city serves as an experimental prototype in two ways. On the one hand, it serves as a space where empirically check the quantitative assessment methodology; and, secondly, the knowledge of this African city of medium size, which has been acquired in the last five years, is a direct basis for the theoretical development of the methodology itself, which helps to glimpse the essence in similar contexts. The engagement of this whole journey has been articulated from an academic experience, directly and intensely coordinated as teacher. Enriching experience that has added many hands and much learning at this time. Theory and practice in urban planning are mixed at work, enriching the one of the other and vice versa. Work is born from the passion for the city and urbanism. From the search for understanding and from the vocation of acting, trying to improve and make more livable urban environments. Especially where the difficulties are crowded and the road is so long, full of dust. To accumulate questions at every turn. More and more questions. The answers, if do exist, appears inside indecipherable dynamics in which we want to be involved. Merge at times in the same search. Feel close to those who start from scratch almost every day. And again, move forward. And share, from knowledge, if possible. And the city. Brutal, impressive, suffocating, wonderful, impossible. Unsurpassed collective creation, combined energy mix that are sewn with no apparent pattern. Or for no reason other than the pulse of life itself. As it feels the city of Makeni.

Architecture Global Aid - Origami Houses (after tsunami houses), Tokyo, Miyagi, Giappone, 2013

This publication approaches the element of the "refuge" by showing several built prototypes designed and built by the author of this Ph.D and Yuko Ono that were effectively used as temporary shelters in Japan by the refugees in 2013. They consist on seven small wooden houses that can float and can also be packed into boxes and used as shelters following natural disasters. This publication explains both in Italian, English, Japanese and through small drawn diagrams the construction of these prototypes thanks to the help group "Architecture Global Aid" created by the author of this Ph.D in Japan (www.facebook.com/architectureglobalaid). Finally, this refuges can be as well seen in pages 660-664 of the Ph.D text were several kinds of architectures for shelters are analyzed. Esta publicación analiza el elemento del ?refugio? a través de varios ejemplos diseñados y construidos por la autora de este doctorado y la arquitecta Yuko Ono que fueron utilizados en la recuperación de Japón en el año 2013. Consisten en siete refugios de madera que pueden flotar y doblarse e introducirse en cajas del mismo material y de este modo, ser extraídos y empleados tras un desastre natural. Esta publicación explica en italiano, inglés, japonés y mediante varios diagramas, la construcción de estos prototipos gracias al grupo de ayuda ?Architecture Global Aid? creado por la autora de este doctorado en Japón (www.facebook.com/architectureglobalaid). Por último, la referencia a la investigación acerca de estos prototipos se puede encontrar en las páginas 660-664 de la tesis doctoral, entre las que se investiga también acerca de otras arquitecturas del refugio.

Energy efficiency evaluation of zero energy houses

Given the global energy and environmental situation, the European Union has been issuing directives with increasingly demanding requirements in term of the energy efficiency in buildings. The international competition of sustainable houses, Solar Decathlon Europe (SDE), is aligned with these European objectives. SDE houses are low energy solar buildings that must reach the near to zero energy houses’ goal. In the 2012 edition, in order to emphasize its significance, the Energy Efficiency Contest was added. SDE houses’ interior comfort, functioning and energy performance is monitored. The monitoring data can give an idea about the efficiency of the houses. However, a jury comprised by international experts is responsible for carrying out the houses energy efficiency evaluation. Passive strategies and houses services are analyzed. Additionally, the jury's assessment has been compared with the behavior of the houses during the monitoring period. Comparative studies make emphasis on the energy aspects, houses functioning and their interior comfort. Conclusions include thoughts related with the evaluation process, the results of the comparative studies and suggestions for the next competitions.

Behaviour of FRP confined concrete in square columns

A significant amount of research has been conducted on FRP-confined circular columns, but much less is known about rectangular/square columns in which the effectiveness of confinement is much reduced. This paper presents the results of experimental investigations on low strength square concrete columns confined with FRP. Axial compression tests were performed on ten intermediate size columns. The tests results indicate that FRP composites can significantly improve the bearing capacity and ductility of square section reinforced concrete columns with rounded corners. The strength enhancement ratio is greater the lower the concrete strength and also increases with the stiffness of the jacket. The confined concrete behaviour was predicted according to the more accepted theoretical models and compared with experimental results. There are two key parameters which critically influence the fitting of the models: the strain efficiency factor and the effect of confinement in non-circular sections.

