Contexto geológico e estrutural do Maciço Rio Apa, sul do Cráton amazônico - MS

Rio Apa Massif crops out in the Mato Grosso do Sul state and corresponds to the southeastern portion of the Amazonian Craton dominantly Paleoproterozoic in age. Rio Apa Complex is oldest and it is composed mainly by migmatitic orthogneisses, beyond amphybolites, tonalities and granodiorite. Alto Tererê Group is composed by schists, biotitemuscovite gneisses and micaceous quartzites generally rich in garnets, beyond metabasic rocks of low amphibolite facies. The Amoguijá Group is constituted by Alumiador Intrusive Suite, which is represented by a sieno to monzogranitic batholith and Serra da Bocaina Volcanic Suite composed of volcanoclastic rocks of alkali riolites to monzoriolites compositions and pyroclastic products. Overlaying towards East and South occurs Neoproterozoic metasedimentary rocks from the Paraguai Folded Belt (Cuiabá, Corumbá and Jacadigo Groups - Urucum Formation). Structural-metamorphic framewok is identified by five deformational phases but the actual tectonic and metamorphic structure shows the superposed tectonic array of the Paraguai Folded Belt. Rocks from Rio Apa Complex, Alto Tererê Group and Amoguijá Group record an older structural evolution defined by (Dn-1 and Dn). The deformational phases (Dn+1 and Dn+2) are visible mainly in rocks of Paraguai Folded Belt beyond the last deformation (Dn+3) that imprints all sequences.

Custos e rentabilidade do milho em função do manejo do solo e da adubação nitrogenada

Agronomic practices that help farmers to raise yield and reduce costs must be studied to ensure agricultural sustainability. Thus, the objective of this study was to analyze economically the effect of soil management and nitrogen fertilization in maize crops. Treatments consisted of a combination of 3 soil management techniques (plow harrows + floating harrows, chisel + floating harrows, and no-tillage), 5 periods of nitrogen fertilization (control - 0 kg ha -1 N; 120 kg ha -1 after sowing (S); 120 kg ha -1 in the V 6 stage; 30 kg ha -1 (S) + 90 kg ha -1 in V 6; 30 kg ha -1 (S) + 45 kg ha -1 in V 4 + 45 kg ha -1 in V 8 The total operating cost (TOC), gross revenue (GR), operating profit (OP), profitability index (PI), break-even yield, and break-even price were estimated. It was concluded that the no-tillage system, after 11 years of management, associated with nitrogen fertilization promotes positive PI and OP, being useful to farmers.

Infuěncia do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m 3sc, with a mean of operating cost of US$ 78.78 per work hour.

O novo cenário laboral latino-americano: regulaçao, proteçao e políticas ativas nos mercados de trabalho

Prólogo de Alicia Bárcena

Dependência estrutural da capacidade de rotação plástic em vigas de concreto armado

Summary In this work the structural dependence of plastic rotation capacity in RC beams is evaluated using the Finite Element Method. The objective is to achieve a better understanding of the non-linear behavior of reinforced concrete members and perform extensive parameter studies, using a rational model developed by Bigaj [1] to analyze the phenomenon of plastic rotation capacity in reinforced concrete members. It is assumed that only bending failure is relevant due to sufficient member resistance against shear and torsion. The paper begins with the physical and theoretical background of the phenomenon of plastic hinge development in RC structures. Special emphasis is laid on the issue of structural dependence of deformation capacity of plastic hinges in RC members. Member size dependence and influence of properties of construction materials were emphasized as well. The essential components of the Bigajs model for calculating the plastic rotation capacity are discussed. The behaviour of the plastic hinge is analysed taking into account the strain localisation in the damage zones of the hinge region. The Fictitious Crack Model (FCM) and the Compressive Damage Zone Model (CDZ) are adopted in a Fracture Mechanics approach to model the behaviour of concrete in tension and compression, respectively. The approach is implemented in FEMOOP, a FEM in-house solver under development, and applied to evaluate ductility in 2D beams. The models were generated with GiD, a pre-processor and post-processor developed by CIMNE, and analyzed with the capabilities implemented in FEMOOP. © Universitat Politècnica de Catalunya, Barcelona, España 2010.