La casa en imágenes : pulsos, ecos y huellas del habitar contemporáneo

La imagen fotográfica es un bloque espacio tiempo congelado, un fragmento referido al antes y el después de algo. Al contemplar una fotografía de un interior doméstico, descubrimos un entretejido sutil entre el habitante y su hábitat. Somos capaces de recaer en más detalles de los que el ojo humano puede apreciar en su visión cotidiana, siempre ligada al devenir espacio temporal. El acto de fotografiar el hogar, de congelar unidades habitadas infinitesimales, se revela como una manifestación radical del modo unipersonal de habitar de cada fotógrafo, profesional o aficionado, y por extensión, dado que hoy todos somos fotógrafos; de cada habitante. Por un lado, la fotografía se piensa aquí como herramienta, capaz de desvelar, de poner en el mundo, los elementos, percepciones y acontecimientos, que subyacen imbricados en la construcción del hogar. Por otro, la imagen se entiende como medio de expresión y de comunicación, como el lenguaje universal de nuestro tiempo, por todos conocido y utilizado. En este momento de interconexión máxima, entre redes, datos y capas de cognición, de velocidad y aceleración, esta tesis doctoral se plantea como una vuelta a la reflexión, a la contemplación del objeto imagen, desde la certeza de que para que ésta hable hay que darle tiempo. Así, la investigación hay que entenderla desde una base ontológica y fenomenológica; desde la experiencia del ser que habita un entorno concreto y determinado. Se enmarca en el actual entorno socio cultural de occidente, se busca desvelar el significado y modo de habitar del habitante común, poniendo de manifiesto aquello que acontece para que una casa cualquiera, de un habitante cualquiera, devenga hogar. Los primeros indicios sobre el tema surgirán del análisis y la reinterpretación hermenéutica de un atlas de imágenes del habitar: cuerpo de imágenes reunido a partir de series fotográficas de hogares, de habitantes anónimos, puestos a luz por la mirada de un grupo de artistas. Posteriormente, ponemos a prueba el conocimiento adquirido en el análisis anterior, mientras que expandimos la investigación hacia el sentir del habitante común, mediante la realización de tres experimentos participativos, o estudios de campo cualitativos. Los resultados, de ambos grupos de casos de estudio, se compilan, organizan y estructuran en una taxonomía del habitar. Esta taxonomía está compuesta por cuarenta y siete parámetros, que explicitan la naturaleza compleja del hogar del siglo XXI. Este hogar es entendido como un constructo personal de cada habitante, un proceso que acontece en el tiempo y en el espacio, y que entraña la propia construcción del habitante. Esta extensa taxonomía se organiza según tres ámbitos del ser humano, en el primero se expresan los factores relacionados con el modo de "estar físicamente" en el hogar, incluyendo: al propio habitante, la casa como espacio arquitectónico y como materialidad: objetos, muebles, iconos y símbolos que pueblan el hogar. En segundo lugar, se manifiestan los parámetros relacionados con el modo de “percibir”: por un lado, aquello que se deriva de lo que se ve, y por otro, lo que se deriva de aquello que no se ve, pero se siente. En tercer lugar, se explicitan los factores relativos al habitante que "crea/juega" su hogar, quién por un lado, es en el mundo actuando, y que por otro, siente el mundo construyéndolo mediante una serie de relaciones que establece con él. Finalmente, la investigación intenta revelar las sinergias, conexiones y relaciones, entre todos estos elementos extraídos del sentir del habitante común, y que fueron inducidos mediante el análisis y reinterpretación de los casos de estudio, poniendo de manifiesto un orden de cosas en el habitar occidental contemporáneo. ABSTRACT The photographic image is a frozen space time block, a fragment referred to a something before and after. When we stare at the photography of domestic interiors we discover a subtle interweaving between the inhabitant and her habitat. We are able to acknowledge infinite more details than the human eye, in its continuous quotidian vision always linked to the space time progression, appreciates. The act of photographing the home, of freezing infinitesimal inhabited units, reveals as a radical statement of the concept of inhabiting for each photographer, professional or amateur, and by extension, as we today all are photographers, for each inhabitant. On the one hand, photography is here conceived as a tool that is capable of revealing, "of placing in the world" the elements, perceptions and happenings that underlie imbricated in the construction of a home. On the other hand, image is thought as an expression and communication media, as the universal language of our time (as far as it is known and used by all of us). In this precise moment of maximum interconnection between networks, data and cognitive layers; of speed and acceleration, this PhD Dissertation is conceived as a return to reflection; to the contemplation of object image, from the certainty of its need of time for talking. Therefore, this research from an ontological and phenomenological base; from the experience of the self who inhabits a determined and concrete environment, that of the western countries at the present, pursues to unveil the meaning and way of inhabiting of a common dweller and manifest what conforms the transformation of any house, of any inhabitant into a home. The first clues will arise from the analysis and hermeneutical reinterpretation of the Atlas of inhabiting; an assembled body of images of anonymous inhabitants houses, brought into life through a group of artist´s glance. Afterwards, we will test the analysis´s acquired knowledge, while extending the investigation to the feel of the common inhabitant (and no longer the expert^ artist) through the execution of three participative experiments conceived as qualitative field works. The results of both case study groups, will be compiled, organized and structured in a taxonomy of the inhabiting. This taxonomy is composed by forty seven parameters that explicitly state the complex nature of the XXI century home, regarded as a personal construct of every single inhabitant, as a process that happens through time and space and that entails the construction of the inhabitant. This wide taxonomy is organized regarding three spheres of the human being, In first place, those elements related to the way of “physically being” at home are expressed, including: the inhabitant its self, the house as architectural space and as materiality: objects, furniture, icons and symbols that fill the home. In second place, parameters related to the way of “perceiving“ are manifested; on the one hand, those that derive from what we see; on the other hand, those that derive from what we do not see, but feel. In third place, those factors deriving from the inhabitant as a home "creator/player" who is acting in the world and feeling the world while constructing it through a myriad of relationships he establishes with it. Finally, the investigation tries to reveal the synergies, connections and relations between all these elements extracted from the feelings of the common inhabitant, induced through the analysis and reinterpretation of the case studies, and therefore exposing a state of things belonging to western world at present.