Descentralização fiscal, políticas sociais e transferência de renda no Brasil

Incluye Bibliografía

Classificação Estrutural e Qualidade da Madeira do Clone GT 1 de Hevea brasiliensis Muell. Arg

Latex is the main product extracted from rubber trees (Hevea brasiliensis). In Brazil, at the end of the production cycle of latex, the wood of rubber tree is traditionally used for energy purposes, but several international studies have reported consolidated practices of adding value to it. The objective of this paper was to evaluate the quality of wood and classify it structurally based on its mechanical properties. Six 20-year-old trees of the clone GT 1 of rubber tree proceeding from Itajobi, State of Sao Paulo, Brazil were sampled. Reduced dimensions specimens in the radial direction of the wood were produced to evaluate the quality by compression parallel to the grain, static bending and Janka hardness tests. Two specimens, one from the lower log (since the ground up to breast height) and one from the higher log (from breast height up to 2.50 m) were produced for structural classification of the wood based on the characteristic strength in compression parallel to the grain (NBR 7190 norm, 1997). The wood was classified as C40 (fc0k ≥ 40 MPa) class. Results revealed that the strength was not statistically different in the radial direction (except for the Janka hardness), though tending to increase from pith to bark.

Avaliação de custos das internações de gestantes diabéticas de um Hospital Universitário do interior de São Paulo

This study aimed at identifying the hospitalization costs of pregnant women with Diabetes Mellitus (DM) at a University Hospital. It is an observational, quantitative study with descriptive data analysis. The direct and indirect costs available in the institution were identified in order to determine the hospitalization costs for patients diagnosed with DM during pregnancy and childbirth. By means of descriptive statistics, it was observed that 63.46% of the patients had caesarean delivery; the mean total cost was R$ 362.93 (U$ 218.10)/hospitalization during pregnancy, R$ 2,642.65 (U$ 1,588.13)/hospitalization for caesarean delivery, and R$ 2.319.77 (U$ 1,394.09)/hospitalization for vaginal delivery. It was concluded that the analysis of hospitalization costs for patients with DM is of utmost importance, since they are highcomplexity hospitalizations that require a large number of interventions, increasing thus the service costs.

Custos e viabilidade econômica da produção de casulos do bicho-da-seda

Sericiculture is characterized by the possibility of income generation in areas smaller than 10.0 ha and by the rationalization of family labor. Even considering this favorable scenario for the development of this activity, there is still a gap in the management of its economic factors in most of the rural properties within this chain, contributing negatively to their expansion. This study aimed at assessing the production cost and economic viability for producing silkworm cocoons, by using a case study conducted in a property located in Quatá, São Paulo State, Brazil. The main results for a production of 1,904 kg-1 of silkworm cocoons, with labor costs reaching 51.5% of the Effective Operating Cost and 35.5% of the Total Operating Cost, were a profitability index higher than 50% and an Internal Rate of Return of 9.68%, for the second production year, providing a good profitability rate for this agricultural segment, when we consider that the improved profitability of the producer is proportional to the best production indicators, particularly due to the fast return that this activity provides.

Mudança estrutural para a igualdade: Uma visão integrada do desenvolvimento. Trigésimo quarto período de sessões da CEPAL. Síntese

Versión en inglés y en español disponibles en Biblioteca

Qualidade estrutural de um latossolo vermelho submetido à compactação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelos matemáticos para problemas de dimensionamento de lotes com restrições de capacidade e custos de transporte

In this paper, capacitated lot sizing problems in which the classical lot sizing decisions are made considering the transportation costs of the manufactured products were studied. These costs are related to the necessary number of pallets or trucks to pack and/or transport the products from the factory to the warehouse. Three extensions of a mixed integer linear programming model from the literature are considered, representing general cases that are commonly found in companies. These models are tested and evaluated using an optimization package, and a Lagrangian heuristic was developed for one of the extensions proposed.

Caracterização biofísica e estrutural da metaloproteinase não-hemorrágica do veneno de Bothrops moojeni e da endo-β-glicanase do Bacillus subtilis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo estrutural de quinases dependentes de ciclinas por métodos de modelagem molecular comparativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo estrutural por RMN do peptídeo policatiônico polybine I de veneno da vespa social Polybia paulista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)