Analysis, reliability and optimization of reinforced concrete 2-D structures

In this paper a consistent analysis of reinforced concrete (RC) two-dimensional (2-D) structures,namely slab structures subjected to in-plane and out-plane forces, is presented. By using this method of analysis the well established methodology for dimensioning and verifying RC sections of beam structures is extended to 2-D structures. The validity of the proposed analysis results is checked by comparing them with some published experimental test results. Several examples show some of these proposed analysis features, such as the influence of the reinforcement layout on the service and ultimate behavior of a slab structure and the non straightforward problem of the optimal dimension at a slab point subjected to several loading cases. Also, in these examples, the method applications to design situations as multiple steel families and non orthogonal reinforcement layout are commented.

Radiological impact of cement, concrete and admixtures in Spain

It has been analyzed samples of portland cement (PC) with and without admixtures, samples of calcium aluminate cement (CAC) with different content of Al2O3 and specimens of concrete made with PC and CAC using High Resolution Gamma Spectrometry. The activity concentration index (I) is much less than 0.5 mSv y-1 for all the concrete specimens according to the Radiation protection document 112 of the European Commission. The PC without admixtures (CEM I 52,5 R) and the PC with addition of limestone (CEM II/BL 32,5 N) also have an I value much lower than 0.5 and the PC with the addition of fly ash and blast furnace slag (CEM IV/B (V) 32,5 N and III/A 42.5 N/SR) have an I value close to 0.6. The I value of the CAC used in the manufacture of structural precast concrete is of the order of 1 mSv y-1. Some of the CAC used in refractory concrete reaches a value close to 2 mSv y-1